arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts

   1 /*
   2  * Copyright (c) 2016 Andreas Färber
   3  * Copyright (c) 2016 BayLibre, Inc.
   4  * Author: Neil Armstrong <narmstrong@kernel.org>
   5  *
   6  * This file is dual-licensed: you can use it either under the terms
   7  * of the GPL or the X11 license, at your option. Note that this dual
   8  * licensing only applies to this file, and not this project as a
   9  * whole.
  10  *
  11  *  a) This library is free software; you can redistribute it and/or
  12  *     modify it under the terms of the GNU General Public License as
  13  *     published by the Free Software Foundation; either version 2 of the
  14  *     License, or (at your option) any later version.
  15  *
  16  *     This library is distributed in the hope that it will be useful,
  17  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  18  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19  *     GNU General Public License for more details.
  20  *
  21  * Or, alternatively,
  22  *
  23  *  b) Permission is hereby granted, free of charge, to any person
  24  *     obtaining a copy of this software and associated documentation
  25  *     files (the "Software"), to deal in the Software without
  26  *     restriction, including without limitation the rights to use,
  27  *     copy, modify, merge, publish, distribute, sublicense, and/or
  28  *     sell copies of the Software, and to permit persons to whom the
  29  *     Software is furnished to do so, subject to the following
  30  *     conditions:
  31  *
  32  *     The above copyright notice and this permission notice shall be
  33  *     included in all copies or substantial portions of the Software.
  34  *
  35  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  36  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  37  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  38  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  39  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  40  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  41  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  42  *     OTHER DEALINGS IN THE SOFTWARE.
  43  */
  44
  45 /dts-v1/;
  46
  47 #include "meson-gxbb.dtsi"
  48 #include <dt-bindings/gpio/gpio.h>
  49 #include <dt-bindings/input/input.h>
  50
  51 / {
  52         compatible = "nexbox,a95x", "amlogic,meson-gxbb";
  53         model = "NEXBOX A95X";
  54
  55         aliases {
  56                 serial0 = &uart_AO;
  57         };
  58
  59         chosen {
  60                 stdout-path = "serial0:115200n8";
  61         };
  62
  63         memory@0 {
  64                 device_type = "memory";
  65                 reg = <0x0 0x0 0x0 0x40000000>;
  66         };
  67
  68         leds {
  69                 compatible = "gpio-leds";
  70                 blue {
  71                         label = "a95x:system-status";
  72                         gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
  73                         linux,default-trigger = "heartbeat";
  74                         default-state = "off";
  75                 };
  76         };
  77
  78         gpio-keys-polled {
  79                 compatible = "gpio-keys-polled";
  80                 #address-cells = <1>;
  81                 #size-cells = <0>;
  82                 poll-interval = <100>;
  83
  84                 button@0 {
  85                         label = "reset";
  86                         linux,code = <KEY_RESTART>;
  87                         gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
  88                 };
  89         };
  90
  91         vddio_card: gpio-regulator {
  92                 compatible = "regulator-gpio";
  93
  94                 regulator-name = "VDDIO_CARD";
  95                 regulator-min-microvolt = <1800000>;
  96                 regulator-max-microvolt = <3300000>;
  97
  98                 gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
  99                 gpios-states = <1>;
 100
 101                 /* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
 102                 states = <1800000 0
 103                           3300000 1>;
 104         };
 105
 106         vddio_boot: regulator-vddio_boot {
 107                 compatible = "regulator-fixed";
 108                 regulator-name = "VDDIO_BOOT";
 109                 regulator-min-microvolt = <1800000>;
 110                 regulator-max-microvolt = <1800000>;
 111         };
 112
 113         vddao_3v3: regulator-vddao_3v3 {
 114                 compatible = "regulator-fixed";
 115                 regulator-name = "VDDAO_3V3";
 116                 regulator-min-microvolt = <3300000>;
 117                 regulator-max-microvolt = <3300000>;
 118         };
 119
 120         vcc_3v3: regulator-vcc_3v3 {
 121                 compatible = "regulator-fixed";
 122                 regulator-name = "VCC_3V3";
 123                 regulator-min-microvolt = <3300000>;
 124                 regulator-max-microvolt = <3300000>;
 125         };
 126
 127         emmc_pwrseq: emmc-pwrseq {
 128                 compatible = "mmc-pwrseq-emmc";
 129                 reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
 130         };
 131
 132         wifi32k: wifi32k {
 133                 compatible = "pwm-clock";
 134                 #clock-cells = <0>;
 135                 clock-frequency = <32768>;
 136                 pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
 137         };
 138
 139         sdio_pwrseq: sdio-pwrseq {
 140                 compatible = "mmc-pwrseq-simple";
 141                 reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
 142                 clocks = <&wifi32k>;
 143                 clock-names = "ext_clock";
 144         };
 145
 146         cvbs-connector {
 147                 compatible = "composite-video-connector";
 148
 149                 port {
 150                         cvbs_connector_in: endpoint {
 151                                 remote-endpoint = <&cvbs_vdac_out>;
 152                         };
 153                 };
 154         };
 155
 156         hdmi-connector {
 157                 compatible = "hdmi-connector";
 158                 type = "a";
 159
 160                 port {
 161                         hdmi_connector_in: endpoint {
 162                                 remote-endpoint = <&hdmi_tx_tmds_out>;
 163                         };
 164                 };
 165         };
 166 };
 167
 168 &cvbs_vdac_port {
 169         cvbs_vdac_out: endpoint {
 170                 remote-endpoint = <&cvbs_connector_in>;
 171         };
 172 };
 173
 174 &ethmac {
 175         status = "okay";
 176         pinctrl-0 = <&eth_rmii_pins>;
 177         pinctrl-names = "default";
 178
 179         phy-handle = <&eth_phy0>;
 180         phy-mode = "rmii";
 181
 182         snps,reset-gpio = <&gpio GPIOZ_14 0>;
 183         snps,reset-delays-us = <0 10000 1000000>;
 184         snps,reset-active-low;
 185
 186         mdio {
 187                 compatible = "snps,dwmac-mdio";
 188                 #address-cells = <1>;
 189                 #size-cells = <0>;
 190
 191                 eth_phy0: ethernet-phy@0 {
 192                         /* IC Plus IP101GR (0x02430c54) */
 193                         reg = <0>;
 194                 };
 195         };
 196 };
 197
 198 &hdmi_tx {
 199         status = "okay";
 200         pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
 201         pinctrl-names = "default";
 202 };
 203
 204 &hdmi_tx_tmds_port {
 205         hdmi_tx_tmds_out: endpoint {
 206                 remote-endpoint = <&hdmi_connector_in>;
 207         };
 208 };
 209
 210 &ir {
 211         status = "okay";
 212         pinctrl-0 = <&remote_input_ao_pins>;
 213         pinctrl-names = "default";
 214 };
 215
 216 &pwm_ef {
 217         status = "okay";
 218         pinctrl-0 = <&pwm_e_pins>;
 219         pinctrl-names = "default";
 220         clocks = <&clkc CLKID_FCLK_DIV4>;
 221         clock-names = "clkin0";
 222 };
 223
 224 /* Wireless SDIO Module */
 225 &sd_emmc_a {
 226         status = "okay";
 227         pinctrl-0 = <&sdio_pins>;
 228         pinctrl-names = "default";
 229         #address-cells = <1>;
 230         #size-cells = <0>;
 231
 232         bus-width = <4>;
 233         cap-sd-highspeed;
 234         max-frequency = <100000000>;
 235
 236         non-removable;
 237         disable-wp;
 238
 239         mmc-pwrseq = <&sdio_pwrseq>;
 240
 241         vmmc-supply = <&vddao_3v3>;
 242         vqmmc-supply = <&vddio_boot>;
 243 };
 244
 245 /* SD card */
 246 &sd_emmc_b {
 247         status = "okay";
 248         pinctrl-0 = <&sdcard_pins>;
 249         pinctrl-names = "default";
 250
 251         bus-width = <4>;
 252         cap-sd-highspeed;
 253         max-frequency = <100000000>;
 254         disable-wp;
 255
 256         cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
 257         cd-inverted;
 258
 259         vmmc-supply = <&vddao_3v3>;
 260         vqmmc-supply = <&vddio_card>;
 261 };
 262
 263 /* eMMC */
 264 &sd_emmc_c {
 265         status = "okay";
 266         pinctrl-0 = <&emmc_pins>;
 267         pinctrl-names = "default";
 268
 269         bus-width = <8>;
 270         cap-sd-highspeed;
 271         cap-mmc-highspeed;
 272         max-frequency = <200000000>;
 273         non-removable;
 274         disable-wp;
 275         mmc-ddr-1_8v;
 276         mmc-hs200-1_8v;
 277
 278         mmc-pwrseq = <&emmc_pwrseq>;
 279         vmmc-supply = <&vcc_3v3>;
 280         vqmmc-supply = <&vddio_boot>;
 281 };
 282
 283 &uart_AO {
 284         status = "okay";
 285         pinctrl-0 = <&uart_ao_a_pins>;
 286         pinctrl-names = "default";
 287 };