arch/arm64/boot/dts/amlogic/meson-gx.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Copyright (c) 2016 Andreas Färber
   4  *
   5  * Copyright (c) 2016 BayLibre, SAS.
   6  * Author: Neil Armstrong <narmstrong@baylibre.com>
   7  *
   8  * Copyright (c) 2016 Endless Computers, Inc.
   9  * Author: Carlo Caione <carlo@endlessm.com>
  10  */
  11
  12 #include <dt-bindings/gpio/gpio.h>
  13 #include <dt-bindings/interrupt-controller/irq.h>
  14 #include <dt-bindings/interrupt-controller/arm-gic.h>
  15
  16 / {
  17         interrupt-parent = <&gic>;
  18         #address-cells = <2>;
  19         #size-cells = <2>;
  20
  21         reserved-memory {
  22                 #address-cells = <2>;
  23                 #size-cells = <2>;
  24                 ranges;
  25
  26                 /* 16 MiB reserved for Hardware ROM Firmware */
  27                 hwrom_reserved: hwrom@0 {
  28                         reg = <0x0 0x0 0x0 0x1000000>;
  29                         no-map;
  30                 };
  31
  32                 /* 2 MiB reserved for ARM Trusted Firmware (BL31) */
  33                 secmon_reserved: secmon@10000000 {
  34                         reg = <0x0 0x10000000 0x0 0x200000>;
  35                         no-map;
  36                 };
  37
  38                 /* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */
  39                 secmon_reserved_alt: secmon@5000000 {
  40                         reg = <0x0 0x05000000 0x0 0x300000>;
  41                         no-map;
  42                 };
  43
  44                 linux,cma {
  45                         compatible = "shared-dma-pool";
  46                         reusable;
  47                         size = <0x0 0x10000000>;
  48                         alignment = <0x0 0x400000>;
  49                         linux,cma-default;
  50                 };
  51         };
  52
  53         cpus {
  54                 #address-cells = <0x2>;
  55                 #size-cells = <0x0>;
  56
  57                 cpu0: cpu@0 {
  58                         device_type = "cpu";
  59                         compatible = "arm,cortex-a53", "arm,armv8";
  60                         reg = <0x0 0x0>;
  61                         enable-method = "psci";
  62                         next-level-cache = <&l2>;
  63                         clocks = <&scpi_dvfs 0>;
  64                 };
  65
  66                 cpu1: cpu@1 {
  67                         device_type = "cpu";
  68                         compatible = "arm,cortex-a53", "arm,armv8";
  69                         reg = <0x0 0x1>;
  70                         enable-method = "psci";
  71                         next-level-cache = <&l2>;
  72                         clocks = <&scpi_dvfs 0>;
  73                 };
  74
  75                 cpu2: cpu@2 {
  76                         device_type = "cpu";
  77                         compatible = "arm,cortex-a53", "arm,armv8";
  78                         reg = <0x0 0x2>;
  79                         enable-method = "psci";
  80                         next-level-cache = <&l2>;
  81                         clocks = <&scpi_dvfs 0>;
  82                 };
  83
  84                 cpu3: cpu@3 {
  85                         device_type = "cpu";
  86                         compatible = "arm,cortex-a53", "arm,armv8";
  87                         reg = <0x0 0x3>;
  88                         enable-method = "psci";
  89                         next-level-cache = <&l2>;
  90                         clocks = <&scpi_dvfs 0>;
  91                 };
  92
  93                 l2: l2-cache0 {
  94                         compatible = "cache";
  95                 };
  96         };
  97
  98         arm-pmu {
  99                 compatible = "arm,cortex-a53-pmu";
 100                 interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
 101                              <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
 102                              <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
 103                              <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
 104                 interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
 105         };
 106
 107         psci {
 108                 compatible = "arm,psci-0.2";
 109                 method = "smc";
 110         };
 111
 112         timer {
 113                 compatible = "arm,armv8-timer";
 114                 interrupts = <GIC_PPI 13
 115                         (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
 116                              <GIC_PPI 14
 117                         (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
 118                              <GIC_PPI 11
 119                         (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
 120                              <GIC_PPI 10
 121                         (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
 122         };
 123
 124         xtal: xtal-clk {
 125                 compatible = "fixed-clock";
 126                 clock-frequency = <24000000>;
 127                 clock-output-names = "xtal";
 128                 #clock-cells = <0>;
 129         };
 130
 131         firmware {
 132                 sm: secure-monitor {
 133                         compatible = "amlogic,meson-gx-sm", "amlogic,meson-gxbb-sm";
 134                 };
 135         };
 136
 137         efuse: efuse {
 138                 compatible = "amlogic,meson-gx-efuse", "amlogic,meson-gxbb-efuse";
 139                 #address-cells = <1>;
 140                 #size-cells = <1>;
 141                 read-only;
 142
 143                 sn: sn@14 {
 144                         reg = <0x14 0x10>;
 145                 };
 146
 147                 eth_mac: eth_mac@34 {
 148                         reg = <0x34 0x10>;
 149                 };
 150
 151                 bid: bid@46 {
 152                         reg = <0x46 0x30>;
 153                 };
 154         };
 155
 156         scpi {
 157                 compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0";
 158                 mboxes = <&mailbox 1 &mailbox 2>;
 159                 shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
 160
 161                 scpi_clocks: clocks {
 162                         compatible = "arm,scpi-clocks";
 163
 164                         scpi_dvfs: scpi_clocks@0 {
 165                                 compatible = "arm,scpi-dvfs-clocks";
 166                                 #clock-cells = <1>;
 167                                 clock-indices = <0>;
 168                                 clock-output-names = "vcpu";
 169                         };
 170                 };
 171
 172                 scpi_sensors: sensors {
 173                         compatible = "amlogic,meson-gxbb-scpi-sensors", "arm,scpi-sensors";
 174                         #thermal-sensor-cells = <1>;
 175                 };
 176         };
 177
 178         soc {
 179                 compatible = "simple-bus";
 180                 #address-cells = <2>;
 181                 #size-cells = <2>;
 182                 ranges;
 183
 184                 cbus: bus@c1100000 {
 185                         compatible = "simple-bus";
 186                         reg = <0x0 0xc1100000 0x0 0x100000>;
 187                         #address-cells = <2>;
 188                         #size-cells = <2>;
 189                         ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;
 190
 191                         gpio_intc: interrupt-controller@9880 {
 192                                 compatible = "amlogic,meson-gpio-intc";
 193                                 reg = <0x0 0x9880 0x0 0x10>;
 194                                 interrupt-controller;
 195                                 #interrupt-cells = <2>;
 196                                 amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
 197                                 status = "disabled";
 198                         };
 199
 200                         reset: reset-controller@4404 {
 201                                 compatible = "amlogic,meson-gx-reset", "amlogic,meson-gxbb-reset";
 202                                 reg = <0x0 0x04404 0x0 0x9c>;
 203                                 #reset-cells = <1>;
 204                         };
 205
 206                         uart_A: serial@84c0 {
 207                                 compatible = "amlogic,meson-gx-uart";
 208                                 reg = <0x0 0x84c0 0x0 0x18>;
 209                                 interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
 210                                 status = "disabled";
 211                         };
 212
 213                         uart_B: serial@84dc {
 214                                 compatible = "amlogic,meson-gx-uart";
 215                                 reg = <0x0 0x84dc 0x0 0x18>;
 216                                 interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
 217                                 status = "disabled";
 218                         };
 219
 220                         i2c_A: i2c@8500 {
 221                                 compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
 222                                 reg = <0x0 0x08500 0x0 0x20>;
 223                                 interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
 224                                 #address-cells = <1>;
 225                                 #size-cells = <0>;
 226                                 status = "disabled";
 227                         };
 228
 229                         pwm_ab: pwm@8550 {
 230                                 compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
 231                                 reg = <0x0 0x08550 0x0 0x10>;
 232                                 #pwm-cells = <3>;
 233                                 status = "disabled";
 234                         };
 235
 236                         pwm_cd: pwm@8650 {
 237                                 compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
 238                                 reg = <0x0 0x08650 0x0 0x10>;
 239                                 #pwm-cells = <3>;
 240                                 status = "disabled";
 241                         };
 242
 243                         saradc: adc@8680 {
 244                                 compatible = "amlogic,meson-saradc";
 245                                 reg = <0x0 0x8680 0x0 0x34>;
 246                                 #io-channel-cells = <1>;
 247                                 interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
 248                                 status = "disabled";
 249                         };
 250
 251                         pwm_ef: pwm@86c0 {
 252                                 compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
 253                                 reg = <0x0 0x086c0 0x0 0x10>;
 254                                 #pwm-cells = <3>;
 255                                 status = "disabled";
 256                         };
 257
 258                         uart_C: serial@8700 {
 259                                 compatible = "amlogic,meson-gx-uart";
 260                                 reg = <0x0 0x8700 0x0 0x18>;
 261                                 interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
 262                                 status = "disabled";
 263                         };
 264
 265                         i2c_B: i2c@87c0 {
 266                                 compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
 267                                 reg = <0x0 0x087c0 0x0 0x20>;
 268                                 interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
 269                                 #address-cells = <1>;
 270                                 #size-cells = <0>;
 271                                 status = "disabled";
 272                         };
 273
 274                         i2c_C: i2c@87e0 {
 275                                 compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
 276                                 reg = <0x0 0x087e0 0x0 0x20>;
 277                                 interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
 278                                 #address-cells = <1>;
 279                                 #size-cells = <0>;
 280                                 status = "disabled";
 281                         };
 282
 283                         spicc: spi@8d80 {
 284                                 compatible = "amlogic,meson-gx-spicc";
 285                                 reg = <0x0 0x08d80 0x0 0x80>;
 286                                 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 287                                 #address-cells = <1>;
 288                                 #size-cells = <0>;
 289                                 status = "disabled";
 290                         };
 291
 292                         spifc: spi@8c80 {
 293                                 compatible = "amlogic,meson-gx-spifc", "amlogic,meson-gxbb-spifc";
 294                                 reg = <0x0 0x08c80 0x0 0x80>;
 295                                 #address-cells = <1>;
 296                                 #size-cells = <0>;
 297                                 status = "disabled";
 298                         };
 299
 300                         watchdog@98d0 {
 301                                 compatible = "amlogic,meson-gx-wdt", "amlogic,meson-gxbb-wdt";
 302                                 reg = <0x0 0x098d0 0x0 0x10>;
 303                                 clocks = <&xtal>;
 304                         };
 305                 };
 306
 307                 gic: interrupt-controller@c4301000 {
 308                         compatible = "arm,gic-400";
 309                         reg = <0x0 0xc4301000 0 0x1000>,
 310                               <0x0 0xc4302000 0 0x2000>,
 311                               <0x0 0xc4304000 0 0x2000>,
 312                               <0x0 0xc4306000 0 0x2000>;
 313                         interrupt-controller;
 314                         interrupts = <GIC_PPI 9
 315                                 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
 316                         #interrupt-cells = <3>;
 317                         #address-cells = <0>;
 318                 };
 319
 320                 sram: sram@c8000000 {
 321                         compatible = "amlogic,meson-gx-sram", "amlogic,meson-gxbb-sram", "mmio-sram";
 322                         reg = <0x0 0xc8000000 0x0 0x14000>;
 323
 324                         #address-cells = <1>;
 325                         #size-cells = <1>;
 326                         ranges = <0 0x0 0xc8000000 0x14000>;
 327
 328                         cpu_scp_lpri: scp-shmem@0 {
 329                                 compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem";
 330                                 reg = <0x13000 0x400>;
 331                         };
 332
 333                         cpu_scp_hpri: scp-shmem@200 {
 334                                 compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem";
 335                                 reg = <0x13400 0x400>;
 336                         };
 337                 };
 338
 339                 aobus: bus@c8100000 {
 340                         compatible = "simple-bus";
 341                         reg = <0x0 0xc8100000 0x0 0x100000>;
 342                         #address-cells = <2>;
 343                         #size-cells = <2>;
 344                         ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
 345
 346                         sysctrl_AO: sys-ctrl@0 {
 347                                 compatible = "amlogic,meson-gx-ao-sysctrl", "simple-mfd", "syscon";
 348                                 reg =  <0x0 0x0 0x0 0x100>;
 349
 350                                 pwrc_vpu: power-controller-vpu {
 351                                         compatible = "amlogic,meson-gx-pwrc-vpu";
 352                                         #power-domain-cells = <0>;
 353                                         amlogic,hhi-sysctrl = <&sysctrl>;
 354                                 };
 355
 356                                 clkc_AO: clock-controller {
 357                                         compatible = "amlogic,meson-gx-aoclkc";
 358                                         #clock-cells = <1>;
 359                                         #reset-cells = <1>;
 360                                 };
 361                         };
 362
 363                         cec_AO: cec@100 {
 364                                 compatible = "amlogic,meson-gx-ao-cec";
 365                                 reg = <0x0 0x00100 0x0 0x14>;
 366                                 interrupts = <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>;
 367                         };
 368
 369                         sec_AO: ao-secure@140 {
 370                                 compatible = "amlogic,meson-gx-ao-secure", "syscon";
 371                                 reg = <0x0 0x140 0x0 0x140>;
 372                                 amlogic,has-chip-id;
 373                         };
 374
 375                         uart_AO: serial@4c0 {
 376                                 compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
 377                                 reg = <0x0 0x004c0 0x0 0x18>;
 378                                 interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
 379                                 status = "disabled";
 380                         };
 381
 382                         uart_AO_B: serial@4e0 {
 383                                 compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
 384                                 reg = <0x0 0x004e0 0x0 0x18>;
 385                                 interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
 386                                 status = "disabled";
 387                         };
 388
 389                         i2c_AO: i2c@500 {
 390                                 compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
 391                                 reg = <0x0 0x500 0x0 0x20>;
 392                                 interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
 393                                 #address-cells = <1>;
 394                                 #size-cells = <0>;
 395                                 status = "disabled";
 396                         };
 397
 398                         pwm_AO_ab: pwm@550 {
 399                                 compatible = "amlogic,meson-gx-ao-pwm", "amlogic,meson-gxbb-ao-pwm";
 400                                 reg = <0x0 0x00550 0x0 0x10>;
 401                                 #pwm-cells = <3>;
 402                                 status = "disabled";
 403                         };
 404
 405                         ir: ir@580 {
 406                                 compatible = "amlogic,meson-gx-ir", "amlogic,meson-gxbb-ir";
 407                                 reg = <0x0 0x00580 0x0 0x40>;
 408                                 interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
 409                                 status = "disabled";
 410                         };
 411                 };
 412
 413                 periphs: periphs@c8834000 {
 414                         compatible = "simple-bus";
 415                         reg = <0x0 0xc8834000 0x0 0x2000>;
 416                         #address-cells = <2>;
 417                         #size-cells = <2>;
 418                         ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;
 419
 420                         hwrng: rng {
 421                                 compatible = "amlogic,meson-rng";
 422                                 reg = <0x0 0x0 0x0 0x4>;
 423                         };
 424                 };
 425
 426                 dmcbus: bus@c8838000 {
 427                         compatible = "simple-bus";
 428                         reg = <0x0 0xc8838000 0x0 0x400>;
 429                         #address-cells = <2>;
 430                         #size-cells = <2>;
 431                         ranges = <0x0 0x0 0x0 0xc8838000 0x0 0x400>;
 432
 433                         canvas: video-lut@48 {
 434                                 compatible = "amlogic,canvas";
 435                                 reg = <0x0 0x48 0x0 0x14>;
 436                         };
 437                 };
 438
 439                 hiubus: bus@c883c000 {
 440                         compatible = "simple-bus";
 441                         reg = <0x0 0xc883c000 0x0 0x2000>;
 442                         #address-cells = <2>;
 443                         #size-cells = <2>;
 444                         ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>;
 445
 446                         sysctrl: system-controller@0 {
 447                                 compatible = "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon";
 448                                 reg = <0 0 0 0x400>;
 449                         };
 450
 451                         mailbox: mailbox@404 {
 452                                 compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu";
 453                                 reg = <0 0x404 0 0x4c>;
 454                                 interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
 455                                              <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>,
 456                                              <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>;
 457                                 #mbox-cells = <1>;
 458                         };
 459                 };
 460
 461                 ethmac: ethernet@c9410000 {
 462                         compatible = "amlogic,meson-gx-dwmac", "amlogic,meson-gxbb-dwmac", "snps,dwmac";
 463                         reg = <0x0 0xc9410000 0x0 0x10000
 464                                0x0 0xc8834540 0x0 0x4>;
 465                         interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>;
 466                         interrupt-names = "macirq";
 467                         status = "disabled";
 468                 };
 469
 470                 apb: apb@d0000000 {
 471                         compatible = "simple-bus";
 472                         reg = <0x0 0xd0000000 0x0 0x200000>;
 473                         #address-cells = <2>;
 474                         #size-cells = <2>;
 475                         ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;
 476
 477                         sd_emmc_a: mmc@70000 {
 478                                 compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
 479                                 reg = <0x0 0x70000 0x0 0x800>;
 480                                 interrupts = <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>;
 481                                 status = "disabled";
 482                         };
 483
 484                         sd_emmc_b: mmc@72000 {
 485                                 compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
 486                                 reg = <0x0 0x72000 0x0 0x800>;
 487                                 interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
 488                                 status = "disabled";
 489                         };
 490
 491                         sd_emmc_c: mmc@74000 {
 492                                 compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
 493                                 reg = <0x0 0x74000 0x0 0x800>;
 494                                 interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>;
 495                                 status = "disabled";
 496                         };
 497                 };
 498
 499                 vpu: vpu@d0100000 {
 500                         compatible = "amlogic,meson-gx-vpu";
 501                         reg = <0x0 0xd0100000 0x0 0x100000>,
 502                               <0x0 0xc883c000 0x0 0x1000>,
 503                               <0x0 0xc8838000 0x0 0x1000>;
 504                         reg-names = "vpu", "hhi", "dmc";
 505                         interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
 506                         #address-cells = <1>;
 507                         #size-cells = <0>;
 508
 509                         /* CVBS VDAC output port */
 510                         cvbs_vdac_port: port@0 {
 511                                 reg = <0>;
 512                         };
 513
 514                         /* HDMI-TX output port */
 515                         hdmi_tx_port: port@1 {
 516                                 reg = <1>;
 517
 518                                 hdmi_tx_out: endpoint {
 519                                         remote-endpoint = <&hdmi_tx_in>;
 520                                 };
 521                         };
 522                 };
 523
 524                 hdmi_tx: hdmi-tx@c883a000 {
 525                         compatible = "amlogic,meson-gx-dw-hdmi";
 526                         reg = <0x0 0xc883a000 0x0 0x1c>;
 527                         interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
 528                         #address-cells = <1>;
 529                         #size-cells = <0>;
 530                         status = "disabled";
 531
 532                         /* VPU VENC Input */
 533                         hdmi_tx_venc_port: port@0 {
 534                                 reg = <0>;
 535
 536                                 hdmi_tx_in: endpoint {
 537                                         remote-endpoint = <&hdmi_tx_out>;
 538                                 };
 539                         };
 540
 541                         /* TMDS Output */
 542                         hdmi_tx_tmds_port: port@1 {
 543                                 reg = <1>;
 544                         };
 545                 };
 546         };
 547 };