arch/arm64/boot/dts/amlogic/meson-gx.dtsi

   1 /*
   2  * Copyright (c) 2016 Andreas Färber
   3  *
   4  * Copyright (c) 2016 BayLibre, SAS.
   5  * Author: Neil Armstrong <narmstrong@baylibre.com>
   6  *
   7  * Copyright (c) 2016 Endless Computers, Inc.
   8  * Author: Carlo Caione <carlo@endlessm.com>
   9  *
  10  * This file is dual-licensed: you can use it either under the terms
  11  * of the GPL or the X11 license, at your option. Note that this dual
  12  * licensing only applies to this file, and not this project as a
  13  * whole.
  14  *
  15  *  a) This library is free software; you can redistribute it and/or
  16  *     modify it under the terms of the GNU General Public License as
  17  *     published by the Free Software Foundation; either version 2 of the
  18  *     License, or (at your option) any later version.
  19  *
  20  *     This library is distributed in the hope that it will be useful,
  21  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  22  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  23  *     GNU General Public License for more details.
  24  *
  25  * Or, alternatively,
  26  *
  27  *  b) Permission is hereby granted, free of charge, to any person
  28  *     obtaining a copy of this software and associated documentation
  29  *     files (the "Software"), to deal in the Software without
  30  *     restriction, including without limitation the rights to use,
  31  *     copy, modify, merge, publish, distribute, sublicense, and/or
  32  *     sell copies of the Software, and to permit persons to whom the
  33  *     Software is furnished to do so, subject to the following
  34  *     conditions:
  35  *
  36  *     The above copyright notice and this permission notice shall be
  37  *     included in all copies or substantial portions of the Software.
  38  *
  39  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  40  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  41  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  42  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  43  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  44  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  45  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  46  *     OTHER DEALINGS IN THE SOFTWARE.
  47  */
  48
  49 #include <dt-bindings/gpio/gpio.h>
  50 #include <dt-bindings/interrupt-controller/irq.h>
  51 #include <dt-bindings/interrupt-controller/arm-gic.h>
  52
  53 / {
  54         interrupt-parent = <&gic>;
  55         #address-cells = <2>;
  56         #size-cells = <2>;
  57
  58         reserved-memory {
  59                 #address-cells = <2>;
  60                 #size-cells = <2>;
  61                 ranges;
  62
  63                 /* 16 MiB reserved for Hardware ROM Firmware */
  64                 hwrom_reserved: hwrom@0 {
  65                         reg = <0x0 0x0 0x0 0x1000000>;
  66                         no-map;
  67                 };
  68
  69                 /* 2 MiB reserved for ARM Trusted Firmware (BL31) */
  70                 secmon_reserved: secmon@10000000 {
  71                         reg = <0x0 0x10000000 0x0 0x200000>;
  72                         no-map;
  73                 };
  74
  75                 linux,cma {
  76                         compatible = "shared-dma-pool";
  77                         reusable;
  78                         size = <0x0 0xbc00000>;
  79                         alignment = <0x0 0x400000>;
  80                         linux,cma-default;
  81                 };
  82         };
  83
  84         cpus {
  85                 #address-cells = <0x2>;
  86                 #size-cells = <0x0>;
  87
  88                 cpu0: cpu@0 {
  89                         device_type = "cpu";
  90                         compatible = "arm,cortex-a53", "arm,armv8";
  91                         reg = <0x0 0x0>;
  92                         enable-method = "psci";
  93                         next-level-cache = <&l2>;
  94                         clocks = <&scpi_dvfs 0>;
  95                 };
  96
  97                 cpu1: cpu@1 {
  98                         device_type = "cpu";
  99                         compatible = "arm,cortex-a53", "arm,armv8";
 100                         reg = <0x0 0x1>;
 101                         enable-method = "psci";
 102                         next-level-cache = <&l2>;
 103                         clocks = <&scpi_dvfs 0>;
 104                 };
 105
 106                 cpu2: cpu@2 {
 107                         device_type = "cpu";
 108                         compatible = "arm,cortex-a53", "arm,armv8";
 109                         reg = <0x0 0x2>;
 110                         enable-method = "psci";
 111                         next-level-cache = <&l2>;
 112                         clocks = <&scpi_dvfs 0>;
 113                 };
 114
 115                 cpu3: cpu@3 {
 116                         device_type = "cpu";
 117                         compatible = "arm,cortex-a53", "arm,armv8";
 118                         reg = <0x0 0x3>;
 119                         enable-method = "psci";
 120                         next-level-cache = <&l2>;
 121                         clocks = <&scpi_dvfs 0>;
 122                 };
 123
 124                 l2: l2-cache0 {
 125                         compatible = "cache";
 126                 };
 127         };
 128
 129         arm-pmu {
 130                 compatible = "arm,cortex-a53-pmu";
 131                 interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
 132                              <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
 133                              <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
 134                              <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
 135                 interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
 136         };
 137
 138         psci {
 139                 compatible = "arm,psci-0.2";
 140                 method = "smc";
 141         };
 142
 143         timer {
 144                 compatible = "arm,armv8-timer";
 145                 interrupts = <GIC_PPI 13
 146                         (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
 147                              <GIC_PPI 14
 148                         (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
 149                              <GIC_PPI 11
 150                         (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
 151                              <GIC_PPI 10
 152                         (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
 153         };
 154
 155         xtal: xtal-clk {
 156                 compatible = "fixed-clock";
 157                 clock-frequency = <24000000>;
 158                 clock-output-names = "xtal";
 159                 #clock-cells = <0>;
 160         };
 161
 162         firmware {
 163                 sm: secure-monitor {
 164                         compatible = "amlogic,meson-gx-sm", "amlogic,meson-gxbb-sm";
 165                 };
 166         };
 167
 168         efuse: efuse {
 169                 compatible = "amlogic,meson-gx-efuse", "amlogic,meson-gxbb-efuse";
 170                 #address-cells = <1>;
 171                 #size-cells = <1>;
 172
 173                 sn: sn@14 {
 174                         reg = <0x14 0x10>;
 175                 };
 176
 177                 eth_mac: eth_mac@34 {
 178                         reg = <0x34 0x10>;
 179                 };
 180
 181                 bid: bid@46 {
 182                         reg = <0x46 0x30>;
 183                 };
 184         };
 185
 186         scpi {
 187                 compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0";
 188                 mboxes = <&mailbox 1 &mailbox 2>;
 189                 shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
 190
 191                 scpi_clocks: clocks {
 192                         compatible = "arm,scpi-clocks";
 193
 194                         scpi_dvfs: scpi_clocks@0 {
 195                                 compatible = "arm,scpi-dvfs-clocks";
 196                                 #clock-cells = <1>;
 197                                 clock-indices = <0>;
 198                                 clock-output-names = "vcpu";
 199                         };
 200                 };
 201
 202                 scpi_sensors: sensors {
 203                         compatible = "amlogic,meson-gxbb-scpi-sensors", "arm,scpi-sensors";
 204                         #thermal-sensor-cells = <1>;
 205                 };
 206         };
 207
 208         soc {
 209                 compatible = "simple-bus";
 210                 #address-cells = <2>;
 211                 #size-cells = <2>;
 212                 ranges;
 213
 214                 cbus: bus@c1100000 {
 215                         compatible = "simple-bus";
 216                         reg = <0x0 0xc1100000 0x0 0x100000>;
 217                         #address-cells = <2>;
 218                         #size-cells = <2>;
 219                         ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;
 220
 221                         gpio_intc: interrupt-controller@9880 {
 222                                 compatible = "amlogic,meson-gpio-intc";
 223                                 reg = <0x0 0x9880 0x0 0x10>;
 224                                 interrupt-controller;
 225                                 #interrupt-cells = <2>;
 226                                 amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
 227                                 status = "disabled";
 228                         };
 229
 230                         reset: reset-controller@4404 {
 231                                 compatible = "amlogic,meson-gx-reset", "amlogic,meson-gxbb-reset";
 232                                 reg = <0x0 0x04404 0x0 0x9c>;
 233                                 #reset-cells = <1>;
 234                         };
 235
 236                         uart_A: serial@84c0 {
 237                                 compatible = "amlogic,meson-gx-uart";
 238                                 reg = <0x0 0x84c0 0x0 0x14>;
 239                                 interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
 240                                 status = "disabled";
 241                         };
 242
 243                         uart_B: serial@84dc {
 244                                 compatible = "amlogic,meson-gx-uart";
 245                                 reg = <0x0 0x84dc 0x0 0x14>;
 246                                 interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
 247                                 status = "disabled";
 248                         };
 249
 250                         i2c_A: i2c@8500 {
 251                                 compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
 252                                 reg = <0x0 0x08500 0x0 0x20>;
 253                                 interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
 254                                 #address-cells = <1>;
 255                                 #size-cells = <0>;
 256                                 status = "disabled";
 257                         };
 258
 259                         pwm_ab: pwm@8550 {
 260                                 compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
 261                                 reg = <0x0 0x08550 0x0 0x10>;
 262                                 #pwm-cells = <3>;
 263                                 status = "disabled";
 264                         };
 265
 266                         pwm_cd: pwm@8650 {
 267                                 compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
 268                                 reg = <0x0 0x08650 0x0 0x10>;
 269                                 #pwm-cells = <3>;
 270                                 status = "disabled";
 271                         };
 272
 273                         saradc: adc@8680 {
 274                                 compatible = "amlogic,meson-saradc";
 275                                 reg = <0x0 0x8680 0x0 0x34>;
 276                                 #io-channel-cells = <1>;
 277                                 interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
 278                                 status = "disabled";
 279                         };
 280
 281                         pwm_ef: pwm@86c0 {
 282                                 compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
 283                                 reg = <0x0 0x086c0 0x0 0x10>;
 284                                 #pwm-cells = <3>;
 285                                 status = "disabled";
 286                         };
 287
 288                         uart_C: serial@8700 {
 289                                 compatible = "amlogic,meson-gx-uart";
 290                                 reg = <0x0 0x8700 0x0 0x14>;
 291                                 interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
 292                                 status = "disabled";
 293                         };
 294
 295                         i2c_B: i2c@87c0 {
 296                                 compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
 297                                 reg = <0x0 0x087c0 0x0 0x20>;
 298                                 interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
 299                                 #address-cells = <1>;
 300                                 #size-cells = <0>;
 301                                 status = "disabled";
 302                         };
 303
 304                         i2c_C: i2c@87e0 {
 305                                 compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
 306                                 reg = <0x0 0x087e0 0x0 0x20>;
 307                                 interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
 308                                 #address-cells = <1>;
 309                                 #size-cells = <0>;
 310                                 status = "disabled";
 311                         };
 312
 313                         spicc: spi@8d80 {
 314                                 compatible = "amlogic,meson-gx-spicc";
 315                                 reg = <0x0 0x08d80 0x0 0x80>;
 316                                 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 317                                 #address-cells = <1>;
 318                                 #size-cells = <0>;
 319                                 status = "disabled";
 320                         };
 321
 322                         spifc: spi@8c80 {
 323                                 compatible = "amlogic,meson-gx-spifc", "amlogic,meson-gxbb-spifc";
 324                                 reg = <0x0 0x08c80 0x0 0x80>;
 325                                 #address-cells = <1>;
 326                                 #size-cells = <0>;
 327                                 status = "disabled";
 328                         };
 329
 330                         watchdog@98d0 {
 331                                 compatible = "amlogic,meson-gx-wdt", "amlogic,meson-gxbb-wdt";
 332                                 reg = <0x0 0x098d0 0x0 0x10>;
 333                                 clocks = <&xtal>;
 334                         };
 335                 };
 336
 337                 gic: interrupt-controller@c4301000 {
 338                         compatible = "arm,gic-400";
 339                         reg = <0x0 0xc4301000 0 0x1000>,
 340                               <0x0 0xc4302000 0 0x2000>,
 341                               <0x0 0xc4304000 0 0x2000>,
 342                               <0x0 0xc4306000 0 0x2000>;
 343                         interrupt-controller;
 344                         interrupts = <GIC_PPI 9
 345                                 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
 346                         #interrupt-cells = <3>;
 347                         #address-cells = <0>;
 348                 };
 349
 350                 sram: sram@c8000000 {
 351                         compatible = "amlogic,meson-gx-sram", "amlogic,meson-gxbb-sram", "mmio-sram";
 352                         reg = <0x0 0xc8000000 0x0 0x14000>;
 353
 354                         #address-cells = <1>;
 355                         #size-cells = <1>;
 356                         ranges = <0 0x0 0xc8000000 0x14000>;
 357
 358                         cpu_scp_lpri: scp-shmem@0 {
 359                                 compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem";
 360                                 reg = <0x13000 0x400>;
 361                         };
 362
 363                         cpu_scp_hpri: scp-shmem@200 {
 364                                 compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem";
 365                                 reg = <0x13400 0x400>;
 366                         };
 367                 };
 368
 369                 aobus: bus@c8100000 {
 370                         compatible = "simple-bus";
 371                         reg = <0x0 0xc8100000 0x0 0x100000>;
 372                         #address-cells = <2>;
 373                         #size-cells = <2>;
 374                         ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
 375
 376                         sysctrl_AO: sys-ctrl@0 {
 377                                 compatible = "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd";
 378                                 reg =  <0x0 0x0 0x0 0x100>;
 379
 380                                 pwrc_vpu: power-controller-vpu {
 381                                         compatible = "amlogic,meson-gx-pwrc-vpu";
 382                                         #power-domain-cells = <0>;
 383                                         amlogic,hhi-sysctrl = <&sysctrl>;
 384                                 };
 385
 386                                 clkc_AO: clock-controller {
 387                                         compatible = "amlogic,meson-gx-aoclkc";
 388                                         #clock-cells = <1>;
 389                                         #reset-cells = <1>;
 390                                 };
 391                         };
 392
 393                         cec_AO: cec@100 {
 394                                 compatible = "amlogic,meson-gx-ao-cec";
 395                                 reg = <0x0 0x00100 0x0 0x14>;
 396                                 interrupts = <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>;
 397                         };
 398
 399                         sec_AO: ao-secure@140 {
 400                                 compatible = "amlogic,meson-gx-ao-secure", "syscon";
 401                                 reg = <0x0 0x140 0x0 0x140>;
 402                                 amlogic,has-chip-id;
 403                         };
 404
 405                         uart_AO: serial@4c0 {
 406                                 compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
 407                                 reg = <0x0 0x004c0 0x0 0x14>;
 408                                 interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
 409                                 status = "disabled";
 410                         };
 411
 412                         uart_AO_B: serial@4e0 {
 413                                 compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
 414                                 reg = <0x0 0x004e0 0x0 0x14>;
 415                                 interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
 416                                 status = "disabled";
 417                         };
 418
 419                         i2c_AO: i2c@500 {
 420                                 compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
 421                                 reg = <0x0 0x500 0x0 0x20>;
 422                                 interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
 423                                 #address-cells = <1>;
 424                                 #size-cells = <0>;
 425                                 status = "disabled";
 426                         };
 427
 428                         pwm_AO_ab: pwm@550 {
 429                                 compatible = "amlogic,meson-gx-ao-pwm", "amlogic,meson-gxbb-ao-pwm";
 430                                 reg = <0x0 0x00550 0x0 0x10>;
 431                                 #pwm-cells = <3>;
 432                                 status = "disabled";
 433                         };
 434
 435                         ir: ir@580 {
 436                                 compatible = "amlogic,meson-gx-ir", "amlogic,meson-gxbb-ir";
 437                                 reg = <0x0 0x00580 0x0 0x40>;
 438                                 interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
 439                                 status = "disabled";
 440                         };
 441                 };
 442
 443                 periphs: periphs@c8834000 {
 444                         compatible = "simple-bus";
 445                         reg = <0x0 0xc8834000 0x0 0x2000>;
 446                         #address-cells = <2>;
 447                         #size-cells = <2>;
 448                         ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;
 449
 450                         hwrng: rng {
 451                                 compatible = "amlogic,meson-rng";
 452                                 reg = <0x0 0x0 0x0 0x4>;
 453                         };
 454                 };
 455
 456                 hiubus: bus@c883c000 {
 457                         compatible = "simple-bus";
 458                         reg = <0x0 0xc883c000 0x0 0x2000>;
 459                         #address-cells = <2>;
 460                         #size-cells = <2>;
 461                         ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>;
 462
 463                         sysctrl: system-controller@0 {
 464                                 compatible = "amlogic,meson-gx-hhi-sysctrl", "syscon", "simple-mfd";
 465                                 reg = <0 0 0 0x400>;
 466                         };
 467
 468                         mailbox: mailbox@404 {
 469                                 compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu";
 470                                 reg = <0 0x404 0 0x4c>;
 471                                 interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
 472                                              <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>,
 473                                              <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>;
 474                                 #mbox-cells = <1>;
 475                         };
 476                 };
 477
 478                 ethmac: ethernet@c9410000 {
 479                         compatible = "amlogic,meson-gx-dwmac", "amlogic,meson-gxbb-dwmac", "snps,dwmac";
 480                         reg = <0x0 0xc9410000 0x0 0x10000
 481                                0x0 0xc8834540 0x0 0x4>;
 482                         interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>;
 483                         interrupt-names = "macirq";
 484                         status = "disabled";
 485                 };
 486
 487                 apb: apb@d0000000 {
 488                         compatible = "simple-bus";
 489                         reg = <0x0 0xd0000000 0x0 0x200000>;
 490                         #address-cells = <2>;
 491                         #size-cells = <2>;
 492                         ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;
 493
 494                         sd_emmc_a: mmc@70000 {
 495                                 compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
 496                                 reg = <0x0 0x70000 0x0 0x2000>;
 497                                 interrupts = <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>;
 498                                 status = "disabled";
 499                         };
 500
 501                         sd_emmc_b: mmc@72000 {
 502                                 compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
 503                                 reg = <0x0 0x72000 0x0 0x2000>;
 504                                 interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
 505                                 status = "disabled";
 506                         };
 507
 508                         sd_emmc_c: mmc@74000 {
 509                                 compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
 510                                 reg = <0x0 0x74000 0x0 0x2000>;
 511                                 interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>;
 512                                 status = "disabled";
 513                         };
 514                 };
 515
 516                 vpu: vpu@d0100000 {
 517                         compatible = "amlogic,meson-gx-vpu";
 518                         reg = <0x0 0xd0100000 0x0 0x100000>,
 519                               <0x0 0xc883c000 0x0 0x1000>,
 520                               <0x0 0xc8838000 0x0 0x1000>;
 521                         reg-names = "vpu", "hhi", "dmc";
 522                         interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
 523                         #address-cells = <1>;
 524                         #size-cells = <0>;
 525
 526                         /* CVBS VDAC output port */
 527                         cvbs_vdac_port: port@0 {
 528                                 reg = <0>;
 529                         };
 530
 531                         /* HDMI-TX output port */
 532                         hdmi_tx_port: port@1 {
 533                                 reg = <1>;
 534
 535                                 hdmi_tx_out: endpoint {
 536                                         remote-endpoint = <&hdmi_tx_in>;
 537                                 };
 538                         };
 539                 };
 540
 541                 hdmi_tx: hdmi-tx@c883a000 {
 542                         compatible = "amlogic,meson-gx-dw-hdmi";
 543                         reg = <0x0 0xc883a000 0x0 0x1c>;
 544                         interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
 545                         #address-cells = <1>;
 546                         #size-cells = <0>;
 547                         status = "disabled";
 548
 549                         /* VPU VENC Input */
 550                         hdmi_tx_venc_port: port@0 {
 551                                 reg = <0>;
 552
 553                                 hdmi_tx_in: endpoint {
 554                                         remote-endpoint = <&hdmi_tx_out>;
 555                                 };
 556                         };
 557
 558                         /* TMDS Output */
 559                         hdmi_tx_tmds_port: port@1 {
 560                                 reg = <1>;
 561                         };
 562                 };
 563         };
 564 };