arch/arm64/boot/dts/amlogic/meson-gx.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Copyright (c) 2016 Andreas Färber
   4  *
   5  * Copyright (c) 2016 BayLibre, SAS.
   6  * Author: Neil Armstrong <narmstrong@baylibre.com>
   7  *
   8  * Copyright (c) 2016 Endless Computers, Inc.
   9  * Author: Carlo Caione <carlo@endlessm.com>
  10  */
  11
  12 #include <dt-bindings/gpio/gpio.h>
  13 #include <dt-bindings/interrupt-controller/irq.h>
  14 #include <dt-bindings/interrupt-controller/arm-gic.h>
  15
  16 / {
  17         interrupt-parent = <&gic>;
  18         #address-cells = <2>;
  19         #size-cells = <2>;
  20
  21         reserved-memory {
  22                 #address-cells = <2>;
  23                 #size-cells = <2>;
  24                 ranges;
  25
  26                 /* 16 MiB reserved for Hardware ROM Firmware */
  27                 hwrom_reserved: hwrom@0 {
  28                         reg = <0x0 0x0 0x0 0x1000000>;
  29                         no-map;
  30                 };
  31
  32                 /* 2 MiB reserved for ARM Trusted Firmware (BL31) */
  33                 secmon_reserved: secmon@10000000 {
  34                         reg = <0x0 0x10000000 0x0 0x200000>;
  35                         no-map;
  36                 };
  37
  38                 /* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */
  39                 secmon_reserved_alt: secmon@5000000 {
  40                         reg = <0x0 0x05000000 0x0 0x300000>;
  41                         no-map;
  42                 };
  43
  44                 linux,cma {
  45                         compatible = "shared-dma-pool";
  46                         reusable;
  47                         size = <0x0 0x10000000>;
  48                         alignment = <0x0 0x400000>;
  49                         linux,cma-default;
  50                 };
  51         };
  52
  53         chosen {
  54                 #address-cells = <2>;
  55                 #size-cells = <2>;
  56                 ranges;
  57
  58                 simplefb_cvbs: framebuffer-cvbs {
  59                         compatible = "amlogic,simple-framebuffer",
  60                                      "simple-framebuffer";
  61                         amlogic,pipeline = "vpu-cvbs";
  62                         power-domains = <&pwrc_vpu>;
  63                         status = "disabled";
  64                 };
  65
  66                 simplefb_hdmi: framebuffer-hdmi {
  67                         compatible = "amlogic,simple-framebuffer",
  68                                      "simple-framebuffer";
  69                         amlogic,pipeline = "vpu-hdmi";
  70                         power-domains = <&pwrc_vpu>;
  71                         status = "disabled";
  72                 };
  73         };
  74
  75         cpus {
  76                 #address-cells = <0x2>;
  77                 #size-cells = <0x0>;
  78
  79                 cpu0: cpu@0 {
  80                         device_type = "cpu";
  81                         compatible = "arm,cortex-a53";
  82                         reg = <0x0 0x0>;
  83                         enable-method = "psci";
  84                         next-level-cache = <&l2>;
  85                         clocks = <&scpi_dvfs 0>;
  86                 };
  87
  88                 cpu1: cpu@1 {
  89                         device_type = "cpu";
  90                         compatible = "arm,cortex-a53";
  91                         reg = <0x0 0x1>;
  92                         enable-method = "psci";
  93                         next-level-cache = <&l2>;
  94                         clocks = <&scpi_dvfs 0>;
  95                 };
  96
  97                 cpu2: cpu@2 {
  98                         device_type = "cpu";
  99                         compatible = "arm,cortex-a53";
 100                         reg = <0x0 0x2>;
 101                         enable-method = "psci";
 102                         next-level-cache = <&l2>;
 103                         clocks = <&scpi_dvfs 0>;
 104                 };
 105
 106                 cpu3: cpu@3 {
 107                         device_type = "cpu";
 108                         compatible = "arm,cortex-a53";
 109                         reg = <0x0 0x3>;
 110                         enable-method = "psci";
 111                         next-level-cache = <&l2>;
 112                         clocks = <&scpi_dvfs 0>;
 113                 };
 114
 115                 l2: l2-cache0 {
 116                         compatible = "cache";
 117                 };
 118         };
 119
 120         arm-pmu {
 121                 compatible = "arm,cortex-a53-pmu";
 122                 interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
 123                              <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
 124                              <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
 125                              <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
 126                 interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
 127         };
 128
 129         psci {
 130                 compatible = "arm,psci-0.2";
 131                 method = "smc";
 132         };
 133
 134         timer {
 135                 compatible = "arm,armv8-timer";
 136                 interrupts = <GIC_PPI 13
 137                         (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
 138                              <GIC_PPI 14
 139                         (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
 140                              <GIC_PPI 11
 141                         (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
 142                              <GIC_PPI 10
 143                         (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
 144         };
 145
 146         xtal: xtal-clk {
 147                 compatible = "fixed-clock";
 148                 clock-frequency = <24000000>;
 149                 clock-output-names = "xtal";
 150                 #clock-cells = <0>;
 151         };
 152
 153         firmware {
 154                 sm: secure-monitor {
 155                         compatible = "amlogic,meson-gx-sm", "amlogic,meson-gxbb-sm";
 156                 };
 157         };
 158
 159         efuse: efuse {
 160                 compatible = "amlogic,meson-gx-efuse", "amlogic,meson-gxbb-efuse";
 161                 #address-cells = <1>;
 162                 #size-cells = <1>;
 163                 read-only;
 164
 165                 sn: sn@14 {
 166                         reg = <0x14 0x10>;
 167                 };
 168
 169                 eth_mac: eth_mac@34 {
 170                         reg = <0x34 0x10>;
 171                 };
 172
 173                 bid: bid@46 {
 174                         reg = <0x46 0x30>;
 175                 };
 176         };
 177
 178         scpi {
 179                 compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0";
 180                 mboxes = <&mailbox 1 &mailbox 2>;
 181                 shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
 182
 183                 scpi_clocks: clocks {
 184                         compatible = "arm,scpi-clocks";
 185
 186                         scpi_dvfs: scpi_clocks@0 {
 187                                 compatible = "arm,scpi-dvfs-clocks";
 188                                 #clock-cells = <1>;
 189                                 clock-indices = <0>;
 190                                 clock-output-names = "vcpu";
 191                         };
 192                 };
 193
 194                 scpi_sensors: sensors {
 195                         compatible = "amlogic,meson-gxbb-scpi-sensors", "arm,scpi-sensors";
 196                         #thermal-sensor-cells = <1>;
 197                 };
 198         };
 199
 200         soc {
 201                 compatible = "simple-bus";
 202                 #address-cells = <2>;
 203                 #size-cells = <2>;
 204                 ranges;
 205
 206                 cbus: bus@c1100000 {
 207                         compatible = "simple-bus";
 208                         reg = <0x0 0xc1100000 0x0 0x100000>;
 209                         #address-cells = <2>;
 210                         #size-cells = <2>;
 211                         ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;
 212
 213                         gpio_intc: interrupt-controller@9880 {
 214                                 compatible = "amlogic,meson-gpio-intc";
 215                                 reg = <0x0 0x9880 0x0 0x10>;
 216                                 interrupt-controller;
 217                                 #interrupt-cells = <2>;
 218                                 amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
 219                                 status = "disabled";
 220                         };
 221
 222                         reset: reset-controller@4404 {
 223                                 compatible = "amlogic,meson-gxbb-reset";
 224                                 reg = <0x0 0x04404 0x0 0x9c>;
 225                                 #reset-cells = <1>;
 226                         };
 227
 228                         uart_A: serial@84c0 {
 229                                 compatible = "amlogic,meson-gx-uart";
 230                                 reg = <0x0 0x84c0 0x0 0x18>;
 231                                 interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
 232                                 status = "disabled";
 233                         };
 234
 235                         uart_B: serial@84dc {
 236                                 compatible = "amlogic,meson-gx-uart";
 237                                 reg = <0x0 0x84dc 0x0 0x18>;
 238                                 interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
 239                                 status = "disabled";
 240                         };
 241
 242                         i2c_A: i2c@8500 {
 243                                 compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
 244                                 reg = <0x0 0x08500 0x0 0x20>;
 245                                 interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
 246                                 #address-cells = <1>;
 247                                 #size-cells = <0>;
 248                                 status = "disabled";
 249                         };
 250
 251                         pwm_ab: pwm@8550 {
 252                                 compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
 253                                 reg = <0x0 0x08550 0x0 0x10>;
 254                                 #pwm-cells = <3>;
 255                                 status = "disabled";
 256                         };
 257
 258                         pwm_cd: pwm@8650 {
 259                                 compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
 260                                 reg = <0x0 0x08650 0x0 0x10>;
 261                                 #pwm-cells = <3>;
 262                                 status = "disabled";
 263                         };
 264
 265                         saradc: adc@8680 {
 266                                 compatible = "amlogic,meson-saradc";
 267                                 reg = <0x0 0x8680 0x0 0x34>;
 268                                 #io-channel-cells = <1>;
 269                                 interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
 270                                 status = "disabled";
 271                         };
 272
 273                         pwm_ef: pwm@86c0 {
 274                                 compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
 275                                 reg = <0x0 0x086c0 0x0 0x10>;
 276                                 #pwm-cells = <3>;
 277                                 status = "disabled";
 278                         };
 279
 280                         uart_C: serial@8700 {
 281                                 compatible = "amlogic,meson-gx-uart";
 282                                 reg = <0x0 0x8700 0x0 0x18>;
 283                                 interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
 284                                 status = "disabled";
 285                         };
 286
 287                         clock-measure@8758 {
 288                                 compatible = "amlogic,meson-gx-clk-measure";
 289                                 reg = <0x0 0x8758 0x0 0x10>;
 290                         };
 291
 292                         i2c_B: i2c@87c0 {
 293                                 compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
 294                                 reg = <0x0 0x087c0 0x0 0x20>;
 295                                 interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
 296                                 #address-cells = <1>;
 297                                 #size-cells = <0>;
 298                                 status = "disabled";
 299                         };
 300
 301                         i2c_C: i2c@87e0 {
 302                                 compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
 303                                 reg = <0x0 0x087e0 0x0 0x20>;
 304                                 interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
 305                                 #address-cells = <1>;
 306                                 #size-cells = <0>;
 307                                 status = "disabled";
 308                         };
 309
 310                         spicc: spi@8d80 {
 311                                 compatible = "amlogic,meson-gx-spicc";
 312                                 reg = <0x0 0x08d80 0x0 0x80>;
 313                                 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 314                                 #address-cells = <1>;
 315                                 #size-cells = <0>;
 316                                 status = "disabled";
 317                         };
 318
 319                         spifc: spi@8c80 {
 320                                 compatible = "amlogic,meson-gxbb-spifc";
 321                                 reg = <0x0 0x08c80 0x0 0x80>;
 322                                 #address-cells = <1>;
 323                                 #size-cells = <0>;
 324                                 status = "disabled";
 325                         };
 326
 327                         watchdog@98d0 {
 328                                 compatible = "amlogic,meson-gxbb-wdt";
 329                                 reg = <0x0 0x098d0 0x0 0x10>;
 330                                 clocks = <&xtal>;
 331                         };
 332                 };
 333
 334                 gic: interrupt-controller@c4301000 {
 335                         compatible = "arm,gic-400";
 336                         reg = <0x0 0xc4301000 0 0x1000>,
 337                               <0x0 0xc4302000 0 0x2000>,
 338                               <0x0 0xc4304000 0 0x2000>,
 339                               <0x0 0xc4306000 0 0x2000>;
 340                         interrupt-controller;
 341                         interrupts = <GIC_PPI 9
 342                                 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
 343                         #interrupt-cells = <3>;
 344                         #address-cells = <0>;
 345                 };
 346
 347                 sram: sram@c8000000 {
 348                         compatible = "amlogic,meson-gx-sram", "amlogic,meson-gxbb-sram", "mmio-sram";
 349                         reg = <0x0 0xc8000000 0x0 0x14000>;
 350
 351                         #address-cells = <1>;
 352                         #size-cells = <1>;
 353                         ranges = <0 0x0 0xc8000000 0x14000>;
 354
 355                         cpu_scp_lpri: scp-shmem@0 {
 356                                 compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem";
 357                                 reg = <0x13000 0x400>;
 358                         };
 359
 360                         cpu_scp_hpri: scp-shmem@200 {
 361                                 compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem";
 362                                 reg = <0x13400 0x400>;
 363                         };
 364                 };
 365
 366                 aobus: bus@c8100000 {
 367                         compatible = "simple-bus";
 368                         reg = <0x0 0xc8100000 0x0 0x100000>;
 369                         #address-cells = <2>;
 370                         #size-cells = <2>;
 371                         ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
 372
 373                         sysctrl_AO: sys-ctrl@0 {
 374                                 compatible = "amlogic,meson-gx-ao-sysctrl", "simple-mfd", "syscon";
 375                                 reg =  <0x0 0x0 0x0 0x100>;
 376
 377                                 pwrc_vpu: power-controller-vpu {
 378                                         compatible = "amlogic,meson-gx-pwrc-vpu";
 379                                         #power-domain-cells = <0>;
 380                                         amlogic,hhi-sysctrl = <&sysctrl>;
 381                                 };
 382
 383                                 clkc_AO: clock-controller {
 384                                         compatible = "amlogic,meson-gx-aoclkc";
 385                                         #clock-cells = <1>;
 386                                         #reset-cells = <1>;
 387                                 };
 388                         };
 389
 390                         cec_AO: cec@100 {
 391                                 compatible = "amlogic,meson-gx-ao-cec";
 392                                 reg = <0x0 0x00100 0x0 0x14>;
 393                                 interrupts = <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>;
 394                         };
 395
 396                         sec_AO: ao-secure@140 {
 397                                 compatible = "amlogic,meson-gx-ao-secure", "syscon";
 398                                 reg = <0x0 0x140 0x0 0x140>;
 399                                 amlogic,has-chip-id;
 400                         };
 401
 402                         uart_AO: serial@4c0 {
 403                                 compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
 404                                 reg = <0x0 0x004c0 0x0 0x18>;
 405                                 interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
 406                                 status = "disabled";
 407                         };
 408
 409                         uart_AO_B: serial@4e0 {
 410                                 compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
 411                                 reg = <0x0 0x004e0 0x0 0x18>;
 412                                 interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
 413                                 status = "disabled";
 414                         };
 415
 416                         i2c_AO: i2c@500 {
 417                                 compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
 418                                 reg = <0x0 0x500 0x0 0x20>;
 419                                 interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
 420                                 #address-cells = <1>;
 421                                 #size-cells = <0>;
 422                                 status = "disabled";
 423                         };
 424
 425                         pwm_AO_ab: pwm@550 {
 426                                 compatible = "amlogic,meson-gx-ao-pwm", "amlogic,meson-gxbb-ao-pwm";
 427                                 reg = <0x0 0x00550 0x0 0x10>;
 428                                 #pwm-cells = <3>;
 429                                 status = "disabled";
 430                         };
 431
 432                         ir: ir@580 {
 433                                 compatible = "amlogic,meson-gx-ir", "amlogic,meson-gxbb-ir";
 434                                 reg = <0x0 0x00580 0x0 0x40>;
 435                                 interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
 436                                 status = "disabled";
 437                         };
 438                 };
 439
 440                 vdec: video-codec@c8820000 {
 441                         compatible = "amlogic,gx-vdec";
 442                         reg = <0x0 0xc8820000 0x0 0x10000>,
 443                               <0x0 0xc110a580 0x0 0xe4>;
 444                         reg-names = "dos", "esparser";
 445
 446                         interrupts = <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>,
 447                                      <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
 448                         interrupt-names = "vdec", "esparser";
 449
 450                         amlogic,ao-sysctrl = <&sysctrl_AO>;
 451                         amlogic,canvas = <&canvas>;
 452                 };
 453
 454                 periphs: bus@c8834000 {
 455                         compatible = "simple-bus";
 456                         reg = <0x0 0xc8834000 0x0 0x2000>;
 457                         #address-cells = <2>;
 458                         #size-cells = <2>;
 459                         ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;
 460
 461                         hwrng: rng {
 462                                 compatible = "amlogic,meson-rng";
 463                                 reg = <0x0 0x0 0x0 0x4>;
 464                         };
 465                 };
 466
 467                 dmcbus: bus@c8838000 {
 468                         compatible = "simple-bus";
 469                         reg = <0x0 0xc8838000 0x0 0x400>;
 470                         #address-cells = <2>;
 471                         #size-cells = <2>;
 472                         ranges = <0x0 0x0 0x0 0xc8838000 0x0 0x400>;
 473
 474                         canvas: video-lut@48 {
 475                                 compatible = "amlogic,canvas";
 476                                 reg = <0x0 0x48 0x0 0x14>;
 477                         };
 478                 };
 479
 480                 hiubus: bus@c883c000 {
 481                         compatible = "simple-bus";
 482                         reg = <0x0 0xc883c000 0x0 0x2000>;
 483                         #address-cells = <2>;
 484                         #size-cells = <2>;
 485                         ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>;
 486
 487                         sysctrl: system-controller@0 {
 488                                 compatible = "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon";
 489                                 reg = <0 0 0 0x400>;
 490                         };
 491
 492                         mailbox: mailbox@404 {
 493                                 compatible = "amlogic,meson-gxbb-mhu";
 494                                 reg = <0 0x404 0 0x4c>;
 495                                 interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
 496                                              <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>,
 497                                              <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>;
 498                                 #mbox-cells = <1>;
 499                         };
 500                 };
 501
 502                 ethmac: ethernet@c9410000 {
 503                         compatible = "amlogic,meson-gxbb-dwmac",
 504                                      "snps,dwmac-3.70a",
 505                                      "snps,dwmac";
 506                         reg = <0x0 0xc9410000 0x0 0x10000>,
 507                               <0x0 0xc8834540 0x0 0x4>;
 508                         interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 509                         interrupt-names = "macirq";
 510                         rx-fifo-depth = <4096>;
 511                         tx-fifo-depth = <2048>;
 512                         status = "disabled";
 513                 };
 514
 515                 apb: apb@d0000000 {
 516                         compatible = "simple-bus";
 517                         reg = <0x0 0xd0000000 0x0 0x200000>;
 518                         #address-cells = <2>;
 519                         #size-cells = <2>;
 520                         ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;
 521
 522                         sd_emmc_a: mmc@70000 {
 523                                 compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
 524                                 reg = <0x0 0x70000 0x0 0x800>;
 525                                 interrupts = <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>;
 526                                 status = "disabled";
 527                         };
 528
 529                         sd_emmc_b: mmc@72000 {
 530                                 compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
 531                                 reg = <0x0 0x72000 0x0 0x800>;
 532                                 interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
 533                                 status = "disabled";
 534                         };
 535
 536                         sd_emmc_c: mmc@74000 {
 537                                 compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
 538                                 reg = <0x0 0x74000 0x0 0x800>;
 539                                 interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>;
 540                                 status = "disabled";
 541                         };
 542                 };
 543
 544                 vpu: vpu@d0100000 {
 545                         compatible = "amlogic,meson-gx-vpu";
 546                         reg = <0x0 0xd0100000 0x0 0x100000>,
 547                               <0x0 0xc883c000 0x0 0x1000>;
 548                         reg-names = "vpu", "hhi";
 549                         interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
 550                         #address-cells = <1>;
 551                         #size-cells = <0>;
 552                         amlogic,canvas = <&canvas>;
 553
 554                         /* CVBS VDAC output port */
 555                         cvbs_vdac_port: port@0 {
 556                                 reg = <0>;
 557                         };
 558
 559                         /* HDMI-TX output port */
 560                         hdmi_tx_port: port@1 {
 561                                 reg = <1>;
 562
 563                                 hdmi_tx_out: endpoint {
 564                                         remote-endpoint = <&hdmi_tx_in>;
 565                                 };
 566                         };
 567                 };
 568
 569                 hdmi_tx: hdmi-tx@c883a000 {
 570                         compatible = "amlogic,meson-gx-dw-hdmi";
 571                         reg = <0x0 0xc883a000 0x0 0x1c>;
 572                         interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
 573                         #address-cells = <1>;
 574                         #size-cells = <0>;
 575                         status = "disabled";
 576
 577                         /* VPU VENC Input */
 578                         hdmi_tx_venc_port: port@0 {
 579                                 reg = <0>;
 580
 581                                 hdmi_tx_in: endpoint {
 582                                         remote-endpoint = <&hdmi_tx_out>;
 583                                 };
 584                         };
 585
 586                         /* TMDS Output */
 587                         hdmi_tx_tmds_port: port@1 {
 588                                 reg = <1>;
 589                         };
 590                 };
 591         };
 592 };