Merge branch 'core/iommu' into core/urgent
[sfrench/cifs-2.6.git] / arch / arm / mm / proc-v6.S
1 /*
2  *  linux/arch/arm/mm/proc-v6.S
3  *
4  *  Copyright (C) 2001 Deep Blue Solutions Ltd.
5  *  Modified by Catalin Marinas for noMMU support
6  *
7  * This program is free software; you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License version 2 as
9  * published by the Free Software Foundation.
10  *
11  *  This is the "shell" of the ARMv6 processor support.
12  */
13 #include <linux/linkage.h>
14 #include <asm/assembler.h>
15 #include <asm/asm-offsets.h>
16 #include <asm/hwcap.h>
17 #include <asm/pgtable-hwdef.h>
18 #include <asm/pgtable.h>
19
20 #include "proc-macros.S"
21
22 #define D_CACHE_LINE_SIZE       32
23
24 #define TTB_C           (1 << 0)
25 #define TTB_S           (1 << 1)
26 #define TTB_IMP         (1 << 2)
27 #define TTB_RGN_NC      (0 << 3)
28 #define TTB_RGN_WBWA    (1 << 3)
29 #define TTB_RGN_WT      (2 << 3)
30 #define TTB_RGN_WB      (3 << 3)
31
32 #ifndef CONFIG_SMP
33 #define TTB_FLAGS       TTB_RGN_WBWA
34 #else
35 #define TTB_FLAGS       TTB_RGN_WBWA|TTB_S
36 #endif
37
38 ENTRY(cpu_v6_proc_init)
39         mov     pc, lr
40
41 ENTRY(cpu_v6_proc_fin)
42         stmfd   sp!, {lr}
43         cpsid   if                              @ disable interrupts
44         bl      v6_flush_kern_cache_all
45         mrc     p15, 0, r0, c1, c0, 0           @ ctrl register
46         bic     r0, r0, #0x1000                 @ ...i............
47         bic     r0, r0, #0x0006                 @ .............ca.
48         mcr     p15, 0, r0, c1, c0, 0           @ disable caches
49         ldmfd   sp!, {pc}
50
51 /*
52  *      cpu_v6_reset(loc)
53  *
54  *      Perform a soft reset of the system.  Put the CPU into the
55  *      same state as it would be if it had been reset, and branch
56  *      to what would be the reset vector.
57  *
58  *      - loc   - location to jump to for soft reset
59  *
60  *      It is assumed that:
61  */
62         .align  5
63 ENTRY(cpu_v6_reset)
64         mov     pc, r0
65
66 /*
67  *      cpu_v6_do_idle()
68  *
69  *      Idle the processor (eg, wait for interrupt).
70  *
71  *      IRQs are already disabled.
72  */
73 ENTRY(cpu_v6_do_idle)
74         mov     r1, #0
75         mcr     p15, 0, r1, c7, c10, 4          @ DWB - WFI may enter a low-power mode
76         mcr     p15, 0, r1, c7, c0, 4           @ wait for interrupt
77         mov     pc, lr
78
79 ENTRY(cpu_v6_dcache_clean_area)
80 #ifndef TLB_CAN_READ_FROM_L1_CACHE
81 1:      mcr     p15, 0, r0, c7, c10, 1          @ clean D entry
82         add     r0, r0, #D_CACHE_LINE_SIZE
83         subs    r1, r1, #D_CACHE_LINE_SIZE
84         bhi     1b
85 #endif
86         mov     pc, lr
87
88 /*
89  *      cpu_arm926_switch_mm(pgd_phys, tsk)
90  *
91  *      Set the translation table base pointer to be pgd_phys
92  *
93  *      - pgd_phys - physical address of new TTB
94  *
95  *      It is assumed that:
96  *      - we are not using split page tables
97  */
98 ENTRY(cpu_v6_switch_mm)
99 #ifdef CONFIG_MMU
100         mov     r2, #0
101         ldr     r1, [r1, #MM_CONTEXT_ID]        @ get mm->context.id
102         orr     r0, r0, #TTB_FLAGS
103         mcr     p15, 0, r2, c7, c5, 6           @ flush BTAC/BTB
104         mcr     p15, 0, r2, c7, c10, 4          @ drain write buffer
105         mcr     p15, 0, r0, c2, c0, 0           @ set TTB 0
106         mcr     p15, 0, r1, c13, c0, 1          @ set context ID
107 #endif
108         mov     pc, lr
109
110 /*
111  *      cpu_v6_set_pte_ext(ptep, pte, ext)
112  *
113  *      Set a level 2 translation table entry.
114  *
115  *      - ptep  - pointer to level 2 translation table entry
116  *                (hardware version is stored at -1024 bytes)
117  *      - pte   - PTE value to store
118  *      - ext   - value for extended PTE bits
119  */
120         armv6_mt_table cpu_v6
121
122 ENTRY(cpu_v6_set_pte_ext)
123 #ifdef CONFIG_MMU
124         armv6_set_pte_ext cpu_v6
125 #endif
126         mov     pc, lr
127
128
129
130
131 cpu_v6_name:
132         .asciz  "ARMv6-compatible processor"
133         .align
134
135         .section ".text.init", #alloc, #execinstr
136
137 /*
138  *      __v6_setup
139  *
140  *      Initialise TLB, Caches, and MMU state ready to switch the MMU
141  *      on.  Return in r0 the new CP15 C1 control register setting.
142  *
143  *      We automatically detect if we have a Harvard cache, and use the
144  *      Harvard cache control instructions insead of the unified cache
145  *      control instructions.
146  *
147  *      This should be able to cover all ARMv6 cores.
148  *
149  *      It is assumed that:
150  *      - cache type register is implemented
151  */
152 __v6_setup:
153 #ifdef CONFIG_SMP
154         mrc     p15, 0, r0, c1, c0, 1           @ Enable SMP/nAMP mode
155         orr     r0, r0, #0x20
156         mcr     p15, 0, r0, c1, c0, 1
157 #endif
158
159         mov     r0, #0
160         mcr     p15, 0, r0, c7, c14, 0          @ clean+invalidate D cache
161         mcr     p15, 0, r0, c7, c5, 0           @ invalidate I cache
162         mcr     p15, 0, r0, c7, c15, 0          @ clean+invalidate cache
163         mcr     p15, 0, r0, c7, c10, 4          @ drain write buffer
164 #ifdef CONFIG_MMU
165         mcr     p15, 0, r0, c8, c7, 0           @ invalidate I + D TLBs
166         mcr     p15, 0, r0, c2, c0, 2           @ TTB control register
167         orr     r4, r4, #TTB_FLAGS
168         mcr     p15, 0, r4, c2, c0, 1           @ load TTB1
169 #endif /* CONFIG_MMU */
170         adr     r5, v6_crval
171         ldmia   r5, {r5, r6}
172         mrc     p15, 0, r0, c1, c0, 0           @ read control register
173         bic     r0, r0, r5                      @ clear bits them
174         orr     r0, r0, r6                      @ set them
175         mov     pc, lr                          @ return to head.S:__ret
176
177         /*
178          *         V X F   I D LR
179          * .... ...E PUI. .T.T 4RVI ZFRS BLDP WCAM
180          * rrrr rrrx xxx0 0101 xxxx xxxx x111 xxxx < forced
181          *         0 110       0011 1.00 .111 1101 < we want
182          */
183         .type   v6_crval, #object
184 v6_crval:
185         crval   clear=0x01e0fb7f, mmuset=0x00c0387d, ucset=0x00c0187c
186
187         .type   v6_processor_functions, #object
188 ENTRY(v6_processor_functions)
189         .word   v6_early_abort
190         .word   pabort_noifar
191         .word   cpu_v6_proc_init
192         .word   cpu_v6_proc_fin
193         .word   cpu_v6_reset
194         .word   cpu_v6_do_idle
195         .word   cpu_v6_dcache_clean_area
196         .word   cpu_v6_switch_mm
197         .word   cpu_v6_set_pte_ext
198         .size   v6_processor_functions, . - v6_processor_functions
199
200         .type   cpu_arch_name, #object
201 cpu_arch_name:
202         .asciz  "armv6"
203         .size   cpu_arch_name, . - cpu_arch_name
204
205         .type   cpu_elf_name, #object
206 cpu_elf_name:
207         .asciz  "v6"
208         .size   cpu_elf_name, . - cpu_elf_name
209         .align
210
211         .section ".proc.info.init", #alloc, #execinstr
212
213         /*
214          * Match any ARMv6 processor core.
215          */
216         .type   __v6_proc_info, #object
217 __v6_proc_info:
218         .long   0x0007b000
219         .long   0x0007f000
220         .long   PMD_TYPE_SECT | \
221                 PMD_SECT_BUFFERABLE | \
222                 PMD_SECT_CACHEABLE | \
223                 PMD_SECT_AP_WRITE | \
224                 PMD_SECT_AP_READ
225         .long   PMD_TYPE_SECT | \
226                 PMD_SECT_XN | \
227                 PMD_SECT_AP_WRITE | \
228                 PMD_SECT_AP_READ
229         b       __v6_setup
230         .long   cpu_arch_name
231         .long   cpu_elf_name
232         .long   HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_JAVA
233         .long   cpu_v6_name
234         .long   v6_processor_functions
235         .long   v6wbi_tlb_fns
236         .long   v6_user_fns
237         .long   v6_cache_fns
238         .size   __v6_proc_info, . - __v6_proc_info