arch/arm/mach-s3c64xx/pm.c

   1 /* linux/arch/arm/plat-s3c64xx/pm.c
   2  *
   3  * Copyright 2008 Openmoko, Inc.
   4  * Copyright 2008 Simtec Electronics
   5  *      Ben Dooks <ben@simtec.co.uk>
   6  *      http://armlinux.simtec.co.uk/
   7  *
   8  * S3C64XX CPU PM support.
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License version 2 as
  12  * published by the Free Software Foundation.
  13 */
  14
  15 #include <linux/init.h>
  16 #include <linux/suspend.h>
  17 #include <linux/serial_core.h>
  18 #include <linux/io.h>
  19
  20 #include <mach/map.h>
  21 #include <mach/irqs.h>
  22
  23 #include <plat/pm.h>
  24 #include <plat/wakeup-mask.h>
  25
  26 #include <mach/regs-sys.h>
  27 #include <mach/regs-gpio.h>
  28 #include <mach/regs-clock.h>
  29 #include <mach/regs-syscon-power.h>
  30 #include <mach/regs-gpio-memport.h>
  31
  32 #ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
  33 #include <mach/gpio-bank-n.h>
  34
  35 void s3c_pm_debug_smdkled(u32 set, u32 clear)
  36 {
  37         unsigned long flags;
  38         u32 reg;
  39
  40         local_irq_save(flags);
  41         reg = __raw_readl(S3C64XX_GPNCON);
  42         reg &= ~(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) |
  43                  S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15));
  44         reg |= S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) |
  45                S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15);
  46         __raw_writel(reg, S3C64XX_GPNCON);
  47
  48         reg = __raw_readl(S3C64XX_GPNDAT);
  49         reg &= ~(clear << 12);
  50         reg |= set << 12;
  51         __raw_writel(reg, S3C64XX_GPNDAT);
  52
  53         local_irq_restore(flags);
  54 }
  55 #endif
  56
  57 static struct sleep_save core_save[] = {
  58         SAVE_ITEM(S3C_APLL_LOCK),
  59         SAVE_ITEM(S3C_MPLL_LOCK),
  60         SAVE_ITEM(S3C_EPLL_LOCK),
  61         SAVE_ITEM(S3C_CLK_SRC),
  62         SAVE_ITEM(S3C_CLK_DIV0),
  63         SAVE_ITEM(S3C_CLK_DIV1),
  64         SAVE_ITEM(S3C_CLK_DIV2),
  65         SAVE_ITEM(S3C_CLK_OUT),
  66         SAVE_ITEM(S3C_HCLK_GATE),
  67         SAVE_ITEM(S3C_PCLK_GATE),
  68         SAVE_ITEM(S3C_SCLK_GATE),
  69         SAVE_ITEM(S3C_MEM0_GATE),
  70
  71         SAVE_ITEM(S3C_EPLL_CON1),
  72         SAVE_ITEM(S3C_EPLL_CON0),
  73
  74         SAVE_ITEM(S3C64XX_MEM0DRVCON),
  75         SAVE_ITEM(S3C64XX_MEM1DRVCON),
  76
  77 #ifndef CONFIG_CPU_FREQ
  78         SAVE_ITEM(S3C_APLL_CON),
  79         SAVE_ITEM(S3C_MPLL_CON),
  80 #endif
  81 };
  82
  83 static struct sleep_save misc_save[] = {
  84         SAVE_ITEM(S3C64XX_AHB_CON0),
  85         SAVE_ITEM(S3C64XX_AHB_CON1),
  86         SAVE_ITEM(S3C64XX_AHB_CON2),
  87
  88         SAVE_ITEM(S3C64XX_SPCON),
  89
  90         SAVE_ITEM(S3C64XX_MEM0CONSTOP),
  91         SAVE_ITEM(S3C64XX_MEM1CONSTOP),
  92         SAVE_ITEM(S3C64XX_MEM0CONSLP0),
  93         SAVE_ITEM(S3C64XX_MEM0CONSLP1),
  94         SAVE_ITEM(S3C64XX_MEM1CONSLP),
  95 };
  96
  97 void s3c_pm_configure_extint(void)
  98 {
  99         __raw_writel(s3c_irqwake_eintmask, S3C64XX_EINT_MASK);
 100 }
 101
 102 void s3c_pm_restore_core(void)
 103 {
 104         __raw_writel(0, S3C64XX_EINT_MASK);
 105
 106         s3c_pm_debug_smdkled(1 << 2, 0);
 107
 108         s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
 109         s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
 110 }
 111
 112 void s3c_pm_save_core(void)
 113 {
 114         s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save));
 115         s3c_pm_do_save(core_save, ARRAY_SIZE(core_save));
 116 }
 117
 118 /* since both s3c6400 and s3c6410 share the same sleep pm calls, we
 119  * put the per-cpu code in here until any new cpu comes along and changes
 120  * this.
 121  */
 122
 123 static void s3c64xx_cpu_suspend(void)
 124 {
 125         unsigned long tmp;
 126
 127         /* set our standby method to sleep */
 128
 129         tmp = __raw_readl(S3C64XX_PWR_CFG);
 130         tmp &= ~S3C64XX_PWRCFG_CFG_WFI_MASK;
 131         tmp |= S3C64XX_PWRCFG_CFG_WFI_SLEEP;
 132         __raw_writel(tmp, S3C64XX_PWR_CFG);
 133
 134         /* clear any old wakeup */
 135
 136         __raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT),
 137                      S3C64XX_WAKEUP_STAT);
 138
 139         /* set the LED state to 0110 over sleep */
 140         s3c_pm_debug_smdkled(3 << 1, 0xf);
 141
 142         /* issue the standby signal into the pm unit. Note, we
 143          * issue a write-buffer drain just in case */
 144
 145         tmp = 0;
 146
 147         asm("b 1f\n\t"
 148             ".align 5\n\t"
 149             "1:\n\t"
 150             "mcr p15, 0, %0, c7, c10, 5\n\t"
 151             "mcr p15, 0, %0, c7, c10, 4\n\t"
 152             "mcr p15, 0, %0, c7, c0, 4" :: "r" (tmp));
 153
 154         /* we should never get past here */
 155
 156         panic("sleep resumed to originator?");
 157 }
 158
 159 /* mapping of interrupts to parts of the wakeup mask */
 160 static struct samsung_wakeup_mask wake_irqs[] = {
 161         { .irq = IRQ_RTC_ALARM, .bit = S3C64XX_PWRCFG_RTC_ALARM_DISABLE, },
 162         { .irq = IRQ_RTC_TIC,   .bit = S3C64XX_PWRCFG_RTC_TICK_DISABLE, },
 163         { .irq = IRQ_PENDN,     .bit = S3C64XX_PWRCFG_TS_DISABLE, },
 164         { .irq = IRQ_HSMMC0,    .bit = S3C64XX_PWRCFG_MMC0_DISABLE, },
 165         { .irq = IRQ_HSMMC1,    .bit = S3C64XX_PWRCFG_MMC1_DISABLE, },
 166         { .irq = IRQ_HSMMC2,    .bit = S3C64XX_PWRCFG_MMC2_DISABLE, },
 167         { .irq = NO_WAKEUP_IRQ, .bit = S3C64XX_PWRCFG_BATF_DISABLE},
 168         { .irq = NO_WAKEUP_IRQ, .bit = S3C64XX_PWRCFG_MSM_DISABLE },
 169         { .irq = NO_WAKEUP_IRQ, .bit = S3C64XX_PWRCFG_HSI_DISABLE },
 170         { .irq = NO_WAKEUP_IRQ, .bit = S3C64XX_PWRCFG_MSM_DISABLE },
 171 };
 172
 173 static void s3c64xx_pm_prepare(void)
 174 {
 175         samsung_sync_wakemask(S3C64XX_PWR_CFG,
 176                               wake_irqs, ARRAY_SIZE(wake_irqs));
 177
 178         /* store address of resume. */
 179         __raw_writel(virt_to_phys(s3c_cpu_resume), S3C64XX_INFORM0);
 180
 181         /* ensure previous wakeup state is cleared before sleeping */
 182         __raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT), S3C64XX_WAKEUP_STAT);
 183 }
 184
 185 static int s3c64xx_pm_init(void)
 186 {
 187         pm_cpu_prep = s3c64xx_pm_prepare;
 188         pm_cpu_sleep = s3c64xx_cpu_suspend;
 189         pm_uart_udivslot = 1;
 190         return 0;
 191 }
 192
 193 arch_initcall(s3c64xx_pm_init);