arch/arm/mach-s3c24xx/mach-osiris.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 //
   3 // Copyright (c) 2005-2008 Simtec Electronics
   4 //      http://armlinux.simtec.co.uk/
   5 //      Ben Dooks <ben@simtec.co.uk>
   6
   7 #include <linux/kernel.h>
   8 #include <linux/types.h>
   9 #include <linux/interrupt.h>
  10 #include <linux/list.h>
  11 #include <linux/timer.h>
  12 #include <linux/init.h>
  13 #include <linux/gpio.h>
  14 #include <linux/device.h>
  15 #include <linux/syscore_ops.h>
  16 #include <linux/serial_core.h>
  17 #include <linux/serial_s3c.h>
  18 #include <linux/clk.h>
  19 #include <linux/i2c.h>
  20 #include <linux/io.h>
  21 #include <linux/platform_device.h>
  22
  23 #include <linux/mfd/tps65010.h>
  24
  25 #include <asm/mach-types.h>
  26 #include <asm/mach/arch.h>
  27 #include <asm/mach/map.h>
  28 #include <asm/mach/irq.h>
  29 #include <asm/irq.h>
  30
  31 #include <linux/platform_data/mtd-nand-s3c2410.h>
  32 #include <linux/platform_data/i2c-s3c2410.h>
  33
  34 #include <linux/mtd/mtd.h>
  35 #include <linux/mtd/rawnand.h>
  36 #include <linux/mtd/nand_ecc.h>
  37 #include <linux/mtd/partitions.h>
  38
  39 #include <plat/cpu.h>
  40 #include <plat/cpu-freq.h>
  41 #include <plat/devs.h>
  42 #include <plat/gpio-cfg.h>
  43 #include <plat/samsung-time.h>
  44
  45 #include <mach/hardware.h>
  46 #include <mach/regs-gpio.h>
  47 #include <mach/regs-lcd.h>
  48 #include <mach/gpio-samsung.h>
  49
  50 #include "common.h"
  51 #include "osiris.h"
  52 #include "regs-mem.h"
  53
  54 /* onboard perihperal map */
  55
  56 static struct map_desc osiris_iodesc[] __initdata = {
  57   /* ISA IO areas (may be over-written later) */
  58
  59   {
  60           .virtual      = (u32)S3C24XX_VA_ISA_BYTE,
  61           .pfn          = __phys_to_pfn(S3C2410_CS5),
  62           .length       = SZ_16M,
  63           .type         = MT_DEVICE,
  64   }, {
  65           .virtual      = (u32)S3C24XX_VA_ISA_WORD,
  66           .pfn          = __phys_to_pfn(S3C2410_CS5),
  67           .length       = SZ_16M,
  68           .type         = MT_DEVICE,
  69   },
  70
  71   /* CPLD control registers */
  72
  73   {
  74           .virtual      = (u32)OSIRIS_VA_CTRL0,
  75           .pfn          = __phys_to_pfn(OSIRIS_PA_CTRL0),
  76           .length       = SZ_16K,
  77           .type         = MT_DEVICE,
  78   }, {
  79           .virtual      = (u32)OSIRIS_VA_CTRL1,
  80           .pfn          = __phys_to_pfn(OSIRIS_PA_CTRL1),
  81           .length       = SZ_16K,
  82           .type         = MT_DEVICE,
  83   }, {
  84           .virtual      = (u32)OSIRIS_VA_CTRL2,
  85           .pfn          = __phys_to_pfn(OSIRIS_PA_CTRL2),
  86           .length       = SZ_16K,
  87           .type         = MT_DEVICE,
  88   }, {
  89           .virtual      = (u32)OSIRIS_VA_IDREG,
  90           .pfn          = __phys_to_pfn(OSIRIS_PA_IDREG),
  91           .length       = SZ_16K,
  92           .type         = MT_DEVICE,
  93   },
  94 };
  95
  96 #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
  97 #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
  98 #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
  99
 100 static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = {
 101         [0] = {
 102                 .hwport      = 0,
 103                 .flags       = 0,
 104                 .ucon        = UCON,
 105                 .ulcon       = ULCON,
 106                 .ufcon       = UFCON,
 107                 .clk_sel        = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
 108         },
 109         [1] = {
 110                 .hwport      = 1,
 111                 .flags       = 0,
 112                 .ucon        = UCON,
 113                 .ulcon       = ULCON,
 114                 .ufcon       = UFCON,
 115                 .clk_sel        = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
 116         },
 117         [2] = {
 118                 .hwport      = 2,
 119                 .flags       = 0,
 120                 .ucon        = UCON,
 121                 .ulcon       = ULCON,
 122                 .ufcon       = UFCON,
 123                 .clk_sel        = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
 124         }
 125 };
 126
 127 /* NAND Flash on Osiris board */
 128
 129 static int external_map[]   = { 2 };
 130 static int chip0_map[]      = { 0 };
 131 static int chip1_map[]      = { 1 };
 132
 133 static struct mtd_partition __initdata osiris_default_nand_part[] = {
 134         [0] = {
 135                 .name   = "Boot Agent",
 136                 .size   = SZ_16K,
 137                 .offset = 0,
 138         },
 139         [1] = {
 140                 .name   = "/boot",
 141                 .size   = SZ_4M - SZ_16K,
 142                 .offset = SZ_16K,
 143         },
 144         [2] = {
 145                 .name   = "user1",
 146                 .offset = SZ_4M,
 147                 .size   = SZ_32M - SZ_4M,
 148         },
 149         [3] = {
 150                 .name   = "user2",
 151                 .offset = SZ_32M,
 152                 .size   = MTDPART_SIZ_FULL,
 153         }
 154 };
 155
 156 static struct mtd_partition __initdata osiris_default_nand_part_large[] = {
 157         [0] = {
 158                 .name   = "Boot Agent",
 159                 .size   = SZ_128K,
 160                 .offset = 0,
 161         },
 162         [1] = {
 163                 .name   = "/boot",
 164                 .size   = SZ_4M - SZ_128K,
 165                 .offset = SZ_128K,
 166         },
 167         [2] = {
 168                 .name   = "user1",
 169                 .offset = SZ_4M,
 170                 .size   = SZ_32M - SZ_4M,
 171         },
 172         [3] = {
 173                 .name   = "user2",
 174                 .offset = SZ_32M,
 175                 .size   = MTDPART_SIZ_FULL,
 176         }
 177 };
 178
 179 /* the Osiris has 3 selectable slots for nand-flash, the two
 180  * on-board chip areas, as well as the external slot.
 181  *
 182  * Note, there is no current hot-plug support for the External
 183  * socket.
 184 */
 185
 186 static struct s3c2410_nand_set __initdata osiris_nand_sets[] = {
 187         [1] = {
 188                 .name           = "External",
 189                 .nr_chips       = 1,
 190                 .nr_map         = external_map,
 191                 .options        = NAND_SCAN_SILENT_NODEV,
 192                 .nr_partitions  = ARRAY_SIZE(osiris_default_nand_part),
 193                 .partitions     = osiris_default_nand_part,
 194         },
 195         [0] = {
 196                 .name           = "chip0",
 197                 .nr_chips       = 1,
 198                 .nr_map         = chip0_map,
 199                 .nr_partitions  = ARRAY_SIZE(osiris_default_nand_part),
 200                 .partitions     = osiris_default_nand_part,
 201         },
 202         [2] = {
 203                 .name           = "chip1",
 204                 .nr_chips       = 1,
 205                 .nr_map         = chip1_map,
 206                 .options        = NAND_SCAN_SILENT_NODEV,
 207                 .nr_partitions  = ARRAY_SIZE(osiris_default_nand_part),
 208                 .partitions     = osiris_default_nand_part,
 209         },
 210 };
 211
 212 static void osiris_nand_select(struct s3c2410_nand_set *set, int slot)
 213 {
 214         unsigned int tmp;
 215
 216         slot = set->nr_map[slot] & 3;
 217
 218         pr_debug("osiris_nand: selecting slot %d (set %p,%p)\n",
 219                  slot, set, set->nr_map);
 220
 221         tmp = __raw_readb(OSIRIS_VA_CTRL0);
 222         tmp &= ~OSIRIS_CTRL0_NANDSEL;
 223         tmp |= slot;
 224
 225         pr_debug("osiris_nand: ctrl0 now %02x\n", tmp);
 226
 227         __raw_writeb(tmp, OSIRIS_VA_CTRL0);
 228 }
 229
 230 static struct s3c2410_platform_nand __initdata osiris_nand_info = {
 231         .tacls          = 25,
 232         .twrph0         = 60,
 233         .twrph1         = 60,
 234         .nr_sets        = ARRAY_SIZE(osiris_nand_sets),
 235         .sets           = osiris_nand_sets,
 236         .select_chip    = osiris_nand_select,
 237         .ecc_mode       = NAND_ECC_SOFT,
 238 };
 239
 240 /* PCMCIA control and configuration */
 241
 242 static struct resource osiris_pcmcia_resource[] = {
 243         [0] = DEFINE_RES_MEM(0x0f000000, SZ_1M),
 244         [1] = DEFINE_RES_MEM(0x0c000000, SZ_1M),
 245 };
 246
 247 static struct platform_device osiris_pcmcia = {
 248         .name           = "osiris-pcmcia",
 249         .id             = -1,
 250         .num_resources  = ARRAY_SIZE(osiris_pcmcia_resource),
 251         .resource       = osiris_pcmcia_resource,
 252 };
 253
 254 /* Osiris power management device */
 255
 256 #ifdef CONFIG_PM
 257 static unsigned char pm_osiris_ctrl0;
 258
 259 static int osiris_pm_suspend(void)
 260 {
 261         unsigned int tmp;
 262
 263         pm_osiris_ctrl0 = __raw_readb(OSIRIS_VA_CTRL0);
 264         tmp = pm_osiris_ctrl0 & ~OSIRIS_CTRL0_NANDSEL;
 265
 266         /* ensure correct NAND slot is selected on resume */
 267         if ((pm_osiris_ctrl0 & OSIRIS_CTRL0_BOOT_INT) == 0)
 268                 tmp |= 2;
 269
 270         __raw_writeb(tmp, OSIRIS_VA_CTRL0);
 271
 272         /* ensure that an nRESET is not generated on resume. */
 273         gpio_request_one(S3C2410_GPA(21), GPIOF_OUT_INIT_HIGH, NULL);
 274         gpio_free(S3C2410_GPA(21));
 275
 276         return 0;
 277 }
 278
 279 static void osiris_pm_resume(void)
 280 {
 281         if (pm_osiris_ctrl0 & OSIRIS_CTRL0_FIX8)
 282                 __raw_writeb(OSIRIS_CTRL1_FIX8, OSIRIS_VA_CTRL1);
 283
 284         __raw_writeb(pm_osiris_ctrl0, OSIRIS_VA_CTRL0);
 285
 286         s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
 287 }
 288
 289 #else
 290 #define osiris_pm_suspend NULL
 291 #define osiris_pm_resume NULL
 292 #endif
 293
 294 static struct syscore_ops osiris_pm_syscore_ops = {
 295         .suspend        = osiris_pm_suspend,
 296         .resume         = osiris_pm_resume,
 297 };
 298
 299 /* Link for DVS driver to TPS65011 */
 300
 301 static void osiris_tps_release(struct device *dev)
 302 {
 303         /* static device, do not need to release anything */
 304 }
 305
 306 static struct platform_device osiris_tps_device = {
 307         .name   = "osiris-dvs",
 308         .id     = -1,
 309         .dev.release = osiris_tps_release,
 310 };
 311
 312 static int osiris_tps_setup(struct i2c_client *client, void *context)
 313 {
 314         osiris_tps_device.dev.parent = &client->dev;
 315         return platform_device_register(&osiris_tps_device);
 316 }
 317
 318 static int osiris_tps_remove(struct i2c_client *client, void *context)
 319 {
 320         platform_device_unregister(&osiris_tps_device);
 321         return 0;
 322 }
 323
 324 static struct tps65010_board osiris_tps_board = {
 325         .base           = -1,   /* GPIO can go anywhere at the moment */
 326         .setup          = osiris_tps_setup,
 327         .teardown       = osiris_tps_remove,
 328 };
 329
 330 /* I2C devices fitted. */
 331
 332 static struct i2c_board_info osiris_i2c_devs[] __initdata = {
 333         {
 334                 I2C_BOARD_INFO("tps65011", 0x48),
 335                 .irq    = IRQ_EINT20,
 336                 .platform_data = &osiris_tps_board,
 337         },
 338 };
 339
 340 /* Standard Osiris devices */
 341
 342 static struct platform_device *osiris_devices[] __initdata = {
 343         &s3c2410_device_dclk,
 344         &s3c_device_i2c0,
 345         &s3c_device_wdt,
 346         &s3c_device_nand,
 347         &osiris_pcmcia,
 348 };
 349
 350 static struct s3c_cpufreq_board __initdata osiris_cpufreq = {
 351         .refresh        = 7800, /* refresh period is 7.8usec */
 352         .auto_io        = 1,
 353         .need_io        = 1,
 354 };
 355
 356 static void __init osiris_map_io(void)
 357 {
 358         unsigned long flags;
 359
 360         s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
 361         s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
 362         samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 363
 364         /* check for the newer revision boards with large page nand */
 365
 366         if ((__raw_readb(OSIRIS_VA_IDREG) & OSIRIS_ID_REVMASK) >= 4) {
 367                 printk(KERN_INFO "OSIRIS-B detected (revision %d)\n",
 368                        __raw_readb(OSIRIS_VA_IDREG) & OSIRIS_ID_REVMASK);
 369                 osiris_nand_sets[0].partitions = osiris_default_nand_part_large;
 370                 osiris_nand_sets[0].nr_partitions = ARRAY_SIZE(osiris_default_nand_part_large);
 371         } else {
 372                 /* write-protect line to the NAND */
 373                 gpio_request_one(S3C2410_GPA(0), GPIOF_OUT_INIT_HIGH, NULL);
 374                 gpio_free(S3C2410_GPA(0));
 375         }
 376
 377         /* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */
 378
 379         local_irq_save(flags);
 380         __raw_writel(__raw_readl(S3C2410_BWSCON) | S3C2410_BWSCON_ST1 | S3C2410_BWSCON_ST2 | S3C2410_BWSCON_ST3 | S3C2410_BWSCON_ST4 | S3C2410_BWSCON_ST5, S3C2410_BWSCON);
 381         local_irq_restore(flags);
 382 }
 383
 384 static void __init osiris_init_time(void)
 385 {
 386         s3c2440_init_clocks(12000000);
 387         samsung_timer_init();
 388 }
 389
 390 static void __init osiris_init(void)
 391 {
 392         register_syscore_ops(&osiris_pm_syscore_ops);
 393
 394         s3c_i2c0_set_platdata(NULL);
 395         s3c_nand_set_platdata(&osiris_nand_info);
 396
 397         s3c_cpufreq_setboard(&osiris_cpufreq);
 398
 399         i2c_register_board_info(0, osiris_i2c_devs,
 400                                 ARRAY_SIZE(osiris_i2c_devs));
 401
 402         platform_add_devices(osiris_devices, ARRAY_SIZE(osiris_devices));
 403 };
 404
 405 MACHINE_START(OSIRIS, "Simtec-OSIRIS")
 406         /* Maintainer: Ben Dooks <ben@simtec.co.uk> */
 407         .atag_offset    = 0x100,
 408         .map_io         = osiris_map_io,
 409         .init_irq       = s3c2440_init_irq,
 410         .init_machine   = osiris_init,
 411         .init_time      = osiris_init_time,
 412 MACHINE_END