arch/arm/mach-realview/core.c

   1 /*
   2  *  linux/arch/arm/mach-realview/core.c
   3  *
   4  *  Copyright (C) 1999 - 2003 ARM Limited
   5  *  Copyright (C) 2000 Deep Blue Solutions Ltd
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License as published by
   9  * the Free Software Foundation; either version 2 of the License, or
  10  * (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  20  */
  21 #include <linux/init.h>
  22 #include <linux/platform_device.h>
  23 #include <linux/dma-mapping.h>
  24 #include <linux/sysdev.h>
  25 #include <linux/interrupt.h>
  26 #include <linux/amba/bus.h>
  27 #include <linux/amba/clcd.h>
  28 #include <linux/io.h>
  29 #include <linux/smsc911x.h>
  30 #include <linux/ata_platform.h>
  31 #include <linux/amba/mmci.h>
  32 #include <linux/gfp.h>
  33
  34 #include <asm/clkdev.h>
  35 #include <asm/system.h>
  36 #include <mach/hardware.h>
  37 #include <asm/irq.h>
  38 #include <asm/leds.h>
  39 #include <asm/mach-types.h>
  40 #include <asm/hardware/arm_timer.h>
  41 #include <asm/hardware/icst.h>
  42
  43 #include <asm/mach/arch.h>
  44 #include <asm/mach/flash.h>
  45 #include <asm/mach/irq.h>
  46 #include <asm/mach/map.h>
  47
  48 #include <asm/hardware/gic.h>
  49
  50 #include <mach/clkdev.h>
  51 #include <mach/platform.h>
  52 #include <mach/irqs.h>
  53 #include <plat/timer-sp.h>
  54
  55 #include "core.h"
  56
  57 /* used by entry-macro.S and platsmp.c */
  58 void __iomem *gic_cpu_base_addr;
  59
  60 #ifdef CONFIG_ZONE_DMA
  61 /*
  62  * Adjust the zones if there are restrictions for DMA access.
  63  */
  64 void __init realview_adjust_zones(unsigned long *size, unsigned long *hole)
  65 {
  66         unsigned long dma_size = SZ_256M >> PAGE_SHIFT;
  67
  68         if (!machine_is_realview_pbx() || size[0] <= dma_size)
  69                 return;
  70
  71         size[ZONE_NORMAL] = size[0] - dma_size;
  72         size[ZONE_DMA] = dma_size;
  73         hole[ZONE_NORMAL] = hole[0];
  74         hole[ZONE_DMA] = 0;
  75 }
  76 #endif
  77
  78
  79 #define REALVIEW_FLASHCTRL    (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_FLASH_OFFSET)
  80
  81 static int realview_flash_init(void)
  82 {
  83         u32 val;
  84
  85         val = __raw_readl(REALVIEW_FLASHCTRL);
  86         val &= ~REALVIEW_FLASHPROG_FLVPPEN;
  87         __raw_writel(val, REALVIEW_FLASHCTRL);
  88
  89         return 0;
  90 }
  91
  92 static void realview_flash_exit(void)
  93 {
  94         u32 val;
  95
  96         val = __raw_readl(REALVIEW_FLASHCTRL);
  97         val &= ~REALVIEW_FLASHPROG_FLVPPEN;
  98         __raw_writel(val, REALVIEW_FLASHCTRL);
  99 }
 100
 101 static void realview_flash_set_vpp(int on)
 102 {
 103         u32 val;
 104
 105         val = __raw_readl(REALVIEW_FLASHCTRL);
 106         if (on)
 107                 val |= REALVIEW_FLASHPROG_FLVPPEN;
 108         else
 109                 val &= ~REALVIEW_FLASHPROG_FLVPPEN;
 110         __raw_writel(val, REALVIEW_FLASHCTRL);
 111 }
 112
 113 static struct flash_platform_data realview_flash_data = {
 114         .map_name               = "cfi_probe",
 115         .width                  = 4,
 116         .init                   = realview_flash_init,
 117         .exit                   = realview_flash_exit,
 118         .set_vpp                = realview_flash_set_vpp,
 119 };
 120
 121 struct platform_device realview_flash_device = {
 122         .name                   = "armflash",
 123         .id                     = 0,
 124         .dev                    = {
 125                 .platform_data  = &realview_flash_data,
 126         },
 127 };
 128
 129 int realview_flash_register(struct resource *res, u32 num)
 130 {
 131         realview_flash_device.resource = res;
 132         realview_flash_device.num_resources = num;
 133         return platform_device_register(&realview_flash_device);
 134 }
 135
 136 static struct smsc911x_platform_config smsc911x_config = {
 137         .flags          = SMSC911X_USE_32BIT,
 138         .irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
 139         .irq_type       = SMSC911X_IRQ_TYPE_PUSH_PULL,
 140         .phy_interface  = PHY_INTERFACE_MODE_MII,
 141 };
 142
 143 static struct platform_device realview_eth_device = {
 144         .name           = "smsc911x",
 145         .id             = 0,
 146         .num_resources  = 2,
 147 };
 148
 149 int realview_eth_register(const char *name, struct resource *res)
 150 {
 151         if (name)
 152                 realview_eth_device.name = name;
 153         realview_eth_device.resource = res;
 154         if (strcmp(realview_eth_device.name, "smsc911x") == 0)
 155                 realview_eth_device.dev.platform_data = &smsc911x_config;
 156
 157         return platform_device_register(&realview_eth_device);
 158 }
 159
 160 struct platform_device realview_usb_device = {
 161         .name                   = "isp1760",
 162         .num_resources          = 2,
 163 };
 164
 165 int realview_usb_register(struct resource *res)
 166 {
 167         realview_usb_device.resource = res;
 168         return platform_device_register(&realview_usb_device);
 169 }
 170
 171 static struct pata_platform_info pata_platform_data = {
 172         .ioport_shift           = 1,
 173 };
 174
 175 static struct resource pata_resources[] = {
 176         [0] = {
 177                 .start          = REALVIEW_CF_BASE,
 178                 .end            = REALVIEW_CF_BASE + 0xff,
 179                 .flags          = IORESOURCE_MEM,
 180         },
 181         [1] = {
 182                 .start          = REALVIEW_CF_BASE + 0x100,
 183                 .end            = REALVIEW_CF_BASE + SZ_4K - 1,
 184                 .flags          = IORESOURCE_MEM,
 185         },
 186 };
 187
 188 struct platform_device realview_cf_device = {
 189         .name                   = "pata_platform",
 190         .id                     = -1,
 191         .num_resources          = ARRAY_SIZE(pata_resources),
 192         .resource               = pata_resources,
 193         .dev                    = {
 194                 .platform_data  = &pata_platform_data,
 195         },
 196 };
 197
 198 static struct resource realview_i2c_resource = {
 199         .start          = REALVIEW_I2C_BASE,
 200         .end            = REALVIEW_I2C_BASE + SZ_4K - 1,
 201         .flags          = IORESOURCE_MEM,
 202 };
 203
 204 struct platform_device realview_i2c_device = {
 205         .name           = "versatile-i2c",
 206         .id             = 0,
 207         .num_resources  = 1,
 208         .resource       = &realview_i2c_resource,
 209 };
 210
 211 static struct i2c_board_info realview_i2c_board_info[] = {
 212         {
 213                 I2C_BOARD_INFO("ds1338", 0xd0 >> 1),
 214         },
 215 };
 216
 217 static int __init realview_i2c_init(void)
 218 {
 219         return i2c_register_board_info(0, realview_i2c_board_info,
 220                                        ARRAY_SIZE(realview_i2c_board_info));
 221 }
 222 arch_initcall(realview_i2c_init);
 223
 224 #define REALVIEW_SYSMCI (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_MCI_OFFSET)
 225
 226 /*
 227  * This is only used if GPIOLIB support is disabled
 228  */
 229 static unsigned int realview_mmc_status(struct device *dev)
 230 {
 231         struct amba_device *adev = container_of(dev, struct amba_device, dev);
 232         u32 mask;
 233
 234         if (machine_is_realview_pb1176()) {
 235                 static bool inserted = false;
 236
 237                 /*
 238                  * The PB1176 does not have the status register,
 239                  * assume it is inserted at startup, then invert
 240                  * for each call so card insertion/removal will
 241                  * be detected anyway. This will not be called if
 242                  * GPIO on PL061 is active, which is the proper
 243                  * way to do this on the PB1176.
 244                  */
 245                 inserted = !inserted;
 246                 return inserted ? 0 : 1;
 247         }
 248
 249         if (adev->res.start == REALVIEW_MMCI0_BASE)
 250                 mask = 1;
 251         else
 252                 mask = 2;
 253
 254         return readl(REALVIEW_SYSMCI) & mask;
 255 }
 256
 257 struct mmci_platform_data realview_mmc0_plat_data = {
 258         .ocr_mask       = MMC_VDD_32_33|MMC_VDD_33_34,
 259         .status         = realview_mmc_status,
 260         .gpio_wp        = 17,
 261         .gpio_cd        = 16,
 262 };
 263
 264 struct mmci_platform_data realview_mmc1_plat_data = {
 265         .ocr_mask       = MMC_VDD_32_33|MMC_VDD_33_34,
 266         .status         = realview_mmc_status,
 267         .gpio_wp        = 19,
 268         .gpio_cd        = 18,
 269 };
 270
 271 /*
 272  * Clock handling
 273  */
 274 static const struct icst_params realview_oscvco_params = {
 275         .ref            = 24000000,
 276         .vco_max        = ICST307_VCO_MAX,
 277         .vco_min        = ICST307_VCO_MIN,
 278         .vd_min         = 4 + 8,
 279         .vd_max         = 511 + 8,
 280         .rd_min         = 1 + 2,
 281         .rd_max         = 127 + 2,
 282         .s2div          = icst307_s2div,
 283         .idx2s          = icst307_idx2s,
 284 };
 285
 286 static void realview_oscvco_set(struct clk *clk, struct icst_vco vco)
 287 {
 288         void __iomem *sys_lock = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LOCK_OFFSET;
 289         u32 val;
 290
 291         val = readl(clk->vcoreg) & ~0x7ffff;
 292         val |= vco.v | (vco.r << 9) | (vco.s << 16);
 293
 294         writel(0xa05f, sys_lock);
 295         writel(val, clk->vcoreg);
 296         writel(0, sys_lock);
 297 }
 298
 299 static const struct clk_ops oscvco_clk_ops = {
 300         .round  = icst_clk_round,
 301         .set    = icst_clk_set,
 302         .setvco = realview_oscvco_set,
 303 };
 304
 305 static struct clk oscvco_clk = {
 306         .ops    = &oscvco_clk_ops,
 307         .params = &realview_oscvco_params,
 308 };
 309
 310 /*
 311  * These are fixed clocks.
 312  */
 313 static struct clk ref24_clk = {
 314         .rate   = 24000000,
 315 };
 316
 317 static struct clk dummy_apb_pclk;
 318
 319 static struct clk_lookup lookups[] = {
 320         {       /* Bus clock */
 321                 .con_id         = "apb_pclk",
 322                 .clk            = &dummy_apb_pclk,
 323         }, {    /* UART0 */
 324                 .dev_id         = "dev:uart0",
 325                 .clk            = &ref24_clk,
 326         }, {    /* UART1 */
 327                 .dev_id         = "dev:uart1",
 328                 .clk            = &ref24_clk,
 329         }, {    /* UART2 */
 330                 .dev_id         = "dev:uart2",
 331                 .clk            = &ref24_clk,
 332         }, {    /* UART3 */
 333                 .dev_id         = "fpga:uart3",
 334                 .clk            = &ref24_clk,
 335         }, {    /* UART3 is on the dev chip in PB1176 */
 336                 .dev_id         = "dev:uart3",
 337                 .clk            = &ref24_clk,
 338         }, {    /* UART4 only exists in PB1176 */
 339                 .dev_id         = "fpga:uart4",
 340                 .clk            = &ref24_clk,
 341         }, {    /* KMI0 */
 342                 .dev_id         = "fpga:kmi0",
 343                 .clk            = &ref24_clk,
 344         }, {    /* KMI1 */
 345                 .dev_id         = "fpga:kmi1",
 346                 .clk            = &ref24_clk,
 347         }, {    /* MMC0 */
 348                 .dev_id         = "fpga:mmc0",
 349                 .clk            = &ref24_clk,
 350         }, {    /* CLCD is in the PB1176 and EB DevChip */
 351                 .dev_id         = "dev:clcd",
 352                 .clk            = &oscvco_clk,
 353         }, {    /* PB:CLCD */
 354                 .dev_id         = "issp:clcd",
 355                 .clk            = &oscvco_clk,
 356         }, {    /* SSP */
 357                 .dev_id         = "dev:ssp0",
 358                 .clk            = &ref24_clk,
 359         }
 360 };
 361
 362 static int __init clk_init(void)
 363 {
 364         if (machine_is_realview_pb1176())
 365                 oscvco_clk.vcoreg = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC0_OFFSET;
 366         else
 367                 oscvco_clk.vcoreg = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC4_OFFSET;
 368
 369         clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 370
 371         return 0;
 372 }
 373 core_initcall(clk_init);
 374
 375 /*
 376  * CLCD support.
 377  */
 378 #define SYS_CLCD_NLCDIOON       (1 << 2)
 379 #define SYS_CLCD_VDDPOSSWITCH   (1 << 3)
 380 #define SYS_CLCD_PWR3V5SWITCH   (1 << 4)
 381 #define SYS_CLCD_ID_MASK        (0x1f << 8)
 382 #define SYS_CLCD_ID_SANYO_3_8   (0x00 << 8)
 383 #define SYS_CLCD_ID_UNKNOWN_8_4 (0x01 << 8)
 384 #define SYS_CLCD_ID_EPSON_2_2   (0x02 << 8)
 385 #define SYS_CLCD_ID_SANYO_2_5   (0x07 << 8)
 386 #define SYS_CLCD_ID_VGA         (0x1f << 8)
 387
 388 static struct clcd_panel vga = {
 389         .mode           = {
 390                 .name           = "VGA",
 391                 .refresh        = 60,
 392                 .xres           = 640,
 393                 .yres           = 480,
 394                 .pixclock       = 39721,
 395                 .left_margin    = 40,
 396                 .right_margin   = 24,
 397                 .upper_margin   = 32,
 398                 .lower_margin   = 11,
 399                 .hsync_len      = 96,
 400                 .vsync_len      = 2,
 401                 .sync           = 0,
 402                 .vmode          = FB_VMODE_NONINTERLACED,
 403         },
 404         .width          = -1,
 405         .height         = -1,
 406         .tim2           = TIM2_BCD | TIM2_IPC,
 407         .cntl           = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
 408         .bpp            = 16,
 409 };
 410
 411 static struct clcd_panel xvga = {
 412         .mode           = {
 413                 .name           = "XVGA",
 414                 .refresh        = 60,
 415                 .xres           = 1024,
 416                 .yres           = 768,
 417                 .pixclock       = 15748,
 418                 .left_margin    = 152,
 419                 .right_margin   = 48,
 420                 .upper_margin   = 23,
 421                 .lower_margin   = 3,
 422                 .hsync_len      = 104,
 423                 .vsync_len      = 4,
 424                 .sync           = 0,
 425                 .vmode          = FB_VMODE_NONINTERLACED,
 426         },
 427         .width          = -1,
 428         .height         = -1,
 429         .tim2           = TIM2_BCD | TIM2_IPC,
 430         .cntl           = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
 431         .bpp            = 16,
 432 };
 433
 434 static struct clcd_panel sanyo_3_8_in = {
 435         .mode           = {
 436                 .name           = "Sanyo QVGA",
 437                 .refresh        = 116,
 438                 .xres           = 320,
 439                 .yres           = 240,
 440                 .pixclock       = 100000,
 441                 .left_margin    = 6,
 442                 .right_margin   = 6,
 443                 .upper_margin   = 5,
 444                 .lower_margin   = 5,
 445                 .hsync_len      = 6,
 446                 .vsync_len      = 6,
 447                 .sync           = 0,
 448                 .vmode          = FB_VMODE_NONINTERLACED,
 449         },
 450         .width          = -1,
 451         .height         = -1,
 452         .tim2           = TIM2_BCD,
 453         .cntl           = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
 454         .bpp            = 16,
 455 };
 456
 457 static struct clcd_panel sanyo_2_5_in = {
 458         .mode           = {
 459                 .name           = "Sanyo QVGA Portrait",
 460                 .refresh        = 116,
 461                 .xres           = 240,
 462                 .yres           = 320,
 463                 .pixclock       = 100000,
 464                 .left_margin    = 20,
 465                 .right_margin   = 10,
 466                 .upper_margin   = 2,
 467                 .lower_margin   = 2,
 468                 .hsync_len      = 10,
 469                 .vsync_len      = 2,
 470                 .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 471                 .vmode          = FB_VMODE_NONINTERLACED,
 472         },
 473         .width          = -1,
 474         .height         = -1,
 475         .tim2           = TIM2_IVS | TIM2_IHS | TIM2_IPC,
 476         .cntl           = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
 477         .bpp            = 16,
 478 };
 479
 480 static struct clcd_panel epson_2_2_in = {
 481         .mode           = {
 482                 .name           = "Epson QCIF",
 483                 .refresh        = 390,
 484                 .xres           = 176,
 485                 .yres           = 220,
 486                 .pixclock       = 62500,
 487                 .left_margin    = 3,
 488                 .right_margin   = 2,
 489                 .upper_margin   = 1,
 490                 .lower_margin   = 0,
 491                 .hsync_len      = 3,
 492                 .vsync_len      = 2,
 493                 .sync           = 0,
 494                 .vmode          = FB_VMODE_NONINTERLACED,
 495         },
 496         .width          = -1,
 497         .height         = -1,
 498         .tim2           = TIM2_BCD | TIM2_IPC,
 499         .cntl           = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
 500         .bpp            = 16,
 501 };
 502
 503 /*
 504  * Detect which LCD panel is connected, and return the appropriate
 505  * clcd_panel structure.  Note: we do not have any information on
 506  * the required timings for the 8.4in panel, so we presently assume
 507  * VGA timings.
 508  */
 509 static struct clcd_panel *realview_clcd_panel(void)
 510 {
 511         void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
 512         struct clcd_panel *vga_panel;
 513         struct clcd_panel *panel;
 514         u32 val;
 515
 516         if (machine_is_realview_eb())
 517                 vga_panel = &vga;
 518         else
 519                 vga_panel = &xvga;
 520
 521         val = readl(sys_clcd) & SYS_CLCD_ID_MASK;
 522         if (val == SYS_CLCD_ID_SANYO_3_8)
 523                 panel = &sanyo_3_8_in;
 524         else if (val == SYS_CLCD_ID_SANYO_2_5)
 525                 panel = &sanyo_2_5_in;
 526         else if (val == SYS_CLCD_ID_EPSON_2_2)
 527                 panel = &epson_2_2_in;
 528         else if (val == SYS_CLCD_ID_VGA)
 529                 panel = vga_panel;
 530         else {
 531                 printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n",
 532                         val);
 533                 panel = vga_panel;
 534         }
 535
 536         return panel;
 537 }
 538
 539 /*
 540  * Disable all display connectors on the interface module.
 541  */
 542 static void realview_clcd_disable(struct clcd_fb *fb)
 543 {
 544         void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
 545         u32 val;
 546
 547         val = readl(sys_clcd);
 548         val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
 549         writel(val, sys_clcd);
 550 }
 551
 552 /*
 553  * Enable the relevant connector on the interface module.
 554  */
 555 static void realview_clcd_enable(struct clcd_fb *fb)
 556 {
 557         void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
 558         u32 val;
 559
 560         /*
 561          * Enable the PSUs
 562          */
 563         val = readl(sys_clcd);
 564         val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
 565         writel(val, sys_clcd);
 566 }
 567
 568 static int realview_clcd_setup(struct clcd_fb *fb)
 569 {
 570         unsigned long framesize;
 571         dma_addr_t dma;
 572
 573         if (machine_is_realview_eb())
 574                 /* VGA, 16bpp */
 575                 framesize = 640 * 480 * 2;
 576         else
 577                 /* XVGA, 16bpp */
 578                 framesize = 1024 * 768 * 2;
 579
 580         fb->panel               = realview_clcd_panel();
 581
 582         fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize,
 583                                                     &dma, GFP_KERNEL | GFP_DMA);
 584         if (!fb->fb.screen_base) {
 585                 printk(KERN_ERR "CLCD: unable to map framebuffer\n");
 586                 return -ENOMEM;
 587         }
 588
 589         fb->fb.fix.smem_start   = dma;
 590         fb->fb.fix.smem_len     = framesize;
 591
 592         return 0;
 593 }
 594
 595 static int realview_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
 596 {
 597         return dma_mmap_writecombine(&fb->dev->dev, vma,
 598                                      fb->fb.screen_base,
 599                                      fb->fb.fix.smem_start,
 600                                      fb->fb.fix.smem_len);
 601 }
 602
 603 static void realview_clcd_remove(struct clcd_fb *fb)
 604 {
 605         dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
 606                               fb->fb.screen_base, fb->fb.fix.smem_start);
 607 }
 608
 609 struct clcd_board clcd_plat_data = {
 610         .name           = "RealView",
 611         .check          = clcdfb_check,
 612         .decode         = clcdfb_decode,
 613         .disable        = realview_clcd_disable,
 614         .enable         = realview_clcd_enable,
 615         .setup          = realview_clcd_setup,
 616         .mmap           = realview_clcd_mmap,
 617         .remove         = realview_clcd_remove,
 618 };
 619
 620 #ifdef CONFIG_LEDS
 621 #define VA_LEDS_BASE (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LED_OFFSET)
 622
 623 void realview_leds_event(led_event_t ledevt)
 624 {
 625         unsigned long flags;
 626         u32 val;
 627         u32 led = 1 << smp_processor_id();
 628
 629         local_irq_save(flags);
 630         val = readl(VA_LEDS_BASE);
 631
 632         switch (ledevt) {
 633         case led_idle_start:
 634                 val = val & ~led;
 635                 break;
 636
 637         case led_idle_end:
 638                 val = val | led;
 639                 break;
 640
 641         case led_timer:
 642                 val = val ^ REALVIEW_SYS_LED7;
 643                 break;
 644
 645         case led_halted:
 646                 val = 0;
 647                 break;
 648
 649         default:
 650                 break;
 651         }
 652
 653         writel(val, VA_LEDS_BASE);
 654         local_irq_restore(flags);
 655 }
 656 #endif  /* CONFIG_LEDS */
 657
 658 /*
 659  * Where is the timer (VA)?
 660  */
 661 void __iomem *timer0_va_base;
 662 void __iomem *timer1_va_base;
 663 void __iomem *timer2_va_base;
 664 void __iomem *timer3_va_base;
 665
 666 /*
 667  * Set up the clock source and clock events devices
 668  */
 669 void __init realview_timer_init(unsigned int timer_irq)
 670 {
 671         u32 val;
 672
 673         /*
 674          * set clock frequency:
 675          *      REALVIEW_REFCLK is 32KHz
 676          *      REALVIEW_TIMCLK is 1MHz
 677          */
 678         val = readl(__io_address(REALVIEW_SCTL_BASE));
 679         writel((REALVIEW_TIMCLK << REALVIEW_TIMER1_EnSel) |
 680                (REALVIEW_TIMCLK << REALVIEW_TIMER2_EnSel) |
 681                (REALVIEW_TIMCLK << REALVIEW_TIMER3_EnSel) |
 682                (REALVIEW_TIMCLK << REALVIEW_TIMER4_EnSel) | val,
 683                __io_address(REALVIEW_SCTL_BASE));
 684
 685         /*
 686          * Initialise to a known state (all timers off)
 687          */
 688         writel(0, timer0_va_base + TIMER_CTRL);
 689         writel(0, timer1_va_base + TIMER_CTRL);
 690         writel(0, timer2_va_base + TIMER_CTRL);
 691         writel(0, timer3_va_base + TIMER_CTRL);
 692
 693         sp804_clocksource_init(timer3_va_base);
 694         sp804_clockevents_init(timer0_va_base, timer_irq);
 695 }
 696
 697 /*
 698  * Setup the memory banks.
 699  */
 700 void realview_fixup(struct machine_desc *mdesc, struct tag *tags, char **from,
 701                     struct meminfo *meminfo)
 702 {
 703         /*
 704          * Most RealView platforms have 512MB contiguous RAM at 0x70000000.
 705          * Half of this is mirrored at 0.
 706          */
 707 #ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET
 708         meminfo->bank[0].start = 0x70000000;
 709         meminfo->bank[0].size = SZ_512M;
 710         meminfo->nr_banks = 1;
 711 #else
 712         meminfo->bank[0].start = 0;
 713         meminfo->bank[0].size = SZ_256M;
 714         meminfo->nr_banks = 1;
 715 #endif
 716 }