Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
[sfrench/cifs-2.6.git] / arch / arm / mach-pxa / tosa.c
1 /*
2  *  Support for Sharp SL-C6000x PDAs
3  *  Model: (Tosa)
4  *
5  *  Copyright (c) 2005 Dirk Opfer
6  *
7  *      Based on code written by Sharp/Lineo for 2.4 kernels
8  *
9  *  This program is free software; you can redistribute it and/or modify
10  *  it under the terms of the GNU General Public License version 2 as
11  *  published by the Free Software Foundation.
12  *
13  */
14
15 #include <linux/kernel.h>
16 #include <linux/init.h>
17 #include <linux/platform_device.h>
18 #include <linux/major.h>
19 #include <linux/fs.h>
20 #include <linux/interrupt.h>
21 #include <linux/mmc/host.h>
22 #include <linux/pm.h>
23 #include <linux/delay.h>
24 #include <linux/gpio_keys.h>
25 #include <linux/input.h>
26
27 #include <asm/setup.h>
28 #include <asm/memory.h>
29 #include <asm/mach-types.h>
30 #include <asm/hardware.h>
31 #include <asm/irq.h>
32 #include <asm/system.h>
33 #include <asm/arch/pxa-regs.h>
34 #include <asm/arch/pxa2xx-regs.h>
35 #include <asm/arch/irda.h>
36 #include <asm/arch/mmc.h>
37 #include <asm/arch/udc.h>
38
39 #include <asm/mach/arch.h>
40 #include <asm/mach/map.h>
41 #include <asm/mach/irq.h>
42 #include <asm/arch/tosa.h>
43
44 #include <asm/hardware/scoop.h>
45 #include <asm/mach/sharpsl_param.h>
46
47 #include "generic.h"
48 #include "devices.h"
49
50 /*
51  * SCOOP Device
52  */
53 static struct resource tosa_scoop_resources[] = {
54         [0] = {
55                 .start  = TOSA_CF_PHYS,
56                 .end    = TOSA_CF_PHYS + 0xfff,
57                 .flags  = IORESOURCE_MEM,
58         },
59 };
60
61 static struct scoop_config tosa_scoop_setup = {
62         .io_dir         = TOSA_SCOOP_IO_DIR,
63         .io_out         = TOSA_SCOOP_IO_OUT,
64
65 };
66
67 struct platform_device tosascoop_device = {
68         .name           = "sharp-scoop",
69         .id             = 0,
70         .dev            = {
71                 .platform_data  = &tosa_scoop_setup,
72         },
73         .num_resources  = ARRAY_SIZE(tosa_scoop_resources),
74         .resource       = tosa_scoop_resources,
75 };
76
77
78 /*
79  * SCOOP Device Jacket
80  */
81 static struct resource tosa_scoop_jc_resources[] = {
82         [0] = {
83                 .start          = TOSA_SCOOP_PHYS + 0x40,
84                 .end            = TOSA_SCOOP_PHYS + 0xfff,
85                 .flags          = IORESOURCE_MEM,
86         },
87 };
88
89 static struct scoop_config tosa_scoop_jc_setup = {
90         .io_dir         = TOSA_SCOOP_JC_IO_DIR,
91         .io_out         = TOSA_SCOOP_JC_IO_OUT,
92 };
93
94 struct platform_device tosascoop_jc_device = {
95         .name           = "sharp-scoop",
96         .id             = 1,
97         .dev            = {
98                 .platform_data  = &tosa_scoop_jc_setup,
99                 .parent         = &tosascoop_device.dev,
100         },
101         .num_resources  = ARRAY_SIZE(tosa_scoop_jc_resources),
102         .resource       = tosa_scoop_jc_resources,
103 };
104
105 /*
106  * PCMCIA
107  */
108 static struct scoop_pcmcia_dev tosa_pcmcia_scoop[] = {
109 {
110         .dev        = &tosascoop_device.dev,
111         .irq        = TOSA_IRQ_GPIO_CF_IRQ,
112         .cd_irq     = TOSA_IRQ_GPIO_CF_CD,
113         .cd_irq_str = "PCMCIA0 CD",
114 },{
115         .dev        = &tosascoop_jc_device.dev,
116         .irq        = TOSA_IRQ_GPIO_JC_CF_IRQ,
117         .cd_irq     = -1,
118 },
119 };
120
121 static void tosa_pcmcia_init(void)
122 {
123         /* Setup default state of GPIO outputs
124            before we enable them as outputs. */
125         GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
126                 GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) |
127                 GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) |
128                 GPIO_bit(GPIO53_nPCE_2);
129
130         pxa_gpio_mode(GPIO48_nPOE_MD);
131         pxa_gpio_mode(GPIO49_nPWE_MD);
132         pxa_gpio_mode(GPIO50_nPIOR_MD);
133         pxa_gpio_mode(GPIO51_nPIOW_MD);
134         pxa_gpio_mode(GPIO55_nPREG_MD);
135         pxa_gpio_mode(GPIO56_nPWAIT_MD);
136         pxa_gpio_mode(GPIO57_nIOIS16_MD);
137         pxa_gpio_mode(GPIO52_nPCE_1_MD);
138         pxa_gpio_mode(GPIO53_nPCE_2_MD);
139         pxa_gpio_mode(GPIO54_pSKTSEL_MD);
140 }
141
142 static struct scoop_pcmcia_config tosa_pcmcia_config = {
143         .devs         = &tosa_pcmcia_scoop[0],
144         .num_devs     = 2,
145         .pcmcia_init  = tosa_pcmcia_init,
146 };
147
148 /*
149  * USB Device Controller
150  */
151 static void tosa_udc_command(int cmd)
152 {
153         switch(cmd)     {
154                 case PXA2XX_UDC_CMD_CONNECT:
155                         set_scoop_gpio(&tosascoop_jc_device.dev,TOSA_SCOOP_JC_USB_PULLUP);
156                         break;
157                 case PXA2XX_UDC_CMD_DISCONNECT:
158                         reset_scoop_gpio(&tosascoop_jc_device.dev,TOSA_SCOOP_JC_USB_PULLUP);
159                         break;
160         }
161 }
162
163 static struct pxa2xx_udc_mach_info udc_info __initdata = {
164         .udc_command            = tosa_udc_command,
165         .gpio_vbus              = TOSA_GPIO_USB_IN,
166         .gpio_vbus_inverted     = 1,
167 };
168
169 /*
170  * MMC/SD Device
171  */
172 static struct pxamci_platform_data tosa_mci_platform_data;
173
174 static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void *data)
175 {
176         int err;
177
178         /* setup GPIO for PXA25x MMC controller */
179         pxa_gpio_mode(GPIO6_MMCCLK_MD);
180         pxa_gpio_mode(GPIO8_MMCCS0_MD);
181         pxa_gpio_mode(TOSA_GPIO_nSD_DETECT | GPIO_IN);
182
183         tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250);
184
185         err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int,
186                           IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
187                                 "MMC/SD card detect", data);
188         if (err)
189                 printk(KERN_ERR "tosa_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
190
191         return err;
192 }
193
194 static void tosa_mci_setpower(struct device *dev, unsigned int vdd)
195 {
196         struct pxamci_platform_data* p_d = dev->platform_data;
197
198         if (( 1 << vdd) & p_d->ocr_mask) {
199                 set_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_PWR_ON);
200         } else {
201                 reset_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_PWR_ON);
202         }
203 }
204
205 static int tosa_mci_get_ro(struct device *dev)
206 {
207         return (read_scoop_reg(&tosascoop_device.dev, SCOOP_GPWR)&TOSA_SCOOP_SD_WP);
208 }
209
210 static void tosa_mci_exit(struct device *dev, void *data)
211 {
212         free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data);
213 }
214
215 static struct pxamci_platform_data tosa_mci_platform_data = {
216         .ocr_mask       = MMC_VDD_32_33|MMC_VDD_33_34,
217         .init           = tosa_mci_init,
218         .get_ro         = tosa_mci_get_ro,
219         .setpower       = tosa_mci_setpower,
220         .exit           = tosa_mci_exit,
221 };
222
223 /*
224  * Irda
225  */
226 static void tosa_irda_transceiver_mode(struct device *dev, int mode)
227 {
228         if (mode & IR_OFF) {
229                 reset_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_IR_POWERDWN);
230                 pxa_gpio_mode(GPIO47_STTXD|GPIO_DFLT_LOW);
231                 pxa_gpio_mode(GPIO47_STTXD|GPIO_OUT);
232         } else {
233                 pxa_gpio_mode(GPIO47_STTXD_MD);
234                 set_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_IR_POWERDWN);
235         }
236 }
237
238 static struct pxaficp_platform_data tosa_ficp_platform_data = {
239         .transceiver_cap  = IR_SIRMODE | IR_OFF,
240         .transceiver_mode = tosa_irda_transceiver_mode,
241 };
242
243 /*
244  * Tosa Keyboard
245  */
246 static struct platform_device tosakbd_device = {
247         .name           = "tosa-keyboard",
248         .id             = -1,
249 };
250
251 static struct gpio_keys_button tosa_gpio_keys[] = {
252         {
253                 .type   = EV_PWR,
254                 .code   = KEY_SUSPEND,
255                 .gpio   = TOSA_GPIO_ON_KEY,
256                 .desc   = "On key",
257                 .wakeup = 1,
258                 .active_low = 1,
259         },
260         {
261                 .type   = EV_KEY,
262                 .code   = TOSA_KEY_RECORD,
263                 .gpio   = TOSA_GPIO_RECORD_BTN,
264                 .desc   = "Record Button",
265                 .wakeup = 1,
266                 .active_low = 1,
267         },
268         {
269                 .type   = EV_KEY,
270                 .code   = TOSA_KEY_SYNC,
271                 .gpio   = TOSA_GPIO_SYNC,
272                 .desc   = "Sync Button",
273                 .wakeup = 1,
274                 .active_low = 1,
275         },
276 };
277
278 static struct gpio_keys_platform_data tosa_gpio_keys_platform_data = {
279         .buttons        = tosa_gpio_keys,
280         .nbuttons       = ARRAY_SIZE(tosa_gpio_keys),
281 };
282
283 static struct platform_device tosa_gpio_keys_device = {
284         .name   = "gpio-keys",
285         .id     = -1,
286         .dev    = {
287                 .platform_data  = &tosa_gpio_keys_platform_data,
288         },
289 };
290
291 /*
292  * Tosa LEDs
293  */
294 static struct platform_device tosaled_device = {
295     .name   = "tosa-led",
296     .id     = -1,
297 };
298
299 static struct platform_device *devices[] __initdata = {
300         &tosascoop_device,
301         &tosascoop_jc_device,
302         &tosakbd_device,
303         &tosa_gpio_keys_device,
304         &tosaled_device,
305 };
306
307 static void tosa_poweroff(void)
308 {
309         RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
310
311         pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_OUT);
312         GPSR(TOSA_GPIO_ON_RESET) = GPIO_bit(TOSA_GPIO_ON_RESET);
313
314         mdelay(1000);
315         arm_machine_restart('h');
316 }
317
318 static void tosa_restart(char mode)
319 {
320         /* Bootloader magic for a reboot */
321         if((MSC0 & 0xffff0000) == 0x7ff00000)
322                 MSC0 = (MSC0 & 0xffff) | 0x7ee00000;
323
324         tosa_poweroff();
325 }
326
327 static void __init tosa_init(void)
328 {
329         pm_power_off = tosa_poweroff;
330         arm_pm_restart = tosa_restart;
331
332         pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_IN);
333         pxa_gpio_mode(TOSA_GPIO_TC6393_INT | GPIO_IN);
334         pxa_gpio_mode(TOSA_GPIO_USB_IN | GPIO_IN);
335
336         /* setup sleep mode values */
337         PWER  = 0x00000002;
338         PFER  = 0x00000000;
339         PRER  = 0x00000002;
340         PGSR0 = 0x00000000;
341         PGSR1 = 0x00FF0002;
342         PGSR2 = 0x00014000;
343         PCFR |= PCFR_OPDE;
344
345         /* enable batt_fault */
346         PMCR = 0x01;
347
348         pxa_set_mci_info(&tosa_mci_platform_data);
349         pxa_set_udc_info(&udc_info);
350         pxa_set_ficp_info(&tosa_ficp_platform_data);
351         platform_scoop_config = &tosa_pcmcia_config;
352
353         platform_add_devices(devices, ARRAY_SIZE(devices));
354 }
355
356 static void __init fixup_tosa(struct machine_desc *desc,
357                 struct tag *tags, char **cmdline, struct meminfo *mi)
358 {
359         sharpsl_save_param();
360         mi->nr_banks=1;
361         mi->bank[0].start = 0xa0000000;
362         mi->bank[0].node = 0;
363         mi->bank[0].size = (64*1024*1024);
364 }
365
366 MACHINE_START(TOSA, "SHARP Tosa")
367         .phys_io        = 0x40000000,
368         .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
369         .fixup          = fixup_tosa,
370         .map_io         = pxa_map_io,
371         .init_irq       = pxa25x_init_irq,
372         .init_machine   = tosa_init,
373         .timer          = &pxa_timer,
374 MACHINE_END