arch/arm/mach-pxa/eseries.c

   1 /*
   2  * Hardware definitions for the Toshiba eseries PDAs
   3  *
   4  * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
   5  *
   6  * This file is licensed under
   7  * the terms of the GNU General Public License version 2. This program
   8  * is licensed "as is" without any warranty of any kind, whether express
   9  * or implied.
  10  *
  11  */
  12
  13 #include <linux/kernel.h>
  14 #include <linux/init.h>
  15 #include <linux/gpio.h>
  16 #include <linux/delay.h>
  17 #include <linux/platform_device.h>
  18 #include <linux/mfd/tc6387xb.h>
  19 #include <linux/mfd/tc6393xb.h>
  20 #include <linux/mfd/t7l66xb.h>
  21 #include <linux/mtd/nand.h>
  22 #include <linux/mtd/partitions.h>
  23 #include <linux/usb/gpio_vbus.h>
  24
  25 #include <video/w100fb.h>
  26
  27 #include <asm/setup.h>
  28 #include <asm/mach/arch.h>
  29 #include <asm/mach-types.h>
  30
  31 #include <mach/pxa25x.h>
  32 #include <mach/eseries-gpio.h>
  33 #include <mach/eseries-irq.h>
  34 #include <mach/audio.h>
  35 #include <linux/platform_data/video-pxafb.h>
  36 #include <mach/udc.h>
  37 #include <linux/platform_data/irda-pxaficp.h>
  38
  39 #include "devices.h"
  40 #include "generic.h"
  41 #include "clock.h"
  42
  43 /* Only e800 has 128MB RAM */
  44 void __init eseries_fixup(struct tag *tags, char **cmdline, struct meminfo *mi)
  45 {
  46         mi->nr_banks=1;
  47         mi->bank[0].start = 0xa0000000;
  48         if (machine_is_e800())
  49                 mi->bank[0].size = (128*1024*1024);
  50         else
  51                 mi->bank[0].size = (64*1024*1024);
  52 }
  53
  54 struct gpio_vbus_mach_info e7xx_udc_info = {
  55         .gpio_vbus   = GPIO_E7XX_USB_DISC,
  56         .gpio_pullup = GPIO_E7XX_USB_PULLUP,
  57         .gpio_pullup_inverted = 1
  58 };
  59
  60 static struct platform_device e7xx_gpio_vbus = {
  61         .name   = "gpio-vbus",
  62         .id     = -1,
  63         .dev    = {
  64                 .platform_data  = &e7xx_udc_info,
  65         },
  66 };
  67
  68 struct pxaficp_platform_data e7xx_ficp_platform_data = {
  69         .gpio_pwdown            = GPIO_E7XX_IR_OFF,
  70         .transceiver_cap        = IR_SIRMODE | IR_OFF,
  71 };
  72
  73 int eseries_tmio_enable(struct platform_device *dev)
  74 {
  75         /* Reset - bring SUSPEND high before PCLR */
  76         gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
  77         gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 0);
  78         msleep(1);
  79         gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 1);
  80         msleep(1);
  81         gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 1);
  82         msleep(1);
  83         return 0;
  84 }
  85
  86 int eseries_tmio_disable(struct platform_device *dev)
  87 {
  88         gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
  89         gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 0);
  90         return 0;
  91 }
  92
  93 int eseries_tmio_suspend(struct platform_device *dev)
  94 {
  95         gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
  96         return 0;
  97 }
  98
  99 int eseries_tmio_resume(struct platform_device *dev)
 100 {
 101         gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 1);
 102         msleep(1);
 103         return 0;
 104 }
 105
 106 void eseries_get_tmio_gpios(void)
 107 {
 108         gpio_request(GPIO_ESERIES_TMIO_SUSPEND, NULL);
 109         gpio_request(GPIO_ESERIES_TMIO_PCLR, NULL);
 110         gpio_direction_output(GPIO_ESERIES_TMIO_SUSPEND, 0);
 111         gpio_direction_output(GPIO_ESERIES_TMIO_PCLR, 0);
 112 }
 113
 114 /* TMIO controller uses the same resources on all e-series machines. */
 115 struct resource eseries_tmio_resources[] = {
 116         [0] = {
 117                 .start  = PXA_CS4_PHYS,
 118                 .end    = PXA_CS4_PHYS + 0x1fffff,
 119                 .flags  = IORESOURCE_MEM,
 120         },
 121         [1] = {
 122                 .start  = PXA_GPIO_TO_IRQ(GPIO_ESERIES_TMIO_IRQ),
 123                 .end    = PXA_GPIO_TO_IRQ(GPIO_ESERIES_TMIO_IRQ),
 124                 .flags  = IORESOURCE_IRQ,
 125         },
 126 };
 127
 128 /* Some e-series hardware cannot control the 32K clock */
 129 static void clk_32k_dummy(struct clk *clk)
 130 {
 131 }
 132
 133 static const struct clkops clk_32k_dummy_ops = {
 134         .enable         = clk_32k_dummy,
 135         .disable        = clk_32k_dummy,
 136 };
 137
 138 static struct clk tmio_dummy_clk = {
 139         .ops    = &clk_32k_dummy_ops,
 140         .rate   = 32768,
 141 };
 142
 143 static struct clk_lookup eseries_clkregs[] = {
 144         INIT_CLKREG(&tmio_dummy_clk, NULL, "CLK_CK32K"),
 145 };
 146
 147 static void __init eseries_register_clks(void)
 148 {
 149         clkdev_add_table(eseries_clkregs, ARRAY_SIZE(eseries_clkregs));
 150 }
 151
 152 #ifdef CONFIG_MACH_E330
 153 /* -------------------- e330 tc6387xb parameters -------------------- */
 154
 155 static struct tc6387xb_platform_data e330_tc6387xb_info = {
 156         .enable   = &eseries_tmio_enable,
 157         .disable  = &eseries_tmio_disable,
 158         .suspend  = &eseries_tmio_suspend,
 159         .resume   = &eseries_tmio_resume,
 160 };
 161
 162 static struct platform_device e330_tc6387xb_device = {
 163         .name           = "tc6387xb",
 164         .id             = -1,
 165         .dev            = {
 166                 .platform_data = &e330_tc6387xb_info,
 167         },
 168         .num_resources = 2,
 169         .resource      = eseries_tmio_resources,
 170 };
 171
 172 /* --------------------------------------------------------------- */
 173
 174 static struct platform_device *e330_devices[] __initdata = {
 175         &e330_tc6387xb_device,
 176         &e7xx_gpio_vbus,
 177 };
 178
 179 static void __init e330_init(void)
 180 {
 181         pxa_set_ffuart_info(NULL);
 182         pxa_set_btuart_info(NULL);
 183         pxa_set_stuart_info(NULL);
 184         eseries_register_clks();
 185         eseries_get_tmio_gpios();
 186         platform_add_devices(ARRAY_AND_SIZE(e330_devices));
 187 }
 188
 189 MACHINE_START(E330, "Toshiba e330")
 190         /* Maintainer: Ian Molton (spyro@f2s.com) */
 191         .atag_offset    = 0x100,
 192         .map_io         = pxa25x_map_io,
 193         .nr_irqs        = ESERIES_NR_IRQS,
 194         .init_irq       = pxa25x_init_irq,
 195         .handle_irq     = pxa25x_handle_irq,
 196         .fixup          = eseries_fixup,
 197         .init_machine   = e330_init,
 198         .init_time      = pxa_timer_init,
 199         .restart        = pxa_restart,
 200 MACHINE_END
 201 #endif
 202
 203 #ifdef CONFIG_MACH_E350
 204 /* -------------------- e350 t7l66xb parameters -------------------- */
 205
 206 static struct t7l66xb_platform_data e350_t7l66xb_info = {
 207         .irq_base               = IRQ_BOARD_START,
 208         .enable                 = &eseries_tmio_enable,
 209         .suspend                = &eseries_tmio_suspend,
 210         .resume                 = &eseries_tmio_resume,
 211 };
 212
 213 static struct platform_device e350_t7l66xb_device = {
 214         .name           = "t7l66xb",
 215         .id             = -1,
 216         .dev            = {
 217                 .platform_data = &e350_t7l66xb_info,
 218         },
 219         .num_resources = 2,
 220         .resource      = eseries_tmio_resources,
 221 };
 222
 223 /* ---------------------------------------------------------- */
 224
 225 static struct platform_device *e350_devices[] __initdata = {
 226         &e350_t7l66xb_device,
 227         &e7xx_gpio_vbus,
 228 };
 229
 230 static void __init e350_init(void)
 231 {
 232         pxa_set_ffuart_info(NULL);
 233         pxa_set_btuart_info(NULL);
 234         pxa_set_stuart_info(NULL);
 235         eseries_register_clks();
 236         eseries_get_tmio_gpios();
 237         platform_add_devices(ARRAY_AND_SIZE(e350_devices));
 238 }
 239
 240 MACHINE_START(E350, "Toshiba e350")
 241         /* Maintainer: Ian Molton (spyro@f2s.com) */
 242         .atag_offset    = 0x100,
 243         .map_io         = pxa25x_map_io,
 244         .nr_irqs        = ESERIES_NR_IRQS,
 245         .init_irq       = pxa25x_init_irq,
 246         .handle_irq     = pxa25x_handle_irq,
 247         .fixup          = eseries_fixup,
 248         .init_machine   = e350_init,
 249         .init_time      = pxa_timer_init,
 250         .restart        = pxa_restart,
 251 MACHINE_END
 252 #endif
 253
 254 #ifdef CONFIG_MACH_E400
 255 /* ------------------------ E400 LCD definitions ------------------------ */
 256
 257 static struct pxafb_mode_info e400_pxafb_mode_info = {
 258         .pixclock       = 140703,
 259         .xres           = 240,
 260         .yres           = 320,
 261         .bpp            = 16,
 262         .hsync_len      = 4,
 263         .left_margin    = 28,
 264         .right_margin   = 8,
 265         .vsync_len      = 3,
 266         .upper_margin   = 5,
 267         .lower_margin   = 6,
 268         .sync           = 0,
 269 };
 270
 271 static struct pxafb_mach_info e400_pxafb_mach_info = {
 272         .modes          = &e400_pxafb_mode_info,
 273         .num_modes      = 1,
 274         .lcd_conn       = LCD_COLOR_TFT_16BPP,
 275         .lccr3          = 0,
 276         .pxafb_backlight_power  = NULL,
 277 };
 278
 279 /* ------------------------ E400 MFP config ----------------------------- */
 280
 281 static unsigned long e400_pin_config[] __initdata = {
 282         /* Chip selects */
 283         GPIO15_nCS_1,   /* CS1 - Flash */
 284         GPIO80_nCS_4,   /* CS4 - TMIO */
 285
 286         /* Clocks */
 287         GPIO12_32KHz,
 288
 289         /* BTUART */
 290         GPIO42_BTUART_RXD,
 291         GPIO43_BTUART_TXD,
 292         GPIO44_BTUART_CTS,
 293
 294         /* TMIO controller */
 295         GPIO19_GPIO, /* t7l66xb #PCLR */
 296         GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
 297
 298         /* wakeup */
 299         GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
 300 };
 301
 302 /* ---------------------------------------------------------------------- */
 303
 304 static struct mtd_partition partition_a = {
 305         .name = "Internal NAND flash",
 306         .offset =  0,
 307         .size =  MTDPART_SIZ_FULL,
 308 };
 309
 310 static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
 311
 312 static struct nand_bbt_descr e400_t7l66xb_nand_bbt = {
 313         .options = 0,
 314         .offs = 4,
 315         .len = 2,
 316         .pattern = scan_ff_pattern
 317 };
 318
 319 static struct tmio_nand_data e400_t7l66xb_nand_config = {
 320         .num_partitions = 1,
 321         .partition = &partition_a,
 322         .badblock_pattern = &e400_t7l66xb_nand_bbt,
 323 };
 324
 325 static struct t7l66xb_platform_data e400_t7l66xb_info = {
 326         .irq_base               = IRQ_BOARD_START,
 327         .enable                 = &eseries_tmio_enable,
 328         .suspend                = &eseries_tmio_suspend,
 329         .resume                 = &eseries_tmio_resume,
 330
 331         .nand_data              = &e400_t7l66xb_nand_config,
 332 };
 333
 334 static struct platform_device e400_t7l66xb_device = {
 335         .name           = "t7l66xb",
 336         .id             = -1,
 337         .dev            = {
 338                 .platform_data = &e400_t7l66xb_info,
 339         },
 340         .num_resources = 2,
 341         .resource      = eseries_tmio_resources,
 342 };
 343
 344 /* ---------------------------------------------------------- */
 345
 346 static struct platform_device *e400_devices[] __initdata = {
 347         &e400_t7l66xb_device,
 348         &e7xx_gpio_vbus,
 349 };
 350
 351 static void __init e400_init(void)
 352 {
 353         pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
 354         pxa_set_ffuart_info(NULL);
 355         pxa_set_btuart_info(NULL);
 356         pxa_set_stuart_info(NULL);
 357         /* Fixme - e400 may have a switched clock */
 358         eseries_register_clks();
 359         eseries_get_tmio_gpios();
 360         pxa_set_fb_info(NULL, &e400_pxafb_mach_info);
 361         platform_add_devices(ARRAY_AND_SIZE(e400_devices));
 362 }
 363
 364 MACHINE_START(E400, "Toshiba e400")
 365         /* Maintainer: Ian Molton (spyro@f2s.com) */
 366         .atag_offset    = 0x100,
 367         .map_io         = pxa25x_map_io,
 368         .nr_irqs        = ESERIES_NR_IRQS,
 369         .init_irq       = pxa25x_init_irq,
 370         .handle_irq     = pxa25x_handle_irq,
 371         .fixup          = eseries_fixup,
 372         .init_machine   = e400_init,
 373         .init_time      = pxa_timer_init,
 374         .restart        = pxa_restart,
 375 MACHINE_END
 376 #endif
 377
 378 #ifdef CONFIG_MACH_E740
 379 /* ------------------------ e740 video support --------------------------- */
 380
 381 static struct w100_gen_regs e740_lcd_regs = {
 382         .lcd_format =            0x00008023,
 383         .lcdd_cntl1 =            0x0f000000,
 384         .lcdd_cntl2 =            0x0003ffff,
 385         .genlcd_cntl1 =          0x00ffff03,
 386         .genlcd_cntl2 =          0x003c0f03,
 387         .genlcd_cntl3 =          0x000143aa,
 388 };
 389
 390 static struct w100_mode e740_lcd_mode = {
 391         .xres            = 240,
 392         .yres            = 320,
 393         .left_margin     = 20,
 394         .right_margin    = 28,
 395         .upper_margin    = 9,
 396         .lower_margin    = 8,
 397         .crtc_ss         = 0x80140013,
 398         .crtc_ls         = 0x81150110,
 399         .crtc_gs         = 0x80050005,
 400         .crtc_vpos_gs    = 0x000a0009,
 401         .crtc_rev        = 0x0040010a,
 402         .crtc_dclk       = 0xa906000a,
 403         .crtc_gclk       = 0x80050108,
 404         .crtc_goe        = 0x80050108,
 405         .pll_freq        = 57,
 406         .pixclk_divider         = 4,
 407         .pixclk_divider_rotated = 4,
 408         .pixclk_src     = CLK_SRC_XTAL,
 409         .sysclk_divider  = 1,
 410         .sysclk_src     = CLK_SRC_PLL,
 411         .crtc_ps1_active =       0x41060010,
 412 };
 413
 414 static struct w100_gpio_regs e740_w100_gpio_info = {
 415         .init_data1 = 0x21002103,
 416         .gpio_dir1  = 0xffffdeff,
 417         .gpio_oe1   = 0x03c00643,
 418         .init_data2 = 0x003f003f,
 419         .gpio_dir2  = 0xffffffff,
 420         .gpio_oe2   = 0x000000ff,
 421 };
 422
 423 static struct w100fb_mach_info e740_fb_info = {
 424         .modelist   = &e740_lcd_mode,
 425         .num_modes  = 1,
 426         .regs       = &e740_lcd_regs,
 427         .gpio       = &e740_w100_gpio_info,
 428         .xtal_freq = 14318000,
 429         .xtal_dbl   = 1,
 430 };
 431
 432 static struct resource e740_fb_resources[] = {
 433         [0] = {
 434                 .start          = 0x0c000000,
 435                 .end            = 0x0cffffff,
 436                 .flags          = IORESOURCE_MEM,
 437         },
 438 };
 439
 440 static struct platform_device e740_fb_device = {
 441         .name           = "w100fb",
 442         .id             = -1,
 443         .dev            = {
 444                 .platform_data  = &e740_fb_info,
 445         },
 446         .num_resources  = ARRAY_SIZE(e740_fb_resources),
 447         .resource       = e740_fb_resources,
 448 };
 449
 450 /* --------------------------- MFP Pin config -------------------------- */
 451
 452 static unsigned long e740_pin_config[] __initdata = {
 453         /* Chip selects */
 454         GPIO15_nCS_1,   /* CS1 - Flash */
 455         GPIO79_nCS_3,   /* CS3 - IMAGEON */
 456         GPIO80_nCS_4,   /* CS4 - TMIO */
 457
 458         /* Clocks */
 459         GPIO12_32KHz,
 460
 461         /* BTUART */
 462         GPIO42_BTUART_RXD,
 463         GPIO43_BTUART_TXD,
 464         GPIO44_BTUART_CTS,
 465
 466         /* TMIO controller */
 467         GPIO19_GPIO, /* t7l66xb #PCLR */
 468         GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
 469
 470         /* UDC */
 471         GPIO13_GPIO,
 472         GPIO3_GPIO,
 473
 474         /* IrDA */
 475         GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
 476
 477         /* AC97 */
 478         GPIO28_AC97_BITCLK,
 479         GPIO29_AC97_SDATA_IN_0,
 480         GPIO30_AC97_SDATA_OUT,
 481         GPIO31_AC97_SYNC,
 482
 483         /* Audio power control */
 484         GPIO16_GPIO,  /* AC97 codec AVDD2 supply (analogue power) */
 485         GPIO40_GPIO,  /* Mic amp power */
 486         GPIO41_GPIO,  /* Headphone amp power */
 487
 488         /* PC Card */
 489         GPIO8_GPIO,   /* CD0 */
 490         GPIO44_GPIO,  /* CD1 */
 491         GPIO11_GPIO,  /* IRQ0 */
 492         GPIO6_GPIO,   /* IRQ1 */
 493         GPIO27_GPIO,  /* RST0 */
 494         GPIO24_GPIO,  /* RST1 */
 495         GPIO20_GPIO,  /* PWR0 */
 496         GPIO23_GPIO,  /* PWR1 */
 497         GPIO48_nPOE,
 498         GPIO49_nPWE,
 499         GPIO50_nPIOR,
 500         GPIO51_nPIOW,
 501         GPIO52_nPCE_1,
 502         GPIO53_nPCE_2,
 503         GPIO54_nPSKTSEL,
 504         GPIO55_nPREG,
 505         GPIO56_nPWAIT,
 506         GPIO57_nIOIS16,
 507
 508         /* wakeup */
 509         GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
 510 };
 511
 512 /* -------------------- e740 t7l66xb parameters -------------------- */
 513
 514 static struct t7l66xb_platform_data e740_t7l66xb_info = {
 515         .irq_base               = IRQ_BOARD_START,
 516         .enable                 = &eseries_tmio_enable,
 517         .suspend                = &eseries_tmio_suspend,
 518         .resume                 = &eseries_tmio_resume,
 519 };
 520
 521 static struct platform_device e740_t7l66xb_device = {
 522         .name           = "t7l66xb",
 523         .id             = -1,
 524         .dev            = {
 525                 .platform_data = &e740_t7l66xb_info,
 526         },
 527         .num_resources = 2,
 528         .resource      = eseries_tmio_resources,
 529 };
 530
 531 static struct platform_device e740_audio_device = {
 532         .name           = "e740-audio",
 533         .id             = -1,
 534 };
 535
 536 /* ----------------------------------------------------------------------- */
 537
 538 static struct platform_device *e740_devices[] __initdata = {
 539         &e740_fb_device,
 540         &e740_t7l66xb_device,
 541         &e7xx_gpio_vbus,
 542         &e740_audio_device,
 543 };
 544
 545 static void __init e740_init(void)
 546 {
 547         pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
 548         pxa_set_ffuart_info(NULL);
 549         pxa_set_btuart_info(NULL);
 550         pxa_set_stuart_info(NULL);
 551         eseries_register_clks();
 552         clk_add_alias("CLK_CK48M", e740_t7l66xb_device.name,
 553                         "UDCCLK", &pxa25x_device_udc.dev),
 554         eseries_get_tmio_gpios();
 555         platform_add_devices(ARRAY_AND_SIZE(e740_devices));
 556         pxa_set_ac97_info(NULL);
 557         pxa_set_ficp_info(&e7xx_ficp_platform_data);
 558 }
 559
 560 MACHINE_START(E740, "Toshiba e740")
 561         /* Maintainer: Ian Molton (spyro@f2s.com) */
 562         .atag_offset    = 0x100,
 563         .map_io         = pxa25x_map_io,
 564         .nr_irqs        = ESERIES_NR_IRQS,
 565         .init_irq       = pxa25x_init_irq,
 566         .handle_irq     = pxa25x_handle_irq,
 567         .fixup          = eseries_fixup,
 568         .init_machine   = e740_init,
 569         .init_time      = pxa_timer_init,
 570         .restart        = pxa_restart,
 571 MACHINE_END
 572 #endif
 573
 574 #ifdef CONFIG_MACH_E750
 575 /* ---------------------- E750 LCD definitions -------------------- */
 576
 577 static struct w100_gen_regs e750_lcd_regs = {
 578         .lcd_format =            0x00008003,
 579         .lcdd_cntl1 =            0x00000000,
 580         .lcdd_cntl2 =            0x0003ffff,
 581         .genlcd_cntl1 =          0x00fff003,
 582         .genlcd_cntl2 =          0x003c0f03,
 583         .genlcd_cntl3 =          0x000143aa,
 584 };
 585
 586 static struct w100_mode e750_lcd_mode = {
 587         .xres            = 240,
 588         .yres            = 320,
 589         .left_margin     = 21,
 590         .right_margin    = 22,
 591         .upper_margin    = 5,
 592         .lower_margin    = 4,
 593         .crtc_ss         = 0x80150014,
 594         .crtc_ls         = 0x8014000d,
 595         .crtc_gs         = 0xc1000005,
 596         .crtc_vpos_gs    = 0x00020147,
 597         .crtc_rev        = 0x0040010a,
 598         .crtc_dclk       = 0xa1700030,
 599         .crtc_gclk       = 0x80cc0015,
 600         .crtc_goe        = 0x80cc0015,
 601         .crtc_ps1_active = 0x61060017,
 602         .pll_freq        = 57,
 603         .pixclk_divider         = 4,
 604         .pixclk_divider_rotated = 4,
 605         .pixclk_src     = CLK_SRC_XTAL,
 606         .sysclk_divider  = 1,
 607         .sysclk_src     = CLK_SRC_PLL,
 608 };
 609
 610 static struct w100_gpio_regs e750_w100_gpio_info = {
 611         .init_data1 = 0x01192f1b,
 612         .gpio_dir1  = 0xd5ffdeff,
 613         .gpio_oe1   = 0x000020bf,
 614         .init_data2 = 0x010f010f,
 615         .gpio_dir2  = 0xffffffff,
 616         .gpio_oe2   = 0x000001cf,
 617 };
 618
 619 static struct w100fb_mach_info e750_fb_info = {
 620         .modelist   = &e750_lcd_mode,
 621         .num_modes  = 1,
 622         .regs       = &e750_lcd_regs,
 623         .gpio       = &e750_w100_gpio_info,
 624         .xtal_freq  = 14318000,
 625         .xtal_dbl   = 1,
 626 };
 627
 628 static struct resource e750_fb_resources[] = {
 629         [0] = {
 630                 .start          = 0x0c000000,
 631                 .end            = 0x0cffffff,
 632                 .flags          = IORESOURCE_MEM,
 633         },
 634 };
 635
 636 static struct platform_device e750_fb_device = {
 637         .name           = "w100fb",
 638         .id             = -1,
 639         .dev            = {
 640                 .platform_data  = &e750_fb_info,
 641         },
 642         .num_resources  = ARRAY_SIZE(e750_fb_resources),
 643         .resource       = e750_fb_resources,
 644 };
 645
 646 /* -------------------- e750 MFP parameters -------------------- */
 647
 648 static unsigned long e750_pin_config[] __initdata = {
 649         /* Chip selects */
 650         GPIO15_nCS_1,   /* CS1 - Flash */
 651         GPIO79_nCS_3,   /* CS3 - IMAGEON */
 652         GPIO80_nCS_4,   /* CS4 - TMIO */
 653
 654         /* Clocks */
 655         GPIO11_3_6MHz,
 656
 657         /* BTUART */
 658         GPIO42_BTUART_RXD,
 659         GPIO43_BTUART_TXD,
 660         GPIO44_BTUART_CTS,
 661
 662         /* TMIO controller */
 663         GPIO19_GPIO, /* t7l66xb #PCLR */
 664         GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
 665
 666         /* UDC */
 667         GPIO13_GPIO,
 668         GPIO3_GPIO,
 669
 670         /* IrDA */
 671         GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
 672
 673         /* AC97 */
 674         GPIO28_AC97_BITCLK,
 675         GPIO29_AC97_SDATA_IN_0,
 676         GPIO30_AC97_SDATA_OUT,
 677         GPIO31_AC97_SYNC,
 678
 679         /* Audio power control */
 680         GPIO4_GPIO,  /* Headphone amp power */
 681         GPIO7_GPIO,  /* Speaker amp power */
 682         GPIO37_GPIO, /* Headphone detect */
 683
 684         /* PC Card */
 685         GPIO8_GPIO,   /* CD0 */
 686         GPIO44_GPIO,  /* CD1 */
 687         GPIO11_GPIO,  /* IRQ0 */
 688         GPIO6_GPIO,   /* IRQ1 */
 689         GPIO27_GPIO,  /* RST0 */
 690         GPIO24_GPIO,  /* RST1 */
 691         GPIO20_GPIO,  /* PWR0 */
 692         GPIO23_GPIO,  /* PWR1 */
 693         GPIO48_nPOE,
 694         GPIO49_nPWE,
 695         GPIO50_nPIOR,
 696         GPIO51_nPIOW,
 697         GPIO52_nPCE_1,
 698         GPIO53_nPCE_2,
 699         GPIO54_nPSKTSEL,
 700         GPIO55_nPREG,
 701         GPIO56_nPWAIT,
 702         GPIO57_nIOIS16,
 703
 704         /* wakeup */
 705         GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
 706 };
 707
 708 /* ----------------- e750 tc6393xb parameters ------------------ */
 709
 710 static struct tc6393xb_platform_data e750_tc6393xb_info = {
 711         .irq_base       = IRQ_BOARD_START,
 712         .scr_pll2cr     = 0x0cc1,
 713         .scr_gper       = 0,
 714         .gpio_base      = -1,
 715         .suspend        = &eseries_tmio_suspend,
 716         .resume         = &eseries_tmio_resume,
 717         .enable         = &eseries_tmio_enable,
 718         .disable        = &eseries_tmio_disable,
 719 };
 720
 721 static struct platform_device e750_tc6393xb_device = {
 722         .name           = "tc6393xb",
 723         .id             = -1,
 724         .dev            = {
 725                 .platform_data = &e750_tc6393xb_info,
 726         },
 727         .num_resources = 2,
 728         .resource      = eseries_tmio_resources,
 729 };
 730
 731 static struct platform_device e750_audio_device = {
 732         .name           = "e750-audio",
 733         .id             = -1,
 734 };
 735
 736 /* ------------------------------------------------------------- */
 737
 738 static struct platform_device *e750_devices[] __initdata = {
 739         &e750_fb_device,
 740         &e750_tc6393xb_device,
 741         &e7xx_gpio_vbus,
 742         &e750_audio_device,
 743 };
 744
 745 static void __init e750_init(void)
 746 {
 747         pxa2xx_mfp_config(ARRAY_AND_SIZE(e750_pin_config));
 748         pxa_set_ffuart_info(NULL);
 749         pxa_set_btuart_info(NULL);
 750         pxa_set_stuart_info(NULL);
 751         clk_add_alias("CLK_CK3P6MI", e750_tc6393xb_device.name,
 752                         "GPIO11_CLK", NULL),
 753         eseries_get_tmio_gpios();
 754         platform_add_devices(ARRAY_AND_SIZE(e750_devices));
 755         pxa_set_ac97_info(NULL);
 756         pxa_set_ficp_info(&e7xx_ficp_platform_data);
 757 }
 758
 759 MACHINE_START(E750, "Toshiba e750")
 760         /* Maintainer: Ian Molton (spyro@f2s.com) */
 761         .atag_offset    = 0x100,
 762         .map_io         = pxa25x_map_io,
 763         .nr_irqs        = ESERIES_NR_IRQS,
 764         .init_irq       = pxa25x_init_irq,
 765         .handle_irq     = pxa25x_handle_irq,
 766         .fixup          = eseries_fixup,
 767         .init_machine   = e750_init,
 768         .init_time      = pxa_timer_init,
 769         .restart        = pxa_restart,
 770 MACHINE_END
 771 #endif
 772
 773 #ifdef CONFIG_MACH_E800
 774 /* ------------------------ e800 LCD definitions ------------------------- */
 775
 776 static unsigned long e800_pin_config[] __initdata = {
 777         /* AC97 */
 778         GPIO28_AC97_BITCLK,
 779         GPIO29_AC97_SDATA_IN_0,
 780         GPIO30_AC97_SDATA_OUT,
 781         GPIO31_AC97_SYNC,
 782 };
 783
 784 static struct w100_gen_regs e800_lcd_regs = {
 785         .lcd_format =            0x00008003,
 786         .lcdd_cntl1 =            0x02a00000,
 787         .lcdd_cntl2 =            0x0003ffff,
 788         .genlcd_cntl1 =          0x000ff2a3,
 789         .genlcd_cntl2 =          0x000002a3,
 790         .genlcd_cntl3 =          0x000102aa,
 791 };
 792
 793 static struct w100_mode e800_lcd_mode[2] = {
 794         [0] = {
 795                 .xres            = 480,
 796                 .yres            = 640,
 797                 .left_margin     = 52,
 798                 .right_margin    = 148,
 799                 .upper_margin    = 2,
 800                 .lower_margin    = 6,
 801                 .crtc_ss         = 0x80350034,
 802                 .crtc_ls         = 0x802b0026,
 803                 .crtc_gs         = 0x80160016,
 804                 .crtc_vpos_gs    = 0x00020003,
 805                 .crtc_rev        = 0x0040001d,
 806                 .crtc_dclk       = 0xe0000000,
 807                 .crtc_gclk       = 0x82a50049,
 808                 .crtc_goe        = 0x80ee001c,
 809                 .crtc_ps1_active = 0x00000000,
 810                 .pll_freq        = 128,
 811                 .pixclk_divider         = 4,
 812                 .pixclk_divider_rotated = 6,
 813                 .pixclk_src     = CLK_SRC_PLL,
 814                 .sysclk_divider  = 0,
 815                 .sysclk_src     = CLK_SRC_PLL,
 816         },
 817         [1] = {
 818                 .xres            = 240,
 819                 .yres            = 320,
 820                 .left_margin     = 15,
 821                 .right_margin    = 88,
 822                 .upper_margin    = 0,
 823                 .lower_margin    = 7,
 824                 .crtc_ss         = 0xd010000f,
 825                 .crtc_ls         = 0x80070003,
 826                 .crtc_gs         = 0x80000000,
 827                 .crtc_vpos_gs    = 0x01460147,
 828                 .crtc_rev        = 0x00400003,
 829                 .crtc_dclk       = 0xa1700030,
 830                 .crtc_gclk       = 0x814b0008,
 831                 .crtc_goe        = 0x80cc0015,
 832                 .crtc_ps1_active = 0x00000000,
 833                 .pll_freq        = 100,
 834                 .pixclk_divider         = 6, /* Wince uses 14 which gives a */
 835                 .pixclk_divider_rotated = 6, /* 7MHz Pclk. We use a 14MHz one */
 836                 .pixclk_src     = CLK_SRC_PLL,
 837                 .sysclk_divider  = 0,
 838                 .sysclk_src     = CLK_SRC_PLL,
 839         }
 840 };
 841
 842
 843 static struct w100_gpio_regs e800_w100_gpio_info = {
 844         .init_data1 = 0xc13fc019,
 845         .gpio_dir1  = 0x3e40df7f,
 846         .gpio_oe1   = 0x003c3000,
 847         .init_data2 = 0x00000000,
 848         .gpio_dir2  = 0x00000000,
 849         .gpio_oe2   = 0x00000000,
 850 };
 851
 852 static struct w100_mem_info e800_w100_mem_info = {
 853         .ext_cntl        = 0x09640011,
 854         .sdram_mode_reg  = 0x00600021,
 855         .ext_timing_cntl = 0x10001545,
 856         .io_cntl         = 0x7ddd7333,
 857         .size            = 0x1fffff,
 858 };
 859
 860 static void e800_tg_change(struct w100fb_par *par)
 861 {
 862         unsigned long tmp;
 863
 864         tmp = w100fb_gpio_read(W100_GPIO_PORT_A);
 865         if (par->mode->xres == 480)
 866                 tmp |= 0x100;
 867         else
 868                 tmp &= ~0x100;
 869         w100fb_gpio_write(W100_GPIO_PORT_A, tmp);
 870 }
 871
 872 static struct w100_tg_info e800_tg_info = {
 873         .change = e800_tg_change,
 874 };
 875
 876 static struct w100fb_mach_info e800_fb_info = {
 877         .modelist   = e800_lcd_mode,
 878         .num_modes  = 2,
 879         .regs       = &e800_lcd_regs,
 880         .gpio       = &e800_w100_gpio_info,
 881         .mem        = &e800_w100_mem_info,
 882         .tg         = &e800_tg_info,
 883         .xtal_freq  = 16000000,
 884 };
 885
 886 static struct resource e800_fb_resources[] = {
 887         [0] = {
 888                 .start          = 0x0c000000,
 889                 .end            = 0x0cffffff,
 890                 .flags          = IORESOURCE_MEM,
 891         },
 892 };
 893
 894 static struct platform_device e800_fb_device = {
 895         .name           = "w100fb",
 896         .id             = -1,
 897         .dev            = {
 898                 .platform_data  = &e800_fb_info,
 899         },
 900         .num_resources  = ARRAY_SIZE(e800_fb_resources),
 901         .resource       = e800_fb_resources,
 902 };
 903
 904 /* --------------------------- UDC definitions --------------------------- */
 905
 906 static struct gpio_vbus_mach_info e800_udc_info = {
 907         .gpio_vbus   = GPIO_E800_USB_DISC,
 908         .gpio_pullup = GPIO_E800_USB_PULLUP,
 909         .gpio_pullup_inverted = 1
 910 };
 911
 912 static struct platform_device e800_gpio_vbus = {
 913         .name   = "gpio-vbus",
 914         .id     = -1,
 915         .dev    = {
 916                 .platform_data  = &e800_udc_info,
 917         },
 918 };
 919
 920
 921 /* ----------------- e800 tc6393xb parameters ------------------ */
 922
 923 static struct tc6393xb_platform_data e800_tc6393xb_info = {
 924         .irq_base       = IRQ_BOARD_START,
 925         .scr_pll2cr     = 0x0cc1,
 926         .scr_gper       = 0,
 927         .gpio_base      = -1,
 928         .suspend        = &eseries_tmio_suspend,
 929         .resume         = &eseries_tmio_resume,
 930         .enable         = &eseries_tmio_enable,
 931         .disable        = &eseries_tmio_disable,
 932 };
 933
 934 static struct platform_device e800_tc6393xb_device = {
 935         .name           = "tc6393xb",
 936         .id             = -1,
 937         .dev            = {
 938                 .platform_data = &e800_tc6393xb_info,
 939         },
 940         .num_resources = 2,
 941         .resource      = eseries_tmio_resources,
 942 };
 943
 944 static struct platform_device e800_audio_device = {
 945         .name           = "e800-audio",
 946         .id             = -1,
 947 };
 948
 949 /* ----------------------------------------------------------------------- */
 950
 951 static struct platform_device *e800_devices[] __initdata = {
 952         &e800_fb_device,
 953         &e800_tc6393xb_device,
 954         &e800_gpio_vbus,
 955         &e800_audio_device,
 956 };
 957
 958 static void __init e800_init(void)
 959 {
 960         pxa2xx_mfp_config(ARRAY_AND_SIZE(e800_pin_config));
 961         pxa_set_ffuart_info(NULL);
 962         pxa_set_btuart_info(NULL);
 963         pxa_set_stuart_info(NULL);
 964         clk_add_alias("CLK_CK3P6MI", e800_tc6393xb_device.name,
 965                         "GPIO11_CLK", NULL),
 966         eseries_get_tmio_gpios();
 967         platform_add_devices(ARRAY_AND_SIZE(e800_devices));
 968         pxa_set_ac97_info(NULL);
 969 }
 970
 971 MACHINE_START(E800, "Toshiba e800")
 972         /* Maintainer: Ian Molton (spyro@f2s.com) */
 973         .atag_offset    = 0x100,
 974         .map_io         = pxa25x_map_io,
 975         .nr_irqs        = ESERIES_NR_IRQS,
 976         .init_irq       = pxa25x_init_irq,
 977         .handle_irq     = pxa25x_handle_irq,
 978         .fixup          = eseries_fixup,
 979         .init_machine   = e800_init,
 980         .init_time      = pxa_timer_init,
 981         .restart        = pxa_restart,
 982 MACHINE_END
 983 #endif