3 menu "Intel PXA2xx/PXA3xx Implementations"
5 comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
8 bool "Support PXA25x platforms from device tree"
14 Include support for Marvell PXA25x based platforms using
15 the device tree. Needn't select any other machine while
16 MACH_PXA25x_DT is enabled.
19 bool "Support PXA27x platforms from device tree"
25 Include support for Marvell PXA27x based platforms using
26 the device tree. Needn't select any other machine while
27 MACH_PXA27X_DT is enabled.
30 bool "Support PXA3xx platforms from device tree"
37 Include support for Marvell PXA3xx based platforms using
38 the device tree. Needn't select any other machine while
39 MACH_PXA3XX_DT is enabled.
42 bool "Intel DBPXA250 Development Platform (aka Lubbock)"
48 bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
56 config MACH_ZYLONITE300
57 bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
62 config MACH_ZYLONITE320
63 bool "PXA3xx Development Platform (aka Zylonite) PXA320"
68 bool "PXA3xx Form Factor Platform (aka Littleton)"
74 bool "PXA930 Evaluation Board (aka TavorEVB)"
82 bool "PXA930 Handheld Platform (aka SAAR)"
89 comment "Third Party Dev Platforms (sorted by vendor name)"
92 bool "Accelent Xscale IDP"
96 bool "Arcom/Eurotech VIPER SBC"
98 select I2C_GPIO if I2C=y
102 config MACH_ARCOM_ZEUS
103 bool "Arcom/Eurotech ZEUS SBC"
109 bool "Balloon 3 board"
114 bool "Enable Cogent CSB726 System On a Module"
118 Say Y here if you intend to run this kernel on a Cogent
119 CSB726 System On Module.
122 bool "Enable support for CSB701 baseboard"
123 depends on MACH_CSB726
126 bool "CompuLab CM-X255/CM-X270 modules"
127 select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI
130 select NEED_MACH_IO_H if PCI
135 bool "CompuLab EM-x270 platform"
139 bool "CompuLab eXeda platform"
143 bool "CompuLab CM-X300 modules"
149 bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM"
154 bool "Gumstix XScale 255 boards"
157 Say Y here if you intend to run this kernel on
158 Basix, Connex, ws-200ax, ws-400ax systems
161 prompt "Gumstix Carrier/Expansion Board"
162 depends on ARCH_GUMSTIX
164 config GUMSTIX_AM200EPD
165 bool "Enable AM200EPD board support"
167 config GUMSTIX_AM300EPD
168 bool "Enable AM300EPD board support"
172 config MACH_INTELMOTE2
173 bool "Intel Mote 2 Platform"
177 config MACH_STARGATE2
178 bool "Intel Stargate 2 Platform"
183 bool "Iskratel Electronics XCEP"
186 select MTD_CFI_INTELEXT
190 PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
191 Tuned for usage in Libera instruments for particle accelerators.
194 bool "PXA based Keith und Koep Trizeps DIMM-Modules"
197 bool "Keith und Koep Trizeps4 DIMM-Module"
198 depends on TRIZEPS_PXA
200 select TRIZEPS_PCMCIA
202 config MACH_TRIZEPS4WL
203 bool "Keith und Koep Trizeps4-WL DIMM-Module"
204 depends on TRIZEPS_PXA
207 select TRIZEPS_PCMCIA
210 prompt "Select base board for Trizeps module"
211 depends on TRIZEPS_PXA
213 config MACH_TRIZEPS_CONXS
214 bool "ConXS Eval Board"
216 config MACH_TRIZEPS_UCONXS
217 bool "uConXS Eval Board"
219 config MACH_TRIZEPS_ANY
227 Generic option for Arcom Viper/Zeus PCMCIA
229 config TRIZEPS_PCMCIA
232 Enable PCMCIA support for Trizeps modules
234 config MACH_LOGICPD_PXA270
235 bool "LogicPD PXA270 Card Engine Development Platform"
239 bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
243 config MACH_PCM990_BASEBOARD
244 bool "PHYTEC PCM-990 development board"
245 depends on MACH_PCM027
248 prompt "display on pcm990"
249 depends on MACH_PCM990_BASEBOARD
251 config PCM990_DISPLAY_SHARP
252 bool "sharp lq084v1dg21 stn display"
254 config PCM990_DISPLAY_NEC
255 bool "nec nl6448bc20_18d tft display"
257 config PCM990_DISPLAY_NONE
263 bool "Toradex Colibri PXA270"
266 config MACH_COLIBRI_PXA270_INCOME
267 bool "Income s.r.o. PXA270 SBC"
268 depends on MACH_COLIBRI
271 config MACH_COLIBRI300
272 bool "Toradex Colibri PXA300/310"
277 config MACH_COLIBRI320
278 bool "Toradex Colibri PXA320"
282 config MACH_COLIBRI_EVALBOARD
283 bool "Toradex Colibri Evaluation Carrier Board support"
284 depends on MACH_COLIBRI || MACH_COLIBRI300 || MACH_COLIBRI320
288 select HAVE_PATA_PLATFORM
291 PXA270 based Single Board Computer.
293 comment "End-user Products (sorted by vendor name)"
296 bool "HP iPAQ hx4700"
305 bool "HTC Himalaya Support"
309 bool "Enable HTC Magician Support"
314 bool "Mitac Mio A701 Support"
318 Say Y here if you intend to run this kernel on a
319 MIO A701. Currently there is only basic support
323 bool "Motorola EZX Platform"
328 bool "Motorola EZX A780"
333 bool "Motorola EZX E680"
337 config MACH_EZX_A1200
338 bool "Motorola EZX A1200"
343 bool "Motorola EZX A910"
348 bool "Motorola EZX E6"
353 bool "Motorola EZX E2"
358 bool "Nec Mobilepro 900/c"
362 bool "PXA based Palm PDAs"
368 bool "Palm Tungsten|E2"
370 depends on ARCH_PXA_PALM
373 Say Y here if you intend to run this kernel on a Palm Tungsten|E2
377 bool "Palm Tungsten|C"
379 depends on ARCH_PXA_PALM
382 Say Y here if you intend to run this kernel on a Palm Tungsten|C
386 bool "Palm Tungsten|T5"
388 depends on ARCH_PXA_PALM
393 Say Y here if you intend to run this kernel on a Palm Tungsten|T5
399 depends on ARCH_PXA_PALM
404 Say Y here if you intend to run this kernel on a Palm T|X
410 depends on ARCH_PXA_PALM
415 Say Y here if you intend to run this kernel on Palm Zire 72
419 bool "Palm LifeDrive"
421 depends on ARCH_PXA_PALM
426 Say Y here if you intend to run this kernel on a Palm LifeDrive
431 depends on ARCH_PXA_PALM
434 bool "Palm Centro 685 (GSM)"
436 depends on ARCH_PXA_PALM
442 Say Y here if you intend to run this kernel on Palm Centro 685 (GSM)
448 depends on ARCH_PXA_PALM
454 Say Y here if you intend to run this kernel on Palm Treo 680
458 bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
462 Say Y here if you intend to run this kernel on a
463 Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
464 SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),
465 SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
468 config PXA_SHARPSL_DETECT_MACH_ID
469 bool "Detect machine ID at run-time in the decompressor"
470 depends on PXA_SHARPSL
472 Say Y here if you want the zImage decompressor to detect
473 the Zaurus machine ID at run-time. For latest kexec-based
474 boot loader, this is not necessary.
477 bool "Enable Sharp SL-5600 (Poodle) Support"
478 depends on PXA_SHARPSL
483 bool "Enable Sharp SL-C700 (Corgi) Support"
484 depends on PXA_SHARPSL
486 select PXA_SHARP_C7xx
489 bool "Enable Sharp SL-C750 (Shepherd) Support"
490 depends on PXA_SHARPSL
492 select PXA_SHARP_C7xx
495 bool "Enable Sharp SL-C760 (Husky) Support"
496 depends on PXA_SHARPSL
498 select PXA_SHARP_C7xx
501 bool "Enable Sharp SL-1000 (Akita) Support"
502 depends on PXA_SHARPSL
507 select PXA_SHARP_Cxx00
510 bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
511 depends on PXA_SHARPSL
513 select PXA_SHARP_Cxx00
516 bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
517 depends on PXA_SHARPSL
519 select PXA_SHARP_Cxx00
522 bool "Enable Sharp SL-6000x (Tosa) Support"
523 depends on PXA_SHARPSL
527 tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
528 depends on MACH_TOSA && NET
531 This is a simple driver that is able to control
532 the state of built in bluetooth chip on tosa.
534 config TOSA_USE_EXT_KEYCODES
535 bool "Tosa keyboard: use extended keycodes"
538 Say Y here to enable the tosa keyboard driver to generate extended
539 (>= 127) keycodes. Be aware, that they can't be correctly interpreted
540 by either console keyboard driver or by Kdrive keybd driver.
542 Say Y only if you know, what you are doing!
545 bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM"
549 config ARCH_PXA_ESERIES
550 bool "PXA based Toshiba e-series PDAs"
558 depends on ARCH_PXA_ESERIES
560 Say Y here if you intend to run this kernel on a Toshiba
566 depends on ARCH_PXA_ESERIES
568 Say Y here if you intend to run this kernel on a Toshiba
574 depends on ARCH_PXA_ESERIES
576 Say Y here if you intend to run this kernel on a Toshiba
582 depends on ARCH_PXA_ESERIES
584 Say Y here if you intend to run this kernel on a Toshiba
590 depends on ARCH_PXA_ESERIES
592 Say Y here if you intend to run this kernel on a Toshiba
598 depends on ARCH_PXA_ESERIES
600 Say Y here if you intend to run this kernel on a Toshiba
604 bool "Zipit Z2 Handheld"
612 Select code specific to PXA21x/25x/26x variants
618 Select code specific to PXA27x variants
624 Select code specific to PXA26x (codename Dalhart)
630 Select code specific to PXA3xx variants
636 PXA300 (codename Monahans-L)
641 select PXA310_ULPI if USB_ULPI
643 PXA310 (codename Monahans-LV)
649 PXA320 (codename Monahans-P)
655 PXA930 (codename Tavor-P)
661 PXA935 (codename Tavor-P65)
663 config PXA_SHARP_C7xx
667 Enable support for all Sharp C7xx models
669 config PXA_SHARP_Cxx00
673 Enable common support for Sharp Cxx00 models
678 select SHARPSL_PM_MAX1111
680 config SHARPSL_PM_MAX1111
683 select SENSORS_MAX1111
690 config PXA_SYSTEMS_CPLDS
691 tristate "Motherboard cplds"
692 default ARCH_LUBBOCK || MACH_MAINSTONE
694 This driver supports the Lubbock and Mainstone multifunction chip
695 found on the pxa25x development platform system (Lubbock) and pxa27x
696 development platform system (Mainstone). This IO board supports the
697 interrupts handling, ethernet controller, flash chips, etc ...