arch/arm/mach-omap2/board-rx51-peripherals.c

   1 /*
   2  * linux/arch/arm/mach-omap2/board-rx51-peripherals.c
   3  *
   4  * Copyright (C) 2008-2009 Nokia
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License version 2 as
   8  * published by the Free Software Foundation.
   9  */
  10
  11 #include <linux/kernel.h>
  12 #include <linux/init.h>
  13 #include <linux/platform_device.h>
  14 #include <linux/input.h>
  15 #include <linux/input/matrix_keypad.h>
  16 #include <linux/spi/spi.h>
  17 #include <linux/spi/wl12xx.h>
  18 #include <linux/i2c.h>
  19 #include <linux/i2c/twl4030.h>
  20 #include <linux/clk.h>
  21 #include <linux/delay.h>
  22 #include <linux/regulator/machine.h>
  23 #include <linux/gpio.h>
  24 #include <linux/gpio_keys.h>
  25 #include <linux/mmc/host.h>
  26
  27 #include <plat/mcspi.h>
  28 #include <plat/mux.h>
  29 #include <plat/board.h>
  30 #include <plat/common.h>
  31 #include <plat/dma.h>
  32 #include <plat/gpmc.h>
  33 #include <plat/onenand.h>
  34 #include <plat/gpmc-smc91x.h>
  35
  36 #include "mux.h"
  37 #include "mmc-twl4030.h"
  38
  39 #define SYSTEM_REV_B_USES_VAUX3 0x1699
  40 #define SYSTEM_REV_S_USES_VAUX3 0x8
  41
  42 #define RX51_WL1251_POWER_GPIO          87
  43 #define RX51_WL1251_IRQ_GPIO            42
  44
  45 /* list all spi devices here */
  46 enum {
  47         RX51_SPI_WL1251,
  48 };
  49
  50 static struct wl12xx_platform_data wl1251_pdata;
  51
  52 static struct omap2_mcspi_device_config wl1251_mcspi_config = {
  53         .turbo_mode     = 0,
  54         .single_channel = 1,
  55 };
  56
  57 static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
  58         [RX51_SPI_WL1251] = {
  59                 .modalias               = "wl1251",
  60                 .bus_num                = 4,
  61                 .chip_select            = 0,
  62                 .max_speed_hz           = 48000000,
  63                 .mode                   = SPI_MODE_3,
  64                 .controller_data        = &wl1251_mcspi_config,
  65                 .platform_data          = &wl1251_pdata,
  66         },
  67 };
  68
  69 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
  70
  71 #define RX51_GPIO_CAMERA_LENS_COVER     110
  72 #define RX51_GPIO_CAMERA_FOCUS          68
  73 #define RX51_GPIO_CAMERA_CAPTURE        69
  74 #define RX51_GPIO_KEYPAD_SLIDE          71
  75 #define RX51_GPIO_LOCK_BUTTON           113
  76 #define RX51_GPIO_PROXIMITY             89
  77
  78 #define RX51_GPIO_DEBOUNCE_TIMEOUT      10
  79
  80 static struct gpio_keys_button rx51_gpio_keys[] = {
  81         {
  82                 .desc                   = "Camera Lens Cover",
  83                 .type                   = EV_SW,
  84                 .code                   = SW_CAMERA_LENS_COVER,
  85                 .gpio                   = RX51_GPIO_CAMERA_LENS_COVER,
  86                 .active_low             = 1,
  87                 .debounce_interval      = RX51_GPIO_DEBOUNCE_TIMEOUT,
  88         }, {
  89                 .desc                   = "Camera Focus",
  90                 .type                   = EV_KEY,
  91                 .code                   = KEY_CAMERA_FOCUS,
  92                 .gpio                   = RX51_GPIO_CAMERA_FOCUS,
  93                 .active_low             = 1,
  94                 .debounce_interval      = RX51_GPIO_DEBOUNCE_TIMEOUT,
  95         }, {
  96                 .desc                   = "Camera Capture",
  97                 .type                   = EV_KEY,
  98                 .code                   = KEY_CAMERA,
  99                 .gpio                   = RX51_GPIO_CAMERA_CAPTURE,
 100                 .active_low             = 1,
 101                 .debounce_interval      = RX51_GPIO_DEBOUNCE_TIMEOUT,
 102         }, {
 103                 .desc                   = "Lock Button",
 104                 .type                   = EV_KEY,
 105                 .code                   = KEY_SCREENLOCK,
 106                 .gpio                   = RX51_GPIO_LOCK_BUTTON,
 107                 .active_low             = 1,
 108                 .debounce_interval      = RX51_GPIO_DEBOUNCE_TIMEOUT,
 109         }, {
 110                 .desc                   = "Keypad Slide",
 111                 .type                   = EV_SW,
 112                 .code                   = SW_KEYPAD_SLIDE,
 113                 .gpio                   = RX51_GPIO_KEYPAD_SLIDE,
 114                 .active_low             = 1,
 115                 .debounce_interval      = RX51_GPIO_DEBOUNCE_TIMEOUT,
 116         }, {
 117                 .desc                   = "Proximity Sensor",
 118                 .type                   = EV_SW,
 119                 .code                   = SW_FRONT_PROXIMITY,
 120                 .gpio                   = RX51_GPIO_PROXIMITY,
 121                 .active_low             = 0,
 122                 .debounce_interval      = RX51_GPIO_DEBOUNCE_TIMEOUT,
 123         }
 124 };
 125
 126 static struct gpio_keys_platform_data rx51_gpio_keys_data = {
 127         .buttons        = rx51_gpio_keys,
 128         .nbuttons       = ARRAY_SIZE(rx51_gpio_keys),
 129 };
 130
 131 static struct platform_device rx51_gpio_keys_device = {
 132         .name   = "gpio-keys",
 133         .id     = -1,
 134         .dev    = {
 135                 .platform_data  = &rx51_gpio_keys_data,
 136         },
 137 };
 138
 139 static void __init rx51_add_gpio_keys(void)
 140 {
 141         platform_device_register(&rx51_gpio_keys_device);
 142 }
 143 #else
 144 static void __init rx51_add_gpio_keys(void)
 145 {
 146 }
 147 #endif /* CONFIG_KEYBOARD_GPIO || CONFIG_KEYBOARD_GPIO_MODULE */
 148
 149 static int board_keymap[] = {
 150         KEY(0, 0, KEY_Q),
 151         KEY(0, 1, KEY_O),
 152         KEY(0, 2, KEY_P),
 153         KEY(0, 3, KEY_COMMA),
 154         KEY(0, 4, KEY_BACKSPACE),
 155         KEY(0, 6, KEY_A),
 156         KEY(0, 7, KEY_S),
 157         KEY(1, 0, KEY_W),
 158         KEY(1, 1, KEY_D),
 159         KEY(1, 2, KEY_F),
 160         KEY(1, 3, KEY_G),
 161         KEY(1, 4, KEY_H),
 162         KEY(1, 5, KEY_J),
 163         KEY(1, 6, KEY_K),
 164         KEY(1, 7, KEY_L),
 165         KEY(2, 0, KEY_E),
 166         KEY(2, 1, KEY_DOT),
 167         KEY(2, 2, KEY_UP),
 168         KEY(2, 3, KEY_ENTER),
 169         KEY(2, 5, KEY_Z),
 170         KEY(2, 6, KEY_X),
 171         KEY(2, 7, KEY_C),
 172         KEY(3, 0, KEY_R),
 173         KEY(3, 1, KEY_V),
 174         KEY(3, 2, KEY_B),
 175         KEY(3, 3, KEY_N),
 176         KEY(3, 4, KEY_M),
 177         KEY(3, 5, KEY_SPACE),
 178         KEY(3, 6, KEY_SPACE),
 179         KEY(3, 7, KEY_LEFT),
 180         KEY(4, 0, KEY_T),
 181         KEY(4, 1, KEY_DOWN),
 182         KEY(4, 2, KEY_RIGHT),
 183         KEY(4, 4, KEY_LEFTCTRL),
 184         KEY(4, 5, KEY_RIGHTALT),
 185         KEY(4, 6, KEY_LEFTSHIFT),
 186         KEY(5, 0, KEY_Y),
 187         KEY(6, 0, KEY_U),
 188         KEY(7, 0, KEY_I),
 189         KEY(7, 1, KEY_F7),
 190         KEY(7, 2, KEY_F8),
 191         KEY(0xff, 2, KEY_F9),
 192         KEY(0xff, 4, KEY_F10),
 193         KEY(0xff, 5, KEY_F11),
 194 };
 195
 196 static struct matrix_keymap_data board_map_data = {
 197         .keymap                 = board_keymap,
 198         .keymap_size            = ARRAY_SIZE(board_keymap),
 199 };
 200
 201 static struct twl4030_keypad_data rx51_kp_data = {
 202         .keymap_data    = &board_map_data,
 203         .rows           = 8,
 204         .cols           = 8,
 205         .rep            = 1,
 206 };
 207
 208 static struct twl4030_madc_platform_data rx51_madc_data = {
 209         .irq_line               = 1,
 210 };
 211
 212 static struct twl4030_hsmmc_info mmc[] = {
 213         {
 214                 .name           = "external",
 215                 .mmc            = 1,
 216                 .wires          = 4,
 217                 .cover_only     = true,
 218                 .gpio_cd        = 160,
 219                 .gpio_wp        = -EINVAL,
 220                 .power_saving   = true,
 221         },
 222         {
 223                 .name           = "internal",
 224                 .mmc            = 2,
 225                 .wires          = 8,
 226                 .gpio_cd        = -EINVAL,
 227                 .gpio_wp        = -EINVAL,
 228                 .nonremovable   = true,
 229                 .power_saving   = true,
 230         },
 231         {}      /* Terminator */
 232 };
 233
 234 static struct regulator_consumer_supply rx51_vmmc1_supply = {
 235         .supply                 = "vmmc",
 236 };
 237
 238 static struct regulator_consumer_supply rx51_vmmc2_supply = {
 239         .supply                 = "vmmc",
 240 };
 241
 242 static struct regulator_consumer_supply rx51_vsim_supply = {
 243         .supply                 = "vmmc_aux",
 244 };
 245
 246 static struct regulator_init_data rx51_vaux1 = {
 247         .constraints = {
 248                 .name                   = "V28",
 249                 .min_uV                 = 2800000,
 250                 .max_uV                 = 2800000,
 251                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 252                                         | REGULATOR_MODE_STANDBY,
 253                 .valid_ops_mask         = REGULATOR_CHANGE_MODE
 254                                         | REGULATOR_CHANGE_STATUS,
 255         },
 256 };
 257
 258 static struct regulator_init_data rx51_vaux2 = {
 259         .constraints = {
 260                 .name                   = "VCSI",
 261                 .min_uV                 = 1800000,
 262                 .max_uV                 = 1800000,
 263                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 264                                         | REGULATOR_MODE_STANDBY,
 265                 .valid_ops_mask         = REGULATOR_CHANGE_MODE
 266                                         | REGULATOR_CHANGE_STATUS,
 267         },
 268 };
 269
 270 /* VAUX3 - adds more power to VIO_18 rail */
 271 static struct regulator_init_data rx51_vaux3_cam = {
 272         .constraints = {
 273                 .name                   = "VCAM_DIG_18",
 274                 .min_uV                 = 1800000,
 275                 .max_uV                 = 1800000,
 276                 .apply_uV               = true,
 277                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 278                                         | REGULATOR_MODE_STANDBY,
 279                 .valid_ops_mask         = REGULATOR_CHANGE_MODE
 280                                         | REGULATOR_CHANGE_STATUS,
 281         },
 282 };
 283
 284 static struct regulator_init_data rx51_vaux3_mmc = {
 285         .constraints = {
 286                 .name                   = "VMMC2_30",
 287                 .min_uV                 = 2800000,
 288                 .max_uV                 = 3000000,
 289                 .apply_uV               = true,
 290                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 291                                         | REGULATOR_MODE_STANDBY,
 292                 .valid_ops_mask         = REGULATOR_CHANGE_VOLTAGE
 293                                         | REGULATOR_CHANGE_MODE
 294                                         | REGULATOR_CHANGE_STATUS,
 295         },
 296         .num_consumer_supplies  = 1,
 297         .consumer_supplies      = &rx51_vmmc2_supply,
 298 };
 299
 300 static struct regulator_init_data rx51_vaux4 = {
 301         .constraints = {
 302                 .name                   = "VCAM_ANA_28",
 303                 .min_uV                 = 2800000,
 304                 .max_uV                 = 2800000,
 305                 .apply_uV               = true,
 306                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 307                                         | REGULATOR_MODE_STANDBY,
 308                 .valid_ops_mask         = REGULATOR_CHANGE_MODE
 309                                         | REGULATOR_CHANGE_STATUS,
 310         },
 311 };
 312
 313 static struct regulator_init_data rx51_vmmc1 = {
 314         .constraints = {
 315                 .min_uV                 = 1850000,
 316                 .max_uV                 = 3150000,
 317                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 318                                         | REGULATOR_MODE_STANDBY,
 319                 .valid_ops_mask         = REGULATOR_CHANGE_VOLTAGE
 320                                         | REGULATOR_CHANGE_MODE
 321                                         | REGULATOR_CHANGE_STATUS,
 322         },
 323         .num_consumer_supplies  = 1,
 324         .consumer_supplies      = &rx51_vmmc1_supply,
 325 };
 326
 327 static struct regulator_init_data rx51_vmmc2 = {
 328         .constraints = {
 329                 .name                   = "VMMC2_30",
 330                 .min_uV                 = 1850000,
 331                 .max_uV                 = 3150000,
 332                 .apply_uV               = true,
 333                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 334                                         | REGULATOR_MODE_STANDBY,
 335                 .valid_ops_mask         = REGULATOR_CHANGE_VOLTAGE
 336                                         | REGULATOR_CHANGE_MODE
 337                                         | REGULATOR_CHANGE_STATUS,
 338         },
 339         .num_consumer_supplies  = 1,
 340         .consumer_supplies      = &rx51_vmmc2_supply,
 341 };
 342
 343 static struct regulator_init_data rx51_vsim = {
 344         .constraints = {
 345                 .name                   = "VMMC2_IO_18",
 346                 .min_uV                 = 1800000,
 347                 .max_uV                 = 1800000,
 348                 .apply_uV               = true,
 349                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 350                                         | REGULATOR_MODE_STANDBY,
 351                 .valid_ops_mask         = REGULATOR_CHANGE_MODE
 352                                         | REGULATOR_CHANGE_STATUS,
 353         },
 354         .num_consumer_supplies  = 1,
 355         .consumer_supplies      = &rx51_vsim_supply,
 356 };
 357
 358 static struct regulator_init_data rx51_vdac = {
 359         .constraints = {
 360                 .min_uV                 = 1800000,
 361                 .max_uV                 = 1800000,
 362                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 363                                         | REGULATOR_MODE_STANDBY,
 364                 .valid_ops_mask         = REGULATOR_CHANGE_VOLTAGE
 365                                         | REGULATOR_CHANGE_MODE
 366                                         | REGULATOR_CHANGE_STATUS,
 367         },
 368 };
 369
 370 static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n)
 371 {
 372         /* FIXME this gpio setup is just a placeholder for now */
 373         gpio_request(gpio + 6, "backlight_pwm");
 374         gpio_direction_output(gpio + 6, 0);
 375         gpio_request(gpio + 7, "speaker_en");
 376         gpio_direction_output(gpio + 7, 1);
 377
 378         /* set up MMC adapters, linking their regulators to them */
 379         twl4030_mmc_init(mmc);
 380         rx51_vmmc1_supply.dev = mmc[0].dev;
 381         rx51_vmmc2_supply.dev = mmc[1].dev;
 382         rx51_vsim_supply.dev = mmc[1].dev;
 383
 384         return 0;
 385 }
 386
 387 static struct twl4030_gpio_platform_data rx51_gpio_data = {
 388         .gpio_base              = OMAP_MAX_GPIO_LINES,
 389         .irq_base               = TWL4030_GPIO_IRQ_BASE,
 390         .irq_end                = TWL4030_GPIO_IRQ_END,
 391         .pulldowns              = BIT(0) | BIT(1) | BIT(2) | BIT(3)
 392                                 | BIT(4) | BIT(5)
 393                                 | BIT(8) | BIT(9) | BIT(10) | BIT(11)
 394                                 | BIT(12) | BIT(13) | BIT(14) | BIT(15)
 395                                 | BIT(16) | BIT(17) ,
 396         .setup                  = rx51_twlgpio_setup,
 397 };
 398
 399 static struct twl4030_usb_data rx51_usb_data = {
 400         .usb_mode               = T2_USB_MODE_ULPI,
 401 };
 402
 403 static struct twl4030_ins sleep_on_seq[] __initdata = {
 404 /*
 405  * Turn off everything
 406  */
 407         {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_SLEEP), 2},
 408 };
 409
 410 static struct twl4030_script sleep_on_script __initdata = {
 411         .script = sleep_on_seq,
 412         .size   = ARRAY_SIZE(sleep_on_seq),
 413         .flags  = TWL4030_SLEEP_SCRIPT,
 414 };
 415
 416 static struct twl4030_ins wakeup_seq[] __initdata = {
 417 /*
 418  * Reenable everything
 419  */
 420         {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_ACTIVE), 2},
 421 };
 422
 423 static struct twl4030_script wakeup_script __initdata = {
 424         .script = wakeup_seq,
 425         .size   = ARRAY_SIZE(wakeup_seq),
 426         .flags  = TWL4030_WAKEUP12_SCRIPT,
 427 };
 428
 429 static struct twl4030_ins wakeup_p3_seq[] __initdata = {
 430 /*
 431  * Reenable everything
 432  */
 433         {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_ACTIVE), 2},
 434 };
 435
 436 static struct twl4030_script wakeup_p3_script __initdata = {
 437         .script = wakeup_p3_seq,
 438         .size   = ARRAY_SIZE(wakeup_p3_seq),
 439         .flags  = TWL4030_WAKEUP3_SCRIPT,
 440 };
 441
 442 static struct twl4030_ins wrst_seq[] __initdata = {
 443 /*
 444  * Reset twl4030.
 445  * Reset VDD1 regulator.
 446  * Reset VDD2 regulator.
 447  * Reset VPLL1 regulator.
 448  * Enable sysclk output.
 449  * Reenable twl4030.
 450  */
 451         {MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_OFF), 2},
 452         {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 0, 1, RES_STATE_ACTIVE),
 453                 0x13},
 454         {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_PP, 0, 3, RES_STATE_OFF), 0x13},
 455         {MSG_SINGULAR(DEV_GRP_NULL, RES_VDD1, RES_STATE_WRST), 0x13},
 456         {MSG_SINGULAR(DEV_GRP_NULL, RES_VDD2, RES_STATE_WRST), 0x13},
 457         {MSG_SINGULAR(DEV_GRP_NULL, RES_VPLL1, RES_STATE_WRST), 0x35},
 458         {MSG_SINGULAR(DEV_GRP_P3, RES_HFCLKOUT, RES_STATE_ACTIVE), 2},
 459         {MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_ACTIVE), 2},
 460 };
 461
 462 static struct twl4030_script wrst_script __initdata = {
 463         .script = wrst_seq,
 464         .size   = ARRAY_SIZE(wrst_seq),
 465         .flags  = TWL4030_WRST_SCRIPT,
 466 };
 467
 468 static struct twl4030_script *twl4030_scripts[] __initdata = {
 469         /* wakeup12 script should be loaded before sleep script, otherwise a
 470            board might hit retention before loading of wakeup script is
 471            completed. This can cause boot failures depending on timing issues.
 472         */
 473         &wakeup_script,
 474         &sleep_on_script,
 475         &wakeup_p3_script,
 476         &wrst_script,
 477 };
 478
 479 static struct twl4030_resconfig twl4030_rconfig[] __initdata = {
 480         { .resource = RES_VDD1, .devgroup = -1,
 481           .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF,
 482           .remap_sleep = RES_STATE_OFF
 483         },
 484         { .resource = RES_VDD2, .devgroup = -1,
 485           .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF,
 486           .remap_sleep = RES_STATE_OFF
 487         },
 488         { .resource = RES_VPLL1, .devgroup = -1,
 489           .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF,
 490           .remap_sleep = RES_STATE_OFF
 491         },
 492         { .resource = RES_VPLL2, .devgroup = -1,
 493           .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
 494         },
 495         { .resource = RES_VAUX1, .devgroup = -1,
 496           .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
 497         },
 498         { .resource = RES_VAUX2, .devgroup = -1,
 499           .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
 500         },
 501         { .resource = RES_VAUX3, .devgroup = -1,
 502           .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
 503         },
 504         { .resource = RES_VAUX4, .devgroup = -1,
 505           .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
 506         },
 507         { .resource = RES_VMMC1, .devgroup = -1,
 508           .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
 509         },
 510         { .resource = RES_VMMC2, .devgroup = -1,
 511           .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
 512         },
 513         { .resource = RES_VDAC, .devgroup = -1,
 514           .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
 515         },
 516         { .resource = RES_VSIM, .devgroup = -1,
 517           .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
 518         },
 519         { .resource = RES_VINTANA1, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
 520           .type = -1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
 521         },
 522         { .resource = RES_VINTANA2, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
 523           .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
 524         },
 525         { .resource = RES_VINTDIG, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
 526           .type = -1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
 527         },
 528         { .resource = RES_VIO, .devgroup = DEV_GRP_P3,
 529           .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
 530         },
 531         { .resource = RES_CLKEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
 532           .type = 1, .type2 = -1 , .remap_off = -1, .remap_sleep = -1
 533         },
 534         { .resource = RES_REGEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
 535           .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
 536         },
 537         { .resource = RES_NRES_PWRON, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
 538           .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
 539         },
 540         { .resource = RES_SYSEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
 541           .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
 542         },
 543         { .resource = RES_HFCLKOUT, .devgroup = DEV_GRP_P3,
 544           .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
 545         },
 546         { .resource = RES_32KCLKOUT, .devgroup = -1,
 547           .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
 548         },
 549         { .resource = RES_RESET, .devgroup = -1,
 550           .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
 551         },
 552         { .resource = RES_Main_Ref, .devgroup = -1,
 553           .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
 554         },
 555         { 0, 0},
 556 };
 557
 558 static struct twl4030_power_data rx51_t2scripts_data __initdata = {
 559         .scripts        = twl4030_scripts,
 560         .num = ARRAY_SIZE(twl4030_scripts),
 561         .resource_config = twl4030_rconfig,
 562 };
 563
 564
 565
 566 static struct twl4030_platform_data rx51_twldata __initdata = {
 567         .irq_base               = TWL4030_IRQ_BASE,
 568         .irq_end                = TWL4030_IRQ_END,
 569
 570         /* platform_data for children goes here */
 571         .gpio                   = &rx51_gpio_data,
 572         .keypad                 = &rx51_kp_data,
 573         .madc                   = &rx51_madc_data,
 574         .usb                    = &rx51_usb_data,
 575         .power                  = &rx51_t2scripts_data,
 576
 577         .vaux1                  = &rx51_vaux1,
 578         .vaux2                  = &rx51_vaux2,
 579         .vaux4                  = &rx51_vaux4,
 580         .vmmc1                  = &rx51_vmmc1,
 581         .vsim                   = &rx51_vsim,
 582         .vdac                   = &rx51_vdac,
 583 };
 584
 585 static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = {
 586         {
 587                 I2C_BOARD_INFO("twl5030", 0x48),
 588                 .flags = I2C_CLIENT_WAKE,
 589                 .irq = INT_34XX_SYS_NIRQ,
 590                 .platform_data = &rx51_twldata,
 591         },
 592 };
 593
 594 static int __init rx51_i2c_init(void)
 595 {
 596         if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) ||
 597             system_rev >= SYSTEM_REV_B_USES_VAUX3)
 598                 rx51_twldata.vaux3 = &rx51_vaux3_mmc;
 599         else {
 600                 rx51_twldata.vaux3 = &rx51_vaux3_cam;
 601                 rx51_twldata.vmmc2 = &rx51_vmmc2;
 602         }
 603         omap_register_i2c_bus(1, 2200, rx51_peripherals_i2c_board_info_1,
 604                         ARRAY_SIZE(rx51_peripherals_i2c_board_info_1));
 605         omap_register_i2c_bus(2, 100, NULL, 0);
 606         omap_register_i2c_bus(3, 400, NULL, 0);
 607         return 0;
 608 }
 609
 610 #if defined(CONFIG_MTD_ONENAND_OMAP2) || \
 611         defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
 612
 613 static struct mtd_partition onenand_partitions[] = {
 614         {
 615                 .name           = "bootloader",
 616                 .offset         = 0,
 617                 .size           = 0x20000,
 618                 .mask_flags     = MTD_WRITEABLE,        /* Force read-only */
 619         },
 620         {
 621                 .name           = "config",
 622                 .offset         = MTDPART_OFS_APPEND,
 623                 .size           = 0x60000,
 624         },
 625         {
 626                 .name           = "log",
 627                 .offset         = MTDPART_OFS_APPEND,
 628                 .size           = 0x40000,
 629         },
 630         {
 631                 .name           = "kernel",
 632                 .offset         = MTDPART_OFS_APPEND,
 633                 .size           = 0x200000,
 634         },
 635         {
 636                 .name           = "initfs",
 637                 .offset         = MTDPART_OFS_APPEND,
 638                 .size           = 0x200000,
 639         },
 640         {
 641                 .name           = "rootfs",
 642                 .offset         = MTDPART_OFS_APPEND,
 643                 .size           = MTDPART_SIZ_FULL,
 644         },
 645 };
 646
 647 static struct omap_onenand_platform_data board_onenand_data = {
 648         .cs             = 0,
 649         .gpio_irq       = 65,
 650         .parts          = onenand_partitions,
 651         .nr_parts       = ARRAY_SIZE(onenand_partitions),
 652         .flags          = ONENAND_SYNC_READWRITE,
 653 };
 654
 655 static void __init board_onenand_init(void)
 656 {
 657         gpmc_onenand_init(&board_onenand_data);
 658 }
 659
 660 #else
 661
 662 static inline void board_onenand_init(void)
 663 {
 664 }
 665
 666 #endif
 667
 668 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
 669
 670 static struct omap_smc91x_platform_data board_smc91x_data = {
 671         .cs             = 1,
 672         .gpio_irq       = 54,
 673         .gpio_pwrdwn    = 86,
 674         .gpio_reset     = 164,
 675         .flags          = GPMC_TIMINGS_SMC91C96 | IORESOURCE_IRQ_HIGHLEVEL,
 676 };
 677
 678 static void __init board_smc91x_init(void)
 679 {
 680         omap_mux_init_gpio(54, OMAP_PIN_INPUT_PULLDOWN);
 681         omap_mux_init_gpio(86, OMAP_PIN_OUTPUT);
 682         omap_mux_init_gpio(164, OMAP_PIN_OUTPUT);
 683
 684         gpmc_smc91x_init(&board_smc91x_data);
 685 }
 686
 687 #else
 688
 689 static inline void board_smc91x_init(void)
 690 {
 691 }
 692
 693 #endif
 694
 695 static void rx51_wl1251_set_power(bool enable)
 696 {
 697         gpio_set_value(RX51_WL1251_POWER_GPIO, enable);
 698 }
 699
 700 static void __init rx51_init_wl1251(void)
 701 {
 702         int irq, ret;
 703
 704         ret = gpio_request(RX51_WL1251_POWER_GPIO, "wl1251 power");
 705         if (ret < 0)
 706                 goto error;
 707
 708         ret = gpio_direction_output(RX51_WL1251_POWER_GPIO, 0);
 709         if (ret < 0)
 710                 goto err_power;
 711
 712         ret = gpio_request(RX51_WL1251_IRQ_GPIO, "wl1251 irq");
 713         if (ret < 0)
 714                 goto err_power;
 715
 716         ret = gpio_direction_input(RX51_WL1251_IRQ_GPIO);
 717         if (ret < 0)
 718                 goto err_irq;
 719
 720         irq = gpio_to_irq(RX51_WL1251_IRQ_GPIO);
 721         if (irq < 0)
 722                 goto err_irq;
 723
 724         wl1251_pdata.set_power = rx51_wl1251_set_power;
 725         rx51_peripherals_spi_board_info[RX51_SPI_WL1251].irq = irq;
 726
 727         return;
 728
 729 err_irq:
 730         gpio_free(RX51_WL1251_IRQ_GPIO);
 731
 732 err_power:
 733         gpio_free(RX51_WL1251_POWER_GPIO);
 734
 735 error:
 736         printk(KERN_ERR "wl1251 board initialisation failed\n");
 737         wl1251_pdata.set_power = NULL;
 738
 739         /*
 740          * Now rx51_peripherals_spi_board_info[1].irq is zero and
 741          * set_power is null, and wl1251_probe() will fail.
 742          */
 743 }
 744
 745 void __init rx51_peripherals_init(void)
 746 {
 747         rx51_i2c_init();
 748         board_onenand_init();
 749         board_smc91x_init();
 750         rx51_add_gpio_keys();
 751         rx51_init_wl1251();
 752         spi_register_board_info(rx51_peripherals_spi_board_info,
 753                                 ARRAY_SIZE(rx51_peripherals_spi_board_info));
 754 }
 755