arch/arm/mach-omap1/board-palmte.c

   1 /*
   2  * linux/arch/arm/mach-omap1/board-palmte.c
   3  *
   4  * Modified from board-generic.c
   5  *
   6  * Support for the Palm Tungsten E PDA.
   7  *
   8  * Original version : Laurent Gonzalez
   9  *
  10  * Maintainers : http://palmtelinux.sf.net
  11  *                palmtelinux-developpers@lists.sf.net
  12  *
  13  * Copyright (c) 2006 Andrzej Zaborowski  <balrog@zabor.org>
  14  *
  15  * This program is free software; you can redistribute it and/or modify
  16  * it under the terms of the GNU General Public License version 2 as
  17  * published by the Free Software Foundation.
  18  */
  19
  20 #include <linux/kernel.h>
  21 #include <linux/init.h>
  22 #include <linux/input.h>
  23 #include <linux/platform_device.h>
  24 #include <linux/mtd/mtd.h>
  25 #include <linux/mtd/partitions.h>
  26 #include <linux/spi/spi.h>
  27 #include <linux/spi/tsc2102.h>
  28 #include <linux/interrupt.h>
  29 #include <linux/apm-emulation.h>
  30
  31 #include <asm/hardware.h>
  32 #include <asm/mach-types.h>
  33 #include <asm/mach/arch.h>
  34 #include <asm/mach/map.h>
  35 #include <asm/mach/flash.h>
  36
  37 #include <asm/arch/gpio.h>
  38 #include <asm/arch/mux.h>
  39 #include <asm/arch/usb.h>
  40 #include <asm/arch/tc.h>
  41 #include <asm/arch/dma.h>
  42 #include <asm/arch/board.h>
  43 #include <asm/arch/irda.h>
  44 #include <asm/arch/keypad.h>
  45 #include <asm/arch/common.h>
  46 #include <asm/arch/mcbsp.h>
  47 #include <asm/arch/omap-alsa.h>
  48
  49 static void __init omap_palmte_init_irq(void)
  50 {
  51         omap1_init_common_hw();
  52         omap_init_irq();
  53         omap_gpio_init();
  54 }
  55
  56 static const int palmte_keymap[] = {
  57         KEY(0, 0, KEY_F1),              /* Calendar */
  58         KEY(0, 1, KEY_F2),              /* Contacts */
  59         KEY(0, 2, KEY_F3),              /* Tasks List */
  60         KEY(0, 3, KEY_F4),              /* Note Pad */
  61         KEY(0, 4, KEY_POWER),
  62         KEY(1, 0, KEY_LEFT),
  63         KEY(1, 1, KEY_DOWN),
  64         KEY(1, 2, KEY_UP),
  65         KEY(1, 3, KEY_RIGHT),
  66         KEY(1, 4, KEY_CENTER),
  67         0,
  68 };
  69
  70 static struct omap_kp_platform_data palmte_kp_data = {
  71         .rows   = 8,
  72         .cols   = 8,
  73         .keymap = (int *) palmte_keymap,
  74         .rep    = 1,
  75         .delay  = 12,
  76 };
  77
  78 static struct resource palmte_kp_resources[] = {
  79         [0]     = {
  80                 .start  = INT_KEYBOARD,
  81                 .end    = INT_KEYBOARD,
  82                 .flags  = IORESOURCE_IRQ,
  83         },
  84 };
  85
  86 static struct platform_device palmte_kp_device = {
  87         .name           = "omap-keypad",
  88         .id             = -1,
  89         .dev            = {
  90                 .platform_data  = &palmte_kp_data,
  91         },
  92         .num_resources  = ARRAY_SIZE(palmte_kp_resources),
  93         .resource       = palmte_kp_resources,
  94 };
  95
  96 static struct mtd_partition palmte_rom_partitions[] = {
  97         /* PalmOS "Small ROM", contains the bootloader and the debugger */
  98         {
  99                 .name           = "smallrom",
 100                 .offset         = 0,
 101                 .size           = 0xa000,
 102                 .mask_flags     = MTD_WRITEABLE,
 103         },
 104         /* PalmOS "Big ROM", a filesystem with all the OS code and data */
 105         {
 106                 .name           = "bigrom",
 107                 .offset         = SZ_128K,
 108                 /*
 109                  * 0x5f0000 bytes big in the multi-language ("EFIGS") version,
 110                  * 0x7b0000 bytes in the English-only ("enUS") version.
 111                  */
 112                 .size           = 0x7b0000,
 113                 .mask_flags     = MTD_WRITEABLE,
 114         },
 115 };
 116
 117 static struct flash_platform_data palmte_rom_data = {
 118         .map_name       = "map_rom",
 119         .width          = 2,
 120         .parts          = palmte_rom_partitions,
 121         .nr_parts       = ARRAY_SIZE(palmte_rom_partitions),
 122 };
 123
 124 static struct resource palmte_rom_resource = {
 125         .start          = OMAP_CS0_PHYS,
 126         .end            = OMAP_CS0_PHYS + SZ_8M - 1,
 127         .flags          = IORESOURCE_MEM,
 128 };
 129
 130 static struct platform_device palmte_rom_device = {
 131         .name           = "omapflash",
 132         .id             = -1,
 133         .dev            = {
 134                 .platform_data  = &palmte_rom_data,
 135         },
 136         .num_resources  = 1,
 137         .resource       = &palmte_rom_resource,
 138 };
 139
 140 static struct platform_device palmte_lcd_device = {
 141         .name           = "lcd_palmte",
 142         .id             = -1,
 143 };
 144
 145 static struct omap_backlight_config palmte_backlight_config = {
 146         .default_intensity      = 0xa0,
 147 };
 148
 149 static struct platform_device palmte_backlight_device = {
 150         .name           = "omap-bl",
 151         .id             = -1,
 152         .dev            = {
 153                 .platform_data  = &palmte_backlight_config,
 154         },
 155 };
 156
 157 static struct omap_irda_config palmte_irda_config = {
 158         .transceiver_cap        = IR_SIRMODE,
 159         .rx_channel             = OMAP_DMA_UART3_RX,
 160         .tx_channel             = OMAP_DMA_UART3_TX,
 161         .dest_start             = UART3_THR,
 162         .src_start              = UART3_RHR,
 163         .tx_trigger             = 0,
 164         .rx_trigger             = 0,
 165 };
 166
 167 static struct resource palmte_irda_resources[] = {
 168         [0]     = {
 169                 .start  = INT_UART3,
 170                 .end    = INT_UART3,
 171                 .flags  = IORESOURCE_IRQ,
 172         },
 173 };
 174
 175 static struct platform_device palmte_irda_device = {
 176         .name           = "omapirda",
 177         .id             = -1,
 178         .dev            = {
 179                 .platform_data  = &palmte_irda_config,
 180         },
 181         .num_resources  = ARRAY_SIZE(palmte_irda_resources),
 182         .resource       = palmte_irda_resources,
 183 };
 184
 185 static struct platform_device *palmte_devices[] __initdata = {
 186         &palmte_rom_device,
 187         &palmte_kp_device,
 188         &palmte_lcd_device,
 189         &palmte_backlight_device,
 190         &palmte_irda_device,
 191 };
 192
 193 static struct omap_usb_config palmte_usb_config __initdata = {
 194         .register_dev   = 1,    /* Mini-B only receptacle */
 195         .hmc_mode       = 0,
 196         .pins[0]        = 2,
 197 };
 198
 199 static struct omap_mmc_config palmte_mmc_config __initdata = {
 200         .mmc[0]         = {
 201                 .enabled        = 1,
 202                 .wp_pin         = PALMTE_MMC_WP_GPIO,
 203                 .power_pin      = PALMTE_MMC_POWER_GPIO,
 204                 .switch_pin     = PALMTE_MMC_SWITCH_GPIO,
 205         },
 206 };
 207
 208 static struct omap_lcd_config palmte_lcd_config __initdata = {
 209         .ctrl_name      = "internal",
 210 };
 211
 212 static struct omap_uart_config palmte_uart_config __initdata = {
 213         .enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),
 214 };
 215
 216 static struct omap_mcbsp_reg_cfg palmte_mcbsp1_regs = {
 217         .spcr2  = FRST | GRST | XRST | XINTM(3),
 218         .xcr2   = XDATDLY(1) | XFIG,
 219         .xcr1   = XWDLEN1(OMAP_MCBSP_WORD_32),
 220         .pcr0   = SCLKME | FSXP | CLKXP,
 221 };
 222
 223 static struct omap_alsa_codec_config palmte_alsa_config = {
 224         .name                   = "TSC2102 audio",
 225         .mcbsp_regs_alsa        = &palmte_mcbsp1_regs,
 226         .codec_configure_dev    = NULL, /* tsc2102_configure, */
 227         .codec_set_samplerate   = NULL, /* tsc2102_set_samplerate, */
 228         .codec_clock_setup      = NULL, /* tsc2102_clock_setup, */
 229         .codec_clock_on         = NULL, /* tsc2102_clock_on, */
 230         .codec_clock_off        = NULL, /* tsc2102_clock_off, */
 231         .get_default_samplerate = NULL, /* tsc2102_get_default_samplerate, */
 232 };
 233
 234 #ifdef CONFIG_APM
 235 /*
 236  * Values measured in 10 minute intervals averaged over 10 samples.
 237  * May differ slightly from device to device but should be accurate
 238  * enough to give basic idea of battery life left and trigger
 239  * potential alerts.
 240  */
 241 static const int palmte_battery_sample[] = {
 242         2194, 2157, 2138, 2120,
 243         2104, 2089, 2075, 2061,
 244         2048, 2038, 2026, 2016,
 245         2008, 1998, 1989, 1980,
 246         1970, 1958, 1945, 1928,
 247         1910, 1888, 1860, 1827,
 248         1791, 1751, 1709, 1656,
 249 };
 250
 251 #define INTERVAL                10
 252 #define BATTERY_HIGH_TRESHOLD   66
 253 #define BATTERY_LOW_TRESHOLD    33
 254
 255 static void palmte_get_power_status(struct apm_power_info *info, int *battery)
 256 {
 257         int charging, batt, hi, lo, mid;
 258
 259         charging = !omap_get_gpio_datain(PALMTE_DC_GPIO);
 260         batt = battery[0];
 261         if (charging)
 262                 batt -= 60;
 263
 264         hi = ARRAY_SIZE(palmte_battery_sample);
 265         lo = 0;
 266
 267         info->battery_flag = 0;
 268         info->units = APM_UNITS_MINS;
 269
 270         if (batt > palmte_battery_sample[lo]) {
 271                 info->battery_life = 100;
 272                 info->time = INTERVAL * ARRAY_SIZE(palmte_battery_sample);
 273         } else if (batt <= palmte_battery_sample[hi - 1]) {
 274                 info->battery_life = 0;
 275                 info->time = 0;
 276         } else {
 277                 while (hi > lo + 1) {
 278                         mid = (hi + lo) >> 1;
 279                         if (batt <= palmte_battery_sample[mid])
 280                                 lo = mid;
 281                         else
 282                                 hi = mid;
 283                 }
 284
 285                 mid = palmte_battery_sample[lo] - palmte_battery_sample[hi];
 286                 hi = palmte_battery_sample[lo] - batt;
 287                 info->battery_life = 100 - (100 * lo + 100 * hi / mid) /
 288                         ARRAY_SIZE(palmte_battery_sample);
 289                 info->time = INTERVAL * (ARRAY_SIZE(palmte_battery_sample) -
 290                                 lo) - INTERVAL * hi / mid;
 291         }
 292
 293         if (charging) {
 294                 info->ac_line_status = APM_AC_ONLINE;
 295                 info->battery_status = APM_BATTERY_STATUS_CHARGING;
 296                 info->battery_flag |= APM_BATTERY_FLAG_CHARGING;
 297         } else {
 298                 info->ac_line_status = APM_AC_OFFLINE;
 299                 if (info->battery_life > BATTERY_HIGH_TRESHOLD)
 300                         info->battery_status = APM_BATTERY_STATUS_HIGH;
 301                 else if (info->battery_life > BATTERY_LOW_TRESHOLD)
 302                         info->battery_status = APM_BATTERY_STATUS_LOW;
 303                 else
 304                         info->battery_status = APM_BATTERY_STATUS_CRITICAL;
 305         }
 306
 307         if (info->battery_life > BATTERY_HIGH_TRESHOLD)
 308                 info->battery_flag |= APM_BATTERY_FLAG_HIGH;
 309         else if (info->battery_life > BATTERY_LOW_TRESHOLD)
 310                 info->battery_flag |= APM_BATTERY_FLAG_LOW;
 311         else
 312                 info->battery_flag |= APM_BATTERY_FLAG_CRITICAL;
 313 }
 314 #else
 315 #define palmte_get_power_status NULL
 316 #endif
 317
 318 static struct tsc2102_config palmte_tsc2102_config = {
 319         .use_internal   = 0,
 320         .monitor        = TSC_BAT1 | TSC_AUX | TSC_TEMP,
 321         .temp_at25c     = { 2200, 2615 },
 322         .apm_report     = palmte_get_power_status,
 323         .alsa_config    = &palmte_alsa_config,
 324 };
 325
 326 static struct omap_board_config_kernel palmte_config[] __initdata = {
 327         { OMAP_TAG_USB,         &palmte_usb_config },
 328         { OMAP_TAG_MMC,         &palmte_mmc_config },
 329         { OMAP_TAG_LCD,         &palmte_lcd_config },
 330         { OMAP_TAG_UART,        &palmte_uart_config },
 331 };
 332
 333 static struct spi_board_info palmte_spi_info[] __initdata = {
 334         {
 335                 .modalias       = "tsc2102",
 336                 .bus_num        = 2,    /* uWire (officially) */
 337                 .chip_select    = 0,    /* As opposed to 3 */
 338                 .irq            = OMAP_GPIO_IRQ(PALMTE_PINTDAV_GPIO),
 339                 .platform_data  = &palmte_tsc2102_config,
 340                 .max_speed_hz   = 8000000,
 341         },
 342 };
 343
 344 static void palmte_headphones_detect(void *data, int state)
 345 {
 346         if (state) {
 347                 /* Headphones connected, disable speaker */
 348                 omap_set_gpio_dataout(PALMTE_SPEAKER_GPIO, 0);
 349                 printk(KERN_INFO "PM: speaker off\n");
 350         } else {
 351                 /* Headphones unplugged, re-enable speaker */
 352                 omap_set_gpio_dataout(PALMTE_SPEAKER_GPIO, 1);
 353                 printk(KERN_INFO "PM: speaker on\n");
 354         }
 355 }
 356
 357 static void __init palmte_misc_gpio_setup(void)
 358 {
 359         /* Set TSC2102 PINTDAV pin as input (used by TSC2102 driver) */
 360         if (omap_request_gpio(PALMTE_PINTDAV_GPIO)) {
 361                 printk(KERN_ERR "Could not reserve PINTDAV GPIO!\n");
 362                 return;
 363         }
 364         omap_set_gpio_direction(PALMTE_PINTDAV_GPIO, 1);
 365
 366         /* Set USB-or-DC-IN pin as input (unused) */
 367         if (omap_request_gpio(PALMTE_USB_OR_DC_GPIO)) {
 368                 printk(KERN_ERR "Could not reserve cable signal GPIO!\n");
 369                 return;
 370         }
 371         omap_set_gpio_direction(PALMTE_USB_OR_DC_GPIO, 1);
 372 }
 373
 374 static void __init omap_palmte_init(void)
 375 {
 376         omap_board_config = palmte_config;
 377         omap_board_config_size = ARRAY_SIZE(palmte_config);
 378
 379         platform_add_devices(palmte_devices, ARRAY_SIZE(palmte_devices));
 380
 381         spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info));
 382         palmte_misc_gpio_setup();
 383         omap_serial_init();
 384         omap_register_i2c_bus(1, 100, NULL, 0);
 385 }
 386
 387 static void __init omap_palmte_map_io(void)
 388 {
 389         omap1_map_common_io();
 390 }
 391
 392 MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
 393         .phys_io        = 0xfff00000,
 394         .io_pg_offst    = ((0xfef00000) >> 18) & 0xfffc,
 395         .boot_params    = 0x10000100,
 396         .map_io         = omap_palmte_map_io,
 397         .init_irq       = omap_palmte_init_irq,
 398         .init_machine   = omap_palmte_init,
 399         .timer          = &omap_timer,
 400 MACHINE_END