arch/arm/mach-omap1/board-innovator.c

   1 /*
   2  * linux/arch/arm/mach-omap1/board-innovator.c
   3  *
   4  * Board specific inits for OMAP-1510 and OMAP-1610 Innovator
   5  *
   6  * Copyright (C) 2001 RidgeRun, Inc.
   7  * Author: Greg Lonnon <glonnon@ridgerun.com>
   8  *
   9  * Copyright (C) 2002 MontaVista Software, Inc.
  10  *
  11  * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
  12  * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
  13  *
  14  * This program is free software; you can redistribute it and/or modify
  15  * it under the terms of the GNU General Public License version 2 as
  16  * published by the Free Software Foundation.
  17  */
  18
  19 #include <linux/kernel.h>
  20 #include <linux/init.h>
  21 #include <linux/device.h>
  22 #include <linux/delay.h>
  23 #include <linux/mtd/mtd.h>
  24 #include <linux/mtd/partitions.h>
  25
  26 #include <asm/hardware.h>
  27 #include <asm/mach-types.h>
  28 #include <asm/mach/arch.h>
  29 #include <asm/mach/flash.h>
  30 #include <asm/mach/map.h>
  31
  32 #include <asm/arch/mux.h>
  33 #include <asm/arch/fpga.h>
  34 #include <asm/arch/gpio.h>
  35 #include <asm/arch/tc.h>
  36 #include <asm/arch/usb.h>
  37 #include <asm/arch/common.h>
  38
  39 static int __initdata innovator_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
  40
  41 static struct mtd_partition innovator_partitions[] = {
  42         /* bootloader (U-Boot, etc) in first sector */
  43         {
  44               .name             = "bootloader",
  45               .offset           = 0,
  46               .size             = SZ_128K,
  47               .mask_flags       = MTD_WRITEABLE, /* force read-only */
  48         },
  49         /* bootloader params in the next sector */
  50         {
  51               .name             = "params",
  52               .offset           = MTDPART_OFS_APPEND,
  53               .size             = SZ_128K,
  54               .mask_flags       = 0,
  55         },
  56         /* kernel */
  57         {
  58               .name             = "kernel",
  59               .offset           = MTDPART_OFS_APPEND,
  60               .size             = SZ_2M,
  61               .mask_flags       = 0
  62         },
  63         /* rest of flash1 is a file system */
  64         {
  65               .name             = "rootfs",
  66               .offset           = MTDPART_OFS_APPEND,
  67               .size             = SZ_16M - SZ_2M - 2 * SZ_128K,
  68               .mask_flags       = 0
  69         },
  70         /* file system */
  71         {
  72               .name             = "filesystem",
  73               .offset           = MTDPART_OFS_APPEND,
  74               .size             = MTDPART_SIZ_FULL,
  75               .mask_flags       = 0
  76         }
  77 };
  78
  79 static struct flash_platform_data innovator_flash_data = {
  80         .map_name       = "cfi_probe",
  81         .width          = 2,
  82         .parts          = innovator_partitions,
  83         .nr_parts       = ARRAY_SIZE(innovator_partitions),
  84 };
  85
  86 static struct resource innovator_flash_resource = {
  87         .start          = OMAP_CS0_PHYS,
  88         .end            = OMAP_CS0_PHYS + SZ_32M - 1,
  89         .flags          = IORESOURCE_MEM,
  90 };
  91
  92 static struct platform_device innovator_flash_device = {
  93         .name           = "omapflash",
  94         .id             = 0,
  95         .dev            = {
  96                 .platform_data  = &innovator_flash_data,
  97         },
  98         .num_resources  = 1,
  99         .resource       = &innovator_flash_resource,
 100 };
 101
 102 #ifdef CONFIG_ARCH_OMAP1510
 103
 104 /* Only FPGA needs to be mapped here. All others are done with ioremap */
 105 static struct map_desc innovator1510_io_desc[] __initdata = {
 106 { OMAP1510_FPGA_BASE, OMAP1510_FPGA_START, OMAP1510_FPGA_SIZE,
 107         MT_DEVICE },
 108 };
 109
 110 static struct resource innovator1510_smc91x_resources[] = {
 111         [0] = {
 112                 .start  = OMAP1510_FPGA_ETHR_START,     /* Physical */
 113                 .end    = OMAP1510_FPGA_ETHR_START + 0xf,
 114                 .flags  = IORESOURCE_MEM,
 115         },
 116         [1] = {
 117                 .start  = OMAP1510_INT_ETHER,
 118                 .end    = OMAP1510_INT_ETHER,
 119                 .flags  = IORESOURCE_IRQ,
 120         },
 121 };
 122
 123 static struct platform_device innovator1510_smc91x_device = {
 124         .name           = "smc91x",
 125         .id             = 0,
 126         .num_resources  = ARRAY_SIZE(innovator1510_smc91x_resources),
 127         .resource       = innovator1510_smc91x_resources,
 128 };
 129
 130 static struct platform_device *innovator1510_devices[] __initdata = {
 131         &innovator_flash_device,
 132         &innovator1510_smc91x_device,
 133 };
 134
 135 #endif /* CONFIG_ARCH_OMAP1510 */
 136
 137 #ifdef CONFIG_ARCH_OMAP16XX
 138
 139 static struct resource innovator1610_smc91x_resources[] = {
 140         [0] = {
 141                 .start  = INNOVATOR1610_ETHR_START,             /* Physical */
 142                 .end    = INNOVATOR1610_ETHR_START + 0xf,
 143                 .flags  = IORESOURCE_MEM,
 144         },
 145         [1] = {
 146                 .start  = OMAP_GPIO_IRQ(0),
 147                 .end    = OMAP_GPIO_IRQ(0),
 148                 .flags  = IORESOURCE_IRQ,
 149         },
 150 };
 151
 152 static struct platform_device innovator1610_smc91x_device = {
 153         .name           = "smc91x",
 154         .id             = 0,
 155         .num_resources  = ARRAY_SIZE(innovator1610_smc91x_resources),
 156         .resource       = innovator1610_smc91x_resources,
 157 };
 158
 159 static struct platform_device *innovator1610_devices[] __initdata = {
 160         &innovator_flash_device,
 161         &innovator1610_smc91x_device,
 162 };
 163
 164 #endif /* CONFIG_ARCH_OMAP16XX */
 165
 166 static void __init innovator_init_smc91x(void)
 167 {
 168         if (cpu_is_omap1510()) {
 169                 fpga_write(fpga_read(OMAP1510_FPGA_RST) & ~1,
 170                            OMAP1510_FPGA_RST);
 171                 udelay(750);
 172         } else {
 173                 if ((omap_request_gpio(0)) < 0) {
 174                         printk("Error requesting gpio 0 for smc91x irq\n");
 175                         return;
 176                 }
 177         }
 178 }
 179
 180 void innovator_init_irq(void)
 181 {
 182         omap_init_irq();
 183         omap_gpio_init();
 184 #ifdef CONFIG_ARCH_OMAP1510
 185         if (cpu_is_omap1510()) {
 186                 omap1510_fpga_init_irq();
 187         }
 188 #endif
 189         innovator_init_smc91x();
 190 }
 191
 192 #ifdef CONFIG_ARCH_OMAP1510
 193 static struct omap_usb_config innovator1510_usb_config __initdata = {
 194         /* for bundled non-standard host and peripheral cables */
 195         .hmc_mode       = 4,
 196
 197         .register_host  = 1,
 198         .pins[1]        = 6,
 199         .pins[2]        = 6,            /* Conflicts with UART2 */
 200
 201         .register_dev   = 1,
 202         .pins[0]        = 2,
 203 };
 204 #endif
 205
 206 #ifdef CONFIG_ARCH_OMAP16XX
 207 static struct omap_usb_config h2_usb_config __initdata = {
 208         /* usb1 has a Mini-AB port and external isp1301 transceiver */
 209         .otg            = 2,
 210
 211 #ifdef  CONFIG_USB_GADGET_OMAP
 212         .hmc_mode       = 19,   // 0:host(off) 1:dev|otg 2:disabled
 213         // .hmc_mode    = 21,   // 0:host(off) 1:dev(loopback) 2:host(loopback)
 214 #elif   defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 215         /* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */
 216         .hmc_mode       = 20,   // 1:dev|otg(off) 1:host 2:disabled
 217 #endif
 218
 219         .pins[1]        = 3,
 220 };
 221 #endif
 222
 223 static struct omap_mmc_config innovator_mmc_config __initdata = {
 224         .mmc [0] = {
 225                 .enabled        = 1,
 226                 .wire4          = 1,
 227                 .wp_pin         = OMAP_MPUIO(3),
 228                 .power_pin      = -1,   /* FPGA F3 UIO42 */
 229                 .switch_pin     = -1,   /* FPGA F4 UIO43 */
 230         },
 231 };
 232
 233 static struct omap_board_config_kernel innovator_config[] = {
 234         { OMAP_TAG_USB,         NULL },
 235         { OMAP_TAG_MMC,         &innovator_mmc_config },
 236 };
 237
 238 static void __init innovator_init(void)
 239 {
 240 #ifdef CONFIG_ARCH_OMAP1510
 241         if (cpu_is_omap1510()) {
 242                 platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices));
 243         }
 244 #endif
 245 #ifdef CONFIG_ARCH_OMAP16XX
 246         if (!cpu_is_omap1510()) {
 247                 platform_add_devices(innovator1610_devices, ARRAY_SIZE(innovator1610_devices));
 248         }
 249 #endif
 250
 251 #ifdef CONFIG_ARCH_OMAP1510
 252         if (cpu_is_omap1510())
 253                 innovator_config[0].data = &innovator1510_usb_config;
 254 #endif
 255 #ifdef CONFIG_ARCH_OMAP16XX
 256         if (cpu_is_omap1610())
 257                 innovator_config[0].data = &h2_usb_config;
 258 #endif
 259         omap_board_config = innovator_config;
 260         omap_board_config_size = ARRAY_SIZE(innovator_config);
 261 }
 262
 263 static void __init innovator_map_io(void)
 264 {
 265         omap_map_common_io();
 266
 267 #ifdef CONFIG_ARCH_OMAP1510
 268         if (cpu_is_omap1510()) {
 269                 iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc));
 270                 udelay(10);     /* Delay needed for FPGA */
 271
 272                 /* Dump the Innovator FPGA rev early - useful info for support. */
 273                 printk("Innovator FPGA Rev %d.%d Board Rev %d\n",
 274                        fpga_read(OMAP1510_FPGA_REV_HIGH),
 275                        fpga_read(OMAP1510_FPGA_REV_LOW),
 276                        fpga_read(OMAP1510_FPGA_BOARD_REV));
 277         }
 278 #endif
 279         omap_serial_init(innovator_serial_ports);
 280 }
 281
 282 MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
 283         /* Maintainer: MontaVista Software, Inc. */
 284         .phys_ram       = 0x10000000,
 285         .phys_io        = 0xfff00000,
 286         .io_pg_offst    = ((0xfef00000) >> 18) & 0xfffc,
 287         .boot_params    = 0x10000100,
 288         .map_io         = innovator_map_io,
 289         .init_irq       = innovator_init_irq,
 290         .init_machine   = innovator_init,
 291         .timer          = &omap_timer,
 292 MACHINE_END