arch/arm/mach-omap1/board-h3.c

   1 /*
   2  * linux/arch/arm/mach-omap1/board-h3.c
   3  *
   4  * This file contains OMAP1710 H3 specific code.
   5  *
   6  * Copyright (C) 2004 Texas Instruments, Inc.
   7  * Copyright (C) 2002 MontaVista Software, Inc.
   8  * Copyright (C) 2001 RidgeRun, Inc.
   9  * Author: RidgeRun, Inc.
  10  *         Greg Lonnon (glonnon@ridgerun.com) or info@ridgerun.com
  11  *
  12  * This program is free software; you can redistribute it and/or modify
  13  * it under the terms of the GNU General Public License version 2 as
  14  * published by the Free Software Foundation.
  15  */
  16
  17 #include <linux/types.h>
  18 #include <linux/init.h>
  19 #include <linux/major.h>
  20 #include <linux/kernel.h>
  21 #include <linux/platform_device.h>
  22 #include <linux/errno.h>
  23 #include <linux/workqueue.h>
  24 #include <linux/i2c.h>
  25 #include <linux/mtd/mtd.h>
  26 #include <linux/mtd/nand.h>
  27 #include <linux/mtd/partitions.h>
  28 #include <linux/input.h>
  29 #include <linux/spi/spi.h>
  30 #include <linux/i2c/tps65010.h>
  31
  32 #include <asm/setup.h>
  33 #include <asm/page.h>
  34 #include <mach/hardware.h>
  35 #include <asm/gpio.h>
  36
  37 #include <asm/mach-types.h>
  38 #include <asm/mach/arch.h>
  39 #include <asm/mach/flash.h>
  40 #include <asm/mach/map.h>
  41
  42 #include <mach/gpioexpander.h>
  43 #include <mach/irqs.h>
  44 #include <mach/mux.h>
  45 #include <mach/tc.h>
  46 #include <mach/nand.h>
  47 #include <mach/irda.h>
  48 #include <mach/usb.h>
  49 #include <mach/keypad.h>
  50 #include <mach/dma.h>
  51 #include <mach/common.h>
  52
  53 #define H3_TS_GPIO      48
  54
  55 static int h3_keymap[] = {
  56         KEY(0, 0, KEY_LEFT),
  57         KEY(0, 1, KEY_RIGHT),
  58         KEY(0, 2, KEY_3),
  59         KEY(0, 3, KEY_F10),
  60         KEY(0, 4, KEY_F5),
  61         KEY(0, 5, KEY_9),
  62         KEY(1, 0, KEY_DOWN),
  63         KEY(1, 1, KEY_UP),
  64         KEY(1, 2, KEY_2),
  65         KEY(1, 3, KEY_F9),
  66         KEY(1, 4, KEY_F7),
  67         KEY(1, 5, KEY_0),
  68         KEY(2, 0, KEY_ENTER),
  69         KEY(2, 1, KEY_6),
  70         KEY(2, 2, KEY_1),
  71         KEY(2, 3, KEY_F2),
  72         KEY(2, 4, KEY_F6),
  73         KEY(2, 5, KEY_HOME),
  74         KEY(3, 0, KEY_8),
  75         KEY(3, 1, KEY_5),
  76         KEY(3, 2, KEY_F12),
  77         KEY(3, 3, KEY_F3),
  78         KEY(3, 4, KEY_F8),
  79         KEY(3, 5, KEY_END),
  80         KEY(4, 0, KEY_7),
  81         KEY(4, 1, KEY_4),
  82         KEY(4, 2, KEY_F11),
  83         KEY(4, 3, KEY_F1),
  84         KEY(4, 4, KEY_F4),
  85         KEY(4, 5, KEY_ESC),
  86         KEY(5, 0, KEY_F13),
  87         KEY(5, 1, KEY_F14),
  88         KEY(5, 2, KEY_F15),
  89         KEY(5, 3, KEY_F16),
  90         KEY(5, 4, KEY_SLEEP),
  91         0
  92 };
  93
  94
  95 static struct mtd_partition nor_partitions[] = {
  96         /* bootloader (U-Boot, etc) in first sector */
  97         {
  98               .name             = "bootloader",
  99               .offset           = 0,
 100               .size             = SZ_128K,
 101               .mask_flags       = MTD_WRITEABLE, /* force read-only */
 102         },
 103         /* bootloader params in the next sector */
 104         {
 105               .name             = "params",
 106               .offset           = MTDPART_OFS_APPEND,
 107               .size             = SZ_128K,
 108               .mask_flags       = 0,
 109         },
 110         /* kernel */
 111         {
 112               .name             = "kernel",
 113               .offset           = MTDPART_OFS_APPEND,
 114               .size             = SZ_2M,
 115               .mask_flags       = 0
 116         },
 117         /* file system */
 118         {
 119               .name             = "filesystem",
 120               .offset           = MTDPART_OFS_APPEND,
 121               .size             = MTDPART_SIZ_FULL,
 122               .mask_flags       = 0
 123         }
 124 };
 125
 126 static struct flash_platform_data nor_data = {
 127         .map_name       = "cfi_probe",
 128         .width          = 2,
 129         .parts          = nor_partitions,
 130         .nr_parts       = ARRAY_SIZE(nor_partitions),
 131 };
 132
 133 static struct resource nor_resource = {
 134         /* This is on CS3, wherever it's mapped */
 135         .flags          = IORESOURCE_MEM,
 136 };
 137
 138 static struct platform_device nor_device = {
 139         .name           = "omapflash",
 140         .id             = 0,
 141         .dev            = {
 142                 .platform_data  = &nor_data,
 143         },
 144         .num_resources  = 1,
 145         .resource       = &nor_resource,
 146 };
 147
 148 static struct mtd_partition nand_partitions[] = {
 149 #if 0
 150         /* REVISIT: enable these partitions if you make NAND BOOT work */
 151         {
 152                 .name           = "xloader",
 153                 .offset         = 0,
 154                 .size           = 64 * 1024,
 155                 .mask_flags     = MTD_WRITEABLE,        /* force read-only */
 156         },
 157         {
 158                 .name           = "bootloader",
 159                 .offset         = MTDPART_OFS_APPEND,
 160                 .size           = 256 * 1024,
 161                 .mask_flags     = MTD_WRITEABLE,        /* force read-only */
 162         },
 163         {
 164                 .name           = "params",
 165                 .offset         = MTDPART_OFS_APPEND,
 166                 .size           = 192 * 1024,
 167         },
 168         {
 169                 .name           = "kernel",
 170                 .offset         = MTDPART_OFS_APPEND,
 171                 .size           = 2 * SZ_1M,
 172         },
 173 #endif
 174         {
 175                 .name           = "filesystem",
 176                 .size           = MTDPART_SIZ_FULL,
 177                 .offset         = MTDPART_OFS_APPEND,
 178         },
 179 };
 180
 181 /* dip switches control NAND chip access:  8 bit, 16 bit, or neither */
 182 static struct omap_nand_platform_data nand_data = {
 183         .options        = NAND_SAMSUNG_LP_OPTIONS,
 184         .parts          = nand_partitions,
 185         .nr_parts       = ARRAY_SIZE(nand_partitions),
 186 };
 187
 188 static struct resource nand_resource = {
 189         .flags          = IORESOURCE_MEM,
 190 };
 191
 192 static struct platform_device nand_device = {
 193         .name           = "omapnand",
 194         .id             = 0,
 195         .dev            = {
 196                 .platform_data  = &nand_data,
 197         },
 198         .num_resources  = 1,
 199         .resource       = &nand_resource,
 200 };
 201
 202 static struct resource smc91x_resources[] = {
 203         [0] = {
 204                 .start  = OMAP1710_ETHR_START,          /* Physical */
 205                 .end    = OMAP1710_ETHR_START + 0xf,
 206                 .flags  = IORESOURCE_MEM,
 207         },
 208         [1] = {
 209                 .start  = OMAP_GPIO_IRQ(40),
 210                 .end    = OMAP_GPIO_IRQ(40),
 211                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
 212         },
 213 };
 214
 215 static struct platform_device smc91x_device = {
 216         .name           = "smc91x",
 217         .id             = 0,
 218         .num_resources  = ARRAY_SIZE(smc91x_resources),
 219         .resource       = smc91x_resources,
 220 };
 221
 222 #define GPTIMER_BASE            0xFFFB1400
 223 #define GPTIMER_REGS(x) (0xFFFB1400 + (x * 0x800))
 224 #define GPTIMER_REGS_SIZE       0x46
 225
 226 static struct resource intlat_resources[] = {
 227         [0] = {
 228                 .start  = GPTIMER_REGS(0),            /* Physical */
 229                 .end    = GPTIMER_REGS(0) + GPTIMER_REGS_SIZE,
 230                 .flags  = IORESOURCE_MEM,
 231         },
 232         [1] = {
 233                 .start  = INT_1610_GPTIMER1,
 234                 .end    = INT_1610_GPTIMER1,
 235                 .flags  = IORESOURCE_IRQ,
 236         },
 237 };
 238
 239 static struct platform_device intlat_device = {
 240         .name      = "omap_intlat",
 241         .id          = 0,
 242         .num_resources  = ARRAY_SIZE(intlat_resources),
 243         .resource       = intlat_resources,
 244 };
 245
 246 static struct resource h3_kp_resources[] = {
 247         [0] = {
 248                 .start  = INT_KEYBOARD,
 249                 .end    = INT_KEYBOARD,
 250                 .flags  = IORESOURCE_IRQ,
 251         },
 252 };
 253
 254 static struct omap_kp_platform_data h3_kp_data = {
 255         .rows           = 8,
 256         .cols           = 8,
 257         .keymap         = h3_keymap,
 258         .keymapsize     = ARRAY_SIZE(h3_keymap),
 259         .rep            = 1,
 260         .delay          = 9,
 261         .dbounce        = 1,
 262 };
 263
 264 static struct platform_device h3_kp_device = {
 265         .name           = "omap-keypad",
 266         .id             = -1,
 267         .dev            = {
 268                 .platform_data = &h3_kp_data,
 269         },
 270         .num_resources  = ARRAY_SIZE(h3_kp_resources),
 271         .resource       = h3_kp_resources,
 272 };
 273
 274
 275 /* Select between the IrDA and aGPS module
 276  */
 277 static int h3_select_irda(struct device *dev, int state)
 278 {
 279         unsigned char expa;
 280         int err = 0;
 281
 282         if ((err = read_gpio_expa(&expa, 0x26))) {
 283                 printk(KERN_ERR "Error reading from I/O EXPANDER \n");
 284                 return err;
 285         }
 286
 287         /* 'P6' enable/disable IRDA_TX and IRDA_RX */
 288         if (state & IR_SEL) { /* IrDA */
 289                 if ((err = write_gpio_expa(expa | 0x40, 0x26))) {
 290                         printk(KERN_ERR "Error writing to I/O EXPANDER \n");
 291                         return err;
 292                 }
 293         } else {
 294                 if ((err = write_gpio_expa(expa & ~0x40, 0x26))) {
 295                         printk(KERN_ERR "Error writing to I/O EXPANDER \n");
 296                         return err;
 297                 }
 298         }
 299         return err;
 300 }
 301
 302 static void set_trans_mode(struct work_struct *work)
 303 {
 304         struct omap_irda_config *irda_config =
 305                 container_of(work, struct omap_irda_config, gpio_expa.work);
 306         int mode = irda_config->mode;
 307         unsigned char expa;
 308         int err = 0;
 309
 310         if ((err = read_gpio_expa(&expa, 0x27)) != 0) {
 311                 printk(KERN_ERR "Error reading from I/O expander\n");
 312         }
 313
 314         expa &= ~0x03;
 315
 316         if (mode & IR_SIRMODE) {
 317                 expa |= 0x01;
 318         } else { /* MIR/FIR */
 319                 expa |= 0x03;
 320         }
 321
 322         if ((err = write_gpio_expa(expa, 0x27)) != 0) {
 323                 printk(KERN_ERR "Error writing to I/O expander\n");
 324         }
 325 }
 326
 327 static int h3_transceiver_mode(struct device *dev, int mode)
 328 {
 329         struct omap_irda_config *irda_config = dev->platform_data;
 330
 331         irda_config->mode = mode;
 332         cancel_delayed_work(&irda_config->gpio_expa);
 333         PREPARE_DELAYED_WORK(&irda_config->gpio_expa, set_trans_mode);
 334         schedule_delayed_work(&irda_config->gpio_expa, 0);
 335
 336         return 0;
 337 }
 338
 339 static struct omap_irda_config h3_irda_data = {
 340         .transceiver_cap        = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE,
 341         .transceiver_mode       = h3_transceiver_mode,
 342         .select_irda            = h3_select_irda,
 343         .rx_channel             = OMAP_DMA_UART3_RX,
 344         .tx_channel             = OMAP_DMA_UART3_TX,
 345         .dest_start             = UART3_THR,
 346         .src_start              = UART3_RHR,
 347         .tx_trigger             = 0,
 348         .rx_trigger             = 0,
 349 };
 350
 351 static struct resource h3_irda_resources[] = {
 352         [0] = {
 353                 .start  = INT_UART3,
 354                 .end    = INT_UART3,
 355                 .flags  = IORESOURCE_IRQ,
 356         },
 357 };
 358
 359 static u64 irda_dmamask = 0xffffffff;
 360
 361 static struct platform_device h3_irda_device = {
 362         .name           = "omapirda",
 363         .id             = 0,
 364         .dev            = {
 365                 .platform_data  = &h3_irda_data,
 366                 .dma_mask       = &irda_dmamask,
 367         },
 368         .num_resources  = ARRAY_SIZE(h3_irda_resources),
 369         .resource       = h3_irda_resources,
 370 };
 371
 372 static struct platform_device h3_lcd_device = {
 373         .name           = "lcd_h3",
 374         .id             = -1,
 375 };
 376
 377 static struct spi_board_info h3_spi_board_info[] __initdata = {
 378         [0] = {
 379                 .modalias       = "tsc2101",
 380                 .bus_num        = 2,
 381                 .chip_select    = 0,
 382                 .irq            = OMAP_GPIO_IRQ(H3_TS_GPIO),
 383                 .max_speed_hz   = 16000000,
 384                 /* .platform_data       = &tsc_platform_data, */
 385         },
 386 };
 387
 388 static struct platform_device *devices[] __initdata = {
 389         &nor_device,
 390         &nand_device,
 391         &smc91x_device,
 392         &intlat_device,
 393         &h3_irda_device,
 394         &h3_kp_device,
 395         &h3_lcd_device,
 396 };
 397
 398 static struct omap_usb_config h3_usb_config __initdata = {
 399         /* usb1 has a Mini-AB port and external isp1301 transceiver */
 400         .otg        = 2,
 401
 402 #ifdef CONFIG_USB_GADGET_OMAP
 403         .hmc_mode       = 19,   /* 0:host(off) 1:dev|otg 2:disabled */
 404 #elif  defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 405         /* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */
 406         .hmc_mode       = 20,   /* 1:dev|otg(off) 1:host 2:disabled */
 407 #endif
 408
 409         .pins[1]        = 3,
 410 };
 411
 412 static struct omap_uart_config h3_uart_config __initdata = {
 413         .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
 414 };
 415
 416 static struct omap_lcd_config h3_lcd_config __initdata = {
 417         .ctrl_name      = "internal",
 418 };
 419
 420 static struct omap_board_config_kernel h3_config[] __initdata = {
 421         { OMAP_TAG_USB,         &h3_usb_config },
 422         { OMAP_TAG_UART,        &h3_uart_config },
 423         { OMAP_TAG_LCD,         &h3_lcd_config },
 424 };
 425
 426 static struct i2c_board_info __initdata h3_i2c_board_info[] = {
 427        {
 428                 I2C_BOARD_INFO("tps65013", 0x48),
 429                /* .irq         = OMAP_GPIO_IRQ(??), */
 430        },
 431         {
 432                 I2C_BOARD_INFO("isp1301_omap", 0x2d),
 433                 .irq            = OMAP_GPIO_IRQ(14),
 434         },
 435 };
 436
 437 #define H3_NAND_RB_GPIO_PIN     10
 438
 439 static int nand_dev_ready(struct omap_nand_platform_data *data)
 440 {
 441         return gpio_get_value(H3_NAND_RB_GPIO_PIN);
 442 }
 443
 444 static void __init h3_init(void)
 445 {
 446         /* Here we assume the NOR boot config:  NOR on CS3 (possibly swapped
 447          * to address 0 by a dip switch), NAND on CS2B.  The NAND driver will
 448          * notice whether a NAND chip is enabled at probe time.
 449          *
 450          * H3 support NAND-boot, with a dip switch to put NOR on CS2B and NAND
 451          * (which on H2 may be 16bit) on CS3.  Try detecting that in code here,
 452          * to avoid probing every possible flash configuration...
 453          */
 454         nor_resource.end = nor_resource.start = omap_cs3_phys();
 455         nor_resource.end += SZ_32M - 1;
 456
 457         nand_resource.end = nand_resource.start = OMAP_CS2B_PHYS;
 458         nand_resource.end += SZ_4K - 1;
 459         if (gpio_request(H3_NAND_RB_GPIO_PIN, "NAND ready") < 0)
 460                 BUG();
 461         nand_data.dev_ready = nand_dev_ready;
 462
 463         /* GPIO10 Func_MUX_CTRL reg bit 29:27, Configure V2 to mode1 as GPIO */
 464         /* GPIO10 pullup/down register, Enable pullup on GPIO10 */
 465         omap_cfg_reg(V2_1710_GPIO10);
 466
 467         platform_add_devices(devices, ARRAY_SIZE(devices));
 468         spi_register_board_info(h3_spi_board_info,
 469                                 ARRAY_SIZE(h3_spi_board_info));
 470         omap_board_config = h3_config;
 471         omap_board_config_size = ARRAY_SIZE(h3_config);
 472         omap_serial_init();
 473         omap_register_i2c_bus(1, 100, h3_i2c_board_info,
 474                               ARRAY_SIZE(h3_i2c_board_info));
 475         h3_mmc_init();
 476 }
 477
 478 static void __init h3_init_smc91x(void)
 479 {
 480         omap_cfg_reg(W15_1710_GPIO40);
 481         if (gpio_request(40, "SMC91x irq") < 0) {
 482                 printk("Error requesting gpio 40 for smc91x irq\n");
 483                 return;
 484         }
 485 }
 486
 487 static void __init h3_init_irq(void)
 488 {
 489         omap1_init_common_hw();
 490         omap_init_irq();
 491         omap_gpio_init();
 492         h3_init_smc91x();
 493 }
 494
 495 static void __init h3_map_io(void)
 496 {
 497         omap1_map_common_io();
 498 }
 499
 500 MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
 501         /* Maintainer: Texas Instruments, Inc. */
 502         .phys_io        = 0xfff00000,
 503         .io_pg_offst    = ((0xfef00000) >> 18) & 0xfffc,
 504         .boot_params    = 0x10000100,
 505         .map_io         = h3_map_io,
 506         .init_irq       = h3_init_irq,
 507         .init_machine   = h3_init,
 508         .timer          = &omap_timer,
 509 MACHINE_END