2 * linux/arch/arm/mach-omap1/board-h2.c
4 * Board specific inits for OMAP-1610 H2
6 * Copyright (C) 2001 RidgeRun, Inc.
7 * Author: Greg Lonnon <glonnon@ridgerun.com>
9 * Copyright (C) 2002 MontaVista Software, Inc.
11 * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
12 * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
14 * H2 specific changes and cleanup
15 * Copyright (C) 2004 Nokia Corporation by Imre Deak <imre.deak@nokia.com>
17 * This program is free software; you can redistribute it and/or modify
18 * it under the terms of the GNU General Public License version 2 as
19 * published by the Free Software Foundation.
21 #include <linux/gpio.h>
22 #include <linux/kernel.h>
23 #include <linux/platform_device.h>
24 #include <linux/delay.h>
25 #include <linux/i2c.h>
26 #include <linux/mtd/mtd.h>
27 #include <linux/mtd/platnand.h>
28 #include <linux/mtd/physmap.h>
29 #include <linux/input.h>
30 #include <linux/mfd/tps65010.h>
31 #include <linux/smc91x.h>
32 #include <linux/omapfb.h>
33 #include <linux/platform_data/gpio-omap.h>
34 #include <linux/leds.h>
36 #include <asm/mach-types.h>
37 #include <asm/mach/arch.h>
38 #include <asm/mach/map.h>
41 #include <linux/omap-dma.h>
43 #include <linux/platform_data/keypad-omap.h>
46 #include <mach/hardware.h>
52 /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
53 #define OMAP1610_ETHR_START 0x04000300
55 static const unsigned int h2_keymap[] = {
93 static struct mtd_partition h2_nor_partitions[] = {
94 /* bootloader (U-Boot, etc) in first sector */
99 .mask_flags = MTD_WRITEABLE, /* force read-only */
101 /* bootloader params in the next sector */
104 .offset = MTDPART_OFS_APPEND,
111 .offset = MTDPART_OFS_APPEND,
117 .name = "filesystem",
118 .offset = MTDPART_OFS_APPEND,
119 .size = MTDPART_SIZ_FULL,
124 static struct physmap_flash_data h2_nor_data = {
126 .set_vpp = omap1_set_vpp,
127 .parts = h2_nor_partitions,
128 .nr_parts = ARRAY_SIZE(h2_nor_partitions),
131 static struct resource h2_nor_resource = {
132 /* This is on CS3, wherever it's mapped */
133 .flags = IORESOURCE_MEM,
136 static struct platform_device h2_nor_device = {
137 .name = "physmap-flash",
140 .platform_data = &h2_nor_data,
143 .resource = &h2_nor_resource,
146 static struct mtd_partition h2_nand_partitions[] = {
148 /* REVISIT: enable these partitions if you make NAND BOOT
149 * work on your H2 (rev C or newer); published versions of
150 * x-load only support P2 and H3.
156 .mask_flags = MTD_WRITEABLE, /* force read-only */
159 .name = "bootloader",
160 .offset = MTDPART_OFS_APPEND,
162 .mask_flags = MTD_WRITEABLE, /* force read-only */
166 .offset = MTDPART_OFS_APPEND,
171 .offset = MTDPART_OFS_APPEND,
176 .name = "filesystem",
177 .size = MTDPART_SIZ_FULL,
178 .offset = MTDPART_OFS_APPEND,
182 #define H2_NAND_RB_GPIO_PIN 62
184 static int h2_nand_dev_ready(struct nand_chip *chip)
186 return gpio_get_value(H2_NAND_RB_GPIO_PIN);
189 static struct platform_nand_data h2_nand_platdata = {
193 .nr_partitions = ARRAY_SIZE(h2_nand_partitions),
194 .partitions = h2_nand_partitions,
195 .options = NAND_SAMSUNG_LP_OPTIONS,
198 .cmd_ctrl = omap1_nand_cmd_ctl,
199 .dev_ready = h2_nand_dev_ready,
203 static struct resource h2_nand_resource = {
204 .flags = IORESOURCE_MEM,
207 static struct platform_device h2_nand_device = {
211 .platform_data = &h2_nand_platdata,
214 .resource = &h2_nand_resource,
217 static struct smc91x_platdata h2_smc91x_info = {
218 .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
219 .leda = RPC_LED_100_10,
220 .ledb = RPC_LED_TX_RX,
223 static struct resource h2_smc91x_resources[] = {
225 .start = OMAP1610_ETHR_START, /* Physical */
226 .end = OMAP1610_ETHR_START + 0xf,
227 .flags = IORESOURCE_MEM,
230 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
234 static struct platform_device h2_smc91x_device = {
238 .platform_data = &h2_smc91x_info,
240 .num_resources = ARRAY_SIZE(h2_smc91x_resources),
241 .resource = h2_smc91x_resources,
244 static struct resource h2_kp_resources[] = {
246 .start = INT_KEYBOARD,
248 .flags = IORESOURCE_IRQ,
252 static const struct matrix_keymap_data h2_keymap_data = {
254 .keymap_size = ARRAY_SIZE(h2_keymap),
257 static struct omap_kp_platform_data h2_kp_data = {
260 .keymap_data = &h2_keymap_data,
266 static struct platform_device h2_kp_device = {
267 .name = "omap-keypad",
270 .platform_data = &h2_kp_data,
272 .num_resources = ARRAY_SIZE(h2_kp_resources),
273 .resource = h2_kp_resources,
276 static const struct gpio_led h2_gpio_led_pins[] = {
279 .default_trigger = "heartbeat",
284 .default_trigger = "cpu0",
285 .gpio = OMAP_MPUIO(4),
289 static struct gpio_led_platform_data h2_gpio_led_data = {
290 .leds = h2_gpio_led_pins,
291 .num_leds = ARRAY_SIZE(h2_gpio_led_pins),
294 static struct platform_device h2_gpio_leds = {
298 .platform_data = &h2_gpio_led_data,
302 static struct platform_device *h2_devices[] __initdata = {
310 static void __init h2_init_smc91x(void)
312 if (gpio_request(0, "SMC91x irq") < 0) {
313 printk("Error requesting gpio 0 for smc91x irq\n");
318 static int tps_setup(struct i2c_client *client, void *context)
320 if (!IS_BUILTIN(CONFIG_TPS65010))
323 tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V |
324 TPS_LDO1_ENABLE | TPS_VLDO1_3_0V);
329 static struct tps65010_board tps_board = {
330 .base = H2_TPS_GPIO_BASE,
335 static struct i2c_board_info __initdata h2_i2c_board_info[] = {
337 I2C_BOARD_INFO("tps65010", 0x48),
338 .platform_data = &tps_board,
340 I2C_BOARD_INFO("isp1301_omap", 0x2d),
344 static struct omap_usb_config h2_usb_config __initdata = {
345 /* usb1 has a Mini-AB port and external isp1301 transceiver */
348 #if IS_ENABLED(CONFIG_USB_OMAP)
349 .hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */
350 /* .hmc_mode = 21,*/ /* 0:host(off) 1:dev(loopback) 2:host(loopback) */
351 #elif IS_ENABLED(CONFIG_USB_OHCI_HCD)
352 /* needs OTG cable, or NONSTANDARD (B-to-MiniB) */
353 .hmc_mode = 20, /* 1:dev|otg(off) 1:host 2:disabled */
359 static const struct omap_lcd_config h2_lcd_config __initconst = {
360 .ctrl_name = "internal",
363 static void __init h2_init(void)
367 /* Here we assume the NOR boot config: NOR on CS3 (possibly swapped
368 * to address 0 by a dip switch), NAND on CS2B. The NAND driver will
369 * notice whether a NAND chip is enabled at probe time.
371 * FIXME revC boards (and H3) support NAND-boot, with a dip switch to
372 * put NOR on CS2B and NAND (which on H2 may be 16bit) on CS3. Try
373 * detecting that in code here, to avoid probing every possible flash
376 h2_nor_resource.end = h2_nor_resource.start = omap_cs3_phys();
377 h2_nor_resource.end += SZ_32M - 1;
379 h2_nand_resource.end = h2_nand_resource.start = OMAP_CS2B_PHYS;
380 h2_nand_resource.end += SZ_4K - 1;
381 BUG_ON(gpio_request(H2_NAND_RB_GPIO_PIN, "NAND ready") < 0);
382 gpio_direction_input(H2_NAND_RB_GPIO_PIN);
384 omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
385 omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
387 /* MMC: card detect and WP */
388 /* omap_cfg_reg(U19_ARMIO1); */ /* CD */
389 omap_cfg_reg(BALLOUT_V8_ARMIO3); /* WP */
391 /* Mux pins for keypad */
392 omap_cfg_reg(F18_1610_KBC0);
393 omap_cfg_reg(D20_1610_KBC1);
394 omap_cfg_reg(D19_1610_KBC2);
395 omap_cfg_reg(E18_1610_KBC3);
396 omap_cfg_reg(C21_1610_KBC4);
397 omap_cfg_reg(G18_1610_KBR0);
398 omap_cfg_reg(F19_1610_KBR1);
399 omap_cfg_reg(H14_1610_KBR2);
400 omap_cfg_reg(E20_1610_KBR3);
401 omap_cfg_reg(E19_1610_KBR4);
402 omap_cfg_reg(N19_1610_KBR5);
404 /* GPIO based LEDs */
405 omap_cfg_reg(P18_1610_GPIO3);
406 omap_cfg_reg(MPUIO4);
408 h2_smc91x_resources[1].start = gpio_to_irq(0);
409 h2_smc91x_resources[1].end = gpio_to_irq(0);
410 platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
412 h2_i2c_board_info[0].irq = gpio_to_irq(58);
413 h2_i2c_board_info[1].irq = gpio_to_irq(2);
414 omap_register_i2c_bus(1, 100, h2_i2c_board_info,
415 ARRAY_SIZE(h2_i2c_board_info));
416 omap1_usb_init(&h2_usb_config);
419 omapfb_set_lcd_config(&h2_lcd_config);
422 MACHINE_START(OMAP_H2, "TI-H2")
423 /* Maintainer: Imre Deak <imre.deak@nokia.com> */
424 .atag_offset = 0x100,
425 .map_io = omap16xx_map_io,
426 .init_early = omap1_init_early,
427 .init_irq = omap1_init_irq,
428 .handle_irq = omap1_handle_irq,
429 .init_machine = h2_init,
430 .init_late = omap1_init_late,
431 .init_time = omap1_timer_init,
432 .restart = omap1_restart,