arch/arm/mach-omap1/board-fsample.c

   1 /*
   2  * linux/arch/arm/mach-omap1/board-fsample.c
   3  *
   4  * Modified from board-perseus2.c
   5  *
   6  * Original OMAP730 support by Jean Pihet <j-pihet@ti.com>
   7  * Updated for 2.6 by Kevin Hilman <kjh@hilman.org>
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License version 2 as
  11  * published by the Free Software Foundation.
  12  */
  13
  14 #include <linux/kernel.h>
  15 #include <linux/init.h>
  16 #include <linux/platform_device.h>
  17 #include <linux/delay.h>
  18 #include <linux/mtd/mtd.h>
  19 #include <linux/mtd/nand.h>
  20 #include <linux/mtd/partitions.h>
  21 #include <linux/input.h>
  22
  23 #include <mach/hardware.h>
  24 #include <asm/mach-types.h>
  25 #include <asm/mach/arch.h>
  26 #include <asm/mach/flash.h>
  27 #include <asm/mach/map.h>
  28
  29 #include <mach/tc.h>
  30 #include <mach/gpio.h>
  31 #include <mach/mux.h>
  32 #include <mach/fpga.h>
  33 #include <mach/nand.h>
  34 #include <mach/keypad.h>
  35 #include <mach/common.h>
  36 #include <mach/board.h>
  37
  38 /* fsample is pretty close to p2-sample */
  39
  40 #define fsample_cpld_read(reg) __raw_readb(reg)
  41 #define fsample_cpld_write(val, reg) __raw_writeb(val, reg)
  42
  43 #define FSAMPLE_CPLD_BASE    0xE8100000
  44 #define FSAMPLE_CPLD_SIZE    SZ_4K
  45 #define FSAMPLE_CPLD_START   0x05080000
  46
  47 #define FSAMPLE_CPLD_REG_A   (FSAMPLE_CPLD_BASE + 0x00)
  48 #define FSAMPLE_CPLD_SWITCH  (FSAMPLE_CPLD_BASE + 0x02)
  49 #define FSAMPLE_CPLD_UART    (FSAMPLE_CPLD_BASE + 0x02)
  50 #define FSAMPLE_CPLD_REG_B   (FSAMPLE_CPLD_BASE + 0x04)
  51 #define FSAMPLE_CPLD_VERSION (FSAMPLE_CPLD_BASE + 0x06)
  52 #define FSAMPLE_CPLD_SET_CLR (FSAMPLE_CPLD_BASE + 0x06)
  53
  54 #define FSAMPLE_CPLD_BIT_BT_RESET         0
  55 #define FSAMPLE_CPLD_BIT_LCD_RESET        1
  56 #define FSAMPLE_CPLD_BIT_CAM_PWDN         2
  57 #define FSAMPLE_CPLD_BIT_CHARGER_ENABLE   3
  58 #define FSAMPLE_CPLD_BIT_SD_MMC_EN        4
  59 #define FSAMPLE_CPLD_BIT_aGPS_PWREN       5
  60 #define FSAMPLE_CPLD_BIT_BACKLIGHT        6
  61 #define FSAMPLE_CPLD_BIT_aGPS_EN_RESET    7
  62 #define FSAMPLE_CPLD_BIT_aGPS_SLEEPx_N    8
  63 #define FSAMPLE_CPLD_BIT_OTG_RESET        9
  64
  65 #define fsample_cpld_set(bit) \
  66     fsample_cpld_write((((bit) & 15) << 4) | 0x0f, FSAMPLE_CPLD_SET_CLR)
  67
  68 #define fsample_cpld_clear(bit) \
  69     fsample_cpld_write(0xf0 | ((bit) & 15), FSAMPLE_CPLD_SET_CLR)
  70
  71 static int fsample_keymap[] = {
  72         KEY(0,0,KEY_UP),
  73         KEY(0,1,KEY_RIGHT),
  74         KEY(0,2,KEY_LEFT),
  75         KEY(0,3,KEY_DOWN),
  76         KEY(0,4,KEY_ENTER),
  77         KEY(1,0,KEY_F10),
  78         KEY(1,1,KEY_SEND),
  79         KEY(1,2,KEY_END),
  80         KEY(1,3,KEY_VOLUMEDOWN),
  81         KEY(1,4,KEY_VOLUMEUP),
  82         KEY(1,5,KEY_RECORD),
  83         KEY(2,0,KEY_F9),
  84         KEY(2,1,KEY_3),
  85         KEY(2,2,KEY_6),
  86         KEY(2,3,KEY_9),
  87         KEY(2,4,KEY_KPDOT),
  88         KEY(3,0,KEY_BACK),
  89         KEY(3,1,KEY_2),
  90         KEY(3,2,KEY_5),
  91         KEY(3,3,KEY_8),
  92         KEY(3,4,KEY_0),
  93         KEY(3,5,KEY_KPSLASH),
  94         KEY(4,0,KEY_HOME),
  95         KEY(4,1,KEY_1),
  96         KEY(4,2,KEY_4),
  97         KEY(4,3,KEY_7),
  98         KEY(4,4,KEY_KPASTERISK),
  99         KEY(4,5,KEY_POWER),
 100         0
 101 };
 102
 103 static struct resource smc91x_resources[] = {
 104         [0] = {
 105                 .start  = H2P2_DBG_FPGA_ETHR_START,     /* Physical */
 106                 .end    = H2P2_DBG_FPGA_ETHR_START + 0xf,
 107                 .flags  = IORESOURCE_MEM,
 108         },
 109         [1] = {
 110                 .start  = INT_730_MPU_EXT_NIRQ,
 111                 .end    = 0,
 112                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 113         },
 114 };
 115
 116 static struct mtd_partition nor_partitions[] = {
 117         /* bootloader (U-Boot, etc) in first sector */
 118         {
 119               .name             = "bootloader",
 120               .offset           = 0,
 121               .size             = SZ_128K,
 122               .mask_flags       = MTD_WRITEABLE, /* force read-only */
 123         },
 124         /* bootloader params in the next sector */
 125         {
 126               .name             = "params",
 127               .offset           = MTDPART_OFS_APPEND,
 128               .size             = SZ_128K,
 129               .mask_flags       = 0,
 130         },
 131         /* kernel */
 132         {
 133               .name             = "kernel",
 134               .offset           = MTDPART_OFS_APPEND,
 135               .size             = SZ_2M,
 136               .mask_flags       = 0
 137         },
 138         /* rest of flash is a file system */
 139         {
 140               .name             = "rootfs",
 141               .offset           = MTDPART_OFS_APPEND,
 142               .size             = MTDPART_SIZ_FULL,
 143               .mask_flags       = 0
 144         },
 145 };
 146
 147 static struct flash_platform_data nor_data = {
 148         .map_name       = "cfi_probe",
 149         .width          = 2,
 150         .parts          = nor_partitions,
 151         .nr_parts       = ARRAY_SIZE(nor_partitions),
 152 };
 153
 154 static struct resource nor_resource = {
 155         .start          = OMAP_CS0_PHYS,
 156         .end            = OMAP_CS0_PHYS + SZ_32M - 1,
 157         .flags          = IORESOURCE_MEM,
 158 };
 159
 160 static struct platform_device nor_device = {
 161         .name           = "omapflash",
 162         .id             = 0,
 163         .dev            = {
 164                 .platform_data  = &nor_data,
 165         },
 166         .num_resources  = 1,
 167         .resource       = &nor_resource,
 168 };
 169
 170 static struct omap_nand_platform_data nand_data = {
 171         .options        = NAND_SAMSUNG_LP_OPTIONS,
 172 };
 173
 174 static struct resource nand_resource = {
 175         .start          = OMAP_CS3_PHYS,
 176         .end            = OMAP_CS3_PHYS + SZ_4K - 1,
 177         .flags          = IORESOURCE_MEM,
 178 };
 179
 180 static struct platform_device nand_device = {
 181         .name           = "omapnand",
 182         .id             = 0,
 183         .dev            = {
 184                 .platform_data  = &nand_data,
 185         },
 186         .num_resources  = 1,
 187         .resource       = &nand_resource,
 188 };
 189
 190 static struct platform_device smc91x_device = {
 191         .name           = "smc91x",
 192         .id             = 0,
 193         .num_resources  = ARRAY_SIZE(smc91x_resources),
 194         .resource       = smc91x_resources,
 195 };
 196
 197 static struct resource kp_resources[] = {
 198         [0] = {
 199                 .start  = INT_730_MPUIO_KEYPAD,
 200                 .end    = INT_730_MPUIO_KEYPAD,
 201                 .flags  = IORESOURCE_IRQ,
 202         },
 203 };
 204
 205 static struct omap_kp_platform_data kp_data = {
 206         .rows           = 8,
 207         .cols           = 8,
 208         .keymap         = fsample_keymap,
 209         .keymapsize     = ARRAY_SIZE(fsample_keymap),
 210         .delay          = 4,
 211 };
 212
 213 static struct platform_device kp_device = {
 214         .name           = "omap-keypad",
 215         .id             = -1,
 216         .dev            = {
 217                 .platform_data = &kp_data,
 218         },
 219         .num_resources  = ARRAY_SIZE(kp_resources),
 220         .resource       = kp_resources,
 221 };
 222
 223 static struct platform_device lcd_device = {
 224         .name           = "lcd_p2",
 225         .id             = -1,
 226 };
 227
 228 static struct platform_device *devices[] __initdata = {
 229         &nor_device,
 230         &nand_device,
 231         &smc91x_device,
 232         &kp_device,
 233         &lcd_device,
 234 };
 235
 236 #define P2_NAND_RB_GPIO_PIN     62
 237
 238 static int nand_dev_ready(struct omap_nand_platform_data *data)
 239 {
 240         return gpio_get_value(P2_NAND_RB_GPIO_PIN);
 241 }
 242
 243 static struct omap_lcd_config fsample_lcd_config __initdata = {
 244         .ctrl_name      = "internal",
 245 };
 246
 247 static struct omap_board_config_kernel fsample_config[] = {
 248         { OMAP_TAG_LCD,         &fsample_lcd_config },
 249 };
 250
 251 static void __init omap_fsample_init(void)
 252 {
 253         if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0)
 254                 BUG();
 255         nand_data.dev_ready = nand_dev_ready;
 256
 257         omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
 258         omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
 259
 260         platform_add_devices(devices, ARRAY_SIZE(devices));
 261
 262         omap_board_config = fsample_config;
 263         omap_board_config_size = ARRAY_SIZE(fsample_config);
 264         omap_serial_init();
 265         omap_register_i2c_bus(1, 100, NULL, 0);
 266 }
 267
 268 static void __init fsample_init_smc91x(void)
 269 {
 270         fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
 271         mdelay(50);
 272         fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
 273                    H2P2_DBG_FPGA_LAN_RESET);
 274         mdelay(50);
 275 }
 276
 277 static void __init omap_fsample_init_irq(void)
 278 {
 279         omap1_init_common_hw();
 280         omap_init_irq();
 281         omap_gpio_init();
 282         fsample_init_smc91x();
 283 }
 284
 285 /* Only FPGA needs to be mapped here. All others are done with ioremap */
 286 static struct map_desc omap_fsample_io_desc[] __initdata = {
 287         {
 288                 .virtual        = H2P2_DBG_FPGA_BASE,
 289                 .pfn            = __phys_to_pfn(H2P2_DBG_FPGA_START),
 290                 .length         = H2P2_DBG_FPGA_SIZE,
 291                 .type           = MT_DEVICE
 292         },
 293         {
 294                 .virtual        = FSAMPLE_CPLD_BASE,
 295                 .pfn            = __phys_to_pfn(FSAMPLE_CPLD_START),
 296                 .length         = FSAMPLE_CPLD_SIZE,
 297                 .type           = MT_DEVICE
 298         }
 299 };
 300
 301 static void __init omap_fsample_map_io(void)
 302 {
 303         omap1_map_common_io();
 304         iotable_init(omap_fsample_io_desc,
 305                      ARRAY_SIZE(omap_fsample_io_desc));
 306
 307         /* Early, board-dependent init */
 308
 309         /*
 310          * Hold GSM Reset until needed
 311          */
 312         omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL);
 313
 314         /*
 315          * UARTs -> done automagically by 8250 driver
 316          */
 317
 318         /*
 319          * CSx timings, GPIO Mux ... setup
 320          */
 321
 322         /* Flash: CS0 timings setup */
 323         omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0);
 324         omap_writel(0x00000088, OMAP730_FLASH_ACFG_0);
 325
 326         /*
 327          * Ethernet support through the debug board
 328          * CS1 timings setup
 329          */
 330         omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1);
 331         omap_writel(0x00000000, OMAP730_FLASH_ACFG_1);
 332
 333         /*
 334          * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
 335          * It is used as the Ethernet controller interrupt
 336          */
 337         omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9);
 338 }
 339
 340 MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
 341 /* Maintainer: Brian Swetland <swetland@google.com> */
 342         .phys_io        = 0xfff00000,
 343         .io_pg_offst    = ((0xfef00000) >> 18) & 0xfffc,
 344         .boot_params    = 0x10000100,
 345         .map_io         = omap_fsample_map_io,
 346         .init_irq       = omap_fsample_init_irq,
 347         .init_machine   = omap_fsample_init,
 348         .timer          = &omap_timer,
 349 MACHINE_END