ARM: ixp4xx: Convert to SPARSE_IRQ
[sfrench/cifs-2.6.git] / arch / arm / mach-ixp4xx / nas100d-pci.c
1 /*
2  * arch/arm/mach-ixp4xx/nas100d-pci.c
3  *
4  * NAS 100d board-level PCI initialization
5  *
6  * based on ixdp425-pci.c:
7  *      Copyright (C) 2002 Intel Corporation.
8  *      Copyright (C) 2003-2004 MontaVista Software, Inc.
9  *
10  * Maintainer: http://www.nslu2-linux.org/
11  *
12  * This program is free software; you can redistribute it and/or modify
13  * it under the terms of the GNU General Public License version 2 as
14  * published by the Free Software Foundation.
15  *
16  */
17
18 #include <linux/pci.h>
19 #include <linux/init.h>
20 #include <linux/irq.h>
21 #include <asm/mach/pci.h>
22 #include <asm/mach-types.h>
23
24 #include "irqs.h"
25
26 #define MAX_DEV         3
27 #define IRQ_LINES       3
28
29 /* PCI controller GPIO to IRQ pin mappings */
30 #define INTA            11
31 #define INTB            10
32 #define INTC            9
33 #define INTD            8
34 #define INTE            7
35
36 void __init nas100d_pci_preinit(void)
37 {
38         irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW);
39         irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW);
40         irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW);
41         irq_set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW);
42         irq_set_irq_type(IXP4XX_GPIO_IRQ(INTE), IRQ_TYPE_LEVEL_LOW);
43         ixp4xx_pci_preinit();
44 }
45
46 static int __init nas100d_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
47 {
48         static int pci_irq_table[MAX_DEV][IRQ_LINES] = {
49                 { IXP4XX_GPIO_IRQ(INTA), -1, -1 },
50                 { IXP4XX_GPIO_IRQ(INTB), -1, -1 },
51                 { IXP4XX_GPIO_IRQ(INTC), IXP4XX_GPIO_IRQ(INTD),
52                   IXP4XX_GPIO_IRQ(INTE) },
53         };
54
55         if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES)
56                 return pci_irq_table[slot - 1][pin - 1];
57
58         return -1;
59 }
60
61 struct hw_pci __initdata nas100d_pci = {
62         .nr_controllers = 1,
63         .ops            = &ixp4xx_ops,
64         .preinit        = nas100d_pci_preinit,
65         .setup          = ixp4xx_setup,
66         .map_irq        = nas100d_map_irq,
67 };
68
69 int __init nas100d_pci_init(void)
70 {
71         if (machine_is_nas100d())
72                 pci_common_init(&nas100d_pci);
73
74         return 0;
75 }
76
77 subsys_initcall(nas100d_pci_init);