arch/arm/mach-imx/pm-imx6.c

   1 /*
   2  * Copyright 2011-2014 Freescale Semiconductor, Inc.
   3  * Copyright 2011 Linaro Ltd.
   4  *
   5  * The code contained herein is licensed under the GNU General Public
   6  * License. You may obtain a copy of the GNU General Public License
   7  * Version 2 or later at the following locations:
   8  *
   9  * http://www.opensource.org/licenses/gpl-license.html
  10  * http://www.gnu.org/copyleft/gpl.html
  11  */
  12
  13 #include <linux/delay.h>
  14 #include <linux/init.h>
  15 #include <linux/io.h>
  16 #include <linux/irq.h>
  17 #include <linux/genalloc.h>
  18 #include <linux/mfd/syscon.h>
  19 #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
  20 #include <linux/of.h>
  21 #include <linux/of_address.h>
  22 #include <linux/of_platform.h>
  23 #include <linux/regmap.h>
  24 #include <linux/suspend.h>
  25 #include <asm/cacheflush.h>
  26 #include <asm/fncpy.h>
  27 #include <asm/proc-fns.h>
  28 #include <asm/suspend.h>
  29 #include <asm/tlb.h>
  30
  31 #include "common.h"
  32 #include "hardware.h"
  33
  34 #define CCR                             0x0
  35 #define BM_CCR_WB_COUNT                 (0x7 << 16)
  36 #define BM_CCR_RBC_BYPASS_COUNT         (0x3f << 21)
  37 #define BM_CCR_RBC_EN                   (0x1 << 27)
  38
  39 #define CLPCR                           0x54
  40 #define BP_CLPCR_LPM                    0
  41 #define BM_CLPCR_LPM                    (0x3 << 0)
  42 #define BM_CLPCR_BYPASS_PMIC_READY      (0x1 << 2)
  43 #define BM_CLPCR_ARM_CLK_DIS_ON_LPM     (0x1 << 5)
  44 #define BM_CLPCR_SBYOS                  (0x1 << 6)
  45 #define BM_CLPCR_DIS_REF_OSC            (0x1 << 7)
  46 #define BM_CLPCR_VSTBY                  (0x1 << 8)
  47 #define BP_CLPCR_STBY_COUNT             9
  48 #define BM_CLPCR_STBY_COUNT             (0x3 << 9)
  49 #define BM_CLPCR_COSC_PWRDOWN           (0x1 << 11)
  50 #define BM_CLPCR_WB_PER_AT_LPM          (0x1 << 16)
  51 #define BM_CLPCR_WB_CORE_AT_LPM         (0x1 << 17)
  52 #define BM_CLPCR_BYP_MMDC_CH0_LPM_HS    (0x1 << 19)
  53 #define BM_CLPCR_BYP_MMDC_CH1_LPM_HS    (0x1 << 21)
  54 #define BM_CLPCR_MASK_CORE0_WFI         (0x1 << 22)
  55 #define BM_CLPCR_MASK_CORE1_WFI         (0x1 << 23)
  56 #define BM_CLPCR_MASK_CORE2_WFI         (0x1 << 24)
  57 #define BM_CLPCR_MASK_CORE3_WFI         (0x1 << 25)
  58 #define BM_CLPCR_MASK_SCU_IDLE          (0x1 << 26)
  59 #define BM_CLPCR_MASK_L2CC_IDLE         (0x1 << 27)
  60
  61 #define CGPR                            0x64
  62 #define BM_CGPR_INT_MEM_CLK_LPM         (0x1 << 17)
  63
  64 #define MX6Q_SUSPEND_OCRAM_SIZE         0x1000
  65 #define MX6_MAX_MMDC_IO_NUM             33
  66
  67 static void __iomem *ccm_base;
  68 static void __iomem *suspend_ocram_base;
  69 static void (*imx6_suspend_in_ocram_fn)(void __iomem *ocram_vbase);
  70
  71 /*
  72  * suspend ocram space layout:
  73  * ======================== high address ======================
  74  *                              .
  75  *                              .
  76  *                              .
  77  *                              ^
  78  *                              ^
  79  *                              ^
  80  *                      imx6_suspend code
  81  *              PM_INFO structure(imx6_cpu_pm_info)
  82  * ======================== low address =======================
  83  */
  84
  85 struct imx6_pm_base {
  86         phys_addr_t pbase;
  87         void __iomem *vbase;
  88 };
  89
  90 struct imx6_pm_socdata {
  91         u32 ddr_type;
  92         const char *mmdc_compat;
  93         const char *src_compat;
  94         const char *iomuxc_compat;
  95         const char *gpc_compat;
  96         const char *pl310_compat;
  97         const u32 mmdc_io_num;
  98         const u32 *mmdc_io_offset;
  99 };
 100
 101 static const u32 imx6q_mmdc_io_offset[] __initconst = {
 102         0x5ac, 0x5b4, 0x528, 0x520, /* DQM0 ~ DQM3 */
 103         0x514, 0x510, 0x5bc, 0x5c4, /* DQM4 ~ DQM7 */
 104         0x56c, 0x578, 0x588, 0x594, /* CAS, RAS, SDCLK_0, SDCLK_1 */
 105         0x5a8, 0x5b0, 0x524, 0x51c, /* SDQS0 ~ SDQS3 */
 106         0x518, 0x50c, 0x5b8, 0x5c0, /* SDQS4 ~ SDQS7 */
 107         0x784, 0x788, 0x794, 0x79c, /* GPR_B0DS ~ GPR_B3DS */
 108         0x7a0, 0x7a4, 0x7a8, 0x748, /* GPR_B4DS ~ GPR_B7DS */
 109         0x59c, 0x5a0, 0x750, 0x774, /* SODT0, SODT1, MODE_CTL, MODE */
 110         0x74c,                      /* GPR_ADDS */
 111 };
 112
 113 static const u32 imx6dl_mmdc_io_offset[] __initconst = {
 114         0x470, 0x474, 0x478, 0x47c, /* DQM0 ~ DQM3 */
 115         0x480, 0x484, 0x488, 0x48c, /* DQM4 ~ DQM7 */
 116         0x464, 0x490, 0x4ac, 0x4b0, /* CAS, RAS, SDCLK_0, SDCLK_1 */
 117         0x4bc, 0x4c0, 0x4c4, 0x4c8, /* DRAM_SDQS0 ~ DRAM_SDQS3 */
 118         0x4cc, 0x4d0, 0x4d4, 0x4d8, /* DRAM_SDQS4 ~ DRAM_SDQS7 */
 119         0x764, 0x770, 0x778, 0x77c, /* GPR_B0DS ~ GPR_B3DS */
 120         0x780, 0x784, 0x78c, 0x748, /* GPR_B4DS ~ GPR_B7DS */
 121         0x4b4, 0x4b8, 0x750, 0x760, /* SODT0, SODT1, MODE_CTL, MODE */
 122         0x74c,                      /* GPR_ADDS */
 123 };
 124
 125 static const u32 imx6sl_mmdc_io_offset[] __initconst = {
 126         0x30c, 0x310, 0x314, 0x318, /* DQM0 ~ DQM3 */
 127         0x5c4, 0x5cc, 0x5d4, 0x5d8, /* GPR_B0DS ~ GPR_B3DS */
 128         0x300, 0x31c, 0x338, 0x5ac, /* CAS, RAS, SDCLK_0, GPR_ADDS */
 129         0x33c, 0x340, 0x5b0, 0x5c0, /* SODT0, SODT1, MODE_CTL, MODE */
 130         0x330, 0x334, 0x320,        /* SDCKE0, SDCKE1, RESET */
 131 };
 132
 133 static const u32 imx6sx_mmdc_io_offset[] __initconst = {
 134         0x2ec, 0x2f0, 0x2f4, 0x2f8, /* DQM0 ~ DQM3 */
 135         0x60c, 0x610, 0x61c, 0x620, /* GPR_B0DS ~ GPR_B3DS */
 136         0x300, 0x2fc, 0x32c, 0x5f4, /* CAS, RAS, SDCLK_0, GPR_ADDS */
 137         0x310, 0x314, 0x5f8, 0x608, /* SODT0, SODT1, MODE_CTL, MODE */
 138         0x330, 0x334, 0x338, 0x33c, /* SDQS0 ~ SDQS3 */
 139 };
 140
 141 static const u32 imx6ul_mmdc_io_offset[] __initconst = {
 142         0x244, 0x248, 0x24c, 0x250, /* DQM0, DQM1, RAS, CAS */
 143         0x27c, 0x498, 0x4a4, 0x490, /* SDCLK0, GPR_B0DS-B1DS, GPR_ADDS */
 144         0x280, 0x284, 0x260, 0x264, /* SDQS0~1, SODT0, SODT1 */
 145         0x494, 0x4b0,               /* MODE_CTL, MODE, */
 146 };
 147
 148 static const struct imx6_pm_socdata imx6q_pm_data __initconst = {
 149         .mmdc_compat = "fsl,imx6q-mmdc",
 150         .src_compat = "fsl,imx6q-src",
 151         .iomuxc_compat = "fsl,imx6q-iomuxc",
 152         .gpc_compat = "fsl,imx6q-gpc",
 153         .pl310_compat = "arm,pl310-cache",
 154         .mmdc_io_num = ARRAY_SIZE(imx6q_mmdc_io_offset),
 155         .mmdc_io_offset = imx6q_mmdc_io_offset,
 156 };
 157
 158 static const struct imx6_pm_socdata imx6dl_pm_data __initconst = {
 159         .mmdc_compat = "fsl,imx6q-mmdc",
 160         .src_compat = "fsl,imx6q-src",
 161         .iomuxc_compat = "fsl,imx6dl-iomuxc",
 162         .gpc_compat = "fsl,imx6q-gpc",
 163         .pl310_compat = "arm,pl310-cache",
 164         .mmdc_io_num = ARRAY_SIZE(imx6dl_mmdc_io_offset),
 165         .mmdc_io_offset = imx6dl_mmdc_io_offset,
 166 };
 167
 168 static const struct imx6_pm_socdata imx6sl_pm_data __initconst = {
 169         .mmdc_compat = "fsl,imx6sl-mmdc",
 170         .src_compat = "fsl,imx6sl-src",
 171         .iomuxc_compat = "fsl,imx6sl-iomuxc",
 172         .gpc_compat = "fsl,imx6sl-gpc",
 173         .pl310_compat = "arm,pl310-cache",
 174         .mmdc_io_num = ARRAY_SIZE(imx6sl_mmdc_io_offset),
 175         .mmdc_io_offset = imx6sl_mmdc_io_offset,
 176 };
 177
 178 static const struct imx6_pm_socdata imx6sx_pm_data __initconst = {
 179         .mmdc_compat = "fsl,imx6sx-mmdc",
 180         .src_compat = "fsl,imx6sx-src",
 181         .iomuxc_compat = "fsl,imx6sx-iomuxc",
 182         .gpc_compat = "fsl,imx6sx-gpc",
 183         .pl310_compat = "arm,pl310-cache",
 184         .mmdc_io_num = ARRAY_SIZE(imx6sx_mmdc_io_offset),
 185         .mmdc_io_offset = imx6sx_mmdc_io_offset,
 186 };
 187
 188 static const struct imx6_pm_socdata imx6ul_pm_data __initconst = {
 189         .mmdc_compat = "fsl,imx6ul-mmdc",
 190         .src_compat = "fsl,imx6ul-src",
 191         .iomuxc_compat = "fsl,imx6ul-iomuxc",
 192         .gpc_compat = "fsl,imx6ul-gpc",
 193         .pl310_compat = NULL,
 194         .mmdc_io_num = ARRAY_SIZE(imx6ul_mmdc_io_offset),
 195         .mmdc_io_offset = imx6ul_mmdc_io_offset,
 196 };
 197
 198 /*
 199  * This structure is for passing necessary data for low level ocram
 200  * suspend code(arch/arm/mach-imx/suspend-imx6.S), if this struct
 201  * definition is changed, the offset definition in
 202  * arch/arm/mach-imx/suspend-imx6.S must be also changed accordingly,
 203  * otherwise, the suspend to ocram function will be broken!
 204  */
 205 struct imx6_cpu_pm_info {
 206         phys_addr_t pbase; /* The physical address of pm_info. */
 207         phys_addr_t resume_addr; /* The physical resume address for asm code */
 208         u32 ddr_type;
 209         u32 pm_info_size; /* Size of pm_info. */
 210         struct imx6_pm_base mmdc_base;
 211         struct imx6_pm_base src_base;
 212         struct imx6_pm_base iomuxc_base;
 213         struct imx6_pm_base ccm_base;
 214         struct imx6_pm_base gpc_base;
 215         struct imx6_pm_base l2_base;
 216         u32 mmdc_io_num; /* Number of MMDC IOs which need saved/restored. */
 217         u32 mmdc_io_val[MX6_MAX_MMDC_IO_NUM][2]; /* To save offset and value */
 218 } __aligned(8);
 219
 220 void imx6_set_int_mem_clk_lpm(bool enable)
 221 {
 222         u32 val = readl_relaxed(ccm_base + CGPR);
 223
 224         val &= ~BM_CGPR_INT_MEM_CLK_LPM;
 225         if (enable)
 226                 val |= BM_CGPR_INT_MEM_CLK_LPM;
 227         writel_relaxed(val, ccm_base + CGPR);
 228 }
 229
 230 void imx6_enable_rbc(bool enable)
 231 {
 232         u32 val;
 233
 234         /*
 235          * need to mask all interrupts in GPC before
 236          * operating RBC configurations
 237          */
 238         imx_gpc_mask_all();
 239
 240         /* configure RBC enable bit */
 241         val = readl_relaxed(ccm_base + CCR);
 242         val &= ~BM_CCR_RBC_EN;
 243         val |= enable ? BM_CCR_RBC_EN : 0;
 244         writel_relaxed(val, ccm_base + CCR);
 245
 246         /* configure RBC count */
 247         val = readl_relaxed(ccm_base + CCR);
 248         val &= ~BM_CCR_RBC_BYPASS_COUNT;
 249         val |= enable ? BM_CCR_RBC_BYPASS_COUNT : 0;
 250         writel(val, ccm_base + CCR);
 251
 252         /*
 253          * need to delay at least 2 cycles of CKIL(32K)
 254          * due to hardware design requirement, which is
 255          * ~61us, here we use 65us for safe
 256          */
 257         udelay(65);
 258
 259         /* restore GPC interrupt mask settings */
 260         imx_gpc_restore_all();
 261 }
 262
 263 static void imx6q_enable_wb(bool enable)
 264 {
 265         u32 val;
 266
 267         /* configure well bias enable bit */
 268         val = readl_relaxed(ccm_base + CLPCR);
 269         val &= ~BM_CLPCR_WB_PER_AT_LPM;
 270         val |= enable ? BM_CLPCR_WB_PER_AT_LPM : 0;
 271         writel_relaxed(val, ccm_base + CLPCR);
 272
 273         /* configure well bias count */
 274         val = readl_relaxed(ccm_base + CCR);
 275         val &= ~BM_CCR_WB_COUNT;
 276         val |= enable ? BM_CCR_WB_COUNT : 0;
 277         writel_relaxed(val, ccm_base + CCR);
 278 }
 279
 280 int imx6_set_lpm(enum mxc_cpu_pwr_mode mode)
 281 {
 282         u32 val = readl_relaxed(ccm_base + CLPCR);
 283
 284         val &= ~BM_CLPCR_LPM;
 285         switch (mode) {
 286         case WAIT_CLOCKED:
 287                 break;
 288         case WAIT_UNCLOCKED:
 289                 val |= 0x1 << BP_CLPCR_LPM;
 290                 val |= BM_CLPCR_ARM_CLK_DIS_ON_LPM;
 291                 break;
 292         case STOP_POWER_ON:
 293                 val |= 0x2 << BP_CLPCR_LPM;
 294                 val &= ~BM_CLPCR_VSTBY;
 295                 val &= ~BM_CLPCR_SBYOS;
 296                 if (cpu_is_imx6sl())
 297                         val |= BM_CLPCR_BYPASS_PMIC_READY;
 298                 if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul() ||
 299                     cpu_is_imx6ull())
 300                         val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
 301                 else
 302                         val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
 303                 break;
 304         case WAIT_UNCLOCKED_POWER_OFF:
 305                 val |= 0x1 << BP_CLPCR_LPM;
 306                 val &= ~BM_CLPCR_VSTBY;
 307                 val &= ~BM_CLPCR_SBYOS;
 308                 break;
 309         case STOP_POWER_OFF:
 310                 val |= 0x2 << BP_CLPCR_LPM;
 311                 val |= 0x3 << BP_CLPCR_STBY_COUNT;
 312                 val |= BM_CLPCR_VSTBY;
 313                 val |= BM_CLPCR_SBYOS;
 314                 if (cpu_is_imx6sl() || cpu_is_imx6sx())
 315                         val |= BM_CLPCR_BYPASS_PMIC_READY;
 316                 if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul() ||
 317                     cpu_is_imx6ull())
 318                         val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
 319                 else
 320                         val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
 321                 break;
 322         default:
 323                 return -EINVAL;
 324         }
 325
 326         /*
 327          * ERR007265: CCM: When improper low-power sequence is used,
 328          * the SoC enters low power mode before the ARM core executes WFI.
 329          *
 330          * Software workaround:
 331          * 1) Software should trigger IRQ #32 (IOMUX) to be always pending
 332          *    by setting IOMUX_GPR1_GINT.
 333          * 2) Software should then unmask IRQ #32 in GPC before setting CCM
 334          *    Low-Power mode.
 335          * 3) Software should mask IRQ #32 right after CCM Low-Power mode
 336          *    is set (set bits 0-1 of CCM_CLPCR).
 337          *
 338          * Note that IRQ #32 is GIC SPI #0.
 339          */
 340         imx_gpc_hwirq_unmask(0);
 341         writel_relaxed(val, ccm_base + CLPCR);
 342         imx_gpc_hwirq_mask(0);
 343
 344         return 0;
 345 }
 346
 347 static int imx6q_suspend_finish(unsigned long val)
 348 {
 349         if (!imx6_suspend_in_ocram_fn) {
 350                 cpu_do_idle();
 351         } else {
 352                 /*
 353                  * call low level suspend function in ocram,
 354                  * as we need to float DDR IO.
 355                  */
 356                 local_flush_tlb_all();
 357                 /* check if need to flush internal L2 cache */
 358                 if (!((struct imx6_cpu_pm_info *)
 359                         suspend_ocram_base)->l2_base.vbase)
 360                         flush_cache_all();
 361                 imx6_suspend_in_ocram_fn(suspend_ocram_base);
 362         }
 363
 364         return 0;
 365 }
 366
 367 static int imx6q_pm_enter(suspend_state_t state)
 368 {
 369         switch (state) {
 370         case PM_SUSPEND_STANDBY:
 371                 imx6_set_lpm(STOP_POWER_ON);
 372                 imx6_set_int_mem_clk_lpm(true);
 373                 imx_gpc_pre_suspend(false);
 374                 if (cpu_is_imx6sl())
 375                         imx6sl_set_wait_clk(true);
 376                 /* Zzz ... */
 377                 cpu_do_idle();
 378                 if (cpu_is_imx6sl())
 379                         imx6sl_set_wait_clk(false);
 380                 imx_gpc_post_resume();
 381                 imx6_set_lpm(WAIT_CLOCKED);
 382                 break;
 383         case PM_SUSPEND_MEM:
 384                 imx6_set_lpm(STOP_POWER_OFF);
 385                 imx6_set_int_mem_clk_lpm(false);
 386                 imx6q_enable_wb(true);
 387                 /*
 388                  * For suspend into ocram, asm code already take care of
 389                  * RBC setting, so we do NOT need to do that here.
 390                  */
 391                 if (!imx6_suspend_in_ocram_fn)
 392                         imx6_enable_rbc(true);
 393                 imx_gpc_pre_suspend(true);
 394                 imx_anatop_pre_suspend();
 395                 /* Zzz ... */
 396                 cpu_suspend(0, imx6q_suspend_finish);
 397                 if (cpu_is_imx6q() || cpu_is_imx6dl())
 398                         imx_smp_prepare();
 399                 imx_anatop_post_resume();
 400                 imx_gpc_post_resume();
 401                 imx6_enable_rbc(false);
 402                 imx6q_enable_wb(false);
 403                 imx6_set_int_mem_clk_lpm(true);
 404                 imx6_set_lpm(WAIT_CLOCKED);
 405                 break;
 406         default:
 407                 return -EINVAL;
 408         }
 409
 410         return 0;
 411 }
 412
 413 static int imx6q_pm_valid(suspend_state_t state)
 414 {
 415         return (state == PM_SUSPEND_STANDBY || state == PM_SUSPEND_MEM);
 416 }
 417
 418 static const struct platform_suspend_ops imx6q_pm_ops = {
 419         .enter = imx6q_pm_enter,
 420         .valid = imx6q_pm_valid,
 421 };
 422
 423 static int __init imx6_pm_get_base(struct imx6_pm_base *base,
 424                                 const char *compat)
 425 {
 426         struct device_node *node;
 427         struct resource res;
 428         int ret = 0;
 429
 430         node = of_find_compatible_node(NULL, NULL, compat);
 431         if (!node) {
 432                 ret = -ENODEV;
 433                 goto out;
 434         }
 435
 436         ret = of_address_to_resource(node, 0, &res);
 437         if (ret)
 438                 goto put_node;
 439
 440         base->pbase = res.start;
 441         base->vbase = ioremap(res.start, resource_size(&res));
 442         if (!base->vbase)
 443                 ret = -ENOMEM;
 444
 445 put_node:
 446         of_node_put(node);
 447 out:
 448         return ret;
 449 }
 450
 451 static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata)
 452 {
 453         phys_addr_t ocram_pbase;
 454         struct device_node *node;
 455         struct platform_device *pdev;
 456         struct imx6_cpu_pm_info *pm_info;
 457         struct gen_pool *ocram_pool;
 458         unsigned long ocram_base;
 459         int i, ret = 0;
 460         const u32 *mmdc_offset_array;
 461
 462         suspend_set_ops(&imx6q_pm_ops);
 463
 464         if (!socdata) {
 465                 pr_warn("%s: invalid argument!\n", __func__);
 466                 return -EINVAL;
 467         }
 468
 469         node = of_find_compatible_node(NULL, NULL, "mmio-sram");
 470         if (!node) {
 471                 pr_warn("%s: failed to find ocram node!\n", __func__);
 472                 return -ENODEV;
 473         }
 474
 475         pdev = of_find_device_by_node(node);
 476         if (!pdev) {
 477                 pr_warn("%s: failed to find ocram device!\n", __func__);
 478                 ret = -ENODEV;
 479                 goto put_node;
 480         }
 481
 482         ocram_pool = gen_pool_get(&pdev->dev, NULL);
 483         if (!ocram_pool) {
 484                 pr_warn("%s: ocram pool unavailable!\n", __func__);
 485                 ret = -ENODEV;
 486                 goto put_node;
 487         }
 488
 489         ocram_base = gen_pool_alloc(ocram_pool, MX6Q_SUSPEND_OCRAM_SIZE);
 490         if (!ocram_base) {
 491                 pr_warn("%s: unable to alloc ocram!\n", __func__);
 492                 ret = -ENOMEM;
 493                 goto put_node;
 494         }
 495
 496         ocram_pbase = gen_pool_virt_to_phys(ocram_pool, ocram_base);
 497
 498         suspend_ocram_base = __arm_ioremap_exec(ocram_pbase,
 499                 MX6Q_SUSPEND_OCRAM_SIZE, false);
 500
 501         memset(suspend_ocram_base, 0, sizeof(*pm_info));
 502         pm_info = suspend_ocram_base;
 503         pm_info->pbase = ocram_pbase;
 504         pm_info->resume_addr = __pa_symbol(v7_cpu_resume);
 505         pm_info->pm_info_size = sizeof(*pm_info);
 506
 507         /*
 508          * ccm physical address is not used by asm code currently,
 509          * so get ccm virtual address directly.
 510          */
 511         pm_info->ccm_base.vbase = ccm_base;
 512
 513         ret = imx6_pm_get_base(&pm_info->mmdc_base, socdata->mmdc_compat);
 514         if (ret) {
 515                 pr_warn("%s: failed to get mmdc base %d!\n", __func__, ret);
 516                 goto put_node;
 517         }
 518
 519         ret = imx6_pm_get_base(&pm_info->src_base, socdata->src_compat);
 520         if (ret) {
 521                 pr_warn("%s: failed to get src base %d!\n", __func__, ret);
 522                 goto src_map_failed;
 523         }
 524
 525         ret = imx6_pm_get_base(&pm_info->iomuxc_base, socdata->iomuxc_compat);
 526         if (ret) {
 527                 pr_warn("%s: failed to get iomuxc base %d!\n", __func__, ret);
 528                 goto iomuxc_map_failed;
 529         }
 530
 531         ret = imx6_pm_get_base(&pm_info->gpc_base, socdata->gpc_compat);
 532         if (ret) {
 533                 pr_warn("%s: failed to get gpc base %d!\n", __func__, ret);
 534                 goto gpc_map_failed;
 535         }
 536
 537         if (socdata->pl310_compat) {
 538                 ret = imx6_pm_get_base(&pm_info->l2_base, socdata->pl310_compat);
 539                 if (ret) {
 540                         pr_warn("%s: failed to get pl310-cache base %d!\n",
 541                                 __func__, ret);
 542                         goto pl310_cache_map_failed;
 543                 }
 544         }
 545
 546         pm_info->ddr_type = imx_mmdc_get_ddr_type();
 547         pm_info->mmdc_io_num = socdata->mmdc_io_num;
 548         mmdc_offset_array = socdata->mmdc_io_offset;
 549
 550         for (i = 0; i < pm_info->mmdc_io_num; i++) {
 551                 pm_info->mmdc_io_val[i][0] =
 552                         mmdc_offset_array[i];
 553                 pm_info->mmdc_io_val[i][1] =
 554                         readl_relaxed(pm_info->iomuxc_base.vbase +
 555                         mmdc_offset_array[i]);
 556         }
 557
 558         imx6_suspend_in_ocram_fn = fncpy(
 559                 suspend_ocram_base + sizeof(*pm_info),
 560                 &imx6_suspend,
 561                 MX6Q_SUSPEND_OCRAM_SIZE - sizeof(*pm_info));
 562
 563         goto put_node;
 564
 565 pl310_cache_map_failed:
 566         iounmap(pm_info->gpc_base.vbase);
 567 gpc_map_failed:
 568         iounmap(pm_info->iomuxc_base.vbase);
 569 iomuxc_map_failed:
 570         iounmap(pm_info->src_base.vbase);
 571 src_map_failed:
 572         iounmap(pm_info->mmdc_base.vbase);
 573 put_node:
 574         of_node_put(node);
 575
 576         return ret;
 577 }
 578
 579 static void __init imx6_pm_common_init(const struct imx6_pm_socdata
 580                                         *socdata)
 581 {
 582         struct regmap *gpr;
 583         int ret;
 584
 585         WARN_ON(!ccm_base);
 586
 587         if (IS_ENABLED(CONFIG_SUSPEND)) {
 588                 ret = imx6q_suspend_init(socdata);
 589                 if (ret)
 590                         pr_warn("%s: No DDR LPM support with suspend %d!\n",
 591                                 __func__, ret);
 592         }
 593
 594         /*
 595          * This is for SW workaround step #1 of ERR007265, see comments
 596          * in imx6_set_lpm for details of this errata.
 597          * Force IOMUXC irq pending, so that the interrupt to GPC can be
 598          * used to deassert dsm_request signal when the signal gets
 599          * asserted unexpectedly.
 600          */
 601         gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
 602         if (!IS_ERR(gpr))
 603                 regmap_update_bits(gpr, IOMUXC_GPR1, IMX6Q_GPR1_GINT,
 604                                    IMX6Q_GPR1_GINT);
 605 }
 606
 607 void __init imx6_pm_ccm_init(const char *ccm_compat)
 608 {
 609         struct device_node *np;
 610         u32 val;
 611
 612         np = of_find_compatible_node(NULL, NULL, ccm_compat);
 613         ccm_base = of_iomap(np, 0);
 614         BUG_ON(!ccm_base);
 615
 616         /*
 617          * Initialize CCM_CLPCR_LPM into RUN mode to avoid ARM core
 618          * clock being shut down unexpectedly by WAIT mode.
 619          */
 620         val = readl_relaxed(ccm_base + CLPCR);
 621         val &= ~BM_CLPCR_LPM;
 622         writel_relaxed(val, ccm_base + CLPCR);
 623 }
 624
 625 void __init imx6q_pm_init(void)
 626 {
 627         imx6_pm_common_init(&imx6q_pm_data);
 628 }
 629
 630 void __init imx6dl_pm_init(void)
 631 {
 632         imx6_pm_common_init(&imx6dl_pm_data);
 633 }
 634
 635 void __init imx6sl_pm_init(void)
 636 {
 637         imx6_pm_common_init(&imx6sl_pm_data);
 638 }
 639
 640 void __init imx6sx_pm_init(void)
 641 {
 642         imx6_pm_common_init(&imx6sx_pm_data);
 643 }
 644
 645 void __init imx6ul_pm_init(void)
 646 {
 647         imx6_pm_common_init(&imx6ul_pm_data);
 648 }