leds: Add support for Cobalt Server front LED
[sfrench/cifs-2.6.git] / arch / arm / mach-at91rm9200 / at91sam926x_time.c
1 /*
2  * linux/arch/arm/mach-at91rm9200/at91sam926x_time.c
3  *
4  * Copyright (C) 2005-2006 M. Amine SAYA, ATMEL Rousset, France
5  * Revision      2005 M. Nicolas Diremdjian, ATMEL Rousset, France
6  *
7  * This program is free software; you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License version 2 as
9  * published by the Free Software Foundation.
10  */
11
12 #include <linux/init.h>
13 #include <linux/interrupt.h>
14 #include <linux/irq.h>
15 #include <linux/kernel.h>
16 #include <linux/sched.h>
17 #include <linux/time.h>
18
19 #include <asm/hardware.h>
20 #include <asm/io.h>
21 #include <asm/mach/time.h>
22
23 #include <asm/arch/at91_pit.h>
24
25
26 #define PIT_CPIV(x)     ((x) & AT91_PIT_CPIV)
27 #define PIT_PICNT(x)    (((x) & AT91_PIT_PICNT) >> 20)
28
29 /*
30  * Returns number of microseconds since last timer interrupt.  Note that interrupts
31  * will have been disabled by do_gettimeofday()
32  *  'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy.
33  *  'tick' is usecs per jiffy (linux/timex.h).
34  */
35 static unsigned long at91sam926x_gettimeoffset(void)
36 {
37         unsigned long elapsed;
38         unsigned long t = at91_sys_read(AT91_PIT_PIIR);
39
40         elapsed = (PIT_PICNT(t) * LATCH) + PIT_CPIV(t);         /* hardware clock cycles */
41
42         return (unsigned long)(elapsed * 1000000) / LATCH;
43 }
44
45 /*
46  * IRQ handler for the timer.
47  */
48 static irqreturn_t at91sam926x_timer_interrupt(int irq, void *dev_id)
49 {
50         volatile long nr_ticks;
51
52         if (at91_sys_read(AT91_PIT_SR) & AT91_PIT_PITS) {       /* This is a shared interrupt */
53                 write_seqlock(&xtime_lock);
54
55                 /* Get number to ticks performed before interrupt and clear PIT interrupt */
56                 nr_ticks = PIT_PICNT(at91_sys_read(AT91_PIT_PIVR));
57                 do {
58                         timer_tick();
59                         nr_ticks--;
60                 } while (nr_ticks);
61
62                 write_sequnlock(&xtime_lock);
63                 return IRQ_HANDLED;
64         } else
65                 return IRQ_NONE;                /* not handled */
66 }
67
68 static struct irqaction at91sam926x_timer_irq = {
69         .name           = "at91_tick",
70         .flags          = IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER,
71         .handler        = at91sam926x_timer_interrupt
72 };
73
74 void at91sam926x_timer_reset(void)
75 {
76         /* Disable timer */
77         at91_sys_write(AT91_PIT_MR, 0);
78
79         /* Clear any pending interrupts */
80         (void) at91_sys_read(AT91_PIT_PIVR);
81
82         /* Set Period Interval timer and enable its interrupt */
83         at91_sys_write(AT91_PIT_MR, (LATCH & AT91_PIT_PIV) | AT91_PIT_PITIEN | AT91_PIT_PITEN);
84 }
85
86 /*
87  * Set up timer interrupt.
88  */
89 void __init at91sam926x_timer_init(void)
90 {
91         /* Initialize and enable the timer */
92         at91sam926x_timer_reset();
93
94         /* Make IRQs happen for the system timer. */
95         setup_irq(AT91_ID_SYS, &at91sam926x_timer_irq);
96 }
97
98 #ifdef CONFIG_PM
99 static void at91sam926x_timer_suspend(void)
100 {
101         /* Disable timer */
102         at91_sys_write(AT91_PIT_MR, 0);
103 }
104 #else
105 #define at91sam926x_timer_suspend       NULL
106 #endif
107
108 struct sys_timer at91sam926x_timer = {
109         .init           = at91sam926x_timer_init,
110         .offset         = at91sam926x_gettimeoffset,
111         .suspend        = at91sam926x_timer_suspend,
112         .resume         = at91sam926x_timer_reset,
113 };
114