arch/arm/boot/dts/vexpress-v2m.dtsi

   1 /*
   2  * ARM Ltd. Versatile Express
   3  *
   4  * Motherboard Express uATX
   5  * V2M-P1
   6  *
   7  * HBI-0190D
   8  *
   9  * Original memory map ("Legacy memory map" in the board's
  10  * Technical Reference Manual)
  11  *
  12  * WARNING! The hardware described in this file is independent from the
  13  * RS1 variant (vexpress-v2m-rs1.dtsi), but there is a strong
  14  * correspondence between the two configurations.
  15  *
  16  * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
  17  * CHANGES TO vexpress-v2m-rs1.dtsi!
  18  */
  19
  20         motherboard {
  21                 model = "V2M-P1";
  22                 arm,hbi = <0x190>;
  23                 arm,vexpress,site = <0>;
  24                 compatible = "arm,vexpress,v2m-p1", "simple-bus";
  25                 #address-cells = <2>; /* SMB chipselect number and offset */
  26                 #size-cells = <1>;
  27                 #interrupt-cells = <1>;
  28                 ranges;
  29
  30                 flash@0,00000000 {
  31                         compatible = "arm,vexpress-flash", "cfi-flash";
  32                         reg = <0 0x00000000 0x04000000>,
  33                               <1 0x00000000 0x04000000>;
  34                         bank-width = <4>;
  35                 };
  36
  37                 psram@2,00000000 {
  38                         compatible = "arm,vexpress-psram", "mtd-ram";
  39                         reg = <2 0x00000000 0x02000000>;
  40                         bank-width = <4>;
  41                 };
  42
  43                 vram@3,00000000 {
  44                         compatible = "arm,vexpress-vram";
  45                         reg = <3 0x00000000 0x00800000>;
  46                 };
  47
  48                 ethernet@3,02000000 {
  49                         compatible = "smsc,lan9118", "smsc,lan9115";
  50                         reg = <3 0x02000000 0x10000>;
  51                         interrupts = <15>;
  52                         phy-mode = "mii";
  53                         reg-io-width = <4>;
  54                         smsc,irq-active-high;
  55                         smsc,irq-push-pull;
  56                         vdd33a-supply = <&v2m_fixed_3v3>;
  57                         vddvario-supply = <&v2m_fixed_3v3>;
  58                 };
  59
  60                 usb@3,03000000 {
  61                         compatible = "nxp,usb-isp1761";
  62                         reg = <3 0x03000000 0x20000>;
  63                         interrupts = <16>;
  64                         port1-otg;
  65                 };
  66
  67                 iofpga@7,00000000 {
  68                         compatible = "arm,amba-bus", "simple-bus";
  69                         #address-cells = <1>;
  70                         #size-cells = <1>;
  71                         ranges = <0 7 0 0x20000>;
  72
  73                         v2m_sysreg: sysreg@00000 {
  74                                 compatible = "arm,vexpress-sysreg";
  75                                 reg = <0x00000 0x1000>;
  76
  77                                 v2m_led_gpios: sys_led@08 {
  78                                         compatible = "arm,vexpress-sysreg,sys_led";
  79                                         gpio-controller;
  80                                         #gpio-cells = <2>;
  81                                 };
  82
  83                                 v2m_mmc_gpios: sys_mci@48 {
  84                                         compatible = "arm,vexpress-sysreg,sys_mci";
  85                                         gpio-controller;
  86                                         #gpio-cells = <2>;
  87                                 };
  88
  89                                 v2m_flash_gpios: sys_flash@4c {
  90                                         compatible = "arm,vexpress-sysreg,sys_flash";
  91                                         gpio-controller;
  92                                         #gpio-cells = <2>;
  93                                 };
  94                         };
  95
  96                         v2m_sysctl: sysctl@01000 {
  97                                 compatible = "arm,sp810", "arm,primecell";
  98                                 reg = <0x01000 0x1000>;
  99                                 clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
 100                                 clock-names = "refclk", "timclk", "apb_pclk";
 101                                 #clock-cells = <1>;
 102                                 clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
 103                         };
 104
 105                         /* PCI-E I2C bus */
 106                         v2m_i2c_pcie: i2c@02000 {
 107                                 compatible = "arm,versatile-i2c";
 108                                 reg = <0x02000 0x1000>;
 109
 110                                 #address-cells = <1>;
 111                                 #size-cells = <0>;
 112
 113                                 pcie-switch@60 {
 114                                         compatible = "idt,89hpes32h8";
 115                                         reg = <0x60>;
 116                                 };
 117                         };
 118
 119                         aaci@04000 {
 120                                 compatible = "arm,pl041", "arm,primecell";
 121                                 reg = <0x04000 0x1000>;
 122                                 interrupts = <11>;
 123                                 clocks = <&smbclk>;
 124                                 clock-names = "apb_pclk";
 125                         };
 126
 127                         mmci@05000 {
 128                                 compatible = "arm,pl180", "arm,primecell";
 129                                 reg = <0x05000 0x1000>;
 130                                 interrupts = <9 10>;
 131                                 cd-gpios = <&v2m_mmc_gpios 0 0>;
 132                                 wp-gpios = <&v2m_mmc_gpios 1 0>;
 133                                 max-frequency = <12000000>;
 134                                 vmmc-supply = <&v2m_fixed_3v3>;
 135                                 clocks = <&v2m_clk24mhz>, <&smbclk>;
 136                                 clock-names = "mclk", "apb_pclk";
 137                         };
 138
 139                         kmi@06000 {
 140                                 compatible = "arm,pl050", "arm,primecell";
 141                                 reg = <0x06000 0x1000>;
 142                                 interrupts = <12>;
 143                                 clocks = <&v2m_clk24mhz>, <&smbclk>;
 144                                 clock-names = "KMIREFCLK", "apb_pclk";
 145                         };
 146
 147                         kmi@07000 {
 148                                 compatible = "arm,pl050", "arm,primecell";
 149                                 reg = <0x07000 0x1000>;
 150                                 interrupts = <13>;
 151                                 clocks = <&v2m_clk24mhz>, <&smbclk>;
 152                                 clock-names = "KMIREFCLK", "apb_pclk";
 153                         };
 154
 155                         v2m_serial0: uart@09000 {
 156                                 compatible = "arm,pl011", "arm,primecell";
 157                                 reg = <0x09000 0x1000>;
 158                                 interrupts = <5>;
 159                                 clocks = <&v2m_oscclk2>, <&smbclk>;
 160                                 clock-names = "uartclk", "apb_pclk";
 161                         };
 162
 163                         v2m_serial1: uart@0a000 {
 164                                 compatible = "arm,pl011", "arm,primecell";
 165                                 reg = <0x0a000 0x1000>;
 166                                 interrupts = <6>;
 167                                 clocks = <&v2m_oscclk2>, <&smbclk>;
 168                                 clock-names = "uartclk", "apb_pclk";
 169                         };
 170
 171                         v2m_serial2: uart@0b000 {
 172                                 compatible = "arm,pl011", "arm,primecell";
 173                                 reg = <0x0b000 0x1000>;
 174                                 interrupts = <7>;
 175                                 clocks = <&v2m_oscclk2>, <&smbclk>;
 176                                 clock-names = "uartclk", "apb_pclk";
 177                         };
 178
 179                         v2m_serial3: uart@0c000 {
 180                                 compatible = "arm,pl011", "arm,primecell";
 181                                 reg = <0x0c000 0x1000>;
 182                                 interrupts = <8>;
 183                                 clocks = <&v2m_oscclk2>, <&smbclk>;
 184                                 clock-names = "uartclk", "apb_pclk";
 185                         };
 186
 187                         wdt@0f000 {
 188                                 compatible = "arm,sp805", "arm,primecell";
 189                                 reg = <0x0f000 0x1000>;
 190                                 interrupts = <0>;
 191                                 clocks = <&v2m_refclk32khz>, <&smbclk>;
 192                                 clock-names = "wdogclk", "apb_pclk";
 193                         };
 194
 195                         v2m_timer01: timer@11000 {
 196                                 compatible = "arm,sp804", "arm,primecell";
 197                                 reg = <0x11000 0x1000>;
 198                                 interrupts = <2>;
 199                                 clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
 200                                 clock-names = "timclken1", "timclken2", "apb_pclk";
 201                         };
 202
 203                         v2m_timer23: timer@12000 {
 204                                 compatible = "arm,sp804", "arm,primecell";
 205                                 reg = <0x12000 0x1000>;
 206                                 interrupts = <3>;
 207                                 clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
 208                                 clock-names = "timclken1", "timclken2", "apb_pclk";
 209                         };
 210
 211                         /* DVI I2C bus */
 212                         v2m_i2c_dvi: i2c@16000 {
 213                                 compatible = "arm,versatile-i2c";
 214                                 reg = <0x16000 0x1000>;
 215
 216                                 #address-cells = <1>;
 217                                 #size-cells = <0>;
 218
 219                                 dvi-transmitter@39 {
 220                                         compatible = "sil,sii9022-tpi", "sil,sii9022";
 221                                         reg = <0x39>;
 222                                 };
 223
 224                                 dvi-transmitter@60 {
 225                                         compatible = "sil,sii9022-cpi", "sil,sii9022";
 226                                         reg = <0x60>;
 227                                 };
 228                         };
 229
 230                         rtc@17000 {
 231                                 compatible = "arm,pl031", "arm,primecell";
 232                                 reg = <0x17000 0x1000>;
 233                                 interrupts = <4>;
 234                                 clocks = <&smbclk>;
 235                                 clock-names = "apb_pclk";
 236                         };
 237
 238                         compact-flash@1a000 {
 239                                 compatible = "arm,vexpress-cf", "ata-generic";
 240                                 reg = <0x1a000 0x100
 241                                        0x1a100 0xf00>;
 242                                 reg-shift = <2>;
 243                         };
 244
 245                         clcd@1f000 {
 246                                 compatible = "arm,pl111", "arm,primecell";
 247                                 reg = <0x1f000 0x1000>;
 248                                 interrupts = <14>;
 249                                 clocks = <&v2m_oscclk1>, <&smbclk>;
 250                                 clock-names = "clcdclk", "apb_pclk";
 251                         };
 252                 };
 253
 254                 v2m_fixed_3v3: fixedregulator@0 {
 255                         compatible = "regulator-fixed";
 256                         regulator-name = "3V3";
 257                         regulator-min-microvolt = <3300000>;
 258                         regulator-max-microvolt = <3300000>;
 259                         regulator-always-on;
 260                 };
 261
 262                 v2m_clk24mhz: clk24mhz {
 263                         compatible = "fixed-clock";
 264                         #clock-cells = <0>;
 265                         clock-frequency = <24000000>;
 266                         clock-output-names = "v2m:clk24mhz";
 267                 };
 268
 269                 v2m_refclk1mhz: refclk1mhz {
 270                         compatible = "fixed-clock";
 271                         #clock-cells = <0>;
 272                         clock-frequency = <1000000>;
 273                         clock-output-names = "v2m:refclk1mhz";
 274                 };
 275
 276                 v2m_refclk32khz: refclk32khz {
 277                         compatible = "fixed-clock";
 278                         #clock-cells = <0>;
 279                         clock-frequency = <32768>;
 280                         clock-output-names = "v2m:refclk32khz";
 281                 };
 282
 283                 leds {
 284                         compatible = "gpio-leds";
 285
 286                         user@1 {
 287                                 label = "v2m:green:user1";
 288                                 gpios = <&v2m_led_gpios 0 0>;
 289                                 linux,default-trigger = "heartbeat";
 290                         };
 291
 292                         user@2 {
 293                                 label = "v2m:green:user2";
 294                                 gpios = <&v2m_led_gpios 1 0>;
 295                                 linux,default-trigger = "mmc0";
 296                         };
 297
 298                         user@3 {
 299                                 label = "v2m:green:user3";
 300                                 gpios = <&v2m_led_gpios 2 0>;
 301                                 linux,default-trigger = "cpu0";
 302                         };
 303
 304                         user@4 {
 305                                 label = "v2m:green:user4";
 306                                 gpios = <&v2m_led_gpios 3 0>;
 307                                 linux,default-trigger = "cpu1";
 308                         };
 309
 310                         user@5 {
 311                                 label = "v2m:green:user5";
 312                                 gpios = <&v2m_led_gpios 4 0>;
 313                                 linux,default-trigger = "cpu2";
 314                         };
 315
 316                         user@6 {
 317                                 label = "v2m:green:user6";
 318                                 gpios = <&v2m_led_gpios 5 0>;
 319                                 linux,default-trigger = "cpu3";
 320                         };
 321
 322                         user@7 {
 323                                 label = "v2m:green:user7";
 324                                 gpios = <&v2m_led_gpios 6 0>;
 325                                 linux,default-trigger = "cpu4";
 326                         };
 327
 328                         user@8 {
 329                                 label = "v2m:green:user8";
 330                                 gpios = <&v2m_led_gpios 7 0>;
 331                                 linux,default-trigger = "cpu5";
 332                         };
 333                 };
 334
 335                 mcc {
 336                         compatible = "arm,vexpress,config-bus";
 337                         arm,vexpress,config-bridge = <&v2m_sysreg>;
 338
 339                         osc@0 {
 340                                 /* MCC static memory clock */
 341                                 compatible = "arm,vexpress-osc";
 342                                 arm,vexpress-sysreg,func = <1 0>;
 343                                 freq-range = <25000000 60000000>;
 344                                 #clock-cells = <0>;
 345                                 clock-output-names = "v2m:oscclk0";
 346                         };
 347
 348                         v2m_oscclk1: osc@1 {
 349                                 /* CLCD clock */
 350                                 compatible = "arm,vexpress-osc";
 351                                 arm,vexpress-sysreg,func = <1 1>;
 352                                 freq-range = <23750000 63500000>;
 353                                 #clock-cells = <0>;
 354                                 clock-output-names = "v2m:oscclk1";
 355                         };
 356
 357                         v2m_oscclk2: osc@2 {
 358                                 /* IO FPGA peripheral clock */
 359                                 compatible = "arm,vexpress-osc";
 360                                 arm,vexpress-sysreg,func = <1 2>;
 361                                 freq-range = <24000000 24000000>;
 362                                 #clock-cells = <0>;
 363                                 clock-output-names = "v2m:oscclk2";
 364                         };
 365
 366                         volt@0 {
 367                                 /* Logic level voltage */
 368                                 compatible = "arm,vexpress-volt";
 369                                 arm,vexpress-sysreg,func = <2 0>;
 370                                 regulator-name = "VIO";
 371                                 regulator-always-on;
 372                                 label = "VIO";
 373                         };
 374
 375                         temp@0 {
 376                                 /* MCC internal operating temperature */
 377                                 compatible = "arm,vexpress-temp";
 378                                 arm,vexpress-sysreg,func = <4 0>;
 379                                 label = "MCC";
 380                         };
 381
 382                         reset@0 {
 383                                 compatible = "arm,vexpress-reset";
 384                                 arm,vexpress-sysreg,func = <5 0>;
 385                         };
 386
 387                         muxfpga@0 {
 388                                 compatible = "arm,vexpress-muxfpga";
 389                                 arm,vexpress-sysreg,func = <7 0>;
 390                         };
 391
 392                         shutdown@0 {
 393                                 compatible = "arm,vexpress-shutdown";
 394                                 arm,vexpress-sysreg,func = <8 0>;
 395                         };
 396
 397                         reboot@0 {
 398                                 compatible = "arm,vexpress-reboot";
 399                                 arm,vexpress-sysreg,func = <9 0>;
 400                         };
 401
 402                         dvimode@0 {
 403                                 compatible = "arm,vexpress-dvimode";
 404                                 arm,vexpress-sysreg,func = <11 0>;
 405                         };
 406                 };
 407         };