arch/arm/boot/dts/tegra124-nyan.dtsi

   1 #include <dt-bindings/input/input.h>
   2 #include "tegra124.dtsi"
   3
   4 / {
   5         aliases {
   6                 rtc0 = "/i2c@0,7000d000/pmic@40";
   7                 rtc1 = "/rtc@0,7000e000";
   8                 serial0 = &uarta;
   9         };
  10
  11         memory {
  12                 reg = <0x0 0x80000000 0x0 0x80000000>;
  13         };
  14
  15         host1x@0,50000000 {
  16                 hdmi@0,54280000 {
  17                         status = "okay";
  18
  19                         vdd-supply = <&vdd_3v3_hdmi>;
  20                         pll-supply = <&vdd_hdmi_pll>;
  21                         hdmi-supply = <&vdd_5v0_hdmi>;
  22
  23                         nvidia,ddc-i2c-bus = <&hdmi_ddc>;
  24                         nvidia,hpd-gpio =
  25                                 <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
  26                 };
  27
  28                 sor@0,54540000 {
  29                         status = "okay";
  30
  31                         nvidia,dpaux = <&dpaux>;
  32                         nvidia,panel = <&panel>;
  33                 };
  34
  35                 dpaux@0,545c0000 {
  36                         vdd-supply = <&vdd_3v3_panel>;
  37                         status = "okay";
  38                 };
  39         };
  40
  41         serial@0,70006000 {
  42                 /* Debug connector on the bottom of the board near SD card. */
  43                 status = "okay";
  44         };
  45
  46         pwm@0,7000a000 {
  47                 status = "okay";
  48         };
  49
  50         i2c@0,7000c000 {
  51                 status = "okay";
  52                 clock-frequency = <100000>;
  53
  54                 acodec: audio-codec@10 {
  55                         compatible = "maxim,max98090";
  56                         reg = <0x10>;
  57                         interrupt-parent = <&gpio>;
  58                         interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
  59                 };
  60
  61                 temperature-sensor@4c {
  62                         compatible = "ti,tmp451";
  63                         reg = <0x4c>;
  64                         interrupt-parent = <&gpio>;
  65                         interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
  66
  67                         #thermal-sensor-cells = <1>;
  68                 };
  69         };
  70
  71         i2c@0,7000c400 {
  72                 status = "okay";
  73                 clock-frequency = <100000>;
  74
  75                 trackpad@15 {
  76                         compatible = "elan,ekth3000";
  77                         reg = <0x15>;
  78                         interrupt-parent = <&gpio>;
  79                         interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>;
  80                         wakeup-source;
  81                 };
  82         };
  83
  84         i2c@0,7000c500 {
  85                 status = "okay";
  86                 clock-frequency = <400000>;
  87
  88                 tpm@20 {
  89                         compatible = "infineon,slb9645tt";
  90                         reg = <0x20>;
  91                 };
  92         };
  93
  94         hdmi_ddc: i2c@0,7000c700 {
  95                 status = "okay";
  96                 clock-frequency = <100000>;
  97         };
  98
  99         i2c@0,7000d000 {
 100                 status = "okay";
 101                 clock-frequency = <400000>;
 102
 103                 pmic: pmic@40 {
 104                         compatible = "ams,as3722";
 105                         reg = <0x40>;
 106                         interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
 107
 108                         ams,system-power-controller;
 109
 110                         #interrupt-cells = <2>;
 111                         interrupt-controller;
 112
 113                         gpio-controller;
 114                         #gpio-cells = <2>;
 115
 116                         pinctrl-names = "default";
 117                         pinctrl-0 = <&as3722_default>;
 118
 119                         as3722_default: pinmux {
 120                                 gpio0 {
 121                                         pins = "gpio0";
 122                                         function = "gpio";
 123                                         bias-pull-down;
 124                                 };
 125
 126                                 gpio1 {
 127                                         pins = "gpio1";
 128                                         function = "gpio";
 129                                         bias-pull-up;
 130                                 };
 131
 132                                 gpio2_4_7 {
 133                                         pins = "gpio2", "gpio4", "gpio7";
 134                                         function = "gpio";
 135                                         bias-pull-up;
 136                                 };
 137
 138                                 gpio3_6 {
 139                                         pins = "gpio3", "gpio6";
 140                                         bias-high-impedance;
 141                                 };
 142
 143                                 gpio5 {
 144                                         pins = "gpio5";
 145                                         function = "clk32k-out";
 146                                         bias-pull-down;
 147                                 };
 148                         };
 149
 150                         regulators {
 151                                 vsup-sd2-supply = <&vdd_5v0_sys>;
 152                                 vsup-sd3-supply = <&vdd_5v0_sys>;
 153                                 vsup-sd4-supply = <&vdd_5v0_sys>;
 154                                 vsup-sd5-supply = <&vdd_5v0_sys>;
 155                                 vin-ldo0-supply = <&vdd_1v35_lp0>;
 156                                 vin-ldo1-6-supply = <&vdd_3v3_run>;
 157                                 vin-ldo2-5-7-supply = <&vddio_1v8>;
 158                                 vin-ldo3-4-supply = <&vdd_3v3_sys>;
 159                                 vin-ldo9-10-supply = <&vdd_5v0_sys>;
 160                                 vin-ldo11-supply = <&vdd_3v3_run>;
 161
 162                                 sd0 {
 163                                         regulator-name = "+VDD_CPU_AP";
 164                                         regulator-min-microvolt = <700000>;
 165                                         regulator-max-microvolt = <1350000>;
 166                                         regulator-min-microamp = <3500000>;
 167                                         regulator-max-microamp = <3500000>;
 168                                         regulator-always-on;
 169                                         regulator-boot-on;
 170                                         ams,ext-control = <2>;
 171                                 };
 172
 173                                 sd1 {
 174                                         regulator-name = "+VDD_CORE";
 175                                         regulator-min-microvolt = <700000>;
 176                                         regulator-max-microvolt = <1350000>;
 177                                         regulator-min-microamp = <2500000>;
 178                                         regulator-max-microamp = <4000000>;
 179                                         regulator-always-on;
 180                                         regulator-boot-on;
 181                                         ams,ext-control = <1>;
 182                                 };
 183
 184                                 vdd_1v35_lp0: sd2 {
 185                                         regulator-name = "+1.35V_LP0(sd2)";
 186                                         regulator-min-microvolt = <1350000>;
 187                                         regulator-max-microvolt = <1350000>;
 188                                         regulator-always-on;
 189                                         regulator-boot-on;
 190                                 };
 191
 192                                 sd3 {
 193                                         regulator-name = "+1.35V_LP0(sd3)";
 194                                         regulator-min-microvolt = <1350000>;
 195                                         regulator-max-microvolt = <1350000>;
 196                                         regulator-always-on;
 197                                         regulator-boot-on;
 198                                 };
 199
 200                                 vdd_1v05_run: sd4 {
 201                                         regulator-name = "+1.05V_RUN";
 202                                         regulator-min-microvolt = <1050000>;
 203                                         regulator-max-microvolt = <1050000>;
 204                                 };
 205
 206                                 vddio_1v8: sd5 {
 207                                         regulator-name = "+1.8V_VDDIO";
 208                                         regulator-min-microvolt = <1800000>;
 209                                         regulator-max-microvolt = <1800000>;
 210                                         regulator-always-on;
 211                                 };
 212
 213                                 sd6 {
 214                                         regulator-name = "+VDD_GPU_AP";
 215                                         regulator-min-microvolt = <650000>;
 216                                         regulator-max-microvolt = <1200000>;
 217                                         regulator-min-microamp = <3500000>;
 218                                         regulator-max-microamp = <3500000>;
 219                                         regulator-boot-on;
 220                                         regulator-always-on;
 221                                 };
 222
 223                                 ldo0 {
 224                                         regulator-name = "+1.05V_RUN_AVDD";
 225                                         regulator-min-microvolt = <1050000>;
 226                                         regulator-max-microvolt = <1050000>;
 227                                         regulator-boot-on;
 228                                         regulator-always-on;
 229                                         ams,ext-control = <1>;
 230                                 };
 231
 232                                 ldo1 {
 233                                         regulator-name = "+1.8V_RUN_CAM";
 234                                         regulator-min-microvolt = <1800000>;
 235                                         regulator-max-microvolt = <1800000>;
 236                                 };
 237
 238                                 ldo2 {
 239                                         regulator-name = "+1.2V_GEN_AVDD";
 240                                         regulator-min-microvolt = <1200000>;
 241                                         regulator-max-microvolt = <1200000>;
 242                                         regulator-boot-on;
 243                                         regulator-always-on;
 244                                 };
 245
 246                                 ldo3 {
 247                                         regulator-name = "+1.00V_LP0_VDD_RTC";
 248                                         regulator-min-microvolt = <1000000>;
 249                                         regulator-max-microvolt = <1000000>;
 250                                         regulator-boot-on;
 251                                         regulator-always-on;
 252                                         ams,enable-tracking;
 253                                 };
 254
 255                                 vdd_run_cam: ldo4 {
 256                                         regulator-name = "+3.3V_RUN_CAM";
 257                                         regulator-min-microvolt = <2800000>;
 258                                         regulator-max-microvolt = <2800000>;
 259                                 };
 260
 261                                 ldo5 {
 262                                         regulator-name = "+1.2V_RUN_CAM_FRONT";
 263                                         regulator-min-microvolt = <1200000>;
 264                                         regulator-max-microvolt = <1200000>;
 265                                 };
 266
 267                                 vddio_sdmmc3: ldo6 {
 268                                         regulator-name = "+VDDIO_SDMMC3";
 269                                         regulator-min-microvolt = <1800000>;
 270                                         regulator-max-microvolt = <3300000>;
 271                                 };
 272
 273                                 ldo7 {
 274                                         regulator-name = "+1.05V_RUN_CAM_REAR";
 275                                         regulator-min-microvolt = <1050000>;
 276                                         regulator-max-microvolt = <1050000>;
 277                                 };
 278
 279                                 ldo9 {
 280                                         regulator-name = "+2.8V_RUN_TOUCH";
 281                                         regulator-min-microvolt = <2800000>;
 282                                         regulator-max-microvolt = <2800000>;
 283                                 };
 284
 285                                 ldo10 {
 286                                         regulator-name = "+2.8V_RUN_CAM_AF";
 287                                         regulator-min-microvolt = <2800000>;
 288                                         regulator-max-microvolt = <2800000>;
 289                                 };
 290
 291                                 ldo11 {
 292                                         regulator-name = "+1.8V_RUN_VPP_FUSE";
 293                                         regulator-min-microvolt = <1800000>;
 294                                         regulator-max-microvolt = <1800000>;
 295                                 };
 296                         };
 297                 };
 298         };
 299
 300         spi@0,7000d400 {
 301                 status = "okay";
 302
 303                 cros_ec: cros-ec@0 {
 304                         compatible = "google,cros-ec-spi";
 305                         spi-max-frequency = <3000000>;
 306                         interrupt-parent = <&gpio>;
 307                         interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;
 308                         reg = <0>;
 309
 310                         google,cros-ec-spi-msg-delay = <2000>;
 311
 312                         i2c-tunnel {
 313                                 compatible = "google,cros-ec-i2c-tunnel";
 314                                 #address-cells = <1>;
 315                                 #size-cells = <0>;
 316
 317                                 google,remote-bus = <0>;
 318
 319                                 charger: bq24735@9 {
 320                                         compatible = "ti,bq24735";
 321                                         reg = <0x9>;
 322                                         interrupt-parent = <&gpio>;
 323                                         interrupts = <TEGRA_GPIO(J, 0)
 324                                                         GPIO_ACTIVE_HIGH>;
 325                                         ti,ac-detect-gpios = <&gpio
 326                                                         TEGRA_GPIO(J, 0)
 327                                                         GPIO_ACTIVE_HIGH>;
 328                                 };
 329
 330                                 battery: sbs-battery@b {
 331                                         compatible = "sbs,sbs-battery";
 332                                         reg = <0xb>;
 333                                         sbs,i2c-retry-count = <2>;
 334                                         sbs,poll-retry-count = <10>;
 335                                         power-supplies = <&charger>;
 336                                 };
 337                         };
 338                 };
 339         };
 340
 341         spi@0,7000da00 {
 342                 status = "okay";
 343                 spi-max-frequency = <25000000>;
 344
 345                 flash@0 {
 346                         compatible = "winbond,w25q32dw";
 347                         spi-max-frequency = <25000000>;
 348                         reg = <0>;
 349                 };
 350         };
 351
 352         pmc@0,7000e400 {
 353                 nvidia,invert-interrupt;
 354                 nvidia,suspend-mode = <0>;
 355                 nvidia,cpu-pwr-good-time = <500>;
 356                 nvidia,cpu-pwr-off-time = <300>;
 357                 nvidia,core-pwr-good-time = <641 3845>;
 358                 nvidia,core-pwr-off-time = <61036>;
 359                 nvidia,core-power-req-active-high;
 360                 nvidia,sys-clock-req-active-high;
 361         };
 362
 363         hda@0,70030000 {
 364                 status = "okay";
 365         };
 366
 367         sdhci0_pwrseq: sdhci0_pwrseq {
 368                 compatible = "mmc-pwrseq-simple";
 369
 370                 reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
 371         };
 372
 373         sdhci@0,700b0000 { /* WiFi/BT on this bus */
 374                 status = "okay";
 375                 bus-width = <4>;
 376                 no-1-8-v;
 377                 non-removable;
 378                 mmc-pwrseq = <&sdhci0_pwrseq>;
 379                 vmmc-supply = <&vdd_3v3_lp0>;
 380                 vqmmc-supply = <&vddio_1v8>;
 381                 keep-power-in-suspend;
 382         };
 383
 384         sdhci@0,700b0400 { /* SD Card on this bus */
 385                 status = "okay";
 386                 cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
 387                 power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
 388                 bus-width = <4>;
 389                 no-1-8-v;
 390                 vqmmc-supply = <&vddio_sdmmc3>;
 391         };
 392
 393         sdhci@0,700b0600 { /* eMMC on this bus */
 394                 status = "okay";
 395                 bus-width = <8>;
 396                 no-1-8-v;
 397                 non-removable;
 398         };
 399
 400         ahub@0,70300000 {
 401                 i2s@0,70301100 {
 402                         status = "okay";
 403                 };
 404         };
 405
 406         usb@0,7d000000 { /* Rear external USB port. */
 407                 status = "okay";
 408         };
 409
 410         usb-phy@0,7d000000 {
 411                 status = "okay";
 412                 vbus-supply = <&vdd_usb1_vbus>;
 413         };
 414
 415         usb@0,7d004000 { /* Internal webcam. */
 416                 status = "okay";
 417         };
 418
 419         usb-phy@0,7d004000 {
 420                 status = "okay";
 421                 vbus-supply = <&vdd_run_cam>;
 422         };
 423
 424         usb@0,7d008000 { /* Left external USB port. */
 425                 status = "okay";
 426         };
 427
 428         usb-phy@0,7d008000 {
 429                 status = "okay";
 430                 vbus-supply = <&vdd_usb3_vbus>;
 431         };
 432
 433         backlight: backlight {
 434                 compatible = "pwm-backlight";
 435
 436                 enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
 437                 power-supply = <&vdd_led>;
 438                 pwms = <&pwm 1 1000000>;
 439
 440                 default-brightness-level = <224>;
 441                 brightness-levels =
 442                         <  0   1   2   3   4   5   6   7
 443                            8   9  10  11  12  13  14  15
 444                           16  17  18  19  20  21  22  23
 445                           24  25  26  27  28  29  30  31
 446                           32  33  34  35  36  37  38  39
 447                           40  41  42  43  44  45  46  47
 448                           48  49  50  51  52  53  54  55
 449                           56  57  58  59  60  61  62  63
 450                           64  65  66  67  68  69  70  71
 451                           72  73  74  75  76  77  78  79
 452                           80  81  82  83  84  85  86  87
 453                           88  89  90  91  92  93  94  95
 454                           96  97  98  99 100 101 102 103
 455                          104 105 106 107 108 109 110 111
 456                          112 113 114 115 116 117 118 119
 457                          120 121 122 123 124 125 126 127
 458                          128 129 130 131 132 133 134 135
 459                          136 137 138 139 140 141 142 143
 460                          144 145 146 147 148 149 150 151
 461                          152 153 154 155 156 157 158 159
 462                          160 161 162 163 164 165 166 167
 463                          168 169 170 171 172 173 174 175
 464                          176 177 178 179 180 181 182 183
 465                          184 185 186 187 188 189 190 191
 466                          192 193 194 195 196 197 198 199
 467                          200 201 202 203 204 205 206 207
 468                          208 209 210 211 212 213 214 215
 469                          216 217 218 219 220 221 222 223
 470                          224 225 226 227 228 229 230 231
 471                          232 233 234 235 236 237 238 239
 472                          240 241 242 243 244 245 246 247
 473                          248 249 250 251 252 253 254 255
 474                          256>;
 475         };
 476
 477         clocks {
 478                 compatible = "simple-bus";
 479                 #address-cells = <1>;
 480                 #size-cells = <0>;
 481
 482                 clk32k_in: clock@0 {
 483                         compatible = "fixed-clock";
 484                         reg = <0>;
 485                         #clock-cells = <0>;
 486                         clock-frequency = <32768>;
 487                 };
 488         };
 489
 490         gpio-keys {
 491                 compatible = "gpio-keys";
 492
 493                 lid {
 494                         label = "Lid";
 495                         gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>;
 496                         linux,input-type = <5>;
 497                         linux,code = <KEY_RESERVED>;
 498                         debounce-interval = <1>;
 499                         gpio-key,wakeup;
 500                 };
 501
 502                 power {
 503                         label = "Power";
 504                         gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
 505                         linux,code = <KEY_POWER>;
 506                         debounce-interval = <30>;
 507                         gpio-key,wakeup;
 508                 };
 509         };
 510
 511         regulators {
 512                 compatible = "simple-bus";
 513                 #address-cells = <1>;
 514                 #size-cells = <0>;
 515
 516                 vdd_mux: regulator@0 {
 517                         compatible = "regulator-fixed";
 518                         reg = <0>;
 519                         regulator-name = "+VDD_MUX";
 520                         regulator-min-microvolt = <12000000>;
 521                         regulator-max-microvolt = <12000000>;
 522                         regulator-always-on;
 523                         regulator-boot-on;
 524                 };
 525
 526                 vdd_5v0_sys: regulator@1 {
 527                         compatible = "regulator-fixed";
 528                         reg = <1>;
 529                         regulator-name = "+5V_SYS";
 530                         regulator-min-microvolt = <5000000>;
 531                         regulator-max-microvolt = <5000000>;
 532                         regulator-always-on;
 533                         regulator-boot-on;
 534                         vin-supply = <&vdd_mux>;
 535                 };
 536
 537                 vdd_3v3_sys: regulator@2 {
 538                         compatible = "regulator-fixed";
 539                         reg = <2>;
 540                         regulator-name = "+3.3V_SYS";
 541                         regulator-min-microvolt = <3300000>;
 542                         regulator-max-microvolt = <3300000>;
 543                         regulator-always-on;
 544                         regulator-boot-on;
 545                         vin-supply = <&vdd_mux>;
 546                 };
 547
 548                 vdd_3v3_run: regulator@3 {
 549                         compatible = "regulator-fixed";
 550                         reg = <3>;
 551                         regulator-name = "+3.3V_RUN";
 552                         regulator-min-microvolt = <3300000>;
 553                         regulator-max-microvolt = <3300000>;
 554                         regulator-always-on;
 555                         regulator-boot-on;
 556                         gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
 557                         enable-active-high;
 558                         vin-supply = <&vdd_3v3_sys>;
 559                 };
 560
 561                 vdd_3v3_hdmi: regulator@4 {
 562                         compatible = "regulator-fixed";
 563                         reg = <4>;
 564                         regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
 565                         regulator-min-microvolt = <3300000>;
 566                         regulator-max-microvolt = <3300000>;
 567                         vin-supply = <&vdd_3v3_run>;
 568                 };
 569
 570                 vdd_led: regulator@5 {
 571                         compatible = "regulator-fixed";
 572                         reg = <5>;
 573                         regulator-name = "+VDD_LED";
 574                         gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
 575                         enable-active-high;
 576                         vin-supply = <&vdd_mux>;
 577                 };
 578
 579                 vdd_5v0_ts: regulator@6 {
 580                         compatible = "regulator-fixed";
 581                         reg = <6>;
 582                         regulator-name = "+5V_VDD_TS_SW";
 583                         regulator-min-microvolt = <5000000>;
 584                         regulator-max-microvolt = <5000000>;
 585                         regulator-boot-on;
 586                         gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
 587                         enable-active-high;
 588                         vin-supply = <&vdd_5v0_sys>;
 589                 };
 590
 591                 vdd_usb1_vbus: regulator@7 {
 592                         compatible = "regulator-fixed";
 593                         reg = <7>;
 594                         regulator-name = "+5V_USB_HS";
 595                         regulator-min-microvolt = <5000000>;
 596                         regulator-max-microvolt = <5000000>;
 597                         gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
 598                         enable-active-high;
 599                         gpio-open-drain;
 600                         vin-supply = <&vdd_5v0_sys>;
 601                 };
 602
 603                 vdd_usb3_vbus: regulator@8 {
 604                         compatible = "regulator-fixed";
 605                         reg = <8>;
 606                         regulator-name = "+5V_USB_SS";
 607                         regulator-min-microvolt = <5000000>;
 608                         regulator-max-microvolt = <5000000>;
 609                         gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
 610                         enable-active-high;
 611                         gpio-open-drain;
 612                         vin-supply = <&vdd_5v0_sys>;
 613                 };
 614
 615                 vdd_3v3_panel: regulator@9 {
 616                         compatible = "regulator-fixed";
 617                         reg = <9>;
 618                         regulator-name = "+3.3V_PANEL";
 619                         regulator-min-microvolt = <3300000>;
 620                         regulator-max-microvolt = <3300000>;
 621                         gpio = <&pmic 4 GPIO_ACTIVE_HIGH>;
 622                         enable-active-high;
 623                         vin-supply = <&vdd_3v3_run>;
 624                 };
 625
 626                 vdd_3v3_lp0: regulator@10 {
 627                         compatible = "regulator-fixed";
 628                         reg = <10>;
 629                         regulator-name = "+3.3V_LP0";
 630                         regulator-min-microvolt = <3300000>;
 631                         regulator-max-microvolt = <3300000>;
 632                         /*
 633                          * TODO: find a way to wire this up with the USB EHCI
 634                          * controllers so that it can be enabled on demand.
 635                          */
 636                         regulator-always-on;
 637                         gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
 638                         enable-active-high;
 639                         vin-supply = <&vdd_3v3_sys>;
 640                 };
 641
 642                 vdd_hdmi_pll: regulator@11 {
 643                         compatible = "regulator-fixed";
 644                         reg = <11>;
 645                         regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
 646                         regulator-min-microvolt = <1050000>;
 647                         regulator-max-microvolt = <1050000>;
 648                         gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
 649                         vin-supply = <&vdd_1v05_run>;
 650                 };
 651
 652                 vdd_5v0_hdmi: regulator@12 {
 653                         compatible = "regulator-fixed";
 654                         reg = <12>;
 655                         regulator-name = "+5V_HDMI_CON";
 656                         regulator-min-microvolt = <5000000>;
 657                         regulator-max-microvolt = <5000000>;
 658                         gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
 659                         enable-active-high;
 660                         vin-supply = <&vdd_5v0_sys>;
 661                 };
 662         };
 663
 664         sound {
 665                 nvidia,audio-routing =
 666                         "Headphones", "HPR",
 667                         "Headphones", "HPL",
 668                         "Speakers", "SPKR",
 669                         "Speakers", "SPKL",
 670                         "Mic Jack", "MICBIAS",
 671                         "DMICL", "Int Mic",
 672                         "DMICR", "Int Mic",
 673                         "IN34", "Mic Jack";
 674
 675                 nvidia,i2s-controller = <&tegra_i2s1>;
 676                 nvidia,audio-codec = <&acodec>;
 677
 678                 clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
 679                          <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
 680                          <&tegra_car TEGRA124_CLK_EXTERN1>;
 681                 clock-names = "pll_a", "pll_a_out0", "mclk";
 682
 683                 nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>;
 684                 nvidia,mic-det-gpios =
 685                                 <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
 686         };
 687
 688         gpio-restart {
 689                 compatible = "gpio-restart";
 690                 gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
 691                 priority = <200>;
 692         };
 693 };
 694
 695 #include "cros-ec-keyboard.dtsi"