Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
[sfrench/cifs-2.6.git] / arch / arm / boot / dts / tegra124-nyan.dtsi
1 #include <dt-bindings/input/input.h>
2 #include "tegra124.dtsi"
3
4 / {
5         aliases {
6                 rtc0 = "/i2c@0,7000d000/pmic@40";
7                 rtc1 = "/rtc@0,7000e000";
8                 serial0 = &uarta;
9         };
10
11         chosen {
12                 stdout-path = "serial0:115200n8";
13         };
14
15         memory {
16                 reg = <0x0 0x80000000 0x0 0x80000000>;
17         };
18
19         host1x@0,50000000 {
20                 hdmi@0,54280000 {
21                         status = "okay";
22
23                         vdd-supply = <&vdd_3v3_hdmi>;
24                         pll-supply = <&vdd_hdmi_pll>;
25                         hdmi-supply = <&vdd_5v0_hdmi>;
26
27                         nvidia,ddc-i2c-bus = <&hdmi_ddc>;
28                         nvidia,hpd-gpio =
29                                 <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
30                 };
31
32                 sor@0,54540000 {
33                         status = "okay";
34
35                         nvidia,dpaux = <&dpaux>;
36                         nvidia,panel = <&panel>;
37                 };
38
39                 dpaux@0,545c0000 {
40                         vdd-supply = <&vdd_3v3_panel>;
41                         status = "okay";
42                 };
43         };
44
45         serial@0,70006000 {
46                 /* Debug connector on the bottom of the board near SD card. */
47                 status = "okay";
48         };
49
50         pwm@0,7000a000 {
51                 status = "okay";
52         };
53
54         i2c@0,7000c000 {
55                 status = "okay";
56                 clock-frequency = <100000>;
57
58                 acodec: audio-codec@10 {
59                         compatible = "maxim,max98090";
60                         reg = <0x10>;
61                         interrupt-parent = <&gpio>;
62                         interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
63                 };
64
65                 temperature-sensor@4c {
66                         compatible = "ti,tmp451";
67                         reg = <0x4c>;
68                         interrupt-parent = <&gpio>;
69                         interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
70
71                         #thermal-sensor-cells = <1>;
72                 };
73         };
74
75         i2c@0,7000c400 {
76                 status = "okay";
77                 clock-frequency = <100000>;
78
79                 trackpad@15 {
80                         compatible = "elan,ekth3000";
81                         reg = <0x15>;
82                         interrupt-parent = <&gpio>;
83                         interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>;
84                         wakeup-source;
85                 };
86         };
87
88         i2c@0,7000c500 {
89                 status = "okay";
90                 clock-frequency = <400000>;
91
92                 tpm@20 {
93                         compatible = "infineon,slb9645tt";
94                         reg = <0x20>;
95                 };
96         };
97
98         hdmi_ddc: i2c@0,7000c700 {
99                 status = "okay";
100                 clock-frequency = <100000>;
101         };
102
103         i2c@0,7000d000 {
104                 status = "okay";
105                 clock-frequency = <400000>;
106
107                 pmic: pmic@40 {
108                         compatible = "ams,as3722";
109                         reg = <0x40>;
110                         interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
111
112                         ams,system-power-controller;
113
114                         #interrupt-cells = <2>;
115                         interrupt-controller;
116
117                         gpio-controller;
118                         #gpio-cells = <2>;
119
120                         pinctrl-names = "default";
121                         pinctrl-0 = <&as3722_default>;
122
123                         as3722_default: pinmux {
124                                 gpio0 {
125                                         pins = "gpio0";
126                                         function = "gpio";
127                                         bias-pull-down;
128                                 };
129
130                                 gpio1 {
131                                         pins = "gpio1";
132                                         function = "gpio";
133                                         bias-pull-up;
134                                 };
135
136                                 gpio2_4_7 {
137                                         pins = "gpio2", "gpio4", "gpio7";
138                                         function = "gpio";
139                                         bias-pull-up;
140                                 };
141
142                                 gpio3_6 {
143                                         pins = "gpio3", "gpio6";
144                                         bias-high-impedance;
145                                 };
146
147                                 gpio5 {
148                                         pins = "gpio5";
149                                         function = "clk32k-out";
150                                         bias-pull-down;
151                                 };
152                         };
153
154                         regulators {
155                                 vsup-sd2-supply = <&vdd_5v0_sys>;
156                                 vsup-sd3-supply = <&vdd_5v0_sys>;
157                                 vsup-sd4-supply = <&vdd_5v0_sys>;
158                                 vsup-sd5-supply = <&vdd_5v0_sys>;
159                                 vin-ldo0-supply = <&vdd_1v35_lp0>;
160                                 vin-ldo1-6-supply = <&vdd_3v3_run>;
161                                 vin-ldo2-5-7-supply = <&vddio_1v8>;
162                                 vin-ldo3-4-supply = <&vdd_3v3_sys>;
163                                 vin-ldo9-10-supply = <&vdd_5v0_sys>;
164                                 vin-ldo11-supply = <&vdd_3v3_run>;
165
166                                 vdd_cpu: sd0 {
167                                         regulator-name = "+VDD_CPU_AP";
168                                         regulator-min-microvolt = <700000>;
169                                         regulator-max-microvolt = <1350000>;
170                                         regulator-min-microamp = <3500000>;
171                                         regulator-max-microamp = <3500000>;
172                                         regulator-always-on;
173                                         regulator-boot-on;
174                                         ams,ext-control = <2>;
175                                 };
176
177                                 sd1 {
178                                         regulator-name = "+VDD_CORE";
179                                         regulator-min-microvolt = <700000>;
180                                         regulator-max-microvolt = <1350000>;
181                                         regulator-min-microamp = <2500000>;
182                                         regulator-max-microamp = <4000000>;
183                                         regulator-always-on;
184                                         regulator-boot-on;
185                                         ams,ext-control = <1>;
186                                 };
187
188                                 vdd_1v35_lp0: sd2 {
189                                         regulator-name = "+1.35V_LP0(sd2)";
190                                         regulator-min-microvolt = <1350000>;
191                                         regulator-max-microvolt = <1350000>;
192                                         regulator-always-on;
193                                         regulator-boot-on;
194                                 };
195
196                                 sd3 {
197                                         regulator-name = "+1.35V_LP0(sd3)";
198                                         regulator-min-microvolt = <1350000>;
199                                         regulator-max-microvolt = <1350000>;
200                                         regulator-always-on;
201                                         regulator-boot-on;
202                                 };
203
204                                 vdd_1v05_run: sd4 {
205                                         regulator-name = "+1.05V_RUN";
206                                         regulator-min-microvolt = <1050000>;
207                                         regulator-max-microvolt = <1050000>;
208                                 };
209
210                                 vddio_1v8: sd5 {
211                                         regulator-name = "+1.8V_VDDIO";
212                                         regulator-min-microvolt = <1800000>;
213                                         regulator-max-microvolt = <1800000>;
214                                         regulator-always-on;
215                                 };
216
217                                 sd6 {
218                                         regulator-name = "+VDD_GPU_AP";
219                                         regulator-min-microvolt = <650000>;
220                                         regulator-max-microvolt = <1200000>;
221                                         regulator-min-microamp = <3500000>;
222                                         regulator-max-microamp = <3500000>;
223                                         regulator-boot-on;
224                                         regulator-always-on;
225                                 };
226
227                                 avdd_1v05_run: ldo0 {
228                                         regulator-name = "+1.05V_RUN_AVDD";
229                                         regulator-min-microvolt = <1050000>;
230                                         regulator-max-microvolt = <1050000>;
231                                         regulator-boot-on;
232                                         regulator-always-on;
233                                         ams,ext-control = <1>;
234                                 };
235
236                                 ldo1 {
237                                         regulator-name = "+1.8V_RUN_CAM";
238                                         regulator-min-microvolt = <1800000>;
239                                         regulator-max-microvolt = <1800000>;
240                                 };
241
242                                 ldo2 {
243                                         regulator-name = "+1.2V_GEN_AVDD";
244                                         regulator-min-microvolt = <1200000>;
245                                         regulator-max-microvolt = <1200000>;
246                                         regulator-boot-on;
247                                         regulator-always-on;
248                                 };
249
250                                 ldo3 {
251                                         regulator-name = "+1.00V_LP0_VDD_RTC";
252                                         regulator-min-microvolt = <1000000>;
253                                         regulator-max-microvolt = <1000000>;
254                                         regulator-boot-on;
255                                         regulator-always-on;
256                                         ams,enable-tracking;
257                                 };
258
259                                 vdd_run_cam: ldo4 {
260                                         regulator-name = "+3.3V_RUN_CAM";
261                                         regulator-min-microvolt = <2800000>;
262                                         regulator-max-microvolt = <2800000>;
263                                 };
264
265                                 ldo5 {
266                                         regulator-name = "+1.2V_RUN_CAM_FRONT";
267                                         regulator-min-microvolt = <1200000>;
268                                         regulator-max-microvolt = <1200000>;
269                                 };
270
271                                 vddio_sdmmc3: ldo6 {
272                                         regulator-name = "+VDDIO_SDMMC3";
273                                         regulator-min-microvolt = <1800000>;
274                                         regulator-max-microvolt = <3300000>;
275                                 };
276
277                                 ldo7 {
278                                         regulator-name = "+1.05V_RUN_CAM_REAR";
279                                         regulator-min-microvolt = <1050000>;
280                                         regulator-max-microvolt = <1050000>;
281                                 };
282
283                                 ldo9 {
284                                         regulator-name = "+2.8V_RUN_TOUCH";
285                                         regulator-min-microvolt = <2800000>;
286                                         regulator-max-microvolt = <2800000>;
287                                 };
288
289                                 ldo10 {
290                                         regulator-name = "+2.8V_RUN_CAM_AF";
291                                         regulator-min-microvolt = <2800000>;
292                                         regulator-max-microvolt = <2800000>;
293                                 };
294
295                                 ldo11 {
296                                         regulator-name = "+1.8V_RUN_VPP_FUSE";
297                                         regulator-min-microvolt = <1800000>;
298                                         regulator-max-microvolt = <1800000>;
299                                 };
300                         };
301                 };
302         };
303
304         spi@0,7000d400 {
305                 status = "okay";
306
307                 cros_ec: cros-ec@0 {
308                         compatible = "google,cros-ec-spi";
309                         spi-max-frequency = <3000000>;
310                         interrupt-parent = <&gpio>;
311                         interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;
312                         reg = <0>;
313
314                         google,cros-ec-spi-msg-delay = <2000>;
315
316                         i2c-tunnel {
317                                 compatible = "google,cros-ec-i2c-tunnel";
318                                 #address-cells = <1>;
319                                 #size-cells = <0>;
320
321                                 google,remote-bus = <0>;
322
323                                 charger: bq24735@9 {
324                                         compatible = "ti,bq24735";
325                                         reg = <0x9>;
326                                         interrupt-parent = <&gpio>;
327                                         interrupts = <TEGRA_GPIO(J, 0)
328                                                         GPIO_ACTIVE_HIGH>;
329                                         ti,ac-detect-gpios = <&gpio
330                                                         TEGRA_GPIO(J, 0)
331                                                         GPIO_ACTIVE_HIGH>;
332                                 };
333
334                                 battery: sbs-battery@b {
335                                         compatible = "sbs,sbs-battery";
336                                         reg = <0xb>;
337                                         sbs,i2c-retry-count = <2>;
338                                         sbs,poll-retry-count = <10>;
339                                         power-supplies = <&charger>;
340                                 };
341                         };
342                 };
343         };
344
345         spi@0,7000da00 {
346                 status = "okay";
347                 spi-max-frequency = <25000000>;
348
349                 flash@0 {
350                         compatible = "winbond,w25q32dw";
351                         spi-max-frequency = <25000000>;
352                         reg = <0>;
353                 };
354         };
355
356         pmc@0,7000e400 {
357                 nvidia,invert-interrupt;
358                 nvidia,suspend-mode = <0>;
359                 nvidia,cpu-pwr-good-time = <500>;
360                 nvidia,cpu-pwr-off-time = <300>;
361                 nvidia,core-pwr-good-time = <641 3845>;
362                 nvidia,core-pwr-off-time = <61036>;
363                 nvidia,core-power-req-active-high;
364                 nvidia,sys-clock-req-active-high;
365         };
366
367         hda@0,70030000 {
368                 status = "okay";
369         };
370
371         usb@0,70090000 {
372                 phys = <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */
373                        <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */
374                        <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */
375                        <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */
376                        <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */
377                 phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0", "usb3-1";
378
379                 avddio-pex-supply = <&vdd_1v05_run>;
380                 dvddio-pex-supply = <&vdd_1v05_run>;
381                 avdd-usb-supply = <&vdd_3v3_lp0>;
382                 avdd-pll-utmip-supply = <&vddio_1v8>;
383                 avdd-pll-erefe-supply = <&avdd_1v05_run>;
384                 avdd-usb-ss-pll-supply = <&vdd_1v05_run>;
385                 hvdd-usb-ss-supply = <&vdd_3v3_lp0>;
386                 hvdd-usb-ss-pll-e-supply = <&vdd_3v3_lp0>;
387
388                 status = "okay";
389         };
390
391         padctl@0,7009f000 {
392                 status = "okay";
393
394                 pads {
395                         usb2 {
396                                 status = "okay";
397
398                                 lanes {
399                                         usb2-0 {
400                                                 nvidia,function = "xusb";
401                                                 status = "okay";
402                                         };
403
404                                         usb2-1 {
405                                                 nvidia,function = "xusb";
406                                                 status = "okay";
407                                         };
408
409                                         usb2-2 {
410                                                 nvidia,function = "xusb";
411                                                 status = "okay";
412                                         };
413                                 };
414                         };
415
416                         pcie {
417                                 status = "okay";
418
419                                 lanes {
420                                         pcie-0 {
421                                                 nvidia,function = "usb3-ss";
422                                                 status = "okay";
423                                         };
424
425                                         pcie-1 {
426                                                 nvidia,function = "usb3-ss";
427                                                 status = "okay";
428                                         };
429                                 };
430                         };
431                 };
432
433                 ports {
434                         usb2-0 {
435                                 vbus-supply = <&vdd_usb1_vbus>;
436                                 status = "okay";
437                                 mode = "otg";
438                         };
439
440                         usb2-1 {
441                                 vbus-supply = <&vdd_run_cam>;
442                                 status = "okay";
443                                 mode = "host";
444                         };
445
446                         usb2-2 {
447                                 vbus-supply = <&vdd_usb3_vbus>;
448                                 status = "okay";
449                                 mode = "host";
450                         };
451
452                         usb3-0 {
453                                 nvidia,usb2-companion = <0>;
454                                 status = "okay";
455                         };
456
457                         usb3-1 {
458                                 nvidia,usb2-companion = <1>;
459                                 status = "okay";
460                         };
461                 };
462         };
463
464         sdhci0_pwrseq: sdhci0_pwrseq {
465                 compatible = "mmc-pwrseq-simple";
466
467                 reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
468         };
469
470         sdhci@0,700b0000 { /* WiFi/BT on this bus */
471                 status = "okay";
472                 bus-width = <4>;
473                 no-1-8-v;
474                 non-removable;
475                 mmc-pwrseq = <&sdhci0_pwrseq>;
476                 vmmc-supply = <&vdd_3v3_lp0>;
477                 vqmmc-supply = <&vddio_1v8>;
478                 keep-power-in-suspend;
479         };
480
481         sdhci@0,700b0400 { /* SD Card on this bus */
482                 status = "okay";
483                 cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
484                 power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
485                 bus-width = <4>;
486                 no-1-8-v;
487                 vqmmc-supply = <&vddio_sdmmc3>;
488         };
489
490         sdhci@0,700b0600 { /* eMMC on this bus */
491                 status = "okay";
492                 bus-width = <8>;
493                 no-1-8-v;
494                 non-removable;
495         };
496
497         /* CPU DFLL clock */
498         clock@0,70110000 {
499                 status = "disabled";
500                 vdd-cpu-supply = <&vdd_cpu>;
501                 nvidia,i2c-fs-rate = <400000>;
502         };
503
504         ahub@0,70300000 {
505                 i2s@0,70301100 {
506                         status = "okay";
507                 };
508         };
509
510         backlight: backlight {
511                 compatible = "pwm-backlight";
512
513                 enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
514                 power-supply = <&vdd_led>;
515                 pwms = <&pwm 1 1000000>;
516
517                 default-brightness-level = <224>;
518                 brightness-levels =
519                         <  0   1   2   3   4   5   6   7
520                            8   9  10  11  12  13  14  15
521                           16  17  18  19  20  21  22  23
522                           24  25  26  27  28  29  30  31
523                           32  33  34  35  36  37  38  39
524                           40  41  42  43  44  45  46  47
525                           48  49  50  51  52  53  54  55
526                           56  57  58  59  60  61  62  63
527                           64  65  66  67  68  69  70  71
528                           72  73  74  75  76  77  78  79
529                           80  81  82  83  84  85  86  87
530                           88  89  90  91  92  93  94  95
531                           96  97  98  99 100 101 102 103
532                          104 105 106 107 108 109 110 111
533                          112 113 114 115 116 117 118 119
534                          120 121 122 123 124 125 126 127
535                          128 129 130 131 132 133 134 135
536                          136 137 138 139 140 141 142 143
537                          144 145 146 147 148 149 150 151
538                          152 153 154 155 156 157 158 159
539                          160 161 162 163 164 165 166 167
540                          168 169 170 171 172 173 174 175
541                          176 177 178 179 180 181 182 183
542                          184 185 186 187 188 189 190 191
543                          192 193 194 195 196 197 198 199
544                          200 201 202 203 204 205 206 207
545                          208 209 210 211 212 213 214 215
546                          216 217 218 219 220 221 222 223
547                          224 225 226 227 228 229 230 231
548                          232 233 234 235 236 237 238 239
549                          240 241 242 243 244 245 246 247
550                          248 249 250 251 252 253 254 255
551                          256>;
552         };
553
554         clocks {
555                 compatible = "simple-bus";
556                 #address-cells = <1>;
557                 #size-cells = <0>;
558
559                 clk32k_in: clock@0 {
560                         compatible = "fixed-clock";
561                         reg = <0>;
562                         #clock-cells = <0>;
563                         clock-frequency = <32768>;
564                 };
565         };
566
567         cpus {
568                 cpu@0 {
569                         vdd-cpu-supply = <&vdd_cpu>;
570                 };
571         };
572
573         gpio-keys {
574                 compatible = "gpio-keys";
575
576                 lid {
577                         label = "Lid";
578                         gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>;
579                         linux,input-type = <5>;
580                         linux,code = <KEY_RESERVED>;
581                         debounce-interval = <1>;
582                         wakeup-source;
583                 };
584
585                 power {
586                         label = "Power";
587                         gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
588                         linux,code = <KEY_POWER>;
589                         debounce-interval = <30>;
590                         wakeup-source;
591                 };
592         };
593
594         regulators {
595                 compatible = "simple-bus";
596                 #address-cells = <1>;
597                 #size-cells = <0>;
598
599                 vdd_mux: regulator@0 {
600                         compatible = "regulator-fixed";
601                         reg = <0>;
602                         regulator-name = "+VDD_MUX";
603                         regulator-min-microvolt = <12000000>;
604                         regulator-max-microvolt = <12000000>;
605                         regulator-always-on;
606                         regulator-boot-on;
607                 };
608
609                 vdd_5v0_sys: regulator@1 {
610                         compatible = "regulator-fixed";
611                         reg = <1>;
612                         regulator-name = "+5V_SYS";
613                         regulator-min-microvolt = <5000000>;
614                         regulator-max-microvolt = <5000000>;
615                         regulator-always-on;
616                         regulator-boot-on;
617                         vin-supply = <&vdd_mux>;
618                 };
619
620                 vdd_3v3_sys: regulator@2 {
621                         compatible = "regulator-fixed";
622                         reg = <2>;
623                         regulator-name = "+3.3V_SYS";
624                         regulator-min-microvolt = <3300000>;
625                         regulator-max-microvolt = <3300000>;
626                         regulator-always-on;
627                         regulator-boot-on;
628                         vin-supply = <&vdd_mux>;
629                 };
630
631                 vdd_3v3_run: regulator@3 {
632                         compatible = "regulator-fixed";
633                         reg = <3>;
634                         regulator-name = "+3.3V_RUN";
635                         regulator-min-microvolt = <3300000>;
636                         regulator-max-microvolt = <3300000>;
637                         regulator-always-on;
638                         regulator-boot-on;
639                         gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
640                         enable-active-high;
641                         vin-supply = <&vdd_3v3_sys>;
642                 };
643
644                 vdd_3v3_hdmi: regulator@4 {
645                         compatible = "regulator-fixed";
646                         reg = <4>;
647                         regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
648                         regulator-min-microvolt = <3300000>;
649                         regulator-max-microvolt = <3300000>;
650                         vin-supply = <&vdd_3v3_run>;
651                 };
652
653                 vdd_led: regulator@5 {
654                         compatible = "regulator-fixed";
655                         reg = <5>;
656                         regulator-name = "+VDD_LED";
657                         gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
658                         enable-active-high;
659                         vin-supply = <&vdd_mux>;
660                 };
661
662                 vdd_5v0_ts: regulator@6 {
663                         compatible = "regulator-fixed";
664                         reg = <6>;
665                         regulator-name = "+5V_VDD_TS_SW";
666                         regulator-min-microvolt = <5000000>;
667                         regulator-max-microvolt = <5000000>;
668                         regulator-boot-on;
669                         gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
670                         enable-active-high;
671                         vin-supply = <&vdd_5v0_sys>;
672                 };
673
674                 vdd_usb1_vbus: regulator@7 {
675                         compatible = "regulator-fixed";
676                         reg = <7>;
677                         regulator-name = "+5V_USB_HS";
678                         regulator-min-microvolt = <5000000>;
679                         regulator-max-microvolt = <5000000>;
680                         gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
681                         enable-active-high;
682                         gpio-open-drain;
683                         vin-supply = <&vdd_5v0_sys>;
684                 };
685
686                 vdd_usb3_vbus: regulator@8 {
687                         compatible = "regulator-fixed";
688                         reg = <8>;
689                         regulator-name = "+5V_USB_SS";
690                         regulator-min-microvolt = <5000000>;
691                         regulator-max-microvolt = <5000000>;
692                         gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
693                         enable-active-high;
694                         gpio-open-drain;
695                         vin-supply = <&vdd_5v0_sys>;
696                 };
697
698                 vdd_3v3_panel: regulator@9 {
699                         compatible = "regulator-fixed";
700                         reg = <9>;
701                         regulator-name = "+3.3V_PANEL";
702                         regulator-min-microvolt = <3300000>;
703                         regulator-max-microvolt = <3300000>;
704                         gpio = <&pmic 4 GPIO_ACTIVE_HIGH>;
705                         enable-active-high;
706                         vin-supply = <&vdd_3v3_run>;
707                 };
708
709                 vdd_3v3_lp0: regulator@10 {
710                         compatible = "regulator-fixed";
711                         reg = <10>;
712                         regulator-name = "+3.3V_LP0";
713                         regulator-min-microvolt = <3300000>;
714                         regulator-max-microvolt = <3300000>;
715                         /*
716                          * TODO: find a way to wire this up with the USB EHCI
717                          * controllers so that it can be enabled on demand.
718                          */
719                         regulator-always-on;
720                         gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
721                         enable-active-high;
722                         vin-supply = <&vdd_3v3_sys>;
723                 };
724
725                 vdd_hdmi_pll: regulator@11 {
726                         compatible = "regulator-fixed";
727                         reg = <11>;
728                         regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
729                         regulator-min-microvolt = <1050000>;
730                         regulator-max-microvolt = <1050000>;
731                         gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
732                         vin-supply = <&vdd_1v05_run>;
733                 };
734
735                 vdd_5v0_hdmi: regulator@12 {
736                         compatible = "regulator-fixed";
737                         reg = <12>;
738                         regulator-name = "+5V_HDMI_CON";
739                         regulator-min-microvolt = <5000000>;
740                         regulator-max-microvolt = <5000000>;
741                         gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
742                         enable-active-high;
743                         vin-supply = <&vdd_5v0_sys>;
744                 };
745         };
746
747         sound {
748                 nvidia,audio-routing =
749                         "Headphones", "HPR",
750                         "Headphones", "HPL",
751                         "Speakers", "SPKR",
752                         "Speakers", "SPKL",
753                         "Mic Jack", "MICBIAS",
754                         "DMICL", "Int Mic",
755                         "DMICR", "Int Mic",
756                         "IN34", "Mic Jack";
757
758                 nvidia,i2s-controller = <&tegra_i2s1>;
759                 nvidia,audio-codec = <&acodec>;
760
761                 clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
762                          <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
763                          <&tegra_car TEGRA124_CLK_EXTERN1>;
764                 clock-names = "pll_a", "pll_a_out0", "mclk";
765
766                 nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>;
767                 nvidia,mic-det-gpios =
768                                 <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
769         };
770
771         gpio-restart {
772                 compatible = "gpio-restart";
773                 gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
774                 priority = <200>;
775         };
776 };
777
778 #include "cros-ec-keyboard.dtsi"