arch/arm/boot/dts/sunxi-h3-h5.dtsi

   1 /*
   2  * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
   3  *
   4  * This file is dual-licensed: you can use it either under the terms
   5  * of the GPL or the X11 license, at your option. Note that this dual
   6  * licensing only applies to this file, and not this project as a
   7  * whole.
   8  *
   9  *  a) This file is free software; you can redistribute it and/or
  10  *     modify it under the terms of the GNU General Public License as
  11  *     published by the Free Software Foundation; either version 2 of the
  12  *     License, or (at your option) any later version.
  13  *
  14  *     This file is distributed in the hope that it will be useful,
  15  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  *     GNU General Public License for more details.
  18  *
  19  * Or, alternatively,
  20  *
  21  *  b) Permission is hereby granted, free of charge, to any person
  22  *     obtaining a copy of this software and associated documentation
  23  *     files (the "Software"), to deal in the Software without
  24  *     restriction, including without limitation the rights to use,
  25  *     copy, modify, merge, publish, distribute, sublicense, and/or
  26  *     sell copies of the Software, and to permit persons to whom the
  27  *     Software is furnished to do so, subject to the following
  28  *     conditions:
  29  *
  30  *     The above copyright notice and this permission notice shall be
  31  *     included in all copies or substantial portions of the Software.
  32  *
  33  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  34  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  35  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  36  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  37  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  38  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  39  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  40  *     OTHER DEALINGS IN THE SOFTWARE.
  41  */
  42
  43 #include <dt-bindings/clock/sun8i-de2.h>
  44 #include <dt-bindings/clock/sun8i-h3-ccu.h>
  45 #include <dt-bindings/clock/sun8i-r-ccu.h>
  46 #include <dt-bindings/interrupt-controller/arm-gic.h>
  47 #include <dt-bindings/reset/sun8i-de2.h>
  48 #include <dt-bindings/reset/sun8i-h3-ccu.h>
  49 #include <dt-bindings/reset/sun8i-r-ccu.h>
  50
  51 / {
  52         interrupt-parent = <&gic>;
  53         #address-cells = <1>;
  54         #size-cells = <1>;
  55
  56         chosen {
  57                 #address-cells = <1>;
  58                 #size-cells = <1>;
  59                 ranges;
  60
  61                 framebuffer-hdmi {
  62                         compatible = "allwinner,simple-framebuffer",
  63                                      "simple-framebuffer";
  64                         allwinner,pipeline = "mixer0-lcd0-hdmi";
  65                         clocks = <&display_clocks CLK_MIXER0>,
  66                                  <&ccu CLK_TCON0>, <&ccu CLK_HDMI>;
  67                         status = "disabled";
  68                 };
  69
  70                 framebuffer-tve {
  71                         compatible = "allwinner,simple-framebuffer",
  72                                      "simple-framebuffer";
  73                         allwinner,pipeline = "mixer1-lcd1-tve";
  74                         clocks = <&display_clocks CLK_MIXER1>,
  75                                  <&ccu CLK_TVE>;
  76                         status = "disabled";
  77                 };
  78         };
  79
  80         clocks {
  81                 #address-cells = <1>;
  82                 #size-cells = <1>;
  83                 ranges;
  84
  85                 osc24M: osc24M_clk {
  86                         #clock-cells = <0>;
  87                         compatible = "fixed-clock";
  88                         clock-frequency = <24000000>;
  89                         clock-accuracy = <50000>;
  90                         clock-output-names = "osc24M";
  91                 };
  92
  93                 osc32k: osc32k_clk {
  94                         #clock-cells = <0>;
  95                         compatible = "fixed-clock";
  96                         clock-frequency = <32768>;
  97                         clock-accuracy = <50000>;
  98                         clock-output-names = "ext_osc32k";
  99                 };
 100         };
 101
 102         de: display-engine {
 103                 compatible = "allwinner,sun8i-h3-display-engine";
 104                 allwinner,pipelines = <&mixer0>;
 105                 status = "disabled";
 106         };
 107
 108         soc {
 109                 compatible = "simple-bus";
 110                 #address-cells = <1>;
 111                 #size-cells = <1>;
 112                 ranges;
 113
 114                 display_clocks: clock@1000000 {
 115                         /* compatible is in per SoC .dtsi file */
 116                         reg = <0x01000000 0x100000>;
 117                         clocks = <&ccu CLK_BUS_DE>,
 118                                  <&ccu CLK_DE>;
 119                         clock-names = "bus",
 120                                       "mod";
 121                         resets = <&ccu RST_BUS_DE>;
 122                         #clock-cells = <1>;
 123                         #reset-cells = <1>;
 124                 };
 125
 126                 mixer0: mixer@1100000 {
 127                         compatible = "allwinner,sun8i-h3-de2-mixer-0";
 128                         reg = <0x01100000 0x100000>;
 129                         clocks = <&display_clocks CLK_BUS_MIXER0>,
 130                                  <&display_clocks CLK_MIXER0>;
 131                         clock-names = "bus",
 132                                       "mod";
 133                         resets = <&display_clocks RST_MIXER0>;
 134
 135                         ports {
 136                                 #address-cells = <1>;
 137                                 #size-cells = <0>;
 138
 139                                 mixer0_out: port@1 {
 140                                         reg = <1>;
 141
 142                                         mixer0_out_tcon0: endpoint {
 143                                                 remote-endpoint = <&tcon0_in_mixer0>;
 144                                         };
 145                                 };
 146                         };
 147                 };
 148
 149                 dma: dma-controller@1c02000 {
 150                         compatible = "allwinner,sun8i-h3-dma";
 151                         reg = <0x01c02000 0x1000>;
 152                         interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 153                         clocks = <&ccu CLK_BUS_DMA>;
 154                         resets = <&ccu RST_BUS_DMA>;
 155                         #dma-cells = <1>;
 156                 };
 157
 158                 tcon0: lcd-controller@1c0c000 {
 159                         compatible = "allwinner,sun8i-h3-tcon-tv",
 160                                      "allwinner,sun8i-a83t-tcon-tv";
 161                         reg = <0x01c0c000 0x1000>;
 162                         interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 163                         clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
 164                         clock-names = "ahb", "tcon-ch1";
 165                         resets = <&ccu RST_BUS_TCON0>;
 166                         reset-names = "lcd";
 167
 168                         ports {
 169                                 #address-cells = <1>;
 170                                 #size-cells = <0>;
 171
 172                                 tcon0_in: port@0 {
 173                                         reg = <0>;
 174
 175                                         tcon0_in_mixer0: endpoint {
 176                                                 remote-endpoint = <&mixer0_out_tcon0>;
 177                                         };
 178                                 };
 179
 180                                 tcon0_out: port@1 {
 181                                         #address-cells = <1>;
 182                                         #size-cells = <0>;
 183                                         reg = <1>;
 184
 185                                         tcon0_out_hdmi: endpoint@1 {
 186                                                 reg = <1>;
 187                                                 remote-endpoint = <&hdmi_in_tcon0>;
 188                                         };
 189                                 };
 190                         };
 191                 };
 192
 193                 mmc0: mmc@1c0f000 {
 194                         /* compatible and clocks are in per SoC .dtsi file */
 195                         reg = <0x01c0f000 0x1000>;
 196                         pinctrl-names = "default";
 197                         pinctrl-0 = <&mmc0_pins>;
 198                         resets = <&ccu RST_BUS_MMC0>;
 199                         reset-names = "ahb";
 200                         interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 201                         status = "disabled";
 202                         #address-cells = <1>;
 203                         #size-cells = <0>;
 204                 };
 205
 206                 mmc1: mmc@1c10000 {
 207                         /* compatible and clocks are in per SoC .dtsi file */
 208                         reg = <0x01c10000 0x1000>;
 209                         pinctrl-names = "default";
 210                         pinctrl-0 = <&mmc1_pins>;
 211                         resets = <&ccu RST_BUS_MMC1>;
 212                         reset-names = "ahb";
 213                         interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 214                         status = "disabled";
 215                         #address-cells = <1>;
 216                         #size-cells = <0>;
 217                 };
 218
 219                 mmc2: mmc@1c11000 {
 220                         /* compatible and clocks are in per SoC .dtsi file */
 221                         reg = <0x01c11000 0x1000>;
 222                         resets = <&ccu RST_BUS_MMC2>;
 223                         reset-names = "ahb";
 224                         interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 225                         status = "disabled";
 226                         #address-cells = <1>;
 227                         #size-cells = <0>;
 228                 };
 229
 230                 sid: eeprom@1c14000 {
 231                         /* compatible is in per SoC .dtsi file */
 232                         reg = <0x1c14000 0x400>;
 233                 };
 234
 235                 usb_otg: usb@1c19000 {
 236                         compatible = "allwinner,sun8i-h3-musb";
 237                         reg = <0x01c19000 0x400>;
 238                         clocks = <&ccu CLK_BUS_OTG>;
 239                         resets = <&ccu RST_BUS_OTG>;
 240                         interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 241                         interrupt-names = "mc";
 242                         phys = <&usbphy 0>;
 243                         phy-names = "usb";
 244                         extcon = <&usbphy 0>;
 245                         dr_mode = "otg";
 246                         status = "disabled";
 247                 };
 248
 249                 usbphy: phy@1c19400 {
 250                         compatible = "allwinner,sun8i-h3-usb-phy";
 251                         reg = <0x01c19400 0x2c>,
 252                               <0x01c1a800 0x4>,
 253                               <0x01c1b800 0x4>,
 254                               <0x01c1c800 0x4>,
 255                               <0x01c1d800 0x4>;
 256                         reg-names = "phy_ctrl",
 257                                     "pmu0",
 258                                     "pmu1",
 259                                     "pmu2",
 260                                     "pmu3";
 261                         clocks = <&ccu CLK_USB_PHY0>,
 262                                  <&ccu CLK_USB_PHY1>,
 263                                  <&ccu CLK_USB_PHY2>,
 264                                  <&ccu CLK_USB_PHY3>;
 265                         clock-names = "usb0_phy",
 266                                       "usb1_phy",
 267                                       "usb2_phy",
 268                                       "usb3_phy";
 269                         resets = <&ccu RST_USB_PHY0>,
 270                                  <&ccu RST_USB_PHY1>,
 271                                  <&ccu RST_USB_PHY2>,
 272                                  <&ccu RST_USB_PHY3>;
 273                         reset-names = "usb0_reset",
 274                                       "usb1_reset",
 275                                       "usb2_reset",
 276                                       "usb3_reset";
 277                         status = "disabled";
 278                         #phy-cells = <1>;
 279                 };
 280
 281                 ehci0: usb@1c1a000 {
 282                         compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
 283                         reg = <0x01c1a000 0x100>;
 284                         interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 285                         clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>;
 286                         resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
 287                         status = "disabled";
 288                 };
 289
 290                 ohci0: usb@1c1a400 {
 291                         compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
 292                         reg = <0x01c1a400 0x100>;
 293                         interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 294                         clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>,
 295                                  <&ccu CLK_USB_OHCI0>;
 296                         resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
 297                         status = "disabled";
 298                 };
 299
 300                 ehci1: usb@1c1b000 {
 301                         compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
 302                         reg = <0x01c1b000 0x100>;
 303                         interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 304                         clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>;
 305                         resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
 306                         phys = <&usbphy 1>;
 307                         status = "disabled";
 308                 };
 309
 310                 ohci1: usb@1c1b400 {
 311                         compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
 312                         reg = <0x01c1b400 0x100>;
 313                         interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 314                         clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>,
 315                                  <&ccu CLK_USB_OHCI1>;
 316                         resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
 317                         phys = <&usbphy 1>;
 318                         status = "disabled";
 319                 };
 320
 321                 ehci2: usb@1c1c000 {
 322                         compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
 323                         reg = <0x01c1c000 0x100>;
 324                         interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 325                         clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>;
 326                         resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
 327                         phys = <&usbphy 2>;
 328                         status = "disabled";
 329                 };
 330
 331                 ohci2: usb@1c1c400 {
 332                         compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
 333                         reg = <0x01c1c400 0x100>;
 334                         interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 335                         clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>,
 336                                  <&ccu CLK_USB_OHCI2>;
 337                         resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
 338                         phys = <&usbphy 2>;
 339                         status = "disabled";
 340                 };
 341
 342                 ehci3: usb@1c1d000 {
 343                         compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
 344                         reg = <0x01c1d000 0x100>;
 345                         interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 346                         clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>;
 347                         resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
 348                         phys = <&usbphy 3>;
 349                         status = "disabled";
 350                 };
 351
 352                 ohci3: usb@1c1d400 {
 353                         compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
 354                         reg = <0x01c1d400 0x100>;
 355                         interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
 356                         clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>,
 357                                  <&ccu CLK_USB_OHCI3>;
 358                         resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
 359                         phys = <&usbphy 3>;
 360                         status = "disabled";
 361                 };
 362
 363                 ccu: clock@1c20000 {
 364                         /* compatible is in per SoC .dtsi file */
 365                         reg = <0x01c20000 0x400>;
 366                         clocks = <&osc24M>, <&rtc 0>;
 367                         clock-names = "hosc", "losc";
 368                         #clock-cells = <1>;
 369                         #reset-cells = <1>;
 370                 };
 371
 372                 pio: pinctrl@1c20800 {
 373                         /* compatible is in per SoC .dtsi file */
 374                         reg = <0x01c20800 0x400>;
 375                         interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
 376                                      <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 377                         clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
 378                         clock-names = "apb", "hosc", "losc";
 379                         gpio-controller;
 380                         #gpio-cells = <3>;
 381                         interrupt-controller;
 382                         #interrupt-cells = <3>;
 383
 384                         csi_pins: csi-pins {
 385                                 pins = "PE0", "PE2", "PE3", "PE4", "PE5",
 386                                        "PE6", "PE7", "PE8", "PE9", "PE10",
 387                                        "PE11";
 388                                 function = "csi";
 389                         };
 390
 391                         emac_rgmii_pins: emac-rgmii-pins {
 392                                 pins = "PD0", "PD1", "PD2", "PD3", "PD4",
 393                                        "PD5", "PD7", "PD8", "PD9", "PD10",
 394                                        "PD12", "PD13", "PD15", "PD16", "PD17";
 395                                 function = "emac";
 396                                 drive-strength = <40>;
 397                         };
 398
 399                         i2c0_pins: i2c0-pins {
 400                                 pins = "PA11", "PA12";
 401                                 function = "i2c0";
 402                         };
 403
 404                         i2c1_pins: i2c1-pins {
 405                                 pins = "PA18", "PA19";
 406                                 function = "i2c1";
 407                         };
 408
 409                         i2c2_pins: i2c2-pins {
 410                                 pins = "PE12", "PE13";
 411                                 function = "i2c2";
 412                         };
 413
 414                         mmc0_pins: mmc0-pins {
 415                                 pins = "PF0", "PF1", "PF2", "PF3",
 416                                        "PF4", "PF5";
 417                                 function = "mmc0";
 418                                 drive-strength = <30>;
 419                                 bias-pull-up;
 420                         };
 421
 422                         mmc1_pins: mmc1-pins {
 423                                 pins = "PG0", "PG1", "PG2", "PG3",
 424                                        "PG4", "PG5";
 425                                 function = "mmc1";
 426                                 drive-strength = <30>;
 427                                 bias-pull-up;
 428                         };
 429
 430                         mmc2_8bit_pins: mmc2-8bit-pins {
 431                                 pins = "PC5", "PC6", "PC8",
 432                                        "PC9", "PC10", "PC11",
 433                                        "PC12", "PC13", "PC14",
 434                                        "PC15", "PC16";
 435                                 function = "mmc2";
 436                                 drive-strength = <30>;
 437                                 bias-pull-up;
 438                         };
 439
 440                         spdif_tx_pin: spdif-tx-pin {
 441                                 pins = "PA17";
 442                                 function = "spdif";
 443                         };
 444
 445                         spi0_pins: spi0-pins {
 446                                 pins = "PC0", "PC1", "PC2", "PC3";
 447                                 function = "spi0";
 448                         };
 449
 450                         spi1_pins: spi1-pins {
 451                                 pins = "PA15", "PA16", "PA14", "PA13";
 452                                 function = "spi1";
 453                         };
 454
 455                         uart0_pa_pins: uart0-pa-pins {
 456                                 pins = "PA4", "PA5";
 457                                 function = "uart0";
 458                         };
 459
 460                         uart1_pins: uart1-pins {
 461                                 pins = "PG6", "PG7";
 462                                 function = "uart1";
 463                         };
 464
 465                         uart1_rts_cts_pins: uart1-rts-cts-pins {
 466                                 pins = "PG8", "PG9";
 467                                 function = "uart1";
 468                         };
 469
 470                         uart2_pins: uart2-pins {
 471                                 pins = "PA0", "PA1";
 472                                 function = "uart2";
 473                         };
 474
 475                         uart3_pins: uart3-pins {
 476                                 pins = "PA13", "PA14";
 477                                 function = "uart3";
 478                         };
 479
 480                         uart3_rts_cts_pins: uart3-rts-cts-pins {
 481                                 pins = "PA15", "PA16";
 482                                 function = "uart3";
 483                         };
 484                 };
 485
 486                 timer@1c20c00 {
 487                         compatible = "allwinner,sun8i-a23-timer";
 488                         reg = <0x01c20c00 0xa0>;
 489                         interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
 490                                      <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 491                         clocks = <&osc24M>;
 492                 };
 493
 494                 emac: ethernet@1c30000 {
 495                         compatible = "allwinner,sun8i-h3-emac";
 496                         syscon = <&syscon>;
 497                         reg = <0x01c30000 0x10000>;
 498                         interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 499                         interrupt-names = "macirq";
 500                         resets = <&ccu RST_BUS_EMAC>;
 501                         reset-names = "stmmaceth";
 502                         clocks = <&ccu CLK_BUS_EMAC>;
 503                         clock-names = "stmmaceth";
 504                         status = "disabled";
 505
 506                         mdio: mdio {
 507                                 #address-cells = <1>;
 508                                 #size-cells = <0>;
 509                                 compatible = "snps,dwmac-mdio";
 510                         };
 511
 512                         mdio-mux {
 513                                 compatible = "allwinner,sun8i-h3-mdio-mux";
 514                                 #address-cells = <1>;
 515                                 #size-cells = <0>;
 516
 517                                 mdio-parent-bus = <&mdio>;
 518                                 /* Only one MDIO is usable at the time */
 519                                 internal_mdio: mdio@1 {
 520                                         compatible = "allwinner,sun8i-h3-mdio-internal";
 521                                         reg = <1>;
 522                                         #address-cells = <1>;
 523                                         #size-cells = <0>;
 524
 525                                         int_mii_phy: ethernet-phy@1 {
 526                                                 compatible = "ethernet-phy-ieee802.3-c22";
 527                                                 reg = <1>;
 528                                                 clocks = <&ccu CLK_BUS_EPHY>;
 529                                                 resets = <&ccu RST_BUS_EPHY>;
 530                                         };
 531                                 };
 532
 533                                 external_mdio: mdio@2 {
 534                                         reg = <2>;
 535                                         #address-cells = <1>;
 536                                         #size-cells = <0>;
 537                                 };
 538                         };
 539                 };
 540
 541                 spi0: spi@1c68000 {
 542                         compatible = "allwinner,sun8i-h3-spi";
 543                         reg = <0x01c68000 0x1000>;
 544                         interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 545                         clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
 546                         clock-names = "ahb", "mod";
 547                         dmas = <&dma 23>, <&dma 23>;
 548                         dma-names = "rx", "tx";
 549                         pinctrl-names = "default";
 550                         pinctrl-0 = <&spi0_pins>;
 551                         resets = <&ccu RST_BUS_SPI0>;
 552                         status = "disabled";
 553                         #address-cells = <1>;
 554                         #size-cells = <0>;
 555                 };
 556
 557                 spi1: spi@1c69000 {
 558                         compatible = "allwinner,sun8i-h3-spi";
 559                         reg = <0x01c69000 0x1000>;
 560                         interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 561                         clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
 562                         clock-names = "ahb", "mod";
 563                         dmas = <&dma 24>, <&dma 24>;
 564                         dma-names = "rx", "tx";
 565                         pinctrl-names = "default";
 566                         pinctrl-0 = <&spi1_pins>;
 567                         resets = <&ccu RST_BUS_SPI1>;
 568                         status = "disabled";
 569                         #address-cells = <1>;
 570                         #size-cells = <0>;
 571                 };
 572
 573                 wdt0: watchdog@1c20ca0 {
 574                         compatible = "allwinner,sun6i-a31-wdt";
 575                         reg = <0x01c20ca0 0x20>;
 576                         interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 577                         clocks = <&osc24M>;
 578                 };
 579
 580                 spdif: spdif@1c21000 {
 581                         #sound-dai-cells = <0>;
 582                         compatible = "allwinner,sun8i-h3-spdif";
 583                         reg = <0x01c21000 0x400>;
 584                         interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 585                         clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
 586                         resets = <&ccu RST_BUS_SPDIF>;
 587                         clock-names = "apb", "spdif";
 588                         dmas = <&dma 2>;
 589                         dma-names = "tx";
 590                         status = "disabled";
 591                 };
 592
 593                 pwm: pwm@1c21400 {
 594                         compatible = "allwinner,sun8i-h3-pwm";
 595                         reg = <0x01c21400 0x8>;
 596                         clocks = <&osc24M>;
 597                         #pwm-cells = <3>;
 598                         status = "disabled";
 599                 };
 600
 601                 i2s0: i2s@1c22000 {
 602                         #sound-dai-cells = <0>;
 603                         compatible = "allwinner,sun8i-h3-i2s";
 604                         reg = <0x01c22000 0x400>;
 605                         interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 606                         clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
 607                         clock-names = "apb", "mod";
 608                         dmas = <&dma 3>, <&dma 3>;
 609                         resets = <&ccu RST_BUS_I2S0>;
 610                         dma-names = "rx", "tx";
 611                         status = "disabled";
 612                 };
 613
 614                 i2s1: i2s@1c22400 {
 615                         #sound-dai-cells = <0>;
 616                         compatible = "allwinner,sun8i-h3-i2s";
 617                         reg = <0x01c22400 0x400>;
 618                         interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 619                         clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
 620                         clock-names = "apb", "mod";
 621                         dmas = <&dma 4>, <&dma 4>;
 622                         resets = <&ccu RST_BUS_I2S1>;
 623                         dma-names = "rx", "tx";
 624                         status = "disabled";
 625                 };
 626
 627                 codec: codec@1c22c00 {
 628                         #sound-dai-cells = <0>;
 629                         compatible = "allwinner,sun8i-h3-codec";
 630                         reg = <0x01c22c00 0x400>;
 631                         interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 632                         clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
 633                         clock-names = "apb", "codec";
 634                         resets = <&ccu RST_BUS_CODEC>;
 635                         dmas = <&dma 15>, <&dma 15>;
 636                         dma-names = "rx", "tx";
 637                         allwinner,codec-analog-controls = <&codec_analog>;
 638                         status = "disabled";
 639                 };
 640
 641                 uart0: serial@1c28000 {
 642                         compatible = "snps,dw-apb-uart";
 643                         reg = <0x01c28000 0x400>;
 644                         interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
 645                         reg-shift = <2>;
 646                         reg-io-width = <4>;
 647                         clocks = <&ccu CLK_BUS_UART0>;
 648                         resets = <&ccu RST_BUS_UART0>;
 649                         dmas = <&dma 6>, <&dma 6>;
 650                         dma-names = "rx", "tx";
 651                         status = "disabled";
 652                 };
 653
 654                 uart1: serial@1c28400 {
 655                         compatible = "snps,dw-apb-uart";
 656                         reg = <0x01c28400 0x400>;
 657                         interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 658                         reg-shift = <2>;
 659                         reg-io-width = <4>;
 660                         clocks = <&ccu CLK_BUS_UART1>;
 661                         resets = <&ccu RST_BUS_UART1>;
 662                         dmas = <&dma 7>, <&dma 7>;
 663                         dma-names = "rx", "tx";
 664                         status = "disabled";
 665                 };
 666
 667                 uart2: serial@1c28800 {
 668                         compatible = "snps,dw-apb-uart";
 669                         reg = <0x01c28800 0x400>;
 670                         interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 671                         reg-shift = <2>;
 672                         reg-io-width = <4>;
 673                         clocks = <&ccu CLK_BUS_UART2>;
 674                         resets = <&ccu RST_BUS_UART2>;
 675                         dmas = <&dma 8>, <&dma 8>;
 676                         dma-names = "rx", "tx";
 677                         status = "disabled";
 678                 };
 679
 680                 uart3: serial@1c28c00 {
 681                         compatible = "snps,dw-apb-uart";
 682                         reg = <0x01c28c00 0x400>;
 683                         interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 684                         reg-shift = <2>;
 685                         reg-io-width = <4>;
 686                         clocks = <&ccu CLK_BUS_UART3>;
 687                         resets = <&ccu RST_BUS_UART3>;
 688                         dmas = <&dma 9>, <&dma 9>;
 689                         dma-names = "rx", "tx";
 690                         status = "disabled";
 691                 };
 692
 693                 i2c0: i2c@1c2ac00 {
 694                         compatible = "allwinner,sun6i-a31-i2c";
 695                         reg = <0x01c2ac00 0x400>;
 696                         interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 697                         clocks = <&ccu CLK_BUS_I2C0>;
 698                         resets = <&ccu RST_BUS_I2C0>;
 699                         pinctrl-names = "default";
 700                         pinctrl-0 = <&i2c0_pins>;
 701                         status = "disabled";
 702                         #address-cells = <1>;
 703                         #size-cells = <0>;
 704                 };
 705
 706                 i2c1: i2c@1c2b000 {
 707                         compatible = "allwinner,sun6i-a31-i2c";
 708                         reg = <0x01c2b000 0x400>;
 709                         interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 710                         clocks = <&ccu CLK_BUS_I2C1>;
 711                         resets = <&ccu RST_BUS_I2C1>;
 712                         pinctrl-names = "default";
 713                         pinctrl-0 = <&i2c1_pins>;
 714                         status = "disabled";
 715                         #address-cells = <1>;
 716                         #size-cells = <0>;
 717                 };
 718
 719                 i2c2: i2c@1c2b400 {
 720                         compatible = "allwinner,sun6i-a31-i2c";
 721                         reg = <0x01c2b400 0x400>;
 722                         interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 723                         clocks = <&ccu CLK_BUS_I2C2>;
 724                         resets = <&ccu RST_BUS_I2C2>;
 725                         pinctrl-names = "default";
 726                         pinctrl-0 = <&i2c2_pins>;
 727                         status = "disabled";
 728                         #address-cells = <1>;
 729                         #size-cells = <0>;
 730                 };
 731
 732                 gic: interrupt-controller@1c81000 {
 733                         compatible = "arm,gic-400";
 734                         reg = <0x01c81000 0x1000>,
 735                               <0x01c82000 0x2000>,
 736                               <0x01c84000 0x2000>,
 737                               <0x01c86000 0x2000>;
 738                         interrupt-controller;
 739                         #interrupt-cells = <3>;
 740                         interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 741                 };
 742
 743                 csi: camera@1cb0000 {
 744                         compatible = "allwinner,sun8i-h3-csi";
 745                         reg = <0x01cb0000 0x1000>;
 746                         interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 747                         clocks = <&ccu CLK_BUS_CSI>,
 748                                  <&ccu CLK_CSI_SCLK>,
 749                                  <&ccu CLK_DRAM_CSI>;
 750                         clock-names = "bus", "mod", "ram";
 751                         resets = <&ccu RST_BUS_CSI>;
 752                         pinctrl-names = "default";
 753                         pinctrl-0 = <&csi_pins>;
 754                         status = "disabled";
 755                 };
 756
 757                 hdmi: hdmi@1ee0000 {
 758                         compatible = "allwinner,sun8i-h3-dw-hdmi",
 759                                      "allwinner,sun8i-a83t-dw-hdmi";
 760                         reg = <0x01ee0000 0x10000>;
 761                         reg-io-width = <1>;
 762                         interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 763                         clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
 764                                  <&ccu CLK_HDMI>;
 765                         clock-names = "iahb", "isfr", "tmds";
 766                         resets = <&ccu RST_BUS_HDMI1>;
 767                         reset-names = "ctrl";
 768                         phys = <&hdmi_phy>;
 769                         phy-names = "phy";
 770                         status = "disabled";
 771
 772                         ports {
 773                                 #address-cells = <1>;
 774                                 #size-cells = <0>;
 775
 776                                 hdmi_in: port@0 {
 777                                         reg = <0>;
 778
 779                                         hdmi_in_tcon0: endpoint {
 780                                                 remote-endpoint = <&tcon0_out_hdmi>;
 781                                         };
 782                                 };
 783
 784                                 hdmi_out: port@1 {
 785                                         reg = <1>;
 786                                 };
 787                         };
 788                 };
 789
 790                 hdmi_phy: hdmi-phy@1ef0000 {
 791                         compatible = "allwinner,sun8i-h3-hdmi-phy";
 792                         reg = <0x01ef0000 0x10000>;
 793                         clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
 794                                  <&ccu 6>;
 795                         clock-names = "bus", "mod", "pll-0";
 796                         resets = <&ccu RST_BUS_HDMI0>;
 797                         reset-names = "phy";
 798                         #phy-cells = <0>;
 799                 };
 800
 801                 rtc: rtc@1f00000 {
 802                         /* compatible is in per SoC .dtsi file */
 803                         reg = <0x01f00000 0x400>;
 804                         interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
 805                                      <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 806                         clock-output-names = "osc32k", "osc32k-out", "iosc";
 807                         clocks = <&osc32k>;
 808                         #clock-cells = <1>;
 809                 };
 810
 811                 r_ccu: clock@1f01400 {
 812                         compatible = "allwinner,sun8i-h3-r-ccu";
 813                         reg = <0x01f01400 0x100>;
 814                         clocks = <&osc24M>, <&rtc 0>, <&rtc 2>, <&ccu 9>;
 815                         clock-names = "hosc", "losc", "iosc", "pll-periph";
 816                         #clock-cells = <1>;
 817                         #reset-cells = <1>;
 818                 };
 819
 820                 codec_analog: codec-analog@1f015c0 {
 821                         compatible = "allwinner,sun8i-h3-codec-analog";
 822                         reg = <0x01f015c0 0x4>;
 823                 };
 824
 825                 ir: ir@1f02000 {
 826                         compatible = "allwinner,sun6i-a31-ir";
 827                         clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>;
 828                         clock-names = "apb", "ir";
 829                         resets = <&r_ccu RST_APB0_IR>;
 830                         interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 831                         reg = <0x01f02000 0x400>;
 832                         status = "disabled";
 833                 };
 834
 835                 r_i2c: i2c@1f02400 {
 836                         compatible = "allwinner,sun6i-a31-i2c";
 837                         reg = <0x01f02400 0x400>;
 838                         interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 839                         pinctrl-names = "default";
 840                         pinctrl-0 = <&r_i2c_pins>;
 841                         clocks = <&r_ccu CLK_APB0_I2C>;
 842                         resets = <&r_ccu RST_APB0_I2C>;
 843                         status = "disabled";
 844                         #address-cells = <1>;
 845                         #size-cells = <0>;
 846                 };
 847
 848                 r_pio: pinctrl@1f02c00 {
 849                         compatible = "allwinner,sun8i-h3-r-pinctrl";
 850                         reg = <0x01f02c00 0x400>;
 851                         interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 852                         clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&rtc 0>;
 853                         clock-names = "apb", "hosc", "losc";
 854                         gpio-controller;
 855                         #gpio-cells = <3>;
 856                         interrupt-controller;
 857                         #interrupt-cells = <3>;
 858
 859                         r_ir_rx_pin: r-ir-rx-pin {
 860                                 pins = "PL11";
 861                                 function = "s_cir_rx";
 862                         };
 863
 864                         r_i2c_pins: r-i2c-pins {
 865                                 pins = "PL0", "PL1";
 866                                 function = "s_i2c";
 867                         };
 868                 };
 869         };
 870 };