arch/arm/boot/dts/sunxi-h3-h5.dtsi

   1 /*
   2  * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
   3  *
   4  * This file is dual-licensed: you can use it either under the terms
   5  * of the GPL or the X11 license, at your option. Note that this dual
   6  * licensing only applies to this file, and not this project as a
   7  * whole.
   8  *
   9  *  a) This file is free software; you can redistribute it and/or
  10  *     modify it under the terms of the GNU General Public License as
  11  *     published by the Free Software Foundation; either version 2 of the
  12  *     License, or (at your option) any later version.
  13  *
  14  *     This file is distributed in the hope that it will be useful,
  15  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  *     GNU General Public License for more details.
  18  *
  19  * Or, alternatively,
  20  *
  21  *  b) Permission is hereby granted, free of charge, to any person
  22  *     obtaining a copy of this software and associated documentation
  23  *     files (the "Software"), to deal in the Software without
  24  *     restriction, including without limitation the rights to use,
  25  *     copy, modify, merge, publish, distribute, sublicense, and/or
  26  *     sell copies of the Software, and to permit persons to whom the
  27  *     Software is furnished to do so, subject to the following
  28  *     conditions:
  29  *
  30  *     The above copyright notice and this permission notice shall be
  31  *     included in all copies or substantial portions of the Software.
  32  *
  33  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  34  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  35  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  36  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  37  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  38  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  39  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  40  *     OTHER DEALINGS IN THE SOFTWARE.
  41  */
  42
  43 #include <dt-bindings/clock/sun8i-de2.h>
  44 #include <dt-bindings/clock/sun8i-h3-ccu.h>
  45 #include <dt-bindings/clock/sun8i-r-ccu.h>
  46 #include <dt-bindings/interrupt-controller/arm-gic.h>
  47 #include <dt-bindings/reset/sun8i-de2.h>
  48 #include <dt-bindings/reset/sun8i-h3-ccu.h>
  49 #include <dt-bindings/reset/sun8i-r-ccu.h>
  50
  51 / {
  52         interrupt-parent = <&gic>;
  53         #address-cells = <1>;
  54         #size-cells = <1>;
  55
  56         chosen {
  57                 #address-cells = <1>;
  58                 #size-cells = <1>;
  59                 ranges;
  60
  61                 framebuffer-hdmi {
  62                         compatible = "allwinner,simple-framebuffer",
  63                                      "simple-framebuffer";
  64                         allwinner,pipeline = "mixer0-lcd0-hdmi";
  65                         clocks = <&display_clocks CLK_MIXER0>,
  66                                  <&ccu CLK_TCON0>, <&ccu CLK_HDMI>;
  67                         status = "disabled";
  68                 };
  69
  70                 framebuffer-tve {
  71                         compatible = "allwinner,simple-framebuffer",
  72                                      "simple-framebuffer";
  73                         allwinner,pipeline = "mixer1-lcd1-tve";
  74                         clocks = <&display_clocks CLK_MIXER1>,
  75                                  <&ccu CLK_TVE>;
  76                         status = "disabled";
  77                 };
  78         };
  79
  80         clocks {
  81                 #address-cells = <1>;
  82                 #size-cells = <1>;
  83                 ranges;
  84
  85                 osc24M: osc24M_clk {
  86                         #clock-cells = <0>;
  87                         compatible = "fixed-clock";
  88                         clock-frequency = <24000000>;
  89                         clock-output-names = "osc24M";
  90                 };
  91
  92                 osc32k: osc32k_clk {
  93                         #clock-cells = <0>;
  94                         compatible = "fixed-clock";
  95                         clock-frequency = <32768>;
  96                         clock-output-names = "osc32k";
  97                 };
  98
  99                 iosc: internal-osc-clk {
 100                         #clock-cells = <0>;
 101                         compatible = "fixed-clock";
 102                         clock-frequency = <16000000>;
 103                         clock-accuracy = <300000000>;
 104                         clock-output-names = "iosc";
 105                 };
 106         };
 107
 108         de: display-engine {
 109                 compatible = "allwinner,sun8i-h3-display-engine";
 110                 allwinner,pipelines = <&mixer0>;
 111                 status = "disabled";
 112         };
 113
 114         soc {
 115                 compatible = "simple-bus";
 116                 #address-cells = <1>;
 117                 #size-cells = <1>;
 118                 ranges;
 119
 120                 display_clocks: clock@1000000 {
 121                         /* compatible is in per SoC .dtsi file */
 122                         reg = <0x01000000 0x100000>;
 123                         clocks = <&ccu CLK_DE>,
 124                                  <&ccu CLK_BUS_DE>;
 125                         clock-names = "mod",
 126                                       "bus";
 127                         resets = <&ccu RST_BUS_DE>;
 128                         #clock-cells = <1>;
 129                         #reset-cells = <1>;
 130                 };
 131
 132                 mixer0: mixer@1100000 {
 133                         compatible = "allwinner,sun8i-h3-de2-mixer-0";
 134                         reg = <0x01100000 0x100000>;
 135                         clocks = <&display_clocks CLK_BUS_MIXER0>,
 136                                  <&display_clocks CLK_MIXER0>;
 137                         clock-names = "bus",
 138                                       "mod";
 139                         resets = <&display_clocks RST_MIXER0>;
 140
 141                         ports {
 142                                 #address-cells = <1>;
 143                                 #size-cells = <0>;
 144
 145                                 mixer0_out: port@1 {
 146                                         reg = <1>;
 147
 148                                         mixer0_out_tcon0: endpoint {
 149                                                 remote-endpoint = <&tcon0_in_mixer0>;
 150                                         };
 151                                 };
 152                         };
 153                 };
 154
 155                 syscon: syscon@1c00000 {
 156                         compatible = "allwinner,sun8i-h3-system-controller",
 157                                 "syscon";
 158                         reg = <0x01c00000 0x1000>;
 159                 };
 160
 161                 dma: dma-controller@1c02000 {
 162                         compatible = "allwinner,sun8i-h3-dma";
 163                         reg = <0x01c02000 0x1000>;
 164                         interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 165                         clocks = <&ccu CLK_BUS_DMA>;
 166                         resets = <&ccu RST_BUS_DMA>;
 167                         #dma-cells = <1>;
 168                 };
 169
 170                 tcon0: lcd-controller@1c0c000 {
 171                         compatible = "allwinner,sun8i-h3-tcon-tv",
 172                                      "allwinner,sun8i-a83t-tcon-tv";
 173                         reg = <0x01c0c000 0x1000>;
 174                         interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 175                         clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
 176                         clock-names = "ahb", "tcon-ch1";
 177                         resets = <&ccu RST_BUS_TCON0>;
 178                         reset-names = "lcd";
 179
 180                         ports {
 181                                 #address-cells = <1>;
 182                                 #size-cells = <0>;
 183
 184                                 tcon0_in: port@0 {
 185                                         reg = <0>;
 186
 187                                         tcon0_in_mixer0: endpoint {
 188                                                 remote-endpoint = <&mixer0_out_tcon0>;
 189                                         };
 190                                 };
 191
 192                                 tcon0_out: port@1 {
 193                                         #address-cells = <1>;
 194                                         #size-cells = <0>;
 195                                         reg = <1>;
 196
 197                                         tcon0_out_hdmi: endpoint@1 {
 198                                                 reg = <1>;
 199                                                 remote-endpoint = <&hdmi_in_tcon0>;
 200                                         };
 201                                 };
 202                         };
 203                 };
 204
 205                 mmc0: mmc@1c0f000 {
 206                         /* compatible and clocks are in per SoC .dtsi file */
 207                         reg = <0x01c0f000 0x1000>;
 208                         pinctrl-names = "default";
 209                         pinctrl-0 = <&mmc0_pins>;
 210                         resets = <&ccu RST_BUS_MMC0>;
 211                         reset-names = "ahb";
 212                         interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 213                         status = "disabled";
 214                         #address-cells = <1>;
 215                         #size-cells = <0>;
 216                 };
 217
 218                 mmc1: mmc@1c10000 {
 219                         /* compatible and clocks are in per SoC .dtsi file */
 220                         reg = <0x01c10000 0x1000>;
 221                         pinctrl-names = "default";
 222                         pinctrl-0 = <&mmc1_pins>;
 223                         resets = <&ccu RST_BUS_MMC1>;
 224                         reset-names = "ahb";
 225                         interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 226                         status = "disabled";
 227                         #address-cells = <1>;
 228                         #size-cells = <0>;
 229                 };
 230
 231                 mmc2: mmc@1c11000 {
 232                         /* compatible and clocks are in per SoC .dtsi file */
 233                         reg = <0x01c11000 0x1000>;
 234                         resets = <&ccu RST_BUS_MMC2>;
 235                         reset-names = "ahb";
 236                         interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 237                         status = "disabled";
 238                         #address-cells = <1>;
 239                         #size-cells = <0>;
 240                 };
 241
 242                 usb_otg: usb@1c19000 {
 243                         compatible = "allwinner,sun8i-h3-musb";
 244                         reg = <0x01c19000 0x400>;
 245                         clocks = <&ccu CLK_BUS_OTG>;
 246                         resets = <&ccu RST_BUS_OTG>;
 247                         interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 248                         interrupt-names = "mc";
 249                         phys = <&usbphy 0>;
 250                         phy-names = "usb";
 251                         extcon = <&usbphy 0>;
 252                         status = "disabled";
 253                 };
 254
 255                 usbphy: phy@1c19400 {
 256                         compatible = "allwinner,sun8i-h3-usb-phy";
 257                         reg = <0x01c19400 0x2c>,
 258                               <0x01c1a800 0x4>,
 259                               <0x01c1b800 0x4>,
 260                               <0x01c1c800 0x4>,
 261                               <0x01c1d800 0x4>;
 262                         reg-names = "phy_ctrl",
 263                                     "pmu0",
 264                                     "pmu1",
 265                                     "pmu2",
 266                                     "pmu3";
 267                         clocks = <&ccu CLK_USB_PHY0>,
 268                                  <&ccu CLK_USB_PHY1>,
 269                                  <&ccu CLK_USB_PHY2>,
 270                                  <&ccu CLK_USB_PHY3>;
 271                         clock-names = "usb0_phy",
 272                                       "usb1_phy",
 273                                       "usb2_phy",
 274                                       "usb3_phy";
 275                         resets = <&ccu RST_USB_PHY0>,
 276                                  <&ccu RST_USB_PHY1>,
 277                                  <&ccu RST_USB_PHY2>,
 278                                  <&ccu RST_USB_PHY3>;
 279                         reset-names = "usb0_reset",
 280                                       "usb1_reset",
 281                                       "usb2_reset",
 282                                       "usb3_reset";
 283                         status = "disabled";
 284                         #phy-cells = <1>;
 285                 };
 286
 287                 ehci0: usb@1c1a000 {
 288                         compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
 289                         reg = <0x01c1a000 0x100>;
 290                         interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 291                         clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>;
 292                         resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
 293                         status = "disabled";
 294                 };
 295
 296                 ohci0: usb@1c1a400 {
 297                         compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
 298                         reg = <0x01c1a400 0x100>;
 299                         interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 300                         clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>,
 301                                  <&ccu CLK_USB_OHCI0>;
 302                         resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
 303                         status = "disabled";
 304                 };
 305
 306                 ehci1: usb@1c1b000 {
 307                         compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
 308                         reg = <0x01c1b000 0x100>;
 309                         interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 310                         clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>;
 311                         resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
 312                         phys = <&usbphy 1>;
 313                         phy-names = "usb";
 314                         status = "disabled";
 315                 };
 316
 317                 ohci1: usb@1c1b400 {
 318                         compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
 319                         reg = <0x01c1b400 0x100>;
 320                         interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 321                         clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>,
 322                                  <&ccu CLK_USB_OHCI1>;
 323                         resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
 324                         phys = <&usbphy 1>;
 325                         phy-names = "usb";
 326                         status = "disabled";
 327                 };
 328
 329                 ehci2: usb@1c1c000 {
 330                         compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
 331                         reg = <0x01c1c000 0x100>;
 332                         interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 333                         clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>;
 334                         resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
 335                         phys = <&usbphy 2>;
 336                         phy-names = "usb";
 337                         status = "disabled";
 338                 };
 339
 340                 ohci2: usb@1c1c400 {
 341                         compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
 342                         reg = <0x01c1c400 0x100>;
 343                         interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 344                         clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>,
 345                                  <&ccu CLK_USB_OHCI2>;
 346                         resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
 347                         phys = <&usbphy 2>;
 348                         phy-names = "usb";
 349                         status = "disabled";
 350                 };
 351
 352                 ehci3: usb@1c1d000 {
 353                         compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
 354                         reg = <0x01c1d000 0x100>;
 355                         interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 356                         clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>;
 357                         resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
 358                         phys = <&usbphy 3>;
 359                         phy-names = "usb";
 360                         status = "disabled";
 361                 };
 362
 363                 ohci3: usb@1c1d400 {
 364                         compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
 365                         reg = <0x01c1d400 0x100>;
 366                         interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
 367                         clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>,
 368                                  <&ccu CLK_USB_OHCI3>;
 369                         resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
 370                         phys = <&usbphy 3>;
 371                         phy-names = "usb";
 372                         status = "disabled";
 373                 };
 374
 375                 ccu: clock@1c20000 {
 376                         /* compatible is in per SoC .dtsi file */
 377                         reg = <0x01c20000 0x400>;
 378                         clocks = <&osc24M>, <&osc32k>;
 379                         clock-names = "hosc", "losc";
 380                         #clock-cells = <1>;
 381                         #reset-cells = <1>;
 382                 };
 383
 384                 pio: pinctrl@1c20800 {
 385                         /* compatible is in per SoC .dtsi file */
 386                         reg = <0x01c20800 0x400>;
 387                         interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
 388                                      <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 389                         clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
 390                         clock-names = "apb", "hosc", "losc";
 391                         gpio-controller;
 392                         #gpio-cells = <3>;
 393                         interrupt-controller;
 394                         #interrupt-cells = <3>;
 395
 396                         emac_rgmii_pins: emac0 {
 397                                 pins = "PD0", "PD1", "PD2", "PD3", "PD4",
 398                                        "PD5", "PD7", "PD8", "PD9", "PD10",
 399                                        "PD12", "PD13", "PD15", "PD16", "PD17";
 400                                 function = "emac";
 401                                 drive-strength = <40>;
 402                         };
 403
 404                         i2c0_pins: i2c0 {
 405                                 pins = "PA11", "PA12";
 406                                 function = "i2c0";
 407                         };
 408
 409                         i2c1_pins: i2c1 {
 410                                 pins = "PA18", "PA19";
 411                                 function = "i2c1";
 412                         };
 413
 414                         i2c2_pins: i2c2 {
 415                                 pins = "PE12", "PE13";
 416                                 function = "i2c2";
 417                         };
 418
 419                         mmc0_pins: mmc0 {
 420                                 pins = "PF0", "PF1", "PF2", "PF3",
 421                                        "PF4", "PF5";
 422                                 function = "mmc0";
 423                                 drive-strength = <30>;
 424                                 bias-pull-up;
 425                         };
 426
 427                         mmc1_pins: mmc1 {
 428                                 pins = "PG0", "PG1", "PG2", "PG3",
 429                                        "PG4", "PG5";
 430                                 function = "mmc1";
 431                                 drive-strength = <30>;
 432                                 bias-pull-up;
 433                         };
 434
 435                         mmc2_8bit_pins: mmc2_8bit {
 436                                 pins = "PC5", "PC6", "PC8",
 437                                        "PC9", "PC10", "PC11",
 438                                        "PC12", "PC13", "PC14",
 439                                        "PC15", "PC16";
 440                                 function = "mmc2";
 441                                 drive-strength = <30>;
 442                                 bias-pull-up;
 443                         };
 444
 445                         spdif_tx_pins_a: spdif {
 446                                 pins = "PA17";
 447                                 function = "spdif";
 448                         };
 449
 450                         spi0_pins: spi0 {
 451                                 pins = "PC0", "PC1", "PC2", "PC3";
 452                                 function = "spi0";
 453                         };
 454
 455                         spi1_pins: spi1 {
 456                                 pins = "PA15", "PA16", "PA14", "PA13";
 457                                 function = "spi1";
 458                         };
 459
 460                         uart0_pins_a: uart0 {
 461                                 pins = "PA4", "PA5";
 462                                 function = "uart0";
 463                         };
 464
 465                         uart1_pins: uart1 {
 466                                 pins = "PG6", "PG7";
 467                                 function = "uart1";
 468                         };
 469
 470                         uart1_rts_cts_pins: uart1_rts_cts {
 471                                 pins = "PG8", "PG9";
 472                                 function = "uart1";
 473                         };
 474
 475                         uart2_pins: uart2 {
 476                                 pins = "PA0", "PA1";
 477                                 function = "uart2";
 478                         };
 479
 480                         uart3_pins: uart3 {
 481                                 pins = "PA13", "PA14";
 482                                 function = "uart3";
 483                         };
 484
 485                         uart3_rts_cts_pins: uart3_rts_cts {
 486                                 pins = "PA15", "PA16";
 487                                 function = "uart3";
 488                         };
 489                 };
 490
 491                 timer@1c20c00 {
 492                         compatible = "allwinner,sun4i-a10-timer";
 493                         reg = <0x01c20c00 0xa0>;
 494                         interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
 495                                      <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 496                         clocks = <&osc24M>;
 497                 };
 498
 499                 emac: ethernet@1c30000 {
 500                         compatible = "allwinner,sun8i-h3-emac";
 501                         syscon = <&syscon>;
 502                         reg = <0x01c30000 0x10000>;
 503                         interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 504                         interrupt-names = "macirq";
 505                         resets = <&ccu RST_BUS_EMAC>;
 506                         reset-names = "stmmaceth";
 507                         clocks = <&ccu CLK_BUS_EMAC>;
 508                         clock-names = "stmmaceth";
 509                         #address-cells = <1>;
 510                         #size-cells = <0>;
 511                         status = "disabled";
 512
 513                         mdio: mdio {
 514                                 #address-cells = <1>;
 515                                 #size-cells = <0>;
 516                                 compatible = "snps,dwmac-mdio";
 517                         };
 518
 519                         mdio-mux {
 520                                 compatible = "allwinner,sun8i-h3-mdio-mux";
 521                                 #address-cells = <1>;
 522                                 #size-cells = <0>;
 523
 524                                 mdio-parent-bus = <&mdio>;
 525                                 /* Only one MDIO is usable at the time */
 526                                 internal_mdio: mdio@1 {
 527                                         compatible = "allwinner,sun8i-h3-mdio-internal";
 528                                         reg = <1>;
 529                                         #address-cells = <1>;
 530                                         #size-cells = <0>;
 531
 532                                         int_mii_phy: ethernet-phy@1 {
 533                                                 compatible = "ethernet-phy-ieee802.3-c22";
 534                                                 reg = <1>;
 535                                                 clocks = <&ccu CLK_BUS_EPHY>;
 536                                                 resets = <&ccu RST_BUS_EPHY>;
 537                                         };
 538                                 };
 539
 540                                 external_mdio: mdio@2 {
 541                                         reg = <2>;
 542                                         #address-cells = <1>;
 543                                         #size-cells = <0>;
 544                                 };
 545                         };
 546                 };
 547
 548                 spi0: spi@1c68000 {
 549                         compatible = "allwinner,sun8i-h3-spi";
 550                         reg = <0x01c68000 0x1000>;
 551                         interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 552                         clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
 553                         clock-names = "ahb", "mod";
 554                         dmas = <&dma 23>, <&dma 23>;
 555                         dma-names = "rx", "tx";
 556                         pinctrl-names = "default";
 557                         pinctrl-0 = <&spi0_pins>;
 558                         resets = <&ccu RST_BUS_SPI0>;
 559                         status = "disabled";
 560                         #address-cells = <1>;
 561                         #size-cells = <0>;
 562                 };
 563
 564                 spi1: spi@1c69000 {
 565                         compatible = "allwinner,sun8i-h3-spi";
 566                         reg = <0x01c69000 0x1000>;
 567                         interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 568                         clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
 569                         clock-names = "ahb", "mod";
 570                         dmas = <&dma 24>, <&dma 24>;
 571                         dma-names = "rx", "tx";
 572                         pinctrl-names = "default";
 573                         pinctrl-0 = <&spi1_pins>;
 574                         resets = <&ccu RST_BUS_SPI1>;
 575                         status = "disabled";
 576                         #address-cells = <1>;
 577                         #size-cells = <0>;
 578                 };
 579
 580                 wdt0: watchdog@1c20ca0 {
 581                         compatible = "allwinner,sun6i-a31-wdt";
 582                         reg = <0x01c20ca0 0x20>;
 583                         interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 584                 };
 585
 586                 spdif: spdif@1c21000 {
 587                         #sound-dai-cells = <0>;
 588                         compatible = "allwinner,sun8i-h3-spdif";
 589                         reg = <0x01c21000 0x400>;
 590                         interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 591                         clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
 592                         resets = <&ccu RST_BUS_SPDIF>;
 593                         clock-names = "apb", "spdif";
 594                         dmas = <&dma 2>;
 595                         dma-names = "tx";
 596                         status = "disabled";
 597                 };
 598
 599                 pwm: pwm@1c21400 {
 600                         compatible = "allwinner,sun8i-h3-pwm";
 601                         reg = <0x01c21400 0x8>;
 602                         clocks = <&osc24M>;
 603                         #pwm-cells = <3>;
 604                         status = "disabled";
 605                 };
 606
 607                 i2s0: i2s@1c22000 {
 608                         #sound-dai-cells = <0>;
 609                         compatible = "allwinner,sun8i-h3-i2s";
 610                         reg = <0x01c22000 0x400>;
 611                         interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 612                         clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
 613                         clock-names = "apb", "mod";
 614                         dmas = <&dma 3>, <&dma 3>;
 615                         resets = <&ccu RST_BUS_I2S0>;
 616                         dma-names = "rx", "tx";
 617                         status = "disabled";
 618                 };
 619
 620                 i2s1: i2s@1c22400 {
 621                         #sound-dai-cells = <0>;
 622                         compatible = "allwinner,sun8i-h3-i2s";
 623                         reg = <0x01c22400 0x400>;
 624                         interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 625                         clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
 626                         clock-names = "apb", "mod";
 627                         dmas = <&dma 4>, <&dma 4>;
 628                         resets = <&ccu RST_BUS_I2S1>;
 629                         dma-names = "rx", "tx";
 630                         status = "disabled";
 631                 };
 632
 633                 codec: codec@1c22c00 {
 634                         #sound-dai-cells = <0>;
 635                         compatible = "allwinner,sun8i-h3-codec";
 636                         reg = <0x01c22c00 0x400>;
 637                         interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 638                         clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
 639                         clock-names = "apb", "codec";
 640                         resets = <&ccu RST_BUS_CODEC>;
 641                         dmas = <&dma 15>, <&dma 15>;
 642                         dma-names = "rx", "tx";
 643                         allwinner,codec-analog-controls = <&codec_analog>;
 644                         status = "disabled";
 645                 };
 646
 647                 uart0: serial@1c28000 {
 648                         compatible = "snps,dw-apb-uart";
 649                         reg = <0x01c28000 0x400>;
 650                         interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
 651                         reg-shift = <2>;
 652                         reg-io-width = <4>;
 653                         clocks = <&ccu CLK_BUS_UART0>;
 654                         resets = <&ccu RST_BUS_UART0>;
 655                         dmas = <&dma 6>, <&dma 6>;
 656                         dma-names = "rx", "tx";
 657                         status = "disabled";
 658                 };
 659
 660                 uart1: serial@1c28400 {
 661                         compatible = "snps,dw-apb-uart";
 662                         reg = <0x01c28400 0x400>;
 663                         interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 664                         reg-shift = <2>;
 665                         reg-io-width = <4>;
 666                         clocks = <&ccu CLK_BUS_UART1>;
 667                         resets = <&ccu RST_BUS_UART1>;
 668                         dmas = <&dma 7>, <&dma 7>;
 669                         dma-names = "rx", "tx";
 670                         status = "disabled";
 671                 };
 672
 673                 uart2: serial@1c28800 {
 674                         compatible = "snps,dw-apb-uart";
 675                         reg = <0x01c28800 0x400>;
 676                         interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 677                         reg-shift = <2>;
 678                         reg-io-width = <4>;
 679                         clocks = <&ccu CLK_BUS_UART2>;
 680                         resets = <&ccu RST_BUS_UART2>;
 681                         dmas = <&dma 8>, <&dma 8>;
 682                         dma-names = "rx", "tx";
 683                         status = "disabled";
 684                 };
 685
 686                 uart3: serial@1c28c00 {
 687                         compatible = "snps,dw-apb-uart";
 688                         reg = <0x01c28c00 0x400>;
 689                         interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 690                         reg-shift = <2>;
 691                         reg-io-width = <4>;
 692                         clocks = <&ccu CLK_BUS_UART3>;
 693                         resets = <&ccu RST_BUS_UART3>;
 694                         dmas = <&dma 9>, <&dma 9>;
 695                         dma-names = "rx", "tx";
 696                         status = "disabled";
 697                 };
 698
 699                 i2c0: i2c@1c2ac00 {
 700                         compatible = "allwinner,sun6i-a31-i2c";
 701                         reg = <0x01c2ac00 0x400>;
 702                         interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 703                         clocks = <&ccu CLK_BUS_I2C0>;
 704                         resets = <&ccu RST_BUS_I2C0>;
 705                         pinctrl-names = "default";
 706                         pinctrl-0 = <&i2c0_pins>;
 707                         status = "disabled";
 708                         #address-cells = <1>;
 709                         #size-cells = <0>;
 710                 };
 711
 712                 i2c1: i2c@1c2b000 {
 713                         compatible = "allwinner,sun6i-a31-i2c";
 714                         reg = <0x01c2b000 0x400>;
 715                         interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 716                         clocks = <&ccu CLK_BUS_I2C1>;
 717                         resets = <&ccu RST_BUS_I2C1>;
 718                         pinctrl-names = "default";
 719                         pinctrl-0 = <&i2c1_pins>;
 720                         status = "disabled";
 721                         #address-cells = <1>;
 722                         #size-cells = <0>;
 723                 };
 724
 725                 i2c2: i2c@1c2b400 {
 726                         compatible = "allwinner,sun6i-a31-i2c";
 727                         reg = <0x01c2b400 0x400>;
 728                         interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 729                         clocks = <&ccu CLK_BUS_I2C2>;
 730                         resets = <&ccu RST_BUS_I2C2>;
 731                         pinctrl-names = "default";
 732                         pinctrl-0 = <&i2c2_pins>;
 733                         status = "disabled";
 734                         #address-cells = <1>;
 735                         #size-cells = <0>;
 736                 };
 737
 738                 gic: interrupt-controller@1c81000 {
 739                         compatible = "arm,gic-400";
 740                         reg = <0x01c81000 0x1000>,
 741                               <0x01c82000 0x2000>,
 742                               <0x01c84000 0x2000>,
 743                               <0x01c86000 0x2000>;
 744                         interrupt-controller;
 745                         #interrupt-cells = <3>;
 746                         interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 747                 };
 748
 749                 hdmi: hdmi@1ee0000 {
 750                         compatible = "allwinner,sun8i-h3-dw-hdmi",
 751                                      "allwinner,sun8i-a83t-dw-hdmi";
 752                         reg = <0x01ee0000 0x10000>;
 753                         reg-io-width = <1>;
 754                         interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 755                         clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
 756                                  <&ccu CLK_HDMI>;
 757                         clock-names = "iahb", "isfr", "tmds";
 758                         resets = <&ccu RST_BUS_HDMI1>;
 759                         reset-names = "ctrl";
 760                         phys = <&hdmi_phy>;
 761                         phy-names = "hdmi-phy";
 762                         status = "disabled";
 763
 764                         ports {
 765                                 #address-cells = <1>;
 766                                 #size-cells = <0>;
 767
 768                                 hdmi_in: port@0 {
 769                                         reg = <0>;
 770
 771                                         hdmi_in_tcon0: endpoint {
 772                                                 remote-endpoint = <&tcon0_out_hdmi>;
 773                                         };
 774                                 };
 775
 776                                 hdmi_out: port@1 {
 777                                         reg = <1>;
 778                                 };
 779                         };
 780                 };
 781
 782                 hdmi_phy: hdmi-phy@1ef0000 {
 783                         compatible = "allwinner,sun8i-h3-hdmi-phy";
 784                         reg = <0x01ef0000 0x10000>;
 785                         clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
 786                                  <&ccu 6>;
 787                         clock-names = "bus", "mod", "pll-0";
 788                         resets = <&ccu RST_BUS_HDMI0>;
 789                         reset-names = "phy";
 790                         #phy-cells = <0>;
 791                 };
 792
 793                 rtc: rtc@1f00000 {
 794                         compatible = "allwinner,sun6i-a31-rtc";
 795                         reg = <0x01f00000 0x54>;
 796                         interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
 797                                      <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 798                 };
 799
 800                 r_ccu: clock@1f01400 {
 801                         compatible = "allwinner,sun8i-h3-r-ccu";
 802                         reg = <0x01f01400 0x100>;
 803                         clocks = <&osc24M>, <&osc32k>, <&iosc>,
 804                                  <&ccu 9>;
 805                         clock-names = "hosc", "losc", "iosc", "pll-periph";
 806                         #clock-cells = <1>;
 807                         #reset-cells = <1>;
 808                 };
 809
 810                 codec_analog: codec-analog@1f015c0 {
 811                         compatible = "allwinner,sun8i-h3-codec-analog";
 812                         reg = <0x01f015c0 0x4>;
 813                 };
 814
 815                 ir: ir@1f02000 {
 816                         compatible = "allwinner,sun5i-a13-ir";
 817                         clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>;
 818                         clock-names = "apb", "ir";
 819                         resets = <&r_ccu RST_APB0_IR>;
 820                         interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 821                         reg = <0x01f02000 0x40>;
 822                         status = "disabled";
 823                 };
 824
 825                 r_pio: pinctrl@1f02c00 {
 826                         compatible = "allwinner,sun8i-h3-r-pinctrl";
 827                         reg = <0x01f02c00 0x400>;
 828                         interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 829                         clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
 830                         clock-names = "apb", "hosc", "losc";
 831                         gpio-controller;
 832                         #gpio-cells = <3>;
 833                         interrupt-controller;
 834                         #interrupt-cells = <3>;
 835
 836                         ir_pins_a: ir {
 837                                 pins = "PL11";
 838                                 function = "s_cir_rx";
 839                         };
 840                 };
 841         };
 842 };