arch/arm/boot/dts/sun8i-r40.dtsi

   1 /*
   2  * Copyright 2017 Chen-Yu Tsai <wens@csie.org>
   3  * Copyright 2017 Icenowy Zheng <icenowy@aosc.io>
   4  *
   5  * This file is dual-licensed: you can use it either under the terms
   6  * of the GPL or the X11 license, at your option. Note that this dual
   7  * licensing only applies to this file, and not this project as a
   8  * whole.
   9  *
  10  *  a) This file is free software; you can redistribute it and/or
  11  *     modify it under the terms of the GNU General Public License as
  12  *     published by the Free Software Foundation; either version 2 of the
  13  *     License, or (at your option) any later version.
  14  *
  15  *     This file is distributed in the hope that it will be useful,
  16  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18  *     GNU General Public License for more details.
  19  *
  20  * Or, alternatively,
  21  *
  22  *  b) Permission is hereby granted, free of charge, to any person
  23  *     obtaining a copy of this software and associated documentation
  24  *     files (the "Software"), to deal in the Software without
  25  *     restriction, including without limitation the rights to use,
  26  *     copy, modify, merge, publish, distribute, sublicense, and/or
  27  *     sell copies of the Software, and to permit persons to whom the
  28  *     Software is furnished to do so, subject to the following
  29  *     conditions:
  30  *
  31  *     The above copyright notice and this permission notice shall be
  32  *     included in all copies or substantial portions of the Software.
  33  *
  34  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  35  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  36  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  37  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  38  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  39  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  40  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  41  *     OTHER DEALINGS IN THE SOFTWARE.
  42  */
  43
  44 #include <dt-bindings/interrupt-controller/arm-gic.h>
  45 #include <dt-bindings/clock/sun8i-de2.h>
  46 #include <dt-bindings/clock/sun8i-r40-ccu.h>
  47 #include <dt-bindings/reset/sun8i-r40-ccu.h>
  48 #include <dt-bindings/reset/sun8i-de2.h>
  49
  50 / {
  51         #address-cells = <1>;
  52         #size-cells = <1>;
  53         interrupt-parent = <&gic>;
  54
  55         clocks {
  56                 #address-cells = <1>;
  57                 #size-cells = <1>;
  58                 ranges;
  59
  60                 osc24M: osc24M {
  61                         #clock-cells = <0>;
  62                         compatible = "fixed-clock";
  63                         clock-frequency = <24000000>;
  64                         clock-output-names = "osc24M";
  65                 };
  66
  67                 osc32k: osc32k {
  68                         #clock-cells = <0>;
  69                         compatible = "fixed-clock";
  70                         clock-frequency = <32768>;
  71                         clock-output-names = "osc32k";
  72                 };
  73         };
  74
  75         cpus {
  76                 #address-cells = <1>;
  77                 #size-cells = <0>;
  78
  79                 cpu@0 {
  80                         compatible = "arm,cortex-a7";
  81                         device_type = "cpu";
  82                         reg = <0>;
  83                 };
  84
  85                 cpu@1 {
  86                         compatible = "arm,cortex-a7";
  87                         device_type = "cpu";
  88                         reg = <1>;
  89                 };
  90
  91                 cpu@2 {
  92                         compatible = "arm,cortex-a7";
  93                         device_type = "cpu";
  94                         reg = <2>;
  95                 };
  96
  97                 cpu@3 {
  98                         compatible = "arm,cortex-a7";
  99                         device_type = "cpu";
 100                         reg = <3>;
 101                 };
 102         };
 103
 104         de: display-engine {
 105                 compatible = "allwinner,sun8i-r40-display-engine";
 106                 allwinner,pipelines = <&mixer0>, <&mixer1>;
 107                 status = "disabled";
 108         };
 109
 110         soc {
 111                 compatible = "simple-bus";
 112                 #address-cells = <1>;
 113                 #size-cells = <1>;
 114                 ranges;
 115
 116                 display_clocks: clock@1000000 {
 117                         compatible = "allwinner,sun8i-r40-de2-clk",
 118                                      "allwinner,sun8i-h3-de2-clk";
 119                         reg = <0x01000000 0x100000>;
 120                         clocks = <&ccu CLK_DE>,
 121                                  <&ccu CLK_BUS_DE>;
 122                         clock-names = "mod",
 123                                       "bus";
 124                         resets = <&ccu RST_BUS_DE>;
 125                         #clock-cells = <1>;
 126                         #reset-cells = <1>;
 127                 };
 128
 129                 mixer0: mixer@1100000 {
 130                         compatible = "allwinner,sun8i-r40-de2-mixer-0";
 131                         reg = <0x01100000 0x100000>;
 132                         clocks = <&display_clocks CLK_BUS_MIXER0>,
 133                                  <&display_clocks CLK_MIXER0>;
 134                         clock-names = "bus",
 135                                       "mod";
 136                         resets = <&display_clocks RST_MIXER0>;
 137
 138                         ports {
 139                                 #address-cells = <1>;
 140                                 #size-cells = <0>;
 141
 142                                 mixer0_out: port@1 {
 143                                         reg = <1>;
 144                                         mixer0_out_tcon_top: endpoint {
 145                                                 remote-endpoint = <&tcon_top_mixer0_in_mixer0>;
 146                                         };
 147                                 };
 148                         };
 149                 };
 150
 151                 mixer1: mixer@1200000 {
 152                         compatible = "allwinner,sun8i-r40-de2-mixer-1";
 153                         reg = <0x01200000 0x100000>;
 154                         clocks = <&display_clocks CLK_BUS_MIXER1>,
 155                                  <&display_clocks CLK_MIXER1>;
 156                         clock-names = "bus",
 157                                       "mod";
 158                         resets = <&display_clocks RST_WB>;
 159
 160                         ports {
 161                                 #address-cells = <1>;
 162                                 #size-cells = <0>;
 163
 164                                 mixer1_out: port@1 {
 165                                         reg = <1>;
 166                                         mixer1_out_tcon_top: endpoint {
 167                                                 remote-endpoint = <&tcon_top_mixer1_in_mixer1>;
 168                                         };
 169                                 };
 170                         };
 171                 };
 172
 173                 nmi_intc: interrupt-controller@1c00030 {
 174                         compatible = "allwinner,sun7i-a20-sc-nmi";
 175                         interrupt-controller;
 176                         #interrupt-cells = <2>;
 177                         reg = <0x01c00030 0x0c>;
 178                         interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
 179                 };
 180
 181                 mmc0: mmc@1c0f000 {
 182                         compatible = "allwinner,sun8i-r40-mmc",
 183                                      "allwinner,sun50i-a64-mmc";
 184                         reg = <0x01c0f000 0x1000>;
 185                         clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
 186                         clock-names = "ahb", "mmc";
 187                         resets = <&ccu RST_BUS_MMC0>;
 188                         reset-names = "ahb";
 189                         pinctrl-0 = <&mmc0_pins>;
 190                         pinctrl-names = "default";
 191                         interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 192                         status = "disabled";
 193                         #address-cells = <1>;
 194                         #size-cells = <0>;
 195                 };
 196
 197                 mmc1: mmc@1c10000 {
 198                         compatible = "allwinner,sun8i-r40-mmc",
 199                                      "allwinner,sun50i-a64-mmc";
 200                         reg = <0x01c10000 0x1000>;
 201                         clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
 202                         clock-names = "ahb", "mmc";
 203                         resets = <&ccu RST_BUS_MMC1>;
 204                         reset-names = "ahb";
 205                         interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 206                         status = "disabled";
 207                         #address-cells = <1>;
 208                         #size-cells = <0>;
 209                 };
 210
 211                 mmc2: mmc@1c11000 {
 212                         compatible = "allwinner,sun8i-r40-emmc",
 213                                      "allwinner,sun50i-a64-emmc";
 214                         reg = <0x01c11000 0x1000>;
 215                         clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
 216                         clock-names = "ahb", "mmc";
 217                         resets = <&ccu RST_BUS_MMC2>;
 218                         reset-names = "ahb";
 219                         pinctrl-0 = <&mmc2_pins>;
 220                         pinctrl-names = "default";
 221                         interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 222                         status = "disabled";
 223                         #address-cells = <1>;
 224                         #size-cells = <0>;
 225                 };
 226
 227                 mmc3: mmc@1c12000 {
 228                         compatible = "allwinner,sun8i-r40-mmc",
 229                                      "allwinner,sun50i-a64-mmc";
 230                         reg = <0x01c12000 0x1000>;
 231                         clocks = <&ccu CLK_BUS_MMC3>, <&ccu CLK_MMC3>;
 232                         clock-names = "ahb", "mmc";
 233                         resets = <&ccu RST_BUS_MMC3>;
 234                         reset-names = "ahb";
 235                         interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 236                         status = "disabled";
 237                         #address-cells = <1>;
 238                         #size-cells = <0>;
 239                 };
 240
 241                 usbphy: phy@1c13400 {
 242                         compatible = "allwinner,sun8i-r40-usb-phy";
 243                         reg = <0x01c13400 0x14>,
 244                               <0x01c14800 0x4>,
 245                               <0x01c19800 0x4>,
 246                               <0x01c1c800 0x4>;
 247                         reg-names = "phy_ctrl",
 248                                     "pmu0",
 249                                     "pmu1",
 250                                     "pmu2";
 251                         clocks = <&ccu CLK_USB_PHY0>,
 252                                  <&ccu CLK_USB_PHY1>,
 253                                  <&ccu CLK_USB_PHY2>;
 254                         clock-names = "usb0_phy",
 255                                       "usb1_phy",
 256                                       "usb2_phy";
 257                         resets = <&ccu RST_USB_PHY0>,
 258                                  <&ccu RST_USB_PHY1>,
 259                                  <&ccu RST_USB_PHY2>;
 260                         reset-names = "usb0_reset",
 261                                       "usb1_reset",
 262                                       "usb2_reset";
 263                         status = "disabled";
 264                         #phy-cells = <1>;
 265                 };
 266
 267                 ehci1: usb@1c19000 {
 268                         compatible = "allwinner,sun8i-r40-ehci", "generic-ehci";
 269                         reg = <0x01c19000 0x100>;
 270                         interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 271                         clocks = <&ccu CLK_BUS_EHCI1>;
 272                         resets = <&ccu RST_BUS_EHCI1>;
 273                         phys = <&usbphy 1>;
 274                         phy-names = "usb";
 275                         status = "disabled";
 276                 };
 277
 278                 ohci1: usb@1c19400 {
 279                         compatible = "allwinner,sun8i-r40-ohci", "generic-ohci";
 280                         reg = <0x01c19400 0x100>;
 281                         interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 282                         clocks = <&ccu CLK_BUS_OHCI1>,
 283                                  <&ccu CLK_USB_OHCI1>;
 284                         resets = <&ccu RST_BUS_OHCI1>;
 285                         phys = <&usbphy 1>;
 286                         phy-names = "usb";
 287                         status = "disabled";
 288                 };
 289
 290                 ehci2: usb@1c1c000 {
 291                         compatible = "allwinner,sun8i-r40-ehci", "generic-ehci";
 292                         reg = <0x01c1c000 0x100>;
 293                         interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 294                         clocks = <&ccu CLK_BUS_EHCI2>;
 295                         resets = <&ccu RST_BUS_EHCI2>;
 296                         phys = <&usbphy 2>;
 297                         phy-names = "usb";
 298                         status = "disabled";
 299                 };
 300
 301                 ohci2: usb@1c1c400 {
 302                         compatible = "allwinner,sun8i-r40-ohci", "generic-ohci";
 303                         reg = <0x01c1c400 0x100>;
 304                         interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 305                         clocks = <&ccu CLK_BUS_OHCI2>,
 306                                  <&ccu CLK_USB_OHCI2>;
 307                         resets = <&ccu RST_BUS_OHCI2>;
 308                         phys = <&usbphy 2>;
 309                         phy-names = "usb";
 310                         status = "disabled";
 311                 };
 312
 313                 ccu: clock@1c20000 {
 314                         compatible = "allwinner,sun8i-r40-ccu";
 315                         reg = <0x01c20000 0x400>;
 316                         clocks = <&osc24M>, <&osc32k>;
 317                         clock-names = "hosc", "losc";
 318                         #clock-cells = <1>;
 319                         #reset-cells = <1>;
 320                 };
 321
 322                 pio: pinctrl@1c20800 {
 323                         compatible = "allwinner,sun8i-r40-pinctrl";
 324                         reg = <0x01c20800 0x400>;
 325                         interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 326                         clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
 327                         clock-names = "apb", "hosc", "losc";
 328                         gpio-controller;
 329                         interrupt-controller;
 330                         #interrupt-cells = <3>;
 331                         #gpio-cells = <3>;
 332
 333                         gmac_rgmii_pins: gmac-rgmii-pins {
 334                                 pins = "PA0", "PA1", "PA2", "PA3",
 335                                        "PA4", "PA5", "PA6", "PA7",
 336                                        "PA8", "PA10", "PA11", "PA12",
 337                                        "PA13", "PA15", "PA16";
 338                                 function = "gmac";
 339                                 /*
 340                                  * data lines in RGMII mode use DDR mode
 341                                  * and need a higher signal drive strength
 342                                  */
 343                                 drive-strength = <40>;
 344                         };
 345
 346                         i2c0_pins: i2c0-pins {
 347                                 pins = "PB0", "PB1";
 348                                 function = "i2c0";
 349                         };
 350
 351                         mmc0_pins: mmc0-pins {
 352                                 pins = "PF0", "PF1", "PF2",
 353                                        "PF3", "PF4", "PF5";
 354                                 function = "mmc0";
 355                                 drive-strength = <30>;
 356                                 bias-pull-up;
 357                         };
 358
 359                         mmc1_pg_pins: mmc1-pg-pins {
 360                                 pins = "PG0", "PG1", "PG2",
 361                                        "PG3", "PG4", "PG5";
 362                                 function = "mmc1";
 363                                 drive-strength = <30>;
 364                                 bias-pull-up;
 365                         };
 366
 367                         mmc2_pins: mmc2-pins {
 368                                 pins = "PC5", "PC6", "PC7", "PC8", "PC9",
 369                                        "PC10", "PC11", "PC12", "PC13", "PC14",
 370                                        "PC15", "PC24";
 371                                 function = "mmc2";
 372                                 drive-strength = <30>;
 373                                 bias-pull-up;
 374                         };
 375
 376                         uart0_pb_pins: uart0-pb-pins {
 377                                 pins = "PB22", "PB23";
 378                                 function = "uart0";
 379                         };
 380                 };
 381
 382                 wdt: watchdog@1c20c90 {
 383                         compatible = "allwinner,sun4i-a10-wdt";
 384                         reg = <0x01c20c90 0x10>;
 385                 };
 386
 387                 uart0: serial@1c28000 {
 388                         compatible = "snps,dw-apb-uart";
 389                         reg = <0x01c28000 0x400>;
 390                         interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 391                         reg-shift = <2>;
 392                         reg-io-width = <4>;
 393                         clocks = <&ccu CLK_BUS_UART0>;
 394                         resets = <&ccu RST_BUS_UART0>;
 395                         status = "disabled";
 396                 };
 397
 398                 uart1: serial@1c28400 {
 399                         compatible = "snps,dw-apb-uart";
 400                         reg = <0x01c28400 0x400>;
 401                         interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 402                         reg-shift = <2>;
 403                         reg-io-width = <4>;
 404                         clocks = <&ccu CLK_BUS_UART1>;
 405                         resets = <&ccu RST_BUS_UART1>;
 406                         status = "disabled";
 407                 };
 408
 409                 uart2: serial@1c28800 {
 410                         compatible = "snps,dw-apb-uart";
 411                         reg = <0x01c28800 0x400>;
 412                         interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 413                         reg-shift = <2>;
 414                         reg-io-width = <4>;
 415                         clocks = <&ccu CLK_BUS_UART2>;
 416                         resets = <&ccu RST_BUS_UART2>;
 417                         status = "disabled";
 418                 };
 419
 420                 uart3: serial@1c28c00 {
 421                         compatible = "snps,dw-apb-uart";
 422                         reg = <0x01c28c00 0x400>;
 423                         interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 424                         reg-shift = <2>;
 425                         reg-io-width = <4>;
 426                         clocks = <&ccu CLK_BUS_UART3>;
 427                         resets = <&ccu RST_BUS_UART3>;
 428                         status = "disabled";
 429                 };
 430
 431                 uart4: serial@1c29000 {
 432                         compatible = "snps,dw-apb-uart";
 433                         reg = <0x01c29000 0x400>;
 434                         interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 435                         reg-shift = <2>;
 436                         reg-io-width = <4>;
 437                         clocks = <&ccu CLK_BUS_UART4>;
 438                         resets = <&ccu RST_BUS_UART4>;
 439                         status = "disabled";
 440                 };
 441
 442                 uart5: serial@1c29400 {
 443                         compatible = "snps,dw-apb-uart";
 444                         reg = <0x01c29400 0x400>;
 445                         interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
 446                         reg-shift = <2>;
 447                         reg-io-width = <4>;
 448                         clocks = <&ccu CLK_BUS_UART5>;
 449                         resets = <&ccu RST_BUS_UART5>;
 450                         status = "disabled";
 451                 };
 452
 453                 uart6: serial@1c29800 {
 454                         compatible = "snps,dw-apb-uart";
 455                         reg = <0x01c29800 0x400>;
 456                         interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 457                         reg-shift = <2>;
 458                         reg-io-width = <4>;
 459                         clocks = <&ccu CLK_BUS_UART6>;
 460                         resets = <&ccu RST_BUS_UART6>;
 461                         status = "disabled";
 462                 };
 463
 464                 uart7: serial@1c29c00 {
 465                         compatible = "snps,dw-apb-uart";
 466                         reg = <0x01c29c00 0x400>;
 467                         interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 468                         reg-shift = <2>;
 469                         reg-io-width = <4>;
 470                         clocks = <&ccu CLK_BUS_UART7>;
 471                         resets = <&ccu RST_BUS_UART7>;
 472                         status = "disabled";
 473                 };
 474
 475                 i2c0: i2c@1c2ac00 {
 476                         compatible = "allwinner,sun6i-a31-i2c";
 477                         reg = <0x01c2ac00 0x400>;
 478                         interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 479                         clocks = <&ccu CLK_BUS_I2C0>;
 480                         resets = <&ccu RST_BUS_I2C0>;
 481                         pinctrl-0 = <&i2c0_pins>;
 482                         pinctrl-names = "default";
 483                         status = "disabled";
 484                         #address-cells = <1>;
 485                         #size-cells = <0>;
 486                 };
 487
 488                 i2c1: i2c@1c2b000 {
 489                         compatible = "allwinner,sun6i-a31-i2c";
 490                         reg = <0x01c2b000 0x400>;
 491                         interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 492                         clocks = <&ccu CLK_BUS_I2C1>;
 493                         resets = <&ccu RST_BUS_I2C1>;
 494                         status = "disabled";
 495                         #address-cells = <1>;
 496                         #size-cells = <0>;
 497                 };
 498
 499                 i2c2: i2c@1c2b400 {
 500                         compatible = "allwinner,sun6i-a31-i2c";
 501                         reg = <0x01c2b400 0x400>;
 502                         interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 503                         clocks = <&ccu CLK_BUS_I2C2>;
 504                         resets = <&ccu RST_BUS_I2C2>;
 505                         status = "disabled";
 506                         #address-cells = <1>;
 507                         #size-cells = <0>;
 508                 };
 509
 510                 i2c3: i2c@1c2b800 {
 511                         compatible = "allwinner,sun6i-a31-i2c";
 512                         reg = <0x01c2b800 0x400>;
 513                         interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 514                         clocks = <&ccu CLK_BUS_I2C3>;
 515                         resets = <&ccu RST_BUS_I2C3>;
 516                         status = "disabled";
 517                         #address-cells = <1>;
 518                         #size-cells = <0>;
 519                 };
 520
 521                 i2c4: i2c@1c2c000 {
 522                         compatible = "allwinner,sun6i-a31-i2c";
 523                         reg = <0x01c2c000 0x400>;
 524                         interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 525                         clocks = <&ccu CLK_BUS_I2C4>;
 526                         resets = <&ccu RST_BUS_I2C4>;
 527                         status = "disabled";
 528                         #address-cells = <1>;
 529                         #size-cells = <0>;
 530                 };
 531
 532                 ahci: sata@1c18000 {
 533                         compatible = "allwinner,sun8i-r40-ahci";
 534                         reg = <0x01c18000 0x1000>;
 535                         interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
 536                         clocks = <&ccu CLK_BUS_SATA>, <&ccu CLK_SATA>;
 537                         resets = <&ccu RST_BUS_SATA>;
 538                         resets-name = "ahci";
 539                         #address-cells = <1>;
 540                         #size-cells = <0>;
 541                         status = "disabled";
 542
 543                 };
 544
 545                 gmac: ethernet@1c50000 {
 546                         compatible = "allwinner,sun8i-r40-gmac";
 547                         syscon = <&ccu>;
 548                         reg = <0x01c50000 0x10000>;
 549                         interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 550                         interrupt-names = "macirq";
 551                         resets = <&ccu RST_BUS_GMAC>;
 552                         reset-names = "stmmaceth";
 553                         clocks = <&ccu CLK_BUS_GMAC>;
 554                         clock-names = "stmmaceth";
 555                         status = "disabled";
 556
 557                         gmac_mdio: mdio {
 558                                 compatible = "snps,dwmac-mdio";
 559                                 #address-cells = <1>;
 560                                 #size-cells = <0>;
 561                         };
 562                 };
 563
 564                 tcon_top: tcon-top@1c70000 {
 565                         compatible = "allwinner,sun8i-r40-tcon-top";
 566                         reg = <0x01c70000 0x1000>;
 567                         clocks = <&ccu CLK_BUS_TCON_TOP>,
 568                                  <&ccu CLK_TCON_TV0>,
 569                                  <&ccu CLK_TVE0>,
 570                                  <&ccu CLK_TCON_TV1>,
 571                                  <&ccu CLK_TVE1>,
 572                                  <&ccu CLK_DSI_DPHY>;
 573                         clock-names = "bus",
 574                                       "tcon-tv0",
 575                                       "tve0",
 576                                       "tcon-tv1",
 577                                       "tve1",
 578                                       "dsi";
 579                         clock-output-names = "tcon-top-tv0",
 580                                              "tcon-top-tv1",
 581                                              "tcon-top-dsi";
 582                         resets = <&ccu RST_BUS_TCON_TOP>;
 583                         #clock-cells = <1>;
 584
 585                         ports {
 586                                 #address-cells = <1>;
 587                                 #size-cells = <0>;
 588
 589                                 tcon_top_mixer0_in: port@0 {
 590                                         #address-cells = <1>;
 591                                         #size-cells = <0>;
 592                                         reg = <0>;
 593
 594                                         tcon_top_mixer0_in_mixer0: endpoint@0 {
 595                                                 reg = <0>;
 596                                                 remote-endpoint = <&mixer0_out_tcon_top>;
 597                                         };
 598                                 };
 599
 600                                 tcon_top_mixer0_out: port@1 {
 601                                         #address-cells = <1>;
 602                                         #size-cells = <0>;
 603                                         reg = <1>;
 604
 605                                         tcon_top_mixer0_out_tcon_lcd0: endpoint@0 {
 606                                                 reg = <0>;
 607                                         };
 608
 609                                         tcon_top_mixer0_out_tcon_lcd1: endpoint@1 {
 610                                                 reg = <1>;
 611                                         };
 612
 613                                         tcon_top_mixer0_out_tcon_tv0: endpoint@2 {
 614                                                 reg = <2>;
 615                                                 remote-endpoint = <&tcon_tv0_in_tcon_top_mixer0>;
 616                                         };
 617
 618                                         tcon_top_mixer0_out_tcon_tv1: endpoint@3 {
 619                                                 reg = <3>;
 620                                                 remote-endpoint = <&tcon_tv1_in_tcon_top_mixer0>;
 621                                         };
 622                                 };
 623
 624                                 tcon_top_mixer1_in: port@2 {
 625                                         #address-cells = <1>;
 626                                         #size-cells = <0>;
 627                                         reg = <2>;
 628
 629                                         tcon_top_mixer1_in_mixer1: endpoint@1 {
 630                                                 reg = <1>;
 631                                                 remote-endpoint = <&mixer1_out_tcon_top>;
 632                                         };
 633                                 };
 634
 635                                 tcon_top_mixer1_out: port@3 {
 636                                         #address-cells = <1>;
 637                                         #size-cells = <0>;
 638                                         reg = <3>;
 639
 640                                         tcon_top_mixer1_out_tcon_lcd0: endpoint@0 {
 641                                                 reg = <0>;
 642                                         };
 643
 644                                         tcon_top_mixer1_out_tcon_lcd1: endpoint@1 {
 645                                                 reg = <1>;
 646                                         };
 647
 648                                         tcon_top_mixer1_out_tcon_tv0: endpoint@2 {
 649                                                 reg = <2>;
 650                                                 remote-endpoint = <&tcon_tv0_in_tcon_top_mixer1>;
 651                                         };
 652
 653                                         tcon_top_mixer1_out_tcon_tv1: endpoint@3 {
 654                                                 reg = <3>;
 655                                                 remote-endpoint = <&tcon_tv1_in_tcon_top_mixer1>;
 656                                         };
 657                                 };
 658
 659                                 tcon_top_hdmi_in: port@4 {
 660                                         #address-cells = <1>;
 661                                         #size-cells = <0>;
 662                                         reg = <4>;
 663
 664                                         tcon_top_hdmi_in_tcon_tv0: endpoint@0 {
 665                                                 reg = <0>;
 666                                                 remote-endpoint = <&tcon_tv0_out_tcon_top>;
 667                                         };
 668
 669                                         tcon_top_hdmi_in_tcon_tv1: endpoint@1 {
 670                                                 reg = <1>;
 671                                                 remote-endpoint = <&tcon_tv1_out_tcon_top>;
 672                                         };
 673                                 };
 674
 675                                 tcon_top_hdmi_out: port@5 {
 676                                         reg = <5>;
 677
 678                                         tcon_top_hdmi_out_hdmi: endpoint {
 679                                                 remote-endpoint = <&hdmi_in_tcon_top>;
 680                                         };
 681                                 };
 682                         };
 683                 };
 684
 685                 tcon_tv0: lcd-controller@1c73000 {
 686                         compatible = "allwinner,sun8i-r40-tcon-tv";
 687                         reg = <0x01c73000 0x1000>;
 688                         interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
 689                         clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top 0>;
 690                         clock-names = "ahb", "tcon-ch1";
 691                         resets = <&ccu RST_BUS_TCON_TV0>;
 692                         reset-names = "lcd";
 693                         status = "disabled";
 694
 695                         ports {
 696                                 #address-cells = <1>;
 697                                 #size-cells = <0>;
 698
 699                                 tcon_tv0_in: port@0 {
 700                                         #address-cells = <1>;
 701                                         #size-cells = <0>;
 702                                         reg = <0>;
 703
 704                                         tcon_tv0_in_tcon_top_mixer0: endpoint@0 {
 705                                                 reg = <0>;
 706                                                 remote-endpoint = <&tcon_top_mixer0_out_tcon_tv0>;
 707                                         };
 708
 709                                         tcon_tv0_in_tcon_top_mixer1: endpoint@1 {
 710                                                 reg = <1>;
 711                                                 remote-endpoint = <&tcon_top_mixer1_out_tcon_tv0>;
 712                                         };
 713                                 };
 714
 715                                 tcon_tv0_out: port@1 {
 716                                         #address-cells = <1>;
 717                                         #size-cells = <0>;
 718                                         reg = <1>;
 719
 720                                         tcon_tv0_out_tcon_top: endpoint@1 {
 721                                                 reg = <1>;
 722                                                 remote-endpoint = <&tcon_top_hdmi_in_tcon_tv0>;
 723                                         };
 724                                 };
 725                         };
 726                 };
 727
 728                 tcon_tv1: lcd-controller@1c74000 {
 729                         compatible = "allwinner,sun8i-r40-tcon-tv";
 730                         reg = <0x01c74000 0x1000>;
 731                         interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 732                         clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top 1>;
 733                         clock-names = "ahb", "tcon-ch1";
 734                         resets = <&ccu RST_BUS_TCON_TV1>;
 735                         reset-names = "lcd";
 736                         status = "disabled";
 737
 738                         ports {
 739                                 #address-cells = <1>;
 740                                 #size-cells = <0>;
 741
 742                                 tcon_tv1_in: port@0 {
 743                                         #address-cells = <1>;
 744                                         #size-cells = <0>;
 745                                         reg = <0>;
 746
 747                                         tcon_tv1_in_tcon_top_mixer0: endpoint@0 {
 748                                                 reg = <0>;
 749                                                 remote-endpoint = <&tcon_top_mixer0_out_tcon_tv1>;
 750                                         };
 751
 752                                         tcon_tv1_in_tcon_top_mixer1: endpoint@1 {
 753                                                 reg = <1>;
 754                                                 remote-endpoint = <&tcon_top_mixer1_out_tcon_tv1>;
 755                                         };
 756                                 };
 757
 758                                 tcon_tv1_out: port@1 {
 759                                         #address-cells = <1>;
 760                                         #size-cells = <0>;
 761                                         reg = <1>;
 762
 763                                         tcon_tv1_out_tcon_top: endpoint@1 {
 764                                                 reg = <1>;
 765                                                 remote-endpoint = <&tcon_top_hdmi_in_tcon_tv1>;
 766                                         };
 767                                 };
 768                         };
 769                 };
 770
 771                 gic: interrupt-controller@1c81000 {
 772                         compatible = "arm,gic-400";
 773                         reg = <0x01c81000 0x1000>,
 774                               <0x01c82000 0x1000>,
 775                               <0x01c84000 0x2000>,
 776                               <0x01c86000 0x2000>;
 777                         interrupt-controller;
 778                         #interrupt-cells = <3>;
 779                         interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 780                 };
 781
 782                 hdmi: hdmi@1ee0000 {
 783                         compatible = "allwinner,sun8i-r40-dw-hdmi",
 784                                      "allwinner,sun8i-a83t-dw-hdmi";
 785                         reg = <0x01ee0000 0x10000>;
 786                         reg-io-width = <1>;
 787                         interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
 788                         clocks = <&ccu CLK_BUS_HDMI0>, <&ccu CLK_HDMI_SLOW>,
 789                                  <&ccu CLK_HDMI>;
 790                         clock-names = "iahb", "isfr", "tmds";
 791                         resets = <&ccu RST_BUS_HDMI1>;
 792                         reset-names = "ctrl";
 793                         phys = <&hdmi_phy>;
 794                         phy-names = "hdmi-phy";
 795                         status = "disabled";
 796
 797                         ports {
 798                                 #address-cells = <1>;
 799                                 #size-cells = <0>;
 800
 801                                 hdmi_in: port@0 {
 802                                         reg = <0>;
 803
 804                                         hdmi_in_tcon_top: endpoint {
 805                                                 remote-endpoint = <&tcon_top_hdmi_out_hdmi>;
 806                                         };
 807                                 };
 808
 809                                 hdmi_out: port@1 {
 810                                         reg = <1>;
 811                                 };
 812                         };
 813                 };
 814
 815                 hdmi_phy: hdmi-phy@1ef0000 {
 816                         compatible = "allwinner,sun8i-r40-hdmi-phy";
 817                         reg = <0x01ef0000 0x10000>;
 818                         clocks = <&ccu CLK_BUS_HDMI1>, <&ccu CLK_HDMI_SLOW>,
 819                                  <&ccu 7>, <&ccu 16>;
 820                         clock-names = "bus", "mod", "pll-0", "pll-1";
 821                         resets = <&ccu RST_BUS_HDMI0>;
 822                         reset-names = "phy";
 823                         #phy-cells = <0>;
 824                 };
 825         };
 826
 827         timer {
 828                 compatible = "arm,armv7-timer";
 829                 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 830                              <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 831                              <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 832                              <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 833         };
 834 };