arch/arm/boot/dts/sun8i-r40.dtsi

   1 /*
   2  * Copyright 2017 Chen-Yu Tsai <wens@csie.org>
   3  * Copyright 2017 Icenowy Zheng <icenowy@aosc.io>
   4  *
   5  * This file is dual-licensed: you can use it either under the terms
   6  * of the GPL or the X11 license, at your option. Note that this dual
   7  * licensing only applies to this file, and not this project as a
   8  * whole.
   9  *
  10  *  a) This file is free software; you can redistribute it and/or
  11  *     modify it under the terms of the GNU General Public License as
  12  *     published by the Free Software Foundation; either version 2 of the
  13  *     License, or (at your option) any later version.
  14  *
  15  *     This file is distributed in the hope that it will be useful,
  16  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18  *     GNU General Public License for more details.
  19  *
  20  * Or, alternatively,
  21  *
  22  *  b) Permission is hereby granted, free of charge, to any person
  23  *     obtaining a copy of this software and associated documentation
  24  *     files (the "Software"), to deal in the Software without
  25  *     restriction, including without limitation the rights to use,
  26  *     copy, modify, merge, publish, distribute, sublicense, and/or
  27  *     sell copies of the Software, and to permit persons to whom the
  28  *     Software is furnished to do so, subject to the following
  29  *     conditions:
  30  *
  31  *     The above copyright notice and this permission notice shall be
  32  *     included in all copies or substantial portions of the Software.
  33  *
  34  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  35  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  36  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  37  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  38  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  39  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  40  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  41  *     OTHER DEALINGS IN THE SOFTWARE.
  42  */
  43
  44 #include <dt-bindings/interrupt-controller/arm-gic.h>
  45 #include <dt-bindings/clock/sun8i-r40-ccu.h>
  46 #include <dt-bindings/reset/sun8i-r40-ccu.h>
  47
  48 / {
  49         #address-cells = <1>;
  50         #size-cells = <1>;
  51         interrupt-parent = <&gic>;
  52
  53         clocks {
  54                 #address-cells = <1>;
  55                 #size-cells = <1>;
  56                 ranges;
  57
  58                 osc24M: osc24M {
  59                         #clock-cells = <0>;
  60                         compatible = "fixed-clock";
  61                         clock-frequency = <24000000>;
  62                         clock-output-names = "osc24M";
  63                 };
  64
  65                 osc32k: osc32k {
  66                         #clock-cells = <0>;
  67                         compatible = "fixed-clock";
  68                         clock-frequency = <32768>;
  69                         clock-output-names = "osc32k";
  70                 };
  71         };
  72
  73         cpus {
  74                 #address-cells = <1>;
  75                 #size-cells = <0>;
  76
  77                 cpu@0 {
  78                         compatible = "arm,cortex-a7";
  79                         device_type = "cpu";
  80                         reg = <0>;
  81                 };
  82
  83                 cpu@1 {
  84                         compatible = "arm,cortex-a7";
  85                         device_type = "cpu";
  86                         reg = <1>;
  87                 };
  88
  89                 cpu@2 {
  90                         compatible = "arm,cortex-a7";
  91                         device_type = "cpu";
  92                         reg = <2>;
  93                 };
  94
  95                 cpu@3 {
  96                         compatible = "arm,cortex-a7";
  97                         device_type = "cpu";
  98                         reg = <3>;
  99                 };
 100         };
 101
 102         soc {
 103                 compatible = "simple-bus";
 104                 #address-cells = <1>;
 105                 #size-cells = <1>;
 106                 ranges;
 107
 108                 nmi_intc: interrupt-controller@1c00030 {
 109                         compatible = "allwinner,sun7i-a20-sc-nmi";
 110                         interrupt-controller;
 111                         #interrupt-cells = <2>;
 112                         reg = <0x01c00030 0x0c>;
 113                         interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
 114                 };
 115
 116                 mmc0: mmc@1c0f000 {
 117                         compatible = "allwinner,sun8i-r40-mmc",
 118                                      "allwinner,sun50i-a64-mmc";
 119                         reg = <0x01c0f000 0x1000>;
 120                         clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
 121                         clock-names = "ahb", "mmc";
 122                         resets = <&ccu RST_BUS_MMC0>;
 123                         reset-names = "ahb";
 124                         pinctrl-0 = <&mmc0_pins>;
 125                         pinctrl-names = "default";
 126                         interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 127                         status = "disabled";
 128                         #address-cells = <1>;
 129                         #size-cells = <0>;
 130                 };
 131
 132                 mmc1: mmc@1c10000 {
 133                         compatible = "allwinner,sun8i-r40-mmc",
 134                                      "allwinner,sun50i-a64-mmc";
 135                         reg = <0x01c10000 0x1000>;
 136                         clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
 137                         clock-names = "ahb", "mmc";
 138                         resets = <&ccu RST_BUS_MMC1>;
 139                         reset-names = "ahb";
 140                         interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 141                         status = "disabled";
 142                         #address-cells = <1>;
 143                         #size-cells = <0>;
 144                 };
 145
 146                 mmc2: mmc@1c11000 {
 147                         compatible = "allwinner,sun8i-r40-emmc",
 148                                      "allwinner,sun50i-a64-emmc";
 149                         reg = <0x01c11000 0x1000>;
 150                         clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
 151                         clock-names = "ahb", "mmc";
 152                         resets = <&ccu RST_BUS_MMC2>;
 153                         reset-names = "ahb";
 154                         pinctrl-0 = <&mmc2_pins>;
 155                         pinctrl-names = "default";
 156                         interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 157                         status = "disabled";
 158                         #address-cells = <1>;
 159                         #size-cells = <0>;
 160                 };
 161
 162                 mmc3: mmc@1c12000 {
 163                         compatible = "allwinner,sun8i-r40-mmc",
 164                                      "allwinner,sun50i-a64-mmc";
 165                         reg = <0x01c12000 0x1000>;
 166                         clocks = <&ccu CLK_BUS_MMC3>, <&ccu CLK_MMC3>;
 167                         clock-names = "ahb", "mmc";
 168                         resets = <&ccu RST_BUS_MMC3>;
 169                         reset-names = "ahb";
 170                         interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 171                         status = "disabled";
 172                         #address-cells = <1>;
 173                         #size-cells = <0>;
 174                 };
 175
 176                 usbphy: phy@1c13400 {
 177                         compatible = "allwinner,sun8i-r40-usb-phy";
 178                         reg = <0x01c13400 0x14>,
 179                               <0x01c14800 0x4>,
 180                               <0x01c19800 0x4>,
 181                               <0x01c1c800 0x4>;
 182                         reg-names = "phy_ctrl",
 183                                     "pmu0",
 184                                     "pmu1",
 185                                     "pmu2";
 186                         clocks = <&ccu CLK_USB_PHY0>,
 187                                  <&ccu CLK_USB_PHY1>,
 188                                  <&ccu CLK_USB_PHY2>;
 189                         clock-names = "usb0_phy",
 190                                       "usb1_phy",
 191                                       "usb2_phy";
 192                         resets = <&ccu RST_USB_PHY0>,
 193                                  <&ccu RST_USB_PHY1>,
 194                                  <&ccu RST_USB_PHY2>;
 195                         reset-names = "usb0_reset",
 196                                       "usb1_reset",
 197                                       "usb2_reset";
 198                         status = "disabled";
 199                         #phy-cells = <1>;
 200                 };
 201
 202                 ehci1: usb@1c19000 {
 203                         compatible = "allwinner,sun8i-r40-ehci", "generic-ehci";
 204                         reg = <0x01c19000 0x100>;
 205                         interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 206                         clocks = <&ccu CLK_BUS_EHCI1>;
 207                         resets = <&ccu RST_BUS_EHCI1>;
 208                         phys = <&usbphy 1>;
 209                         phy-names = "usb";
 210                         status = "disabled";
 211                 };
 212
 213                 ohci1: usb@1c19400 {
 214                         compatible = "allwinner,sun8i-r40-ohci", "generic-ohci";
 215                         reg = <0x01c19400 0x100>;
 216                         interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 217                         clocks = <&ccu CLK_BUS_OHCI1>,
 218                                  <&ccu CLK_USB_OHCI1>;
 219                         resets = <&ccu RST_BUS_OHCI1>;
 220                         phys = <&usbphy 1>;
 221                         phy-names = "usb";
 222                         status = "disabled";
 223                 };
 224
 225                 ehci2: usb@1c1c000 {
 226                         compatible = "allwinner,sun8i-r40-ehci", "generic-ehci";
 227                         reg = <0x01c1c000 0x100>;
 228                         interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 229                         clocks = <&ccu CLK_BUS_EHCI2>;
 230                         resets = <&ccu RST_BUS_EHCI2>;
 231                         phys = <&usbphy 2>;
 232                         phy-names = "usb";
 233                         status = "disabled";
 234                 };
 235
 236                 ohci2: usb@1c1c400 {
 237                         compatible = "allwinner,sun8i-r40-ohci", "generic-ohci";
 238                         reg = <0x01c1c400 0x100>;
 239                         interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 240                         clocks = <&ccu CLK_BUS_OHCI2>,
 241                                  <&ccu CLK_USB_OHCI2>;
 242                         resets = <&ccu RST_BUS_OHCI2>;
 243                         phys = <&usbphy 2>;
 244                         phy-names = "usb";
 245                         status = "disabled";
 246                 };
 247
 248                 ccu: clock@1c20000 {
 249                         compatible = "allwinner,sun8i-r40-ccu";
 250                         reg = <0x01c20000 0x400>;
 251                         clocks = <&osc24M>, <&osc32k>;
 252                         clock-names = "hosc", "losc";
 253                         #clock-cells = <1>;
 254                         #reset-cells = <1>;
 255                 };
 256
 257                 pio: pinctrl@1c20800 {
 258                         compatible = "allwinner,sun8i-r40-pinctrl";
 259                         reg = <0x01c20800 0x400>;
 260                         interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 261                         clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
 262                         clock-names = "apb", "hosc", "losc";
 263                         gpio-controller;
 264                         interrupt-controller;
 265                         #interrupt-cells = <3>;
 266                         #gpio-cells = <3>;
 267
 268                         i2c0_pins: i2c0-pins {
 269                                 pins = "PB0", "PB1";
 270                                 function = "i2c0";
 271                         };
 272
 273                         mmc0_pins: mmc0-pins {
 274                                 pins = "PF0", "PF1", "PF2",
 275                                        "PF3", "PF4", "PF5";
 276                                 function = "mmc0";
 277                                 drive-strength = <30>;
 278                                 bias-pull-up;
 279                         };
 280
 281                         mmc1_pg_pins: mmc1-pg-pins {
 282                                 pins = "PG0", "PG1", "PG2",
 283                                        "PG3", "PG4", "PG5";
 284                                 function = "mmc1";
 285                                 drive-strength = <30>;
 286                                 bias-pull-up;
 287                         };
 288
 289                         mmc2_pins: mmc2-pins {
 290                                 pins = "PC5", "PC6", "PC7", "PC8", "PC9",
 291                                        "PC10", "PC11", "PC12", "PC13", "PC14",
 292                                        "PC15", "PC24";
 293                                 function = "mmc2";
 294                                 drive-strength = <30>;
 295                                 bias-pull-up;
 296                         };
 297
 298                         uart0_pb_pins: uart0-pb-pins {
 299                                 pins = "PB22", "PB23";
 300                                 function = "uart0";
 301                         };
 302                 };
 303
 304                 wdt: watchdog@1c20c90 {
 305                         compatible = "allwinner,sun4i-a10-wdt";
 306                         reg = <0x01c20c90 0x10>;
 307                 };
 308
 309                 uart0: serial@1c28000 {
 310                         compatible = "snps,dw-apb-uart";
 311                         reg = <0x01c28000 0x400>;
 312                         interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 313                         reg-shift = <2>;
 314                         reg-io-width = <4>;
 315                         clocks = <&ccu CLK_BUS_UART0>;
 316                         resets = <&ccu RST_BUS_UART0>;
 317                         status = "disabled";
 318                 };
 319
 320                 uart1: serial@1c28400 {
 321                         compatible = "snps,dw-apb-uart";
 322                         reg = <0x01c28400 0x400>;
 323                         interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 324                         reg-shift = <2>;
 325                         reg-io-width = <4>;
 326                         clocks = <&ccu CLK_BUS_UART1>;
 327                         resets = <&ccu RST_BUS_UART1>;
 328                         status = "disabled";
 329                 };
 330
 331                 uart2: serial@1c28800 {
 332                         compatible = "snps,dw-apb-uart";
 333                         reg = <0x01c28800 0x400>;
 334                         interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 335                         reg-shift = <2>;
 336                         reg-io-width = <4>;
 337                         clocks = <&ccu CLK_BUS_UART2>;
 338                         resets = <&ccu RST_BUS_UART2>;
 339                         status = "disabled";
 340                 };
 341
 342                 uart3: serial@1c28c00 {
 343                         compatible = "snps,dw-apb-uart";
 344                         reg = <0x01c28c00 0x400>;
 345                         interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 346                         reg-shift = <2>;
 347                         reg-io-width = <4>;
 348                         clocks = <&ccu CLK_BUS_UART3>;
 349                         resets = <&ccu RST_BUS_UART3>;
 350                         status = "disabled";
 351                 };
 352
 353                 uart4: serial@1c29000 {
 354                         compatible = "snps,dw-apb-uart";
 355                         reg = <0x01c29000 0x400>;
 356                         interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 357                         reg-shift = <2>;
 358                         reg-io-width = <4>;
 359                         clocks = <&ccu CLK_BUS_UART4>;
 360                         resets = <&ccu RST_BUS_UART4>;
 361                         status = "disabled";
 362                 };
 363
 364                 uart5: serial@1c29400 {
 365                         compatible = "snps,dw-apb-uart";
 366                         reg = <0x01c29400 0x400>;
 367                         interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
 368                         reg-shift = <2>;
 369                         reg-io-width = <4>;
 370                         clocks = <&ccu CLK_BUS_UART5>;
 371                         resets = <&ccu RST_BUS_UART5>;
 372                         status = "disabled";
 373                 };
 374
 375                 uart6: serial@1c29800 {
 376                         compatible = "snps,dw-apb-uart";
 377                         reg = <0x01c29800 0x400>;
 378                         interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 379                         reg-shift = <2>;
 380                         reg-io-width = <4>;
 381                         clocks = <&ccu CLK_BUS_UART6>;
 382                         resets = <&ccu RST_BUS_UART6>;
 383                         status = "disabled";
 384                 };
 385
 386                 uart7: serial@1c29c00 {
 387                         compatible = "snps,dw-apb-uart";
 388                         reg = <0x01c29c00 0x400>;
 389                         interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 390                         reg-shift = <2>;
 391                         reg-io-width = <4>;
 392                         clocks = <&ccu CLK_BUS_UART7>;
 393                         resets = <&ccu RST_BUS_UART7>;
 394                         status = "disabled";
 395                 };
 396
 397                 i2c0: i2c@1c2ac00 {
 398                         compatible = "allwinner,sun6i-a31-i2c";
 399                         reg = <0x01c2ac00 0x400>;
 400                         interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 401                         clocks = <&ccu CLK_BUS_I2C0>;
 402                         resets = <&ccu RST_BUS_I2C0>;
 403                         pinctrl-0 = <&i2c0_pins>;
 404                         pinctrl-names = "default";
 405                         status = "disabled";
 406                         #address-cells = <1>;
 407                         #size-cells = <0>;
 408                 };
 409
 410                 i2c1: i2c@1c2b000 {
 411                         compatible = "allwinner,sun6i-a31-i2c";
 412                         reg = <0x01c2b000 0x400>;
 413                         interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 414                         clocks = <&ccu CLK_BUS_I2C1>;
 415                         resets = <&ccu RST_BUS_I2C1>;
 416                         status = "disabled";
 417                         #address-cells = <1>;
 418                         #size-cells = <0>;
 419                 };
 420
 421                 i2c2: i2c@1c2b400 {
 422                         compatible = "allwinner,sun6i-a31-i2c";
 423                         reg = <0x01c2b400 0x400>;
 424                         interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 425                         clocks = <&ccu CLK_BUS_I2C2>;
 426                         resets = <&ccu RST_BUS_I2C2>;
 427                         status = "disabled";
 428                         #address-cells = <1>;
 429                         #size-cells = <0>;
 430                 };
 431
 432                 i2c3: i2c@1c2b800 {
 433                         compatible = "allwinner,sun6i-a31-i2c";
 434                         reg = <0x01c2b800 0x400>;
 435                         interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 436                         clocks = <&ccu CLK_BUS_I2C3>;
 437                         resets = <&ccu RST_BUS_I2C3>;
 438                         status = "disabled";
 439                         #address-cells = <1>;
 440                         #size-cells = <0>;
 441                 };
 442
 443                 i2c4: i2c@1c2c000 {
 444                         compatible = "allwinner,sun6i-a31-i2c";
 445                         reg = <0x01c2c000 0x400>;
 446                         interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 447                         clocks = <&ccu CLK_BUS_I2C4>;
 448                         resets = <&ccu RST_BUS_I2C4>;
 449                         status = "disabled";
 450                         #address-cells = <1>;
 451                         #size-cells = <0>;
 452                 };
 453
 454                 gic: interrupt-controller@1c81000 {
 455                         compatible = "arm,gic-400";
 456                         reg = <0x01c81000 0x1000>,
 457                               <0x01c82000 0x1000>,
 458                               <0x01c84000 0x2000>,
 459                               <0x01c86000 0x2000>;
 460                         interrupt-controller;
 461                         #interrupt-cells = <3>;
 462                         interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 463                 };
 464         };
 465
 466         timer {
 467                 compatible = "arm,armv7-timer";
 468                 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 469                              <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 470                              <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 471                              <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 472         };
 473 };