2 * Copyright 2015 Chen-Yu Tsai
4 * Chen-Yu Tsai <wens@csie.org>
6 * This file is dual-licensed: you can use it either under the terms
7 * of the GPL or the X11 license, at your option. Note that this dual
8 * licensing only applies to this file, and not this project as a
11 * a) This file is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License as
13 * published by the Free Software Foundation; either version 2 of the
14 * License, or (at your option) any later version.
16 * This file is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
23 * b) Permission is hereby granted, free of charge, to any person
24 * obtaining a copy of this software and associated documentation
25 * files (the "Software"), to deal in the Software without
26 * restriction, including without limitation the rights to use,
27 * copy, modify, merge, publish, distribute, sublicense, and/or
28 * sell copies of the Software, and to permit persons to whom the
29 * Software is furnished to do so, subject to the following
32 * The above copyright notice and this permission notice shall be
33 * included in all copies or substantial portions of the Software.
35 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
36 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
37 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
38 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
39 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
40 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
41 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
42 * OTHER DEALINGS IN THE SOFTWARE.
46 #include "sun8i-a83t.dtsi"
47 #include "sunxi-common-regulators.dtsi"
49 #include <dt-bindings/gpio/gpio.h>
52 model = "Cubietech Cubietruck Plus";
53 compatible = "cubietech,cubietruck-plus", "allwinner,sun8i-a83t";
60 stdout-path = "serial0:115200n8";
64 compatible = "gpio-leds";
67 label = "cubietruck-plus:blue:usr";
68 gpios = <&pio 3 25 GPIO_ACTIVE_HIGH>; /* PD25 */
72 label = "cubietruck-plus:orange:usr";
73 gpios = <&pio 3 26 GPIO_ACTIVE_HIGH>; /* PD26 */
77 label = "cubietruck-plus:white:usr";
78 gpios = <&pio 3 27 GPIO_ACTIVE_HIGH>; /* PD27 */
82 label = "cubietruck-plus:green:usr";
83 gpios = <&pio 4 4 GPIO_ACTIVE_HIGH>; /* PE4 */
88 /* I2C is not connected */
89 compatible = "smsc,usb3503";
90 initial-mode = <1>; /* initialize in HUB mode */
92 intn-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
93 reset-gpios = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */
94 connect-gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
95 refclk-frequency = <19200000>;
99 compatible = "simple-audio-card";
100 simple-audio-card,name = "On-board SPDIF";
102 simple-audio-card,cpu {
103 sound-dai = <&spdif>;
106 simple-audio-card,codec {
107 sound-dai = <&spdif_out>;
111 spdif_out: spdif-out {
112 #sound-dai-cells = <0>;
113 compatible = "linux,spdif-dit";
118 /* GL830 USB-to-SATA bridge here */
123 /* USB3503 HSIC USB 2.0 hub here */
128 pinctrl-names = "default";
129 pinctrl-0 = <&mmc0_pins>;
130 vmmc-supply = <®_vcc3v3>;
132 cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
138 pinctrl-names = "default";
139 pinctrl-0 = <&mmc2_8bit_emmc_pins>;
140 vmmc-supply = <®_vcc3v3>;
151 compatible = "x-powers,axp818", "x-powers,axp813";
153 interrupt-parent = <&r_intc>;
154 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
158 compatible = "x-powers,ac100";
162 compatible = "x-powers,ac100-codec";
163 interrupt-parent = <&r_pio>;
164 interrupts = <0 11 IRQ_TYPE_LEVEL_LOW>; /* PL11 */
166 clock-output-names = "4M_adda";
170 compatible = "x-powers,ac100-rtc";
171 interrupt-parent = <&r_intc>;
172 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
173 clocks = <&ac100_codec>;
175 clock-output-names = "cko1_rtc",
183 gpio = <&pio 3 29 GPIO_ACTIVE_HIGH>; /* PD29 */
188 gpio = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
205 pinctrl-names = "default";
206 pinctrl-0 = <&uart0_pb_pins>;
211 usb1_vbus-supply = <®_usb1_vbus>;
212 usb2_vbus-supply = <®_usb2_vbus>;