arch/arm/boot/dts/sun4i-a10-inet97fv2.dts

   1 /*
   2  * Copyright 2014 Open Source Support GmbH
   3  *
   4  * David Lanzendörfer <david.lanzendoerfer@o2s.ch>
   5  *
   6  * The code contained herein is licensed under the GNU General Public
   7  * License. You may obtain a copy of the GNU General Public License
   8  * Version 2 or later at the following locations:
   9  *
  10  * http://www.opensource.org/licenses/gpl-license.html
  11  * http://www.gnu.org/copyleft/gpl.html
  12  */
  13
  14 /dts-v1/;
  15 /include/ "sun4i-a10.dtsi"
  16 /include/ "sunxi-common-regulators.dtsi"
  17
  18 / {
  19         model = "INet-97F Rev 02";
  20         compatible = "primux,inet97fv2", "allwinner,sun4i-a10";
  21
  22         aliases {
  23                 serial0 = &uart0;
  24         };
  25
  26         soc@01c00000 {
  27                 mmc0: mmc@01c0f000 {
  28                         pinctrl-names = "default";
  29                         pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
  30                         vmmc-supply = <&reg_vcc3v3>;
  31                         bus-width = <4>;
  32                         cd-gpios = <&pio 7 1 0>; /* PH1 */
  33                         cd-inverted;
  34                         status = "okay";
  35                 };
  36
  37                 uart0: serial@01c28000 {
  38                         pinctrl-names = "default";
  39                         pinctrl-0 = <&uart0_pins_a>;
  40                         status = "okay";
  41                 };
  42
  43                 usbphy: phy@01c13400 {
  44                         usb1_vbus-supply = <&reg_usb1_vbus>;
  45                         usb2_vbus-supply = <&reg_usb2_vbus>;
  46                         status = "okay";
  47                 };
  48
  49                 ehci0: usb@01c14000 {
  50                         status = "okay";
  51                 };
  52
  53                 ohci0: usb@01c14400 {
  54                         status = "okay";
  55                 };
  56
  57                 ehci1: usb@01c1c000 {
  58                         status = "okay";
  59                 };
  60
  61                 ohci1: usb@01c1c400 {
  62                         status = "okay";
  63                 };
  64
  65                 i2c0: i2c@01c2ac00 {
  66                         pinctrl-names = "default";
  67                         pinctrl-0 = <&i2c0_pins_a>;
  68                         status = "okay";
  69
  70                         axp209: pmic@34 {
  71                                 compatible = "x-powers,axp209";
  72                                 reg = <0x34>;
  73                                 interrupts = <0>;
  74
  75                                 interrupt-controller;
  76                                 #interrupt-cells = <1>;
  77                         };
  78                 };
  79         };
  80
  81         reg_usb1_vbus: usb1-vbus {
  82                 status = "okay";
  83         };
  84
  85         reg_usb2_vbus: usb2-vbus {
  86                 status = "okay";
  87         };
  88 };