arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts

   1 /*
   2  * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 /dts-v1/;
  13 /include/ "sun4i-a10.dtsi"
  14 /include/ "sunxi-common-regulators.dtsi"
  15
  16 / {
  17         model = "BA10 tvbox";
  18         compatible = "allwinner,ba10-tvbox", "allwinner,sun4i-a10";
  19
  20         soc@01c00000 {
  21                 emac: ethernet@01c0b000 {
  22                         pinctrl-names = "default";
  23                         pinctrl-0 = <&emac_pins_a>;
  24                         phy = <&phy1>;
  25                         status = "okay";
  26                 };
  27
  28                 mdio@01c0b080 {
  29                         status = "okay";
  30
  31                         phy1: ethernet-phy@1 {
  32                                 reg = <1>;
  33                         };
  34                 };
  35
  36                 mmc0: mmc@01c0f000 {
  37                         pinctrl-names = "default";
  38                         pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
  39                         vmmc-supply = <&reg_vcc3v3>;
  40                         bus-width = <4>;
  41                         cd-gpios = <&pio 7 1 0>; /* PH1 */
  42                         cd-inverted;
  43                         status = "okay";
  44                 };
  45
  46                 usbphy: phy@01c13400 {
  47                         usb1_vbus-supply = <&reg_usb1_vbus>;
  48                         usb2_vbus-supply = <&reg_usb2_vbus>;
  49                         status = "okay";
  50                 };
  51
  52                 ehci0: usb@01c14000 {
  53                         status = "okay";
  54                 };
  55
  56                 ohci0: usb@01c14400 {
  57                         status = "okay";
  58                 };
  59
  60                 ehci1: usb@01c1c000 {
  61                         status = "okay";
  62                 };
  63
  64                 ohci1: usb@01c1c400 {
  65                         status = "okay";
  66                 };
  67
  68                 pinctrl@01c20800 {
  69                         usb2_vbus_pin_a: usb2_vbus_pin@0 {
  70                                 allwinner,pins = "PH12";
  71                         };
  72                 };
  73
  74                 ir0: ir@01c21800 {
  75                         pinctrl-names = "default";
  76                         pinctrl-0 = <&ir0_pins_a>;
  77                         status = "okay";
  78                 };
  79
  80                 uart0: serial@01c28000 {
  81                         pinctrl-names = "default";
  82                         pinctrl-0 = <&uart0_pins_a>;
  83                         status = "okay";
  84                 };
  85
  86                 i2c0: i2c@01c2ac00 {
  87                         pinctrl-names = "default";
  88                         pinctrl-0 = <&i2c0_pins_a>;
  89                         status = "okay";
  90
  91                         axp209: pmic@34 {
  92                                 compatible = "x-powers,axp209";
  93                                 reg = <0x34>;
  94                                 interrupts = <0>;
  95
  96                                 interrupt-controller;
  97                                 #interrupt-cells = <1>;
  98                         };
  99                 };
 100         };
 101
 102         reg_usb1_vbus: usb1-vbus {
 103                 status = "okay";
 104         };
 105
 106         reg_usb2_vbus: usb2-vbus {
 107                 gpio = <&pio 7 12 0>;
 108                 status = "okay";
 109         };
 110 };