arch/arm/boot/dts/stm32f429.dtsi

   1 /*
   2  * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com>
   3  *
   4  * This file is dual-licensed: you can use it either under the terms
   5  * of the GPL or the X11 license, at your option. Note that this dual
   6  * licensing only applies to this file, and not this project as a
   7  * whole.
   8  *
   9  *  a) This file is free software; you can redistribute it and/or
  10  *     modify it under the terms of the GNU General Public License as
  11  *     published by the Free Software Foundation; either version 2 of the
  12  *     License, or (at your option) any later version.
  13  *
  14  *     This file is distributed in the hope that it will be useful,
  15  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  *     GNU General Public License for more details.
  18  *
  19  *     You should have received a copy of the GNU General Public
  20  *     License along with this file; if not, write to the Free
  21  *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
  22  *     MA 02110-1301 USA
  23  *
  24  * Or, alternatively,
  25  *
  26  *  b) Permission is hereby granted, free of charge, to any person
  27  *     obtaining a copy of this software and associated documentation
  28  *     files (the "Software"), to deal in the Software without
  29  *     restriction, including without limitation the rights to use,
  30  *     copy, modify, merge, publish, distribute, sublicense, and/or
  31  *     sell copies of the Software, and to permit persons to whom the
  32  *     Software is furnished to do so, subject to the following
  33  *     conditions:
  34  *
  35  *     The above copyright notice and this permission notice shall be
  36  *     included in all copies or substantial portions of the Software.
  37  *
  38  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  39  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  40  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  41  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  42  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  43  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  44  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  45  *     OTHER DEALINGS IN THE SOFTWARE.
  46  */
  47
  48 #include "skeleton.dtsi"
  49 #include "armv7-m.dtsi"
  50 #include <dt-bindings/pinctrl/stm32f429-pinfunc.h>
  51 #include <dt-bindings/clock/stm32fx-clock.h>
  52 #include <dt-bindings/mfd/stm32f4-rcc.h>
  53
  54 / {
  55         clocks {
  56                 clk_hse: clk-hse {
  57                         #clock-cells = <0>;
  58                         compatible = "fixed-clock";
  59                         clock-frequency = <0>;
  60                 };
  61
  62                 clk-lse {
  63                         #clock-cells = <0>;
  64                         compatible = "fixed-clock";
  65                         clock-frequency = <32768>;
  66                 };
  67
  68                 clk_lsi: clk-lsi {
  69                         #clock-cells = <0>;
  70                         compatible = "fixed-clock";
  71                         clock-frequency = <32000>;
  72                 };
  73
  74                 clk_i2s_ckin: i2s-ckin {
  75                         #clock-cells = <0>;
  76                         compatible = "fixed-clock";
  77                         clock-frequency = <0>;
  78                 };
  79         };
  80
  81         soc {
  82                 timer2: timer@40000000 {
  83                         compatible = "st,stm32-timer";
  84                         reg = <0x40000000 0x400>;
  85                         interrupts = <28>;
  86                         clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM2)>;
  87                         status = "disabled";
  88                 };
  89
  90                 timers2: timers@40000000 {
  91                         #address-cells = <1>;
  92                         #size-cells = <0>;
  93                         compatible = "st,stm32-timers";
  94                         reg = <0x40000000 0x400>;
  95                         clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM2)>;
  96                         clock-names = "int";
  97                         status = "disabled";
  98
  99                         pwm {
 100                                 compatible = "st,stm32-pwm";
 101                                 status = "disabled";
 102                         };
 103
 104                         timer@1 {
 105                                 compatible = "st,stm32-timer-trigger";
 106                                 reg = <1>;
 107                                 status = "disabled";
 108                         };
 109                 };
 110
 111                 timer3: timer@40000400 {
 112                         compatible = "st,stm32-timer";
 113                         reg = <0x40000400 0x400>;
 114                         interrupts = <29>;
 115                         clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM3)>;
 116                         status = "disabled";
 117                 };
 118
 119                 timers3: timers@40000400 {
 120                         #address-cells = <1>;
 121                         #size-cells = <0>;
 122                         compatible = "st,stm32-timers";
 123                         reg = <0x40000400 0x400>;
 124                         clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM3)>;
 125                         clock-names = "int";
 126                         status = "disabled";
 127
 128                         pwm {
 129                                 compatible = "st,stm32-pwm";
 130                                 status = "disabled";
 131                         };
 132
 133                         timer@2 {
 134                                 compatible = "st,stm32-timer-trigger";
 135                                 reg = <2>;
 136                                 status = "disabled";
 137                         };
 138                 };
 139
 140                 timer4: timer@40000800 {
 141                         compatible = "st,stm32-timer";
 142                         reg = <0x40000800 0x400>;
 143                         interrupts = <30>;
 144                         clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM4)>;
 145                         status = "disabled";
 146                 };
 147
 148                 timers4: timers@40000800 {
 149                         #address-cells = <1>;
 150                         #size-cells = <0>;
 151                         compatible = "st,stm32-timers";
 152                         reg = <0x40000800 0x400>;
 153                         clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM4)>;
 154                         clock-names = "int";
 155                         status = "disabled";
 156
 157                         pwm {
 158                                 compatible = "st,stm32-pwm";
 159                                 status = "disabled";
 160                         };
 161
 162                         timer@3 {
 163                                 compatible = "st,stm32-timer-trigger";
 164                                 reg = <3>;
 165                                 status = "disabled";
 166                         };
 167                 };
 168
 169                 timer5: timer@40000c00 {
 170                         compatible = "st,stm32-timer";
 171                         reg = <0x40000c00 0x400>;
 172                         interrupts = <50>;
 173                         clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM5)>;
 174                 };
 175
 176                 timers5: timers@40000c00 {
 177                         #address-cells = <1>;
 178                         #size-cells = <0>;
 179                         compatible = "st,stm32-timers";
 180                         reg = <0x40000C00 0x400>;
 181                         clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM5)>;
 182                         clock-names = "int";
 183                         status = "disabled";
 184
 185                         pwm {
 186                                 compatible = "st,stm32-pwm";
 187                                 status = "disabled";
 188                         };
 189
 190                         timer@4 {
 191                                 compatible = "st,stm32-timer-trigger";
 192                                 reg = <4>;
 193                                 status = "disabled";
 194                         };
 195                 };
 196
 197                 timer6: timer@40001000 {
 198                         compatible = "st,stm32-timer";
 199                         reg = <0x40001000 0x400>;
 200                         interrupts = <54>;
 201                         clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM6)>;
 202                         status = "disabled";
 203                 };
 204
 205                 timers6: timers@40001000 {
 206                         #address-cells = <1>;
 207                         #size-cells = <0>;
 208                         compatible = "st,stm32-timers";
 209                         reg = <0x40001000 0x400>;
 210                         clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM6)>;
 211                         clock-names = "int";
 212                         status = "disabled";
 213
 214                         timer@5 {
 215                                 compatible = "st,stm32-timer-trigger";
 216                                 reg = <5>;
 217                                 status = "disabled";
 218                         };
 219                 };
 220
 221                 timer7: timer@40001400 {
 222                         compatible = "st,stm32-timer";
 223                         reg = <0x40001400 0x400>;
 224                         interrupts = <55>;
 225                         clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM7)>;
 226                         status = "disabled";
 227                 };
 228
 229                 timers7: timers@40001400 {
 230                         #address-cells = <1>;
 231                         #size-cells = <0>;
 232                         compatible = "st,stm32-timers";
 233                         reg = <0x40001400 0x400>;
 234                         clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM7)>;
 235                         clock-names = "int";
 236                         status = "disabled";
 237
 238                         timer@6 {
 239                                 compatible = "st,stm32-timer-trigger";
 240                                 reg = <6>;
 241                                 status = "disabled";
 242                         };
 243                 };
 244
 245                 timers12: timers@40001800 {
 246                         #address-cells = <1>;
 247                         #size-cells = <0>;
 248                         compatible = "st,stm32-timers";
 249                         reg = <0x40001800 0x400>;
 250                         clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM12)>;
 251                         clock-names = "int";
 252                         status = "disabled";
 253
 254                         pwm {
 255                                 compatible = "st,stm32-pwm";
 256                                 status = "disabled";
 257                         };
 258
 259                         timer@11 {
 260                                 compatible = "st,stm32-timer-trigger";
 261                                 reg = <11>;
 262                                 status = "disabled";
 263                         };
 264                 };
 265
 266                 timers13: timers@40001c00 {
 267                         #address-cells = <1>;
 268                         #size-cells = <0>;
 269                         compatible = "st,stm32-timers";
 270                         reg = <0x40001C00 0x400>;
 271                         clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM13)>;
 272                         clock-names = "int";
 273                         status = "disabled";
 274
 275                         pwm {
 276                                 compatible = "st,stm32-pwm";
 277                                 status = "disabled";
 278                         };
 279                 };
 280
 281                 timers14: timers@40002000 {
 282                         #address-cells = <1>;
 283                         #size-cells = <0>;
 284                         compatible = "st,stm32-timers";
 285                         reg = <0x40002000 0x400>;
 286                         clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM14)>;
 287                         clock-names = "int";
 288                         status = "disabled";
 289
 290                         pwm {
 291                                 compatible = "st,stm32-pwm";
 292                                 status = "disabled";
 293                         };
 294                 };
 295
 296                 rtc: rtc@40002800 {
 297                         compatible = "st,stm32-rtc";
 298                         reg = <0x40002800 0x400>;
 299                         clocks = <&rcc 1 CLK_RTC>;
 300                         clock-names = "ck_rtc";
 301                         assigned-clocks = <&rcc 1 CLK_RTC>;
 302                         assigned-clock-parents = <&rcc 1 CLK_LSE>;
 303                         interrupt-parent = <&exti>;
 304                         interrupts = <17 1>;
 305                         interrupt-names = "alarm";
 306                         st,syscfg = <&pwrcfg>;
 307                         status = "disabled";
 308                 };
 309
 310                 iwdg: watchdog@40003000 {
 311                         compatible = "st,stm32-iwdg";
 312                         reg = <0x40003000 0x400>;
 313                         clocks = <&clk_lsi>;
 314                         status = "disabled";
 315                 };
 316
 317                 usart2: serial@40004400 {
 318                         compatible = "st,stm32-usart", "st,stm32-uart";
 319                         reg = <0x40004400 0x400>;
 320                         interrupts = <38>;
 321                         clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART2)>;
 322                         status = "disabled";
 323                 };
 324
 325                 usart3: serial@40004800 {
 326                         compatible = "st,stm32-usart", "st,stm32-uart";
 327                         reg = <0x40004800 0x400>;
 328                         interrupts = <39>;
 329                         clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART3)>;
 330                         status = "disabled";
 331                         dmas = <&dma1 1 4 0x400 0x0>,
 332                                <&dma1 3 4 0x400 0x0>;
 333                         dma-names = "rx", "tx";
 334                 };
 335
 336                 usart4: serial@40004c00 {
 337                         compatible = "st,stm32-uart";
 338                         reg = <0x40004c00 0x400>;
 339                         interrupts = <52>;
 340                         clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART4)>;
 341                         status = "disabled";
 342                 };
 343
 344                 usart5: serial@40005000 {
 345                         compatible = "st,stm32-uart";
 346                         reg = <0x40005000 0x400>;
 347                         interrupts = <53>;
 348                         clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART5)>;
 349                         status = "disabled";
 350                 };
 351
 352                 i2c1: i2c@40005400 {
 353                         compatible = "st,stm32f4-i2c";
 354                         reg = <0x40005400 0x400>;
 355                         interrupts = <31>,
 356                                      <32>;
 357                         resets = <&rcc STM32F4_APB1_RESET(I2C1)>;
 358                         clocks = <&rcc 0 STM32F4_APB1_CLOCK(I2C1)>;
 359                         #address-cells = <1>;
 360                         #size-cells = <0>;
 361                         status = "disabled";
 362                 };
 363
 364                 dac: dac@40007400 {
 365                         compatible = "st,stm32f4-dac-core";
 366                         reg = <0x40007400 0x400>;
 367                         resets = <&rcc STM32F4_APB1_RESET(DAC)>;
 368                         clocks = <&rcc 0 STM32F4_APB1_CLOCK(DAC)>;
 369                         clock-names = "pclk";
 370                         #address-cells = <1>;
 371                         #size-cells = <0>;
 372                         status = "disabled";
 373
 374                         dac1: dac@1 {
 375                                 compatible = "st,stm32-dac";
 376                                 #io-channels-cells = <1>;
 377                                 reg = <1>;
 378                                 status = "disabled";
 379                         };
 380
 381                         dac2: dac@2 {
 382                                 compatible = "st,stm32-dac";
 383                                 #io-channels-cells = <1>;
 384                                 reg = <2>;
 385                                 status = "disabled";
 386                         };
 387                 };
 388
 389                 usart7: serial@40007800 {
 390                         compatible = "st,stm32-usart", "st,stm32-uart";
 391                         reg = <0x40007800 0x400>;
 392                         interrupts = <82>;
 393                         clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART7)>;
 394                         status = "disabled";
 395                 };
 396
 397                 usart8: serial@40007c00 {
 398                         compatible = "st,stm32-usart", "st,stm32-uart";
 399                         reg = <0x40007c00 0x400>;
 400                         interrupts = <83>;
 401                         clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART8)>;
 402                         status = "disabled";
 403                 };
 404
 405                 timers1: timers@40010000 {
 406                         #address-cells = <1>;
 407                         #size-cells = <0>;
 408                         compatible = "st,stm32-timers";
 409                         reg = <0x40010000 0x400>;
 410                         clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM1)>;
 411                         clock-names = "int";
 412                         status = "disabled";
 413
 414                         pwm {
 415                                 compatible = "st,stm32-pwm";
 416                                 status = "disabled";
 417                         };
 418
 419                         timer@0 {
 420                                 compatible = "st,stm32-timer-trigger";
 421                                 reg = <0>;
 422                                 status = "disabled";
 423                         };
 424                 };
 425
 426                 timers8: timers@40010400 {
 427                         #address-cells = <1>;
 428                         #size-cells = <0>;
 429                         compatible = "st,stm32-timers";
 430                         reg = <0x40010400 0x400>;
 431                         clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM8)>;
 432                         clock-names = "int";
 433                         status = "disabled";
 434
 435                         pwm {
 436                                 compatible = "st,stm32-pwm";
 437                                 status = "disabled";
 438                         };
 439
 440                         timer@7 {
 441                                 compatible = "st,stm32-timer-trigger";
 442                                 reg = <7>;
 443                                 status = "disabled";
 444                         };
 445                 };
 446
 447                 usart1: serial@40011000 {
 448                         compatible = "st,stm32-usart", "st,stm32-uart";
 449                         reg = <0x40011000 0x400>;
 450                         interrupts = <37>;
 451                         clocks = <&rcc 0 STM32F4_APB2_CLOCK(USART1)>;
 452                         status = "disabled";
 453                         dmas = <&dma2 2 4 0x400 0x0>,
 454                                <&dma2 7 4 0x400 0x0>;
 455                         dma-names = "rx", "tx";
 456                 };
 457
 458                 usart6: serial@40011400 {
 459                         compatible = "st,stm32-usart", "st,stm32-uart";
 460                         reg = <0x40011400 0x400>;
 461                         interrupts = <71>;
 462                         clocks = <&rcc 0 STM32F4_APB2_CLOCK(USART6)>;
 463                         status = "disabled";
 464                 };
 465
 466                 adc: adc@40012000 {
 467                         compatible = "st,stm32f4-adc-core";
 468                         reg = <0x40012000 0x400>;
 469                         interrupts = <18>;
 470                         clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC1)>;
 471                         clock-names = "adc";
 472                         interrupt-controller;
 473                         #interrupt-cells = <1>;
 474                         #address-cells = <1>;
 475                         #size-cells = <0>;
 476                         status = "disabled";
 477
 478                         adc1: adc@0 {
 479                                 compatible = "st,stm32f4-adc";
 480                                 #io-channel-cells = <1>;
 481                                 reg = <0x0>;
 482                                 clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC1)>;
 483                                 interrupt-parent = <&adc>;
 484                                 interrupts = <0>;
 485                                 dmas = <&dma2 0 0 0x400 0x0>;
 486                                 dma-names = "rx";
 487                                 status = "disabled";
 488                         };
 489
 490                         adc2: adc@100 {
 491                                 compatible = "st,stm32f4-adc";
 492                                 #io-channel-cells = <1>;
 493                                 reg = <0x100>;
 494                                 clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC2)>;
 495                                 interrupt-parent = <&adc>;
 496                                 interrupts = <1>;
 497                                 dmas = <&dma2 3 1 0x400 0x0>;
 498                                 dma-names = "rx";
 499                                 status = "disabled";
 500                         };
 501
 502                         adc3: adc@200 {
 503                                 compatible = "st,stm32f4-adc";
 504                                 #io-channel-cells = <1>;
 505                                 reg = <0x200>;
 506                                 clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC3)>;
 507                                 interrupt-parent = <&adc>;
 508                                 interrupts = <2>;
 509                                 dmas = <&dma2 1 2 0x400 0x0>;
 510                                 dma-names = "rx";
 511                                 status = "disabled";
 512                         };
 513                 };
 514
 515                 syscfg: system-config@40013800 {
 516                         compatible = "syscon";
 517                         reg = <0x40013800 0x400>;
 518                 };
 519
 520                 exti: interrupt-controller@40013c00 {
 521                         compatible = "st,stm32-exti";
 522                         interrupt-controller;
 523                         #interrupt-cells = <2>;
 524                         reg = <0x40013C00 0x400>;
 525                         interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>;
 526                 };
 527
 528                 timers9: timers@40014000 {
 529                         #address-cells = <1>;
 530                         #size-cells = <0>;
 531                         compatible = "st,stm32-timers";
 532                         reg = <0x40014000 0x400>;
 533                         clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM9)>;
 534                         clock-names = "int";
 535                         status = "disabled";
 536
 537                         pwm {
 538                                 compatible = "st,stm32-pwm";
 539                                 status = "disabled";
 540                         };
 541
 542                         timer@8 {
 543                                 compatible = "st,stm32-timer-trigger";
 544                                 reg = <8>;
 545                                 status = "disabled";
 546                         };
 547                 };
 548
 549                 timers10: timers@40014400 {
 550                         #address-cells = <1>;
 551                         #size-cells = <0>;
 552                         compatible = "st,stm32-timers";
 553                         reg = <0x40014400 0x400>;
 554                         clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM10)>;
 555                         clock-names = "int";
 556                         status = "disabled";
 557
 558                         pwm {
 559                                 compatible = "st,stm32-pwm";
 560                                 status = "disabled";
 561                         };
 562                 };
 563
 564                 timers11: timers@40014800 {
 565                         #address-cells = <1>;
 566                         #size-cells = <0>;
 567                         compatible = "st,stm32-timers";
 568                         reg = <0x40014800 0x400>;
 569                         clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM11)>;
 570                         clock-names = "int";
 571                         status = "disabled";
 572
 573                         pwm {
 574                                 compatible = "st,stm32-pwm";
 575                                 status = "disabled";
 576                         };
 577                 };
 578
 579                 pwrcfg: power-config@40007000 {
 580                         compatible = "syscon";
 581                         reg = <0x40007000 0x400>;
 582                 };
 583
 584                 ltdc: display-controller@40016800 {
 585                         compatible = "st,stm32-ltdc";
 586                         reg = <0x40016800 0x200>;
 587                         interrupts = <88>, <89>;
 588                         resets = <&rcc STM32F4_APB2_RESET(LTDC)>;
 589                         clocks = <&rcc 1 CLK_LCD>;
 590                         clock-names = "lcd";
 591                         status = "disabled";
 592                 };
 593
 594                 pinctrl: pin-controller {
 595                         #address-cells = <1>;
 596                         #size-cells = <1>;
 597                         compatible = "st,stm32f429-pinctrl";
 598                         ranges = <0 0x40020000 0x3000>;
 599                         interrupt-parent = <&exti>;
 600                         st,syscfg = <&syscfg 0x8>;
 601                         pins-are-numbered;
 602
 603                         gpioa: gpio@40020000 {
 604                                 gpio-controller;
 605                                 #gpio-cells = <2>;
 606                                 interrupt-controller;
 607                                 #interrupt-cells = <2>;
 608                                 reg = <0x0 0x400>;
 609                                 clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)>;
 610                                 st,bank-name = "GPIOA";
 611                         };
 612
 613                         gpiob: gpio@40020400 {
 614                                 gpio-controller;
 615                                 #gpio-cells = <2>;
 616                                 interrupt-controller;
 617                                 #interrupt-cells = <2>;
 618                                 reg = <0x400 0x400>;
 619                                 clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOB)>;
 620                                 st,bank-name = "GPIOB";
 621                         };
 622
 623                         gpioc: gpio@40020800 {
 624                                 gpio-controller;
 625                                 #gpio-cells = <2>;
 626                                 interrupt-controller;
 627                                 #interrupt-cells = <2>;
 628                                 reg = <0x800 0x400>;
 629                                 clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOC)>;
 630                                 st,bank-name = "GPIOC";
 631                         };
 632
 633                         gpiod: gpio@40020c00 {
 634                                 gpio-controller;
 635                                 #gpio-cells = <2>;
 636                                 interrupt-controller;
 637                                 #interrupt-cells = <2>;
 638                                 reg = <0xc00 0x400>;
 639                                 clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOD)>;
 640                                 st,bank-name = "GPIOD";
 641                         };
 642
 643                         gpioe: gpio@40021000 {
 644                                 gpio-controller;
 645                                 #gpio-cells = <2>;
 646                                 interrupt-controller;
 647                                 #interrupt-cells = <2>;
 648                                 reg = <0x1000 0x400>;
 649                                 clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOE)>;
 650                                 st,bank-name = "GPIOE";
 651                         };
 652
 653                         gpiof: gpio@40021400 {
 654                                 gpio-controller;
 655                                 #gpio-cells = <2>;
 656                                 interrupt-controller;
 657                                 #interrupt-cells = <2>;
 658                                 reg = <0x1400 0x400>;
 659                                 clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOF)>;
 660                                 st,bank-name = "GPIOF";
 661                         };
 662
 663                         gpiog: gpio@40021800 {
 664                                 gpio-controller;
 665                                 #gpio-cells = <2>;
 666                                 interrupt-controller;
 667                                 #interrupt-cells = <2>;
 668                                 reg = <0x1800 0x400>;
 669                                 clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOG)>;
 670                                 st,bank-name = "GPIOG";
 671                         };
 672
 673                         gpioh: gpio@40021c00 {
 674                                 gpio-controller;
 675                                 #gpio-cells = <2>;
 676                                 interrupt-controller;
 677                                 #interrupt-cells = <2>;
 678                                 reg = <0x1c00 0x400>;
 679                                 clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOH)>;
 680                                 st,bank-name = "GPIOH";
 681                         };
 682
 683                         gpioi: gpio@40022000 {
 684                                 gpio-controller;
 685                                 #gpio-cells = <2>;
 686                                 interrupt-controller;
 687                                 #interrupt-cells = <2>;
 688                                 reg = <0x2000 0x400>;
 689                                 clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOI)>;
 690                                 st,bank-name = "GPIOI";
 691                         };
 692
 693                         gpioj: gpio@40022400 {
 694                                 gpio-controller;
 695                                 #gpio-cells = <2>;
 696                                 interrupt-controller;
 697                                 #interrupt-cells = <2>;
 698                                 reg = <0x2400 0x400>;
 699                                 clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOJ)>;
 700                                 st,bank-name = "GPIOJ";
 701                         };
 702
 703                         gpiok: gpio@40022800 {
 704                                 gpio-controller;
 705                                 #gpio-cells = <2>;
 706                                 interrupt-controller;
 707                                 #interrupt-cells = <2>;
 708                                 reg = <0x2800 0x400>;
 709                                 clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOK)>;
 710                                 st,bank-name = "GPIOK";
 711                         };
 712
 713                         usart1_pins_a: usart1@0 {
 714                                 pins1 {
 715                                         pinmux = <STM32F429_PA9_FUNC_USART1_TX>;
 716                                         bias-disable;
 717                                         drive-push-pull;
 718                                         slew-rate = <0>;
 719                                 };
 720                                 pins2 {
 721                                         pinmux = <STM32F429_PA10_FUNC_USART1_RX>;
 722                                         bias-disable;
 723                                 };
 724                         };
 725
 726                         usart3_pins_a: usart3@0 {
 727                                 pins1 {
 728                                         pinmux = <STM32F429_PB10_FUNC_USART3_TX>;
 729                                         bias-disable;
 730                                         drive-push-pull;
 731                                         slew-rate = <0>;
 732                                 };
 733                                 pins2 {
 734                                         pinmux = <STM32F429_PB11_FUNC_USART3_RX>;
 735                                         bias-disable;
 736                                 };
 737                         };
 738
 739                         usbotg_fs_pins_a: usbotg_fs@0 {
 740                                 pins {
 741                                         pinmux = <STM32F429_PA10_FUNC_OTG_FS_ID>,
 742                                                  <STM32F429_PA11_FUNC_OTG_FS_DM>,
 743                                                  <STM32F429_PA12_FUNC_OTG_FS_DP>;
 744                                         bias-disable;
 745                                         drive-push-pull;
 746                                         slew-rate = <2>;
 747                                 };
 748                         };
 749
 750                         usbotg_fs_pins_b: usbotg_fs@1 {
 751                                 pins {
 752                                         pinmux = <STM32F429_PB12_FUNC_OTG_HS_ID>,
 753                                                  <STM32F429_PB14_FUNC_OTG_HS_DM>,
 754                                                  <STM32F429_PB15_FUNC_OTG_HS_DP>;
 755                                         bias-disable;
 756                                         drive-push-pull;
 757                                         slew-rate = <2>;
 758                                 };
 759                         };
 760
 761                         usbotg_hs_pins_a: usbotg_hs@0 {
 762                                 pins {
 763                                         pinmux = <STM32F429_PH4_FUNC_OTG_HS_ULPI_NXT>,
 764                                                  <STM32F429_PI11_FUNC_OTG_HS_ULPI_DIR>,
 765                                                  <STM32F429_PC0_FUNC_OTG_HS_ULPI_STP>,
 766                                                  <STM32F429_PA5_FUNC_OTG_HS_ULPI_CK>,
 767                                                  <STM32F429_PA3_FUNC_OTG_HS_ULPI_D0>,
 768                                                  <STM32F429_PB0_FUNC_OTG_HS_ULPI_D1>,
 769                                                  <STM32F429_PB1_FUNC_OTG_HS_ULPI_D2>,
 770                                                  <STM32F429_PB10_FUNC_OTG_HS_ULPI_D3>,
 771                                                  <STM32F429_PB11_FUNC_OTG_HS_ULPI_D4>,
 772                                                  <STM32F429_PB12_FUNC_OTG_HS_ULPI_D5>,
 773                                                  <STM32F429_PB13_FUNC_OTG_HS_ULPI_D6>,
 774                                                  <STM32F429_PB5_FUNC_OTG_HS_ULPI_D7>;
 775                                         bias-disable;
 776                                         drive-push-pull;
 777                                         slew-rate = <2>;
 778                                 };
 779                         };
 780
 781                         ethernet_mii: mii@0 {
 782                                 pins {
 783                                         pinmux = <STM32F429_PG13_FUNC_ETH_MII_TXD0_ETH_RMII_TXD0>,
 784                                                  <STM32F429_PG14_FUNC_ETH_MII_TXD1_ETH_RMII_TXD1>,
 785                                                  <STM32F429_PC2_FUNC_ETH_MII_TXD2>,
 786                                                  <STM32F429_PB8_FUNC_ETH_MII_TXD3>,
 787                                                  <STM32F429_PC3_FUNC_ETH_MII_TX_CLK>,
 788                                                  <STM32F429_PG11_FUNC_ETH_MII_TX_EN_ETH_RMII_TX_EN>,
 789                                                  <STM32F429_PA2_FUNC_ETH_MDIO>,
 790                                                  <STM32F429_PC1_FUNC_ETH_MDC>,
 791                                                  <STM32F429_PA1_FUNC_ETH_MII_RX_CLK_ETH_RMII_REF_CLK>,
 792                                                  <STM32F429_PA7_FUNC_ETH_MII_RX_DV_ETH_RMII_CRS_DV>,
 793                                                  <STM32F429_PC4_FUNC_ETH_MII_RXD0_ETH_RMII_RXD0>,
 794                                                  <STM32F429_PC5_FUNC_ETH_MII_RXD1_ETH_RMII_RXD1>,
 795                                                  <STM32F429_PH6_FUNC_ETH_MII_RXD2>,
 796                                                  <STM32F429_PH7_FUNC_ETH_MII_RXD3>;
 797                                         slew-rate = <2>;
 798                                 };
 799                         };
 800
 801                         adc3_in8_pin: adc@200 {
 802                                 pins {
 803                                         pinmux = <STM32F429_PF10_FUNC_ANALOG>;
 804                                 };
 805                         };
 806
 807                         pwm1_pins: pwm@1 {
 808                                 pins {
 809                                         pinmux = <STM32F429_PA8_FUNC_TIM1_CH1>,
 810                                                  <STM32F429_PB13_FUNC_TIM1_CH1N>,
 811                                                  <STM32F429_PB12_FUNC_TIM1_BKIN>;
 812                                 };
 813                         };
 814
 815                         pwm3_pins: pwm@3 {
 816                                 pins {
 817                                         pinmux = <STM32F429_PB4_FUNC_TIM3_CH1>,
 818                                                  <STM32F429_PB5_FUNC_TIM3_CH2>;
 819                                 };
 820                         };
 821
 822                         i2c1_pins: i2c1@0 {
 823                                 pins {
 824                                         pinmux = <STM32F429_PB9_FUNC_I2C1_SDA>,
 825                                                  <STM32F429_PB6_FUNC_I2C1_SCL>;
 826                                         bias-disable;
 827                                         drive-open-drain;
 828                                         slew-rate = <3>;
 829                                 };
 830                         };
 831
 832                         ltdc_pins: ltdc@0 {
 833                                 pins {
 834                                         pinmux = <STM32F429_PI12_FUNC_LCD_HSYNC>,
 835                                                  <STM32F429_PI13_FUNC_LCD_VSYNC>,
 836                                                  <STM32F429_PI14_FUNC_LCD_CLK>,
 837                                                  <STM32F429_PI15_FUNC_LCD_R0>,
 838                                                  <STM32F429_PJ0_FUNC_LCD_R1>,
 839                                                  <STM32F429_PJ1_FUNC_LCD_R2>,
 840                                                  <STM32F429_PJ2_FUNC_LCD_R3>,
 841                                                  <STM32F429_PJ3_FUNC_LCD_R4>,
 842                                                  <STM32F429_PJ4_FUNC_LCD_R5>,
 843                                                  <STM32F429_PJ5_FUNC_LCD_R6>,
 844                                                  <STM32F429_PJ6_FUNC_LCD_R7>,
 845                                                  <STM32F429_PJ7_FUNC_LCD_G0>,
 846                                                  <STM32F429_PJ8_FUNC_LCD_G1>,
 847                                                  <STM32F429_PJ9_FUNC_LCD_G2>,
 848                                                  <STM32F429_PJ10_FUNC_LCD_G3>,
 849                                                  <STM32F429_PJ11_FUNC_LCD_G4>,
 850                                                  <STM32F429_PJ12_FUNC_LCD_B0>,
 851                                                  <STM32F429_PJ13_FUNC_LCD_B1>,
 852                                                  <STM32F429_PJ14_FUNC_LCD_B2>,
 853                                                  <STM32F429_PJ15_FUNC_LCD_B3>,
 854                                                  <STM32F429_PK0_FUNC_LCD_G5>,
 855                                                  <STM32F429_PK1_FUNC_LCD_G6>,
 856                                                  <STM32F429_PK2_FUNC_LCD_G7>,
 857                                                  <STM32F429_PK3_FUNC_LCD_B4>,
 858                                                  <STM32F429_PK4_FUNC_LCD_B5>,
 859                                                  <STM32F429_PK5_FUNC_LCD_B6>,
 860                                                  <STM32F429_PK6_FUNC_LCD_B7>,
 861                                                  <STM32F429_PK7_FUNC_LCD_DE>;
 862                                         slew-rate = <2>;
 863                                 };
 864                         };
 865
 866                         dcmi_pins: dcmi@0 {
 867                                 pins {
 868                                         pinmux = <STM32F429_PA4_FUNC_DCMI_HSYNC>,
 869                                                  <STM32F429_PB7_FUNC_DCMI_VSYNC>,
 870                                                  <STM32F429_PA6_FUNC_DCMI_PIXCLK>,
 871                                                  <STM32F429_PC6_FUNC_DCMI_D0>,
 872                                                  <STM32F429_PC7_FUNC_DCMI_D1>,
 873                                                  <STM32F429_PC8_FUNC_DCMI_D2>,
 874                                                  <STM32F429_PC9_FUNC_DCMI_D3>,
 875                                                  <STM32F429_PC11_FUNC_DCMI_D4>,
 876                                                  <STM32F429_PD3_FUNC_DCMI_D5>,
 877                                                  <STM32F429_PB8_FUNC_DCMI_D6>,
 878                                                  <STM32F429_PE6_FUNC_DCMI_D7>,
 879                                                  <STM32F429_PC10_FUNC_DCMI_D8>,
 880                                                  <STM32F429_PC12_FUNC_DCMI_D9>,
 881                                                  <STM32F429_PD6_FUNC_DCMI_D10>,
 882                                                  <STM32F429_PD2_FUNC_DCMI_D11>;
 883                                         bias-disable;
 884                                         drive-push-pull;
 885                                         slew-rate = <3>;
 886                                 };
 887                         };
 888                 };
 889
 890                 crc: crc@40023000 {
 891                         compatible = "st,stm32f4-crc";
 892                         reg = <0x40023000 0x400>;
 893                         clocks = <&rcc 0 STM32F4_AHB1_CLOCK(CRC)>;
 894                         status = "disabled";
 895                 };
 896
 897                 rcc: rcc@40023810 {
 898                         #reset-cells = <1>;
 899                         #clock-cells = <2>;
 900                         compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
 901                         reg = <0x40023800 0x400>;
 902                         clocks = <&clk_hse>, <&clk_i2s_ckin>;
 903                         st,syscfg = <&pwrcfg>;
 904                         assigned-clocks = <&rcc 1 CLK_HSE_RTC>;
 905                         assigned-clock-rates = <1000000>;
 906                 };
 907
 908                 dma1: dma-controller@40026000 {
 909                         compatible = "st,stm32-dma";
 910                         reg = <0x40026000 0x400>;
 911                         interrupts = <11>,
 912                                      <12>,
 913                                      <13>,
 914                                      <14>,
 915                                      <15>,
 916                                      <16>,
 917                                      <17>,
 918                                      <47>;
 919                         clocks = <&rcc 0 STM32F4_AHB1_CLOCK(DMA1)>;
 920                         #dma-cells = <4>;
 921                 };
 922
 923                 dma2: dma-controller@40026400 {
 924                         compatible = "st,stm32-dma";
 925                         reg = <0x40026400 0x400>;
 926                         interrupts = <56>,
 927                                      <57>,
 928                                      <58>,
 929                                      <59>,
 930                                      <60>,
 931                                      <68>,
 932                                      <69>,
 933                                      <70>;
 934                         clocks = <&rcc 0 STM32F4_AHB1_CLOCK(DMA2)>;
 935                         #dma-cells = <4>;
 936                         st,mem2mem;
 937                 };
 938
 939                 mac: ethernet@40028000 {
 940                         compatible = "st,stm32-dwmac", "snps,dwmac-3.50a";
 941                         reg = <0x40028000 0x8000>;
 942                         reg-names = "stmmaceth";
 943                         interrupts = <61>;
 944                         interrupt-names = "macirq";
 945                         clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx";
 946                         clocks = <&rcc 0 STM32F4_AHB1_CLOCK(ETHMAC)>,
 947                                         <&rcc 0 STM32F4_AHB1_CLOCK(ETHMACTX)>,
 948                                         <&rcc 0 STM32F4_AHB1_CLOCK(ETHMACRX)>;
 949                         st,syscon = <&syscfg 0x4>;
 950                         snps,pbl = <8>;
 951                         snps,mixed-burst;
 952                         status = "disabled";
 953                 };
 954
 955                 usbotg_hs: usb@40040000 {
 956                         compatible = "snps,dwc2";
 957                         reg = <0x40040000 0x40000>;
 958                         interrupts = <77>;
 959                         clocks = <&rcc 0 STM32F4_AHB1_CLOCK(OTGHS)>;
 960                         clock-names = "otg";
 961                         status = "disabled";
 962                 };
 963
 964                 usbotg_fs: usb@50000000 {
 965                         compatible = "st,stm32f4x9-fsotg";
 966                         reg = <0x50000000 0x40000>;
 967                         interrupts = <67>;
 968                         clocks = <&rcc 0 39>;
 969                         clock-names = "otg";
 970                         status = "disabled";
 971                 };
 972
 973                 dcmi: dcmi@50050000 {
 974                         compatible = "st,stm32-dcmi";
 975                         reg = <0x50050000 0x400>;
 976                         interrupts = <78>;
 977                         resets = <&rcc STM32F4_AHB2_RESET(DCMI)>;
 978                         clocks = <&rcc 0 STM32F4_AHB2_CLOCK(DCMI)>;
 979                         clock-names = "mclk";
 980                         pinctrl-names = "default";
 981                         pinctrl-0 = <&dcmi_pins>;
 982                         dmas = <&dma2 1 1 0x414 0x3>;
 983                         dma-names = "tx";
 984                         status = "disabled";
 985                 };
 986
 987                 rng: rng@50060800 {
 988                         compatible = "st,stm32-rng";
 989                         reg = <0x50060800 0x400>;
 990                         interrupts = <80>;
 991                         clocks = <&rcc 0 STM32F4_AHB2_CLOCK(RNG)>;
 992
 993                 };
 994         };
 995 };
 996
 997 &systick {
 998         clocks = <&rcc 1 SYSTICK>;
 999         status = "okay";
1000 };