arch/arm/boot/dts/spear600.dtsi

   1 /*
   2  * Copyright 2012 Stefan Roese <sr@denx.de>
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 /include/ "skeleton.dtsi"
  13
  14 / {
  15         compatible = "st,spear600";
  16
  17         cpus {
  18                 cpu@0 {
  19                         compatible = "arm,arm926ejs";
  20                 };
  21         };
  22
  23         memory {
  24                 device_type = "memory";
  25                 reg = <0 0x40000000>;
  26         };
  27
  28         ahb {
  29                 #address-cells = <1>;
  30                 #size-cells = <1>;
  31                 compatible = "simple-bus";
  32                 ranges = <0xd0000000 0xd0000000 0x30000000>;
  33
  34                 vic0: interrupt-controller@f1100000 {
  35                         compatible = "arm,pl190-vic";
  36                         interrupt-controller;
  37                         reg = <0xf1100000 0x1000>;
  38                         #interrupt-cells = <1>;
  39                 };
  40
  41                 vic1: interrupt-controller@f1000000 {
  42                         compatible = "arm,pl190-vic";
  43                         interrupt-controller;
  44                         reg = <0xf1000000 0x1000>;
  45                         #interrupt-cells = <1>;
  46                 };
  47
  48                 dma@fc400000 {
  49                         compatible = "arm,pl080", "arm,primecell";
  50                         reg = <0xfc400000 0x1000>;
  51                         interrupt-parent = <&vic1>;
  52                         interrupts = <10>;
  53                         status = "disabled";
  54                 };
  55
  56                 gmac: ethernet@e0800000 {
  57                         compatible = "st,spear600-gmac";
  58                         reg = <0xe0800000 0x8000>;
  59                         interrupt-parent = <&vic1>;
  60                         interrupts = <24 23>;
  61                         interrupt-names = "macirq", "eth_wake_irq";
  62                         status = "disabled";
  63                 };
  64
  65                 fsmc: flash@d1800000 {
  66                         compatible = "st,spear600-fsmc-nand";
  67                         #address-cells = <1>;
  68                         #size-cells = <1>;
  69                         reg = <0xd1800000 0x1000        /* FSMC Register */
  70                                0xd2000000 0x4000>;      /* NAND Base */
  71                         reg-names = "fsmc_regs", "nand_data";
  72                         st,ale-off = <0x20000>;
  73                         st,cle-off = <0x10000>;
  74                         status = "disabled";
  75                 };
  76
  77                 smi: flash@fc000000 {
  78                         compatible = "st,spear600-smi";
  79                         #address-cells = <1>;
  80                         #size-cells = <1>;
  81                         reg = <0xfc000000 0x1000>;
  82                         interrupt-parent = <&vic1>;
  83                         interrupts = <12>;
  84                         status = "disabled";
  85                 };
  86
  87                 ehci@e1800000 {
  88                         compatible = "st,spear600-ehci", "usb-ehci";
  89                         reg = <0xe1800000 0x1000>;
  90                         interrupt-parent = <&vic1>;
  91                         interrupts = <27>;
  92                         status = "disabled";
  93                 };
  94
  95                 ehci@e2000000 {
  96                         compatible = "st,spear600-ehci", "usb-ehci";
  97                         reg = <0xe2000000 0x1000>;
  98                         interrupt-parent = <&vic1>;
  99                         interrupts = <29>;
 100                         status = "disabled";
 101                 };
 102
 103                 ohci@e1900000 {
 104                         compatible = "st,spear600-ohci", "usb-ohci";
 105                         reg = <0xe1900000 0x1000>;
 106                         interrupt-parent = <&vic1>;
 107                         interrupts = <26>;
 108                         status = "disabled";
 109                 };
 110
 111                 ohci@e2100000 {
 112                         compatible = "st,spear600-ohci", "usb-ohci";
 113                         reg = <0xe2100000 0x1000>;
 114                         interrupt-parent = <&vic1>;
 115                         interrupts = <28>;
 116                         status = "disabled";
 117                 };
 118
 119                 apb {
 120                         #address-cells = <1>;
 121                         #size-cells = <1>;
 122                         compatible = "simple-bus";
 123                         ranges = <0xd0000000 0xd0000000 0x30000000>;
 124
 125                         serial@d0000000 {
 126                                 compatible = "arm,pl011", "arm,primecell";
 127                                 reg = <0xd0000000 0x1000>;
 128                                 interrupt-parent = <&vic0>;
 129                                 interrupts = <24>;
 130                                 status = "disabled";
 131                         };
 132
 133                         serial@d0080000 {
 134                                 compatible = "arm,pl011", "arm,primecell";
 135                                 reg = <0xd0080000 0x1000>;
 136                                 interrupt-parent = <&vic0>;
 137                                 interrupts = <25>;
 138                                 status = "disabled";
 139                         };
 140
 141                         /* local/cpu GPIO */
 142                         gpio0: gpio@f0100000 {
 143                                 #gpio-cells = <2>;
 144                                 compatible = "arm,pl061", "arm,primecell";
 145                                 gpio-controller;
 146                                 reg = <0xf0100000 0x1000>;
 147                                 interrupt-parent = <&vic0>;
 148                                 interrupts = <18>;
 149                         };
 150
 151                         /* basic GPIO */
 152                         gpio1: gpio@fc980000 {
 153                                 #gpio-cells = <2>;
 154                                 compatible = "arm,pl061", "arm,primecell";
 155                                 gpio-controller;
 156                                 reg = <0xfc980000 0x1000>;
 157                                 interrupt-parent = <&vic1>;
 158                                 interrupts = <19>;
 159                         };
 160
 161                         /* appl GPIO */
 162                         gpio2: gpio@d8100000 {
 163                                 #gpio-cells = <2>;
 164                                 compatible = "arm,pl061", "arm,primecell";
 165                                 gpio-controller;
 166                                 reg = <0xd8100000 0x1000>;
 167                                 interrupt-parent = <&vic1>;
 168                                 interrupts = <4>;
 169                         };
 170
 171                         i2c@d0200000 {
 172                                 #address-cells = <1>;
 173                                 #size-cells = <0>;
 174                                 compatible = "snps,designware-i2c";
 175                                 reg = <0xd0200000 0x1000>;
 176                                 interrupt-parent = <&vic0>;
 177                                 interrupts = <28>;
 178                                 status = "disabled";
 179                         };
 180
 181                         timer@f0000000 {
 182                                 compatible = "st,spear-timer";
 183                                 reg = <0xf0000000 0x400>;
 184                                 interrupts = <16>;
 185                         };
 186                 };
 187         };
 188 };