arch/arm/boot/dts/spear1340.dtsi

   1 /*
   2  * DTS file for all SPEAr1340 SoCs
   3  *
   4  * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
   5  *
   6  * The code contained herein is licensed under the GNU General Public
   7  * License. You may obtain a copy of the GNU General Public License
   8  * Version 2 or later at the following locations:
   9  *
  10  * http://www.opensource.org/licenses/gpl-license.html
  11  * http://www.gnu.org/copyleft/gpl.html
  12  */
  13
  14 /include/ "spear13xx.dtsi"
  15
  16 / {
  17         compatible = "st,spear1340";
  18
  19         ahb {
  20
  21                 spics: spics@e0700000{
  22                         compatible = "st,spear-spics-gpio";
  23                         reg = <0xe0700000 0x1000>;
  24                         st-spics,peripcfg-reg = <0x42c>;
  25                         st-spics,sw-enable-bit = <21>;
  26                         st-spics,cs-value-bit = <20>;
  27                         st-spics,cs-enable-mask = <3>;
  28                         st-spics,cs-enable-shift = <18>;
  29                         gpio-controller;
  30                         #gpio-cells = <2>;
  31                         status = "disabled";
  32                 };
  33
  34                 miphy0: miphy@eb800000 {
  35                         compatible = "st,spear1340-miphy";
  36                         reg = <0xeb800000 0x4000>;
  37                         misc = <&misc>;
  38                         #phy-cells = <1>;
  39                         status = "disabled";
  40                 };
  41
  42                 ahci0: ahci@b1000000 {
  43                         compatible = "snps,spear-ahci";
  44                         reg = <0xb1000000 0x10000>;
  45                         interrupts = <0 72 0x4>;
  46                         phys = <&miphy0 0>;
  47                         phy-names = "sata-phy";
  48                         status = "disabled";
  49                 };
  50
  51                 pcie0: pcie@b1000000 {
  52                         compatible = "st,spear1340-pcie", "snps,dw-pcie";
  53                         reg = <0xb1000000 0x4000>, <0x80000000 0x20000>;
  54                         reg-names = "dbi", "config";
  55                         interrupts = <0 68 0x4>;
  56                         interrupt-map-mask = <0 0 0 0>;
  57                         interrupt-map = <0x0 0 &gic 0 68 0x4>;
  58                         num-lanes = <1>;
  59                         phys = <&miphy0 1>;
  60                         phy-names = "pcie-phy";
  61                         #address-cells = <3>;
  62                         #size-cells = <2>;
  63                         device_type = "pci";
  64                         ranges = <0x81000000 0 0         0x80020000 0 0x00010000   /* downstream I/O */
  65                                 0x82000000 0 0x80030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */
  66                         bus-range = <0x00 0xff>;
  67                         status = "disabled";
  68                 };
  69
  70                 i2s-play@b2400000 {
  71                         compatible = "snps,designware-i2s";
  72                         reg = <0xb2400000 0x10000>;
  73                         interrupt-names = "play_irq";
  74                         interrupts = <0 98 0x4
  75                                       0 99 0x4>;
  76                         play;
  77                         channel = <8>;
  78                         status = "disabled";
  79                 };
  80
  81                 i2s-rec@b2000000 {
  82                         compatible = "snps,designware-i2s";
  83                         reg = <0xb2000000 0x10000>;
  84                         interrupt-names = "record_irq";
  85                         interrupts = <0 100  0x4
  86                                       0 101 0x4>;
  87                         record;
  88                         channel = <8>;
  89                         status = "disabled";
  90                 };
  91
  92                 pinmux: pinmux@e0700000 {
  93                         compatible = "st,spear1340-pinmux";
  94                         reg = <0xe0700000 0x1000>;
  95                         #gpio-range-cells = <3>;
  96                 };
  97
  98                 pwm: pwm@e0180000 {
  99                         compatible ="st,spear13xx-pwm";
 100                         reg = <0xe0180000 0x1000>;
 101                         #pwm-cells = <2>;
 102                         status = "disabled";
 103                 };
 104
 105                 spdif-in@d0100000 {
 106                         compatible = "st,spdif-in";
 107                         reg = < 0xd0100000 0x20000
 108                                 0xd0110000 0x10000 >;
 109                         interrupts = <0 84 0x4>;
 110                         status = "disabled";
 111                 };
 112
 113                 spdif-out@d0000000 {
 114                         compatible = "st,spdif-out";
 115                         reg = <0xd0000000 0x20000>;
 116                         interrupts = <0 85 0x4>;
 117                         status = "disabled";
 118                 };
 119
 120                 spi1: spi@5d400000 {
 121                         compatible = "arm,pl022", "arm,primecell";
 122                         reg = <0x5d400000 0x1000>;
 123                         #address-cells = <1>;
 124                         #size-cells = <0>;
 125                         interrupts = <0 99 0x4>;
 126                         status = "disabled";
 127                 };
 128
 129                 apb {
 130                         i2c1: i2c@b4000000 {
 131                                 #address-cells = <1>;
 132                                 #size-cells = <0>;
 133                                 compatible = "snps,designware-i2c";
 134                                 reg = <0xb4000000 0x1000>;
 135                                 interrupts = <0 104 0x4>;
 136                                 write-16bit;
 137                                 status = "disabled";
 138                         };
 139
 140                         serial@b4100000 {
 141                                 compatible = "arm,pl011", "arm,primecell";
 142                                 reg = <0xb4100000 0x1000>;
 143                                 interrupts = <0 105 0x4>;
 144                                 status = "disabled";
 145                                 dmas = <&dwdma0 12 0 1>,
 146                                         <&dwdma0 13 1 0>;
 147                                 dma-names = "tx", "rx";
 148                         };
 149
 150                         thermal@e07008c4 {
 151                                 st,thermal-flags = <0x2a00>;
 152                         };
 153
 154                         gpiopinctrl: gpio@e2800000 {
 155                                 compatible = "st,spear-plgpio";
 156                                 reg = <0xe2800000 0x1000>;
 157                                 interrupts = <0 107 0x4>;
 158                                 #interrupt-cells = <1>;
 159                                 interrupt-controller;
 160                                 gpio-controller;
 161                                 #gpio-cells = <2>;
 162                                 gpio-ranges = <&pinmux 0 0 252>;
 163                                 status = "disabled";
 164
 165                                 st-plgpio,ngpio = <250>;
 166                                 st-plgpio,wdata-reg = <0x40>;
 167                                 st-plgpio,dir-reg = <0x00>;
 168                                 st-plgpio,ie-reg = <0x80>;
 169                                 st-plgpio,rdata-reg = <0x20>;
 170                                 st-plgpio,mis-reg = <0xa0>;
 171                                 st-plgpio,eit-reg = <0x60>;
 172                         };
 173                 };
 174         };
 175 };