arch/arm/boot/dts/rk3xxx.dtsi

   1 /*
   2  * Copyright (c) 2013 MundoReader S.L.
   3  * Author: Heiko Stuebner <heiko@sntech.de>
   4  *
   5  * This file is dual-licensed: you can use it either under the terms
   6  * of the GPL or the X11 license, at your option. Note that this dual
   7  * licensing only applies to this file, and not this project as a
   8  * whole.
   9  *
  10  *  a) This file is free software; you can redistribute it and/or
  11  *     modify it under the terms of the GNU General Public License as
  12  *     published by the Free Software Foundation; either version 2 of the
  13  *     License, or (at your option) any later version.
  14  *
  15  *     This file is distributed in the hope that it will be useful,
  16  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18  *     GNU General Public License for more details.
  19  *
  20  * Or, alternatively,
  21  *
  22  *  b) Permission is hereby granted, free of charge, to any person
  23  *     obtaining a copy of this software and associated documentation
  24  *     files (the "Software"), to deal in the Software without
  25  *     restriction, including without limitation the rights to use,
  26  *     copy, modify, merge, publish, distribute, sublicense, and/or
  27  *     sell copies of the Software, and to permit persons to whom the
  28  *     Software is furnished to do so, subject to the following
  29  *     conditions:
  30  *
  31  *     The above copyright notice and this permission notice shall be
  32  *     included in all copies or substantial portions of the Software.
  33  *
  34  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  35  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  36  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  37  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  38  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  39  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  40  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  41  *     OTHER DEALINGS IN THE SOFTWARE.
  42  */
  43
  44 #include <dt-bindings/interrupt-controller/irq.h>
  45 #include <dt-bindings/interrupt-controller/arm-gic.h>
  46 #include <dt-bindings/soc/rockchip,boot-mode.h>
  47
  48 / {
  49         #address-cells = <1>;
  50         #size-cells = <1>;
  51
  52         interrupt-parent = <&gic>;
  53
  54         aliases {
  55                 ethernet0 = &emac;
  56                 i2c0 = &i2c0;
  57                 i2c1 = &i2c1;
  58                 i2c2 = &i2c2;
  59                 i2c3 = &i2c3;
  60                 i2c4 = &i2c4;
  61                 mshc0 = &emmc;
  62                 mshc1 = &mmc0;
  63                 mshc2 = &mmc1;
  64                 serial0 = &uart0;
  65                 serial1 = &uart1;
  66                 serial2 = &uart2;
  67                 serial3 = &uart3;
  68                 spi0 = &spi0;
  69                 spi1 = &spi1;
  70         };
  71
  72         amba {
  73                 compatible = "simple-bus";
  74                 #address-cells = <1>;
  75                 #size-cells = <1>;
  76                 ranges;
  77
  78                 dmac1_s: dma-controller@20018000 {
  79                         compatible = "arm,pl330", "arm,primecell";
  80                         reg = <0x20018000 0x4000>;
  81                         interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
  82                                      <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
  83                         #dma-cells = <1>;
  84                         arm,pl330-broken-no-flushp;
  85                         clocks = <&cru ACLK_DMA1>;
  86                         clock-names = "apb_pclk";
  87                 };
  88
  89                 dmac1_ns: dma-controller@2001c000 {
  90                         compatible = "arm,pl330", "arm,primecell";
  91                         reg = <0x2001c000 0x4000>;
  92                         interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
  93                                      <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
  94                         #dma-cells = <1>;
  95                         arm,pl330-broken-no-flushp;
  96                         clocks = <&cru ACLK_DMA1>;
  97                         clock-names = "apb_pclk";
  98                         status = "disabled";
  99                 };
 100
 101                 dmac2: dma-controller@20078000 {
 102                         compatible = "arm,pl330", "arm,primecell";
 103                         reg = <0x20078000 0x4000>;
 104                         interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
 105                                      <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 106                         #dma-cells = <1>;
 107                         arm,pl330-broken-no-flushp;
 108                         clocks = <&cru ACLK_DMA2>;
 109                         clock-names = "apb_pclk";
 110                 };
 111         };
 112
 113         xin24m: oscillator {
 114                 compatible = "fixed-clock";
 115                 clock-frequency = <24000000>;
 116                 #clock-cells = <0>;
 117                 clock-output-names = "xin24m";
 118         };
 119
 120         L2: l2-cache-controller@10138000 {
 121                 compatible = "arm,pl310-cache";
 122                 reg = <0x10138000 0x1000>;
 123                 cache-unified;
 124                 cache-level = <2>;
 125         };
 126
 127         scu@1013c000 {
 128                 compatible = "arm,cortex-a9-scu";
 129                 reg = <0x1013c000 0x100>;
 130         };
 131
 132         global_timer: global-timer@1013c200 {
 133                 compatible = "arm,cortex-a9-global-timer";
 134                 reg = <0x1013c200 0x20>;
 135                 interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
 136                 clocks = <&cru CORE_PERI>;
 137         };
 138
 139         local_timer: local-timer@1013c600 {
 140                 compatible = "arm,cortex-a9-twd-timer";
 141                 reg = <0x1013c600 0x20>;
 142                 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
 143                 clocks = <&cru CORE_PERI>;
 144         };
 145
 146         gic: interrupt-controller@1013d000 {
 147                 compatible = "arm,cortex-a9-gic";
 148                 interrupt-controller;
 149                 #interrupt-cells = <3>;
 150                 reg = <0x1013d000 0x1000>,
 151                       <0x1013c100 0x0100>;
 152         };
 153
 154         uart0: serial@10124000 {
 155                 compatible = "snps,dw-apb-uart";
 156                 reg = <0x10124000 0x400>;
 157                 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 158                 reg-shift = <2>;
 159                 reg-io-width = <1>;
 160                 clock-names = "baudclk", "apb_pclk";
 161                 clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
 162                 status = "disabled";
 163         };
 164
 165         uart1: serial@10126000 {
 166                 compatible = "snps,dw-apb-uart";
 167                 reg = <0x10126000 0x400>;
 168                 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 169                 reg-shift = <2>;
 170                 reg-io-width = <1>;
 171                 clock-names = "baudclk", "apb_pclk";
 172                 clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
 173                 status = "disabled";
 174         };
 175
 176         usb_otg: usb@10180000 {
 177                 compatible = "rockchip,rk3066-usb", "snps,dwc2";
 178                 reg = <0x10180000 0x40000>;
 179                 interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 180                 clocks = <&cru HCLK_OTG0>;
 181                 clock-names = "otg";
 182                 dr_mode = "otg";
 183                 g-np-tx-fifo-size = <16>;
 184                 g-rx-fifo-size = <275>;
 185                 g-tx-fifo-size = <256 128 128 64 64 32>;
 186                 phys = <&usbphy0>;
 187                 phy-names = "usb2-phy";
 188                 status = "disabled";
 189         };
 190
 191         usb_host: usb@101c0000 {
 192                 compatible = "snps,dwc2";
 193                 reg = <0x101c0000 0x40000>;
 194                 interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 195                 clocks = <&cru HCLK_OTG1>;
 196                 clock-names = "otg";
 197                 dr_mode = "host";
 198                 phys = <&usbphy1>;
 199                 phy-names = "usb2-phy";
 200                 status = "disabled";
 201         };
 202
 203         emac: ethernet@10204000 {
 204                 compatible = "snps,arc-emac";
 205                 reg = <0x10204000 0x3c>;
 206                 interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 207                 #address-cells = <1>;
 208                 #size-cells = <0>;
 209
 210                 rockchip,grf = <&grf>;
 211
 212                 clocks = <&cru HCLK_EMAC>, <&cru SCLK_MAC>;
 213                 clock-names = "hclk", "macref";
 214                 max-speed = <100>;
 215                 phy-mode = "rmii";
 216
 217                 status = "disabled";
 218         };
 219
 220         mmc0: dwmmc@10214000 {
 221                 compatible = "rockchip,rk2928-dw-mshc";
 222                 reg = <0x10214000 0x1000>;
 223                 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 224                 clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
 225                 clock-names = "biu", "ciu";
 226                 dmas = <&dmac2 1>;
 227                 dma-names = "rx-tx";
 228                 fifo-depth = <256>;
 229                 resets = <&cru SRST_SDMMC>;
 230                 reset-names = "reset";
 231                 status = "disabled";
 232         };
 233
 234         mmc1: dwmmc@10218000 {
 235                 compatible = "rockchip,rk2928-dw-mshc";
 236                 reg = <0x10218000 0x1000>;
 237                 interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 238                 clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>;
 239                 clock-names = "biu", "ciu";
 240                 dmas = <&dmac2 3>;
 241                 dma-names = "rx-tx";
 242                 fifo-depth = <256>;
 243                 resets = <&cru SRST_SDIO>;
 244                 reset-names = "reset";
 245                 status = "disabled";
 246         };
 247
 248         emmc: dwmmc@1021c000 {
 249                 compatible = "rockchip,rk2928-dw-mshc";
 250                 reg = <0x1021c000 0x1000>;
 251                 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 252                 clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>;
 253                 clock-names = "biu", "ciu";
 254                 dmas = <&dmac2 4>;
 255                 dma-names = "rx-tx";
 256                 fifo-depth = <256>;
 257                 resets = <&cru SRST_EMMC>;
 258                 reset-names = "reset";
 259                 status = "disabled";
 260         };
 261
 262         pmu: pmu@20004000 {
 263                 compatible = "rockchip,rk3066-pmu", "syscon", "simple-mfd";
 264                 reg = <0x20004000 0x100>;
 265
 266                 reboot-mode {
 267                         compatible = "syscon-reboot-mode";
 268                         offset = <0x40>;
 269                         mode-normal = <BOOT_NORMAL>;
 270                         mode-recovery = <BOOT_RECOVERY>;
 271                         mode-bootloader = <BOOT_FASTBOOT>;
 272                         mode-loader = <BOOT_BL_DOWNLOAD>;
 273                 };
 274         };
 275
 276         grf: grf@20008000 {
 277                 compatible = "syscon";
 278                 reg = <0x20008000 0x200>;
 279         };
 280
 281         i2c0: i2c@2002d000 {
 282                 compatible = "rockchip,rk3066-i2c";
 283                 reg = <0x2002d000 0x1000>;
 284                 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 285                 #address-cells = <1>;
 286                 #size-cells = <0>;
 287
 288                 rockchip,grf = <&grf>;
 289
 290                 clock-names = "i2c";
 291                 clocks = <&cru PCLK_I2C0>;
 292
 293                 status = "disabled";
 294         };
 295
 296         i2c1: i2c@2002f000 {
 297                 compatible = "rockchip,rk3066-i2c";
 298                 reg = <0x2002f000 0x1000>;
 299                 interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 300                 #address-cells = <1>;
 301                 #size-cells = <0>;
 302
 303                 rockchip,grf = <&grf>;
 304
 305                 clocks = <&cru PCLK_I2C1>;
 306                 clock-names = "i2c";
 307
 308                 status = "disabled";
 309         };
 310
 311         pwm0: pwm@20030000 {
 312                 compatible = "rockchip,rk2928-pwm";
 313                 reg = <0x20030000 0x10>;
 314                 #pwm-cells = <2>;
 315                 clocks = <&cru PCLK_PWM01>;
 316                 status = "disabled";
 317         };
 318
 319         pwm1: pwm@20030010 {
 320                 compatible = "rockchip,rk2928-pwm";
 321                 reg = <0x20030010 0x10>;
 322                 #pwm-cells = <2>;
 323                 clocks = <&cru PCLK_PWM01>;
 324                 status = "disabled";
 325         };
 326
 327         wdt: watchdog@2004c000 {
 328                 compatible = "snps,dw-wdt";
 329                 reg = <0x2004c000 0x100>;
 330                 clocks = <&cru PCLK_WDT>;
 331                 interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
 332                 status = "disabled";
 333         };
 334
 335         pwm2: pwm@20050020 {
 336                 compatible = "rockchip,rk2928-pwm";
 337                 reg = <0x20050020 0x10>;
 338                 #pwm-cells = <2>;
 339                 clocks = <&cru PCLK_PWM23>;
 340                 status = "disabled";
 341         };
 342
 343         pwm3: pwm@20050030 {
 344                 compatible = "rockchip,rk2928-pwm";
 345                 reg = <0x20050030 0x10>;
 346                 #pwm-cells = <2>;
 347                 clocks = <&cru PCLK_PWM23>;
 348                 status = "disabled";
 349         };
 350
 351         i2c2: i2c@20056000 {
 352                 compatible = "rockchip,rk3066-i2c";
 353                 reg = <0x20056000 0x1000>;
 354                 interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 355                 #address-cells = <1>;
 356                 #size-cells = <0>;
 357
 358                 rockchip,grf = <&grf>;
 359
 360                 clocks = <&cru PCLK_I2C2>;
 361                 clock-names = "i2c";
 362
 363                 status = "disabled";
 364         };
 365
 366         i2c3: i2c@2005a000 {
 367                 compatible = "rockchip,rk3066-i2c";
 368                 reg = <0x2005a000 0x1000>;
 369                 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 370                 #address-cells = <1>;
 371                 #size-cells = <0>;
 372
 373                 rockchip,grf = <&grf>;
 374
 375                 clocks = <&cru PCLK_I2C3>;
 376                 clock-names = "i2c";
 377
 378                 status = "disabled";
 379         };
 380
 381         i2c4: i2c@2005e000 {
 382                 compatible = "rockchip,rk3066-i2c";
 383                 reg = <0x2005e000 0x1000>;
 384                 interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 385                 #address-cells = <1>;
 386                 #size-cells = <0>;
 387
 388                 rockchip,grf = <&grf>;
 389
 390                 clocks = <&cru PCLK_I2C4>;
 391                 clock-names = "i2c";
 392
 393                 status = "disabled";
 394         };
 395
 396         uart2: serial@20064000 {
 397                 compatible = "snps,dw-apb-uart";
 398                 reg = <0x20064000 0x400>;
 399                 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 400                 reg-shift = <2>;
 401                 reg-io-width = <1>;
 402                 clock-names = "baudclk", "apb_pclk";
 403                 clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
 404                 status = "disabled";
 405         };
 406
 407         uart3: serial@20068000 {
 408                 compatible = "snps,dw-apb-uart";
 409                 reg = <0x20068000 0x400>;
 410                 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 411                 reg-shift = <2>;
 412                 reg-io-width = <1>;
 413                 clock-names = "baudclk", "apb_pclk";
 414                 clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
 415                 status = "disabled";
 416         };
 417
 418         saradc: saradc@2006c000 {
 419                 compatible = "rockchip,saradc";
 420                 reg = <0x2006c000 0x100>;
 421                 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 422                 #io-channel-cells = <1>;
 423                 clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
 424                 clock-names = "saradc", "apb_pclk";
 425                 resets = <&cru SRST_SARADC>;
 426                 reset-names = "saradc-apb";
 427                 status = "disabled";
 428         };
 429
 430         spi0: spi@20070000 {
 431                 compatible = "rockchip,rk3066-spi";
 432                 clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
 433                 clock-names = "spiclk", "apb_pclk";
 434                 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 435                 reg = <0x20070000 0x1000>;
 436                 #address-cells = <1>;
 437                 #size-cells = <0>;
 438                 dmas = <&dmac2 10>, <&dmac2 11>;
 439                 dma-names = "tx", "rx";
 440                 status = "disabled";
 441         };
 442
 443         spi1: spi@20074000 {
 444                 compatible = "rockchip,rk3066-spi";
 445                 clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
 446                 clock-names = "spiclk", "apb_pclk";
 447                 interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 448                 reg = <0x20074000 0x1000>;
 449                 #address-cells = <1>;
 450                 #size-cells = <0>;
 451                 dmas = <&dmac2 12>, <&dmac2 13>;
 452                 dma-names = "tx", "rx";
 453                 status = "disabled";
 454         };
 455 };