arch/arm/boot/dts/rk3036.dtsi

   1 /*
   2  * This file is dual-licensed: you can use it either under the terms
   3  * of the GPL or the X11 license, at your option. Note that this dual
   4  * licensing only applies to this file, and not this project as a
   5  * whole.
   6  *
   7  *  a) This file is free software; you can redistribute it and/or
   8  *     modify it under the terms of the GNU General Public License as
   9  *     published by the Free Software Foundation; either version 2 of the
  10  *     License, or (at your option) any later version.
  11  *
  12  *     This file is distributed in the hope that it will be useful,
  13  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  *     GNU General Public License for more details.
  16  *
  17  * Or, alternatively,
  18  *
  19  *  b) Permission is hereby granted, free of charge, to any person
  20  *     obtaining a copy of this software and associated documentation
  21  *     files (the "Software"), to deal in the Software without
  22  *     restriction, including without limitation the rights to use,
  23  *     copy, modify, merge, publish, distribute, sublicense, and/or
  24  *     sell copies of the Software, and to permit persons to whom the
  25  *     Software is furnished to do so, subject to the following
  26  *     conditions:
  27  *
  28  *     The above copyright notice and this permission notice shall be
  29  *     included in all copies or substantial portions of the Software.
  30  *
  31  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  32  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  33  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  34  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  35  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  36  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  37  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  38  *     OTHER DEALINGS IN THE SOFTWARE.
  39  */
  40
  41 #include <dt-bindings/gpio/gpio.h>
  42 #include <dt-bindings/interrupt-controller/irq.h>
  43 #include <dt-bindings/interrupt-controller/arm-gic.h>
  44 #include <dt-bindings/pinctrl/rockchip.h>
  45 #include <dt-bindings/clock/rk3036-cru.h>
  46 #include <dt-bindings/soc/rockchip,boot-mode.h>
  47
  48 / {
  49         #address-cells = <1>;
  50         #size-cells = <1>;
  51
  52         compatible = "rockchip,rk3036";
  53
  54         interrupt-parent = <&gic>;
  55
  56         aliases {
  57                 i2c0 = &i2c0;
  58                 i2c1 = &i2c1;
  59                 i2c2 = &i2c2;
  60                 mshc0 = &emmc;
  61                 mshc1 = &sdmmc;
  62                 mshc2 = &sdio;
  63                 serial0 = &uart0;
  64                 serial1 = &uart1;
  65                 serial2 = &uart2;
  66                 spi = &spi;
  67         };
  68
  69         cpus {
  70                 #address-cells = <1>;
  71                 #size-cells = <0>;
  72                 enable-method = "rockchip,rk3036-smp";
  73
  74                 cpu0: cpu@f00 {
  75                         device_type = "cpu";
  76                         compatible = "arm,cortex-a7";
  77                         reg = <0xf00>;
  78                         resets = <&cru SRST_CORE0>;
  79                         operating-points = <
  80                                 /* KHz    uV */
  81                                  816000 1000000
  82                         >;
  83                         clock-latency = <40000>;
  84                         clocks = <&cru ARMCLK>;
  85                 };
  86
  87                 cpu1: cpu@f01 {
  88                         device_type = "cpu";
  89                         compatible = "arm,cortex-a7";
  90                         reg = <0xf01>;
  91                         resets = <&cru SRST_CORE1>;
  92                 };
  93         };
  94
  95         amba {
  96                 compatible = "simple-bus";
  97                 #address-cells = <1>;
  98                 #size-cells = <1>;
  99                 ranges;
 100
 101                 pdma: pdma@20078000 {
 102                         compatible = "arm,pl330", "arm,primecell";
 103                         reg = <0x20078000 0x4000>;
 104                         interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
 105                                      <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 106                         #dma-cells = <1>;
 107                         arm,pl330-broken-no-flushp;
 108                         clocks = <&cru ACLK_DMAC2>;
 109                         clock-names = "apb_pclk";
 110                 };
 111         };
 112
 113         arm-pmu {
 114                 compatible = "arm,cortex-a7-pmu";
 115                 interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
 116                              <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 117                 interrupt-affinity = <&cpu0>, <&cpu1>;
 118         };
 119
 120         display-subsystem {
 121                 compatible = "rockchip,display-subsystem";
 122                 ports = <&vop_out>;
 123         };
 124
 125         timer {
 126                 compatible = "arm,armv7-timer";
 127                 arm,cpu-registers-not-fw-configured;
 128                 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
 129                              <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
 130                              <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
 131                              <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
 132                 clock-frequency = <24000000>;
 133         };
 134
 135         xin24m: oscillator {
 136                 compatible = "fixed-clock";
 137                 clock-frequency = <24000000>;
 138                 clock-output-names = "xin24m";
 139                 #clock-cells = <0>;
 140         };
 141
 142         bus_intmem@10080000 {
 143                 compatible = "mmio-sram";
 144                 reg = <0x10080000 0x2000>;
 145                 #address-cells = <1>;
 146                 #size-cells = <1>;
 147                 ranges = <0 0x10080000 0x2000>;
 148
 149                 smp-sram@0 {
 150                         compatible = "rockchip,rk3066-smp-sram";
 151                         reg = <0x00 0x10>;
 152                 };
 153         };
 154
 155         vop: vop@10118000 {
 156                 compatible = "rockchip,rk3036-vop";
 157                 reg = <0x10118000 0x19c>;
 158                 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 159                 clocks = <&cru ACLK_LCDC>, <&cru SCLK_LCDC>, <&cru HCLK_LCDC>;
 160                 clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
 161                 resets = <&cru SRST_LCDC1_A>, <&cru SRST_LCDC1_H>, <&cru SRST_LCDC1_D>;
 162                 reset-names = "axi", "ahb", "dclk";
 163                 iommus = <&vop_mmu>;
 164                 status = "disabled";
 165
 166                 vop_out: port {
 167                         #address-cells = <1>;
 168                         #size-cells = <0>;
 169                         vop_out_hdmi: endpoint@0 {
 170                                 reg = <0>;
 171                                 remote-endpoint = <&hdmi_in_vop>;
 172                         };
 173                 };
 174         };
 175
 176         vop_mmu: iommu@10118300 {
 177                 compatible = "rockchip,iommu";
 178                 reg = <0x10118300 0x100>;
 179                 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 180                 interrupt-names = "vop_mmu";
 181                 #iommu-cells = <0>;
 182                 status = "disabled";
 183         };
 184
 185         gic: interrupt-controller@10139000 {
 186                 compatible = "arm,gic-400";
 187                 interrupt-controller;
 188                 #interrupt-cells = <3>;
 189                 #address-cells = <0>;
 190
 191                 reg = <0x10139000 0x1000>,
 192                       <0x1013a000 0x2000>,
 193                       <0x1013c000 0x2000>,
 194                       <0x1013e000 0x2000>;
 195                 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
 196         };
 197
 198         usb_otg: usb@10180000 {
 199                 compatible = "rockchip,rk3036-usb", "rockchip,rk3066-usb",
 200                                 "snps,dwc2";
 201                 reg = <0x10180000 0x40000>;
 202                 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 203                 clocks = <&cru HCLK_OTG0>;
 204                 clock-names = "otg";
 205                 dr_mode = "otg";
 206                 g-np-tx-fifo-size = <16>;
 207                 g-rx-fifo-size = <275>;
 208                 g-tx-fifo-size = <256 128 128 64 64 32>;
 209                 status = "disabled";
 210         };
 211
 212         usb_host: usb@101c0000 {
 213                 compatible = "rockchip,rk3036-usb", "rockchip,rk3066-usb",
 214                                 "snps,dwc2";
 215                 reg = <0x101c0000 0x40000>;
 216                 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 217                 clocks = <&cru HCLK_OTG1>;
 218                 clock-names = "otg";
 219                 dr_mode = "host";
 220                 status = "disabled";
 221         };
 222
 223         emac: ethernet@10200000 {
 224                 compatible = "rockchip,rk3036-emac", "snps,arc-emac";
 225                 reg = <0x10200000 0x4000>;
 226                 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 227                 #address-cells = <1>;
 228                 #size-cells = <0>;
 229                 rockchip,grf = <&grf>;
 230                 clocks = <&cru HCLK_MAC>, <&cru SCLK_MACREF>, <&cru SCLK_MAC>;
 231                 clock-names = "hclk", "macref", "macclk";
 232                 /*
 233                  * Fix the emac parent clock is DPLL instead of APLL.
 234                  * since that will cause some unstable things if the cpufreq
 235                  * is working. (e.g: the accurate 50MHz what mac_ref need)
 236                  */
 237                 assigned-clocks = <&cru SCLK_MACPLL>;
 238                 assigned-clock-parents = <&cru PLL_DPLL>;
 239                 max-speed = <100>;
 240                 phy-mode = "rmii";
 241                 status = "disabled";
 242         };
 243
 244         sdmmc: dwmmc@10214000 {
 245                 compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
 246                 reg = <0x10214000 0x4000>;
 247                 clock-frequency = <37500000>;
 248                 max-frequency = <37500000>;
 249                 clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
 250                 clock-names = "biu", "ciu";
 251                 fifo-depth = <0x100>;
 252                 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 253                 status = "disabled";
 254         };
 255
 256         sdio: dwmmc@10218000 {
 257                 compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
 258                 reg = <0x10218000 0x4000>;
 259                 max-frequency = <37500000>;
 260                 clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
 261                          <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
 262                 clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
 263                 fifo-depth = <0x100>;
 264                 interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 265                 status = "disabled";
 266         };
 267
 268         emmc: dwmmc@1021c000 {
 269                 compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
 270                 reg = <0x1021c000 0x4000>;
 271                 interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 272                 bus-width = <8>;
 273                 cap-mmc-highspeed;
 274                 clock-frequency = <37500000>;
 275                 max-frequency = <37500000>;
 276                 clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
 277                          <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
 278                 clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
 279                 default-sample-phase = <158>;
 280                 disable-wp;
 281                 dmas = <&pdma 12>;
 282                 dma-names = "rx-tx";
 283                 fifo-depth = <0x100>;
 284                 mmc-ddr-1_8v;
 285                 non-removable;
 286                 num-slots = <1>;
 287                 pinctrl-names = "default";
 288                 pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
 289                 status = "disabled";
 290         };
 291
 292         i2s: i2s@10220000 {
 293                 compatible = "rockchip,rk3036-i2s", "rockchip,rk3066-i2s";
 294                 reg = <0x10220000 0x4000>;
 295                 interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
 296                 #address-cells = <1>;
 297                 #size-cells = <0>;
 298                 clock-names = "i2s_clk", "i2s_hclk";
 299                 clocks = <&cru SCLK_I2S>, <&cru HCLK_I2S>;
 300                 dmas = <&pdma 0>, <&pdma 1>;
 301                 dma-names = "tx", "rx";
 302                 pinctrl-names = "default";
 303                 pinctrl-0 = <&i2s_bus>;
 304                 status = "disabled";
 305         };
 306
 307         cru: clock-controller@20000000 {
 308                 compatible = "rockchip,rk3036-cru";
 309                 reg = <0x20000000 0x1000>;
 310                 rockchip,grf = <&grf>;
 311                 #clock-cells = <1>;
 312                 #reset-cells = <1>;
 313                 assigned-clocks = <&cru PLL_GPLL>;
 314                 assigned-clock-rates = <594000000>;
 315         };
 316
 317         grf: syscon@20008000 {
 318                 compatible = "rockchip,rk3036-grf", "syscon", "simple-mfd";
 319                 reg = <0x20008000 0x1000>;
 320
 321                 reboot-mode {
 322                         compatible = "syscon-reboot-mode";
 323                         offset = <0x1d8>;
 324                         mode-normal = <BOOT_NORMAL>;
 325                         mode-recovery = <BOOT_RECOVERY>;
 326                         mode-bootloader = <BOOT_FASTBOOT>;
 327                         mode-loader = <BOOT_BL_DOWNLOAD>;
 328                 };
 329         };
 330
 331         acodec: acodec-ana@20030000 {
 332                 compatible = "rk3036-codec";
 333                 reg = <0x20030000 0x4000>;
 334                 rockchip,grf = <&grf>;
 335                 clock-names = "acodec_pclk";
 336                 clocks = <&cru PCLK_ACODEC>;
 337                 status = "disabled";
 338         };
 339
 340         hdmi: hdmi@20034000 {
 341                 compatible = "rockchip,rk3036-inno-hdmi";
 342                 reg = <0x20034000 0x4000>;
 343                 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 344                 clocks = <&cru  PCLK_HDMI>;
 345                 clock-names = "pclk";
 346                 rockchip,grf = <&grf>;
 347                 pinctrl-names = "default";
 348                 pinctrl-0 = <&hdmi_ctl>;
 349                 status = "disabled";
 350
 351                 hdmi_in: port {
 352                         #address-cells = <1>;
 353                         #size-cells = <0>;
 354                         hdmi_in_vop: endpoint@0 {
 355                                 reg = <0>;
 356                                 remote-endpoint = <&vop_out_hdmi>;
 357                         };
 358                 };
 359         };
 360
 361         timer: timer@20044000 {
 362                 compatible = "rockchip,rk3036-timer", "rockchip,rk3288-timer";
 363                 reg = <0x20044000 0x20>;
 364                 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 365                 clocks = <&xin24m>, <&cru PCLK_TIMER>;
 366                 clock-names = "timer", "pclk";
 367         };
 368
 369         pwm0: pwm@20050000 {
 370                 compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
 371                 reg = <0x20050000 0x10>;
 372                 #pwm-cells = <3>;
 373                 clocks = <&cru PCLK_PWM>;
 374                 clock-names = "pwm";
 375                 pinctrl-names = "default";
 376                 pinctrl-0 = <&pwm0_pin>;
 377                 status = "disabled";
 378         };
 379
 380         pwm1: pwm@20050010 {
 381                 compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
 382                 reg = <0x20050010 0x10>;
 383                 #pwm-cells = <3>;
 384                 clocks = <&cru PCLK_PWM>;
 385                 clock-names = "pwm";
 386                 pinctrl-names = "default";
 387                 pinctrl-0 = <&pwm1_pin>;
 388                 status = "disabled";
 389         };
 390
 391         pwm2: pwm@20050020 {
 392                 compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
 393                 reg = <0x20050020 0x10>;
 394                 #pwm-cells = <3>;
 395                 clocks = <&cru PCLK_PWM>;
 396                 clock-names = "pwm";
 397                 pinctrl-names = "default";
 398                 pinctrl-0 = <&pwm2_pin>;
 399                 status = "disabled";
 400         };
 401
 402         pwm3: pwm@20050030 {
 403                 compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
 404                 reg = <0x20050030 0x10>;
 405                 #pwm-cells = <2>;
 406                 clocks = <&cru PCLK_PWM>;
 407                 clock-names = "pwm";
 408                 pinctrl-names = "default";
 409                 pinctrl-0 = <&pwm3_pin>;
 410                 status = "disabled";
 411         };
 412
 413         i2c1: i2c@20056000 {
 414                 compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c";
 415                 reg = <0x20056000 0x1000>;
 416                 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 417                 #address-cells = <1>;
 418                 #size-cells = <0>;
 419                 clock-names = "i2c";
 420                 clocks = <&cru PCLK_I2C1>;
 421                 pinctrl-names = "default";
 422                 pinctrl-0 = <&i2c1_xfer>;
 423                 status = "disabled";
 424         };
 425
 426         i2c2: i2c@2005a000 {
 427                 compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c";
 428                 reg = <0x2005a000 0x1000>;
 429                 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 430                 #address-cells = <1>;
 431                 #size-cells = <0>;
 432                 clock-names = "i2c";
 433                 clocks = <&cru PCLK_I2C2>;
 434                 pinctrl-names = "default";
 435                 pinctrl-0 = <&i2c2_xfer>;
 436                 status = "disabled";
 437         };
 438
 439         uart0: serial@20060000 {
 440                 compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
 441                 reg = <0x20060000 0x100>;
 442                 interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 443                 reg-shift = <2>;
 444                 reg-io-width = <4>;
 445                 clock-frequency = <24000000>;
 446                 clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
 447                 clock-names = "baudclk", "apb_pclk";
 448                 pinctrl-names = "default";
 449                 pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
 450                 status = "disabled";
 451         };
 452
 453         uart1: serial@20064000 {
 454                 compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
 455                 reg = <0x20064000 0x100>;
 456                 interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 457                 reg-shift = <2>;
 458                 reg-io-width = <4>;
 459                 clock-frequency = <24000000>;
 460                 clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
 461                 clock-names = "baudclk", "apb_pclk";
 462                 pinctrl-names = "default";
 463                 pinctrl-0 = <&uart1_xfer>;
 464                 status = "disabled";
 465         };
 466
 467         uart2: serial@20068000 {
 468                 compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
 469                 reg = <0x20068000 0x100>;
 470                 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
 471                 reg-shift = <2>;
 472                 reg-io-width = <4>;
 473                 clock-frequency = <24000000>;
 474                 clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
 475                 clock-names = "baudclk", "apb_pclk";
 476                 pinctrl-names = "default";
 477                 pinctrl-0 = <&uart2_xfer>;
 478                 status = "disabled";
 479         };
 480
 481         i2c0: i2c@20072000 {
 482                 compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c";
 483                 reg = <0x20072000 0x1000>;
 484                 interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 485                 #address-cells = <1>;
 486                 #size-cells = <0>;
 487                 clock-names = "i2c";
 488                 clocks = <&cru PCLK_I2C0>;
 489                 pinctrl-names = "default";
 490                 pinctrl-0 = <&i2c0_xfer>;
 491                 status = "disabled";
 492         };
 493
 494         spi: spi@20074000 {
 495                 compatible = "rockchip,rockchip-spi";
 496                 reg = <0x20074000 0x1000>;
 497                 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 498                 clocks =<&cru PCLK_SPI>, <&cru SCLK_SPI>;
 499                 clock-names = "apb-pclk","spi_pclk";
 500                 dmas = <&pdma 8>, <&pdma 9>;
 501                 dma-names = "tx", "rx";
 502                 pinctrl-names = "default";
 503                 pinctrl-0 = <&spi_txd &spi_rxd &spi_clk &spi_cs0>;
 504                 #address-cells = <1>;
 505                 #size-cells = <0>;
 506                 status = "disabled";
 507         };
 508
 509         pinctrl: pinctrl {
 510                 compatible = "rockchip,rk3036-pinctrl";
 511                 rockchip,grf = <&grf>;
 512                 #address-cells = <1>;
 513                 #size-cells = <1>;
 514                 ranges;
 515
 516                 gpio0: gpio0@2007c000 {
 517                         compatible = "rockchip,gpio-bank";
 518                         reg = <0x2007c000 0x100>;
 519                         interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 520                         clocks = <&cru PCLK_GPIO0>;
 521
 522                         gpio-controller;
 523                         #gpio-cells = <2>;
 524
 525                         interrupt-controller;
 526                         #interrupt-cells = <2>;
 527                 };
 528
 529                 gpio1: gpio1@20080000 {
 530                         compatible = "rockchip,gpio-bank";
 531                         reg = <0x20080000 0x100>;
 532                         interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 533                         clocks = <&cru PCLK_GPIO1>;
 534
 535                         gpio-controller;
 536                         #gpio-cells = <2>;
 537
 538                         interrupt-controller;
 539                         #interrupt-cells = <2>;
 540                 };
 541
 542                 gpio2: gpio2@20084000 {
 543                         compatible = "rockchip,gpio-bank";
 544                         reg = <0x20084000 0x100>;
 545                         interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 546                         clocks = <&cru PCLK_GPIO2>;
 547
 548                         gpio-controller;
 549                         #gpio-cells = <2>;
 550
 551                         interrupt-controller;
 552                         #interrupt-cells = <2>;
 553                 };
 554
 555                 pcfg_pull_default: pcfg_pull_default {
 556                         bias-pull-pin-default;
 557                 };
 558
 559                 pcfg_pull_none: pcfg-pull-none {
 560                         bias-disable;
 561                 };
 562
 563                 pwm0 {
 564                         pwm0_pin: pwm0-pin {
 565                                 rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>;
 566                         };
 567                 };
 568
 569                 pwm1 {
 570                         pwm1_pin: pwm1-pin {
 571                                 rockchip,pins = <0 1 RK_FUNC_2 &pcfg_pull_none>;
 572                         };
 573                 };
 574
 575                 pwm2 {
 576                         pwm2_pin: pwm2-pin {
 577                                 rockchip,pins = <0 1 2 &pcfg_pull_none>;
 578                         };
 579                 };
 580
 581                 pwm3 {
 582                         pwm3_pin: pwm3-pin {
 583                                 rockchip,pins = <0 27 1 &pcfg_pull_none>;
 584                         };
 585                 };
 586
 587                 sdmmc {
 588                         sdmmc_clk: sdmmc-clk {
 589                                 rockchip,pins = <1 16 RK_FUNC_1 &pcfg_pull_none>;
 590                         };
 591
 592                         sdmmc_cmd: sdmmc-cmd {
 593                                 rockchip,pins = <1 15 RK_FUNC_1 &pcfg_pull_default>;
 594                         };
 595
 596                         sdmmc_cd: sdmcc-cd {
 597                                 rockchip,pins = <1 17 RK_FUNC_1 &pcfg_pull_default>;
 598                         };
 599
 600                         sdmmc_bus1: sdmmc-bus1 {
 601                                 rockchip,pins = <1 18 RK_FUNC_1 &pcfg_pull_default>;
 602                         };
 603
 604                         sdmmc_bus4: sdmmc-bus4 {
 605                                 rockchip,pins = <1 18 RK_FUNC_1 &pcfg_pull_default>,
 606                                                 <1 19 RK_FUNC_1 &pcfg_pull_default>,
 607                                                 <1 20 RK_FUNC_1 &pcfg_pull_default>,
 608                                                 <1 21 RK_FUNC_1 &pcfg_pull_default>;
 609                         };
 610                 };
 611
 612                 sdio {
 613                         sdio_bus1: sdio-bus1 {
 614                                 rockchip,pins = <0 11 RK_FUNC_1 &pcfg_pull_default>;
 615                         };
 616
 617                         sdio_bus4: sdio-bus4 {
 618                                 rockchip,pins = <0 11 RK_FUNC_1 &pcfg_pull_default>,
 619                                                 <0 12 RK_FUNC_1 &pcfg_pull_default>,
 620                                                 <0 13 RK_FUNC_1 &pcfg_pull_default>,
 621                                                 <0 14 RK_FUNC_1 &pcfg_pull_default>;
 622                         };
 623
 624                         sdio_cmd: sdio-cmd {
 625                                 rockchip,pins = <0 8 RK_FUNC_1 &pcfg_pull_default>;
 626                         };
 627
 628                         sdio_clk: sdio-clk {
 629                                 rockchip,pins = <0 9 RK_FUNC_1 &pcfg_pull_none>;
 630                         };
 631                 };
 632
 633                 emmc {
 634                         /*
 635                          * We run eMMC at max speed; bump up drive strength.
 636                          * We also have external pulls, so disable the internal ones.
 637                          */
 638                         emmc_clk: emmc-clk {
 639                                 rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>;
 640                         };
 641
 642                         emmc_cmd: emmc-cmd {
 643                                 rockchip,pins = <2 1 RK_FUNC_2 &pcfg_pull_default>;
 644                         };
 645
 646                         emmc_bus8: emmc-bus8 {
 647                                 rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_default>,
 648                                                 <1 25 RK_FUNC_2 &pcfg_pull_default>,
 649                                                 <1 26 RK_FUNC_2 &pcfg_pull_default>,
 650                                                 <1 27 RK_FUNC_2 &pcfg_pull_default>,
 651                                                 <1 28 RK_FUNC_2 &pcfg_pull_default>,
 652                                                 <1 29 RK_FUNC_2 &pcfg_pull_default>,
 653                                                 <1 30 RK_FUNC_2 &pcfg_pull_default>,
 654                                                 <1 31 RK_FUNC_2 &pcfg_pull_default>;
 655                         };
 656                 };
 657
 658                 emac {
 659                         emac_xfer: emac-xfer {
 660                                 rockchip,pins = <2 10 RK_FUNC_1 &pcfg_pull_default>, /* crs_dvalid */
 661                                                 <2 13 RK_FUNC_1 &pcfg_pull_default>, /* tx_en */
 662                                                 <2 14 RK_FUNC_1 &pcfg_pull_default>, /* mac_clk */
 663                                                 <2 15 RK_FUNC_1 &pcfg_pull_default>, /* rx_err */
 664                                                 <2 16 RK_FUNC_1 &pcfg_pull_default>, /* rxd1 */
 665                                                 <2 17 RK_FUNC_1 &pcfg_pull_default>, /* rxd0 */
 666                                                 <2 18 RK_FUNC_1 &pcfg_pull_default>, /* txd1 */
 667                                                 <2 19 RK_FUNC_1 &pcfg_pull_default>; /* txd0 */
 668                         };
 669
 670                         emac_mdio: emac-mdio {
 671                                 rockchip,pins = <2 12 RK_FUNC_1 &pcfg_pull_default>, /* mac_md */
 672                                                 <2 25 RK_FUNC_1 &pcfg_pull_default>; /* mac_mdclk */
 673                         };
 674                 };
 675
 676                 i2c0 {
 677                         i2c0_xfer: i2c0-xfer {
 678                                 rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>,
 679                                                 <0 1 RK_FUNC_1 &pcfg_pull_none>;
 680                         };
 681                 };
 682
 683                 i2c1 {
 684                         i2c1_xfer: i2c1-xfer {
 685                                 rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_none>,
 686                                                 <0 3 RK_FUNC_1 &pcfg_pull_none>;
 687                         };
 688                 };
 689
 690                 i2c2 {
 691                         i2c2_xfer: i2c2-xfer {
 692                                 rockchip,pins = <2 20 RK_FUNC_1 &pcfg_pull_none>,
 693                                                 <2 21 RK_FUNC_1 &pcfg_pull_none>;
 694                         };
 695                 };
 696
 697                 i2s {
 698                         i2s_bus: i2s-bus {
 699                                 rockchip,pins = <1 0 RK_FUNC_1 &pcfg_pull_default>,
 700                                                 <1 1 RK_FUNC_1 &pcfg_pull_default>,
 701                                                 <1 2 RK_FUNC_1 &pcfg_pull_default>,
 702                                                 <1 3 RK_FUNC_1 &pcfg_pull_default>,
 703                                                 <1 4 RK_FUNC_1 &pcfg_pull_default>,
 704                                                 <1 5 RK_FUNC_1 &pcfg_pull_default>;
 705                         };
 706                 };
 707
 708                 hdmi {
 709                         hdmi_ctl: hdmi-ctl {
 710                                 rockchip,pins = <1 8  RK_FUNC_1 &pcfg_pull_none>,
 711                                                 <1 9  RK_FUNC_1 &pcfg_pull_none>,
 712                                                 <1 10 RK_FUNC_1 &pcfg_pull_none>,
 713                                                 <1 11 RK_FUNC_1 &pcfg_pull_none>;
 714                         };
 715                 };
 716
 717                 uart0 {
 718                         uart0_xfer: uart0-xfer {
 719                                 rockchip,pins = <0 16 RK_FUNC_1 &pcfg_pull_default>,
 720                                                 <0 17 RK_FUNC_1 &pcfg_pull_none>;
 721                         };
 722
 723                         uart0_cts: uart0-cts {
 724                                 rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_default>;
 725                         };
 726
 727                         uart0_rts: uart0-rts {
 728                                 rockchip,pins = <0 19 RK_FUNC_1 &pcfg_pull_none>;
 729                         };
 730                 };
 731
 732                 uart1 {
 733                         uart1_xfer: uart1-xfer {
 734                                 rockchip,pins = <2 22 RK_FUNC_1 &pcfg_pull_default>,
 735                                                 <2 23 RK_FUNC_1 &pcfg_pull_none>;
 736                         };
 737                         /* no rts / cts for uart1 */
 738                 };
 739
 740                 uart2 {
 741                         uart2_xfer: uart2-xfer {
 742                                 rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_default>,
 743                                                 <1 19 RK_FUNC_2 &pcfg_pull_none>;
 744                         };
 745                         /* no rts / cts for uart2 */
 746                 };
 747
 748                 spi {
 749                         spi_txd:spi-txd {
 750                                 rockchip,pins = <1 29 RK_FUNC_3 &pcfg_pull_default>;
 751                         };
 752
 753                         spi_rxd:spi-rxd {
 754                                 rockchip,pins = <1 28 RK_FUNC_3 &pcfg_pull_default>;
 755                         };
 756
 757                         spi_clk:spi-clk {
 758                                 rockchip,pins = <2 0 RK_FUNC_2 &pcfg_pull_default>;
 759                         };
 760
 761                         spi_cs0:spi-cs0 {
 762                                 rockchip,pins = <1 30 RK_FUNC_3 &pcfg_pull_default>;
 763
 764                         };
 765
 766                         spi_cs1:spi-cs1 {
 767                                 rockchip,pins = <1 31 RK_FUNC_3 &pcfg_pull_default>;
 768
 769                         };
 770                 };
 771         };
 772 };