arch/arm/boot/dts/r8a7793-gose.dts

   1 /*
   2  * Device Tree Source for the Gose board
   3  *
   4  * Copyright (C) 2014-2015 Renesas Electronics Corporation
   5  *
   6  * This file is licensed under the terms of the GNU General Public License
   7  * version 2.  This program is licensed "as is" without any warranty of any
   8  * kind, whether express or implied.
   9  */
  10
  11 /*
  12  * SSI-AK4643
  13  *
  14  * SW1: 1: AK4643
  15  *      2: CN22
  16  *      3: ADV7511
  17  *
  18  * This command is required when Playback/Capture
  19  *
  20  *      amixer set "LINEOUT Mixer DACL" on
  21  *      amixer set "DVC Out" 100%
  22  *      amixer set "DVC In" 100%
  23  *
  24  * You can use Mute
  25  *
  26  *      amixer set "DVC Out Mute" on
  27  *      amixer set "DVC In Mute" on
  28  *
  29  * You can use Volume Ramp
  30  *
  31  *      amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
  32  *      amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
  33  *      amixer set "DVC Out Ramp" on
  34  *      aplay xxx.wav &
  35  *      amixer set "DVC Out"  80%  // Volume Down
  36  *      amixer set "DVC Out" 100%  // Volume Up
  37  */
  38
  39 /dts-v1/;
  40 #include "r8a7793.dtsi"
  41 #include <dt-bindings/gpio/gpio.h>
  42 #include <dt-bindings/input/input.h>
  43
  44 / {
  45         model = "Gose";
  46         compatible = "renesas,gose", "renesas,r8a7793";
  47
  48         aliases {
  49                 serial0 = &scif0;
  50                 serial1 = &scif1;
  51                 i2c9 = &gpioi2c2;
  52                 i2c10 = &gpioi2c4;
  53                 i2c11 = &i2chdmi;
  54                 i2c12 = &i2cexio4;
  55         };
  56
  57         chosen {
  58                 bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
  59                 stdout-path = "serial0:115200n8";
  60         };
  61
  62         memory@40000000 {
  63                 device_type = "memory";
  64                 reg = <0 0x40000000 0 0x40000000>;
  65         };
  66
  67         gpio-keys {
  68                 compatible = "gpio-keys";
  69
  70                 key-1 {
  71                         gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
  72                         linux,code = <KEY_1>;
  73                         label = "SW2-1";
  74                         wakeup-source;
  75                         debounce-interval = <20>;
  76                 };
  77                 key-2 {
  78                         gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
  79                         linux,code = <KEY_2>;
  80                         label = "SW2-2";
  81                         wakeup-source;
  82                         debounce-interval = <20>;
  83                 };
  84                 key-3 {
  85                         gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
  86                         linux,code = <KEY_3>;
  87                         label = "SW2-3";
  88                         wakeup-source;
  89                         debounce-interval = <20>;
  90                 };
  91                 key-4 {
  92                         gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
  93                         linux,code = <KEY_4>;
  94                         label = "SW2-4";
  95                         wakeup-source;
  96                         debounce-interval = <20>;
  97                 };
  98                 key-a {
  99                         gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 100                         linux,code = <KEY_A>;
 101                         label = "SW30";
 102                         wakeup-source;
 103                         debounce-interval = <20>;
 104                 };
 105                 key-b {
 106                         gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
 107                         linux,code = <KEY_B>;
 108                         label = "SW31";
 109                         wakeup-source;
 110                         debounce-interval = <20>;
 111                 };
 112                 key-c {
 113                         gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
 114                         linux,code = <KEY_C>;
 115                         label = "SW32";
 116                         wakeup-source;
 117                         debounce-interval = <20>;
 118                 };
 119                 key-d {
 120                         gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
 121                         linux,code = <KEY_D>;
 122                         label = "SW33";
 123                         wakeup-source;
 124                         debounce-interval = <20>;
 125                 };
 126                 key-e {
 127                         gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
 128                         linux,code = <KEY_E>;
 129                         label = "SW34";
 130                         wakeup-source;
 131                         debounce-interval = <20>;
 132                 };
 133                 key-f {
 134                         gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
 135                         linux,code = <KEY_F>;
 136                         label = "SW35";
 137                         wakeup-source;
 138                         debounce-interval = <20>;
 139                 };
 140                 key-g {
 141                         gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
 142                         linux,code = <KEY_G>;
 143                         label = "SW36";
 144                         wakeup-source;
 145                         debounce-interval = <20>;
 146                 };
 147         };
 148
 149         leds {
 150                 compatible = "gpio-leds";
 151                 led6 {
 152                         gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
 153                         label = "LED6";
 154                 };
 155                 led7 {
 156                         gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
 157                         label = "LED7";
 158                 };
 159                 led8 {
 160                         gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
 161                         label = "LED8";
 162                 };
 163         };
 164
 165         vcc_sdhi0: regulator-vcc-sdhi0 {
 166                 compatible = "regulator-fixed";
 167
 168                 regulator-name = "SDHI0 Vcc";
 169                 regulator-min-microvolt = <3300000>;
 170                 regulator-max-microvolt = <3300000>;
 171
 172                 gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
 173                 enable-active-high;
 174         };
 175
 176         vccq_sdhi0: regulator-vccq-sdhi0 {
 177                 compatible = "regulator-gpio";
 178
 179                 regulator-name = "SDHI0 VccQ";
 180                 regulator-min-microvolt = <1800000>;
 181                 regulator-max-microvolt = <3300000>;
 182
 183                 gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
 184                 gpios-states = <1>;
 185                 states = <3300000 1
 186                           1800000 0>;
 187         };
 188
 189         vcc_sdhi1: regulator-vcc-sdhi1 {
 190                 compatible = "regulator-fixed";
 191
 192                 regulator-name = "SDHI1 Vcc";
 193                 regulator-min-microvolt = <3300000>;
 194                 regulator-max-microvolt = <3300000>;
 195
 196                 gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
 197                 enable-active-high;
 198         };
 199
 200         vccq_sdhi1: regulator-vccq-sdhi1 {
 201                 compatible = "regulator-gpio";
 202
 203                 regulator-name = "SDHI1 VccQ";
 204                 regulator-min-microvolt = <1800000>;
 205                 regulator-max-microvolt = <3300000>;
 206
 207                 gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
 208                 gpios-states = <1>;
 209                 states = <3300000 1
 210                           1800000 0>;
 211         };
 212
 213         vcc_sdhi2: regulator-vcc-sdhi2 {
 214                 compatible = "regulator-fixed";
 215
 216                 regulator-name = "SDHI2 Vcc";
 217                 regulator-min-microvolt = <3300000>;
 218                 regulator-max-microvolt = <3300000>;
 219
 220                 gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
 221                 enable-active-high;
 222         };
 223
 224         vccq_sdhi2: regulator-vccq-sdhi2 {
 225                 compatible = "regulator-gpio";
 226
 227                 regulator-name = "SDHI2 VccQ";
 228                 regulator-min-microvolt = <1800000>;
 229                 regulator-max-microvolt = <3300000>;
 230
 231                 gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
 232                 gpios-states = <1>;
 233                 states = <3300000 1
 234                           1800000 0>;
 235         };
 236
 237         audio_clock: audio_clock {
 238                 compatible = "fixed-clock";
 239                 #clock-cells = <0>;
 240                 clock-frequency = <11289600>;
 241         };
 242
 243         rsnd_ak4643: sound {
 244                 compatible = "simple-audio-card";
 245
 246                 simple-audio-card,format = "left_j";
 247                 simple-audio-card,bitclock-master = <&sndcodec>;
 248                 simple-audio-card,frame-master = <&sndcodec>;
 249
 250                 sndcpu: simple-audio-card,cpu {
 251                         sound-dai = <&rcar_sound>;
 252                 };
 253
 254                 sndcodec: simple-audio-card,codec {
 255                         sound-dai = <&ak4643>;
 256                         clocks = <&audio_clock>;
 257                 };
 258         };
 259
 260         hdmi-in {
 261                 compatible = "hdmi-connector";
 262                 type = "a";
 263
 264                 port {
 265                         hdmi_con_in: endpoint {
 266                                 remote-endpoint = <&adv7612_in>;
 267                         };
 268                 };
 269         };
 270
 271         hdmi-out {
 272                 compatible = "hdmi-connector";
 273                 type = "a";
 274
 275                 port {
 276                         hdmi_con_out: endpoint {
 277                                 remote-endpoint = <&adv7511_out>;
 278                         };
 279                 };
 280         };
 281
 282         composite-in {
 283                 compatible = "composite-video-connector";
 284
 285                 port {
 286                         composite_con_in: endpoint {
 287                                 remote-endpoint = <&adv7180_in>;
 288                         };
 289                 };
 290         };
 291
 292         x2_clk: x2-clock {
 293                 compatible = "fixed-clock";
 294                 #clock-cells = <0>;
 295                 clock-frequency = <74250000>;
 296         };
 297
 298         x13_clk: x13-clock {
 299                 compatible = "fixed-clock";
 300                 #clock-cells = <0>;
 301                 clock-frequency = <148500000>;
 302         };
 303
 304         gpioi2c2: i2c-9 {
 305                 #address-cells = <1>;
 306                 #size-cells = <0>;
 307                 compatible = "i2c-gpio";
 308                 status = "disabled";
 309                 scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 310                 sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 311                 i2c-gpio,delay-us = <5>;
 312         };
 313
 314         gpioi2c4: i2c-10 {
 315                 #address-cells = <1>;
 316                 #size-cells = <0>;
 317                 compatible = "i2c-gpio";
 318                 status = "disabled";
 319                 scl-gpios = <&gpio7 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 320                 sda-gpios = <&gpio7 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 321                 i2c-gpio,delay-us = <5>;
 322         };
 323
 324         /*
 325          * A fallback to GPIO is provided for I2C2.
 326          */
 327         i2chdmi: i2c-11 {
 328                 compatible = "i2c-demux-pinctrl";
 329                 i2c-parent = <&i2c2>, <&gpioi2c2>;
 330                 i2c-bus-name = "i2c-hdmi";
 331                 #address-cells = <1>;
 332                 #size-cells = <0>;
 333
 334                 ak4643: codec@12 {
 335                         compatible = "asahi-kasei,ak4643";
 336                         #sound-dai-cells = <0>;
 337                         reg = <0x12>;
 338                 };
 339
 340                 composite-in@20 {
 341                         compatible = "adi,adv7180cp";
 342                         reg = <0x20>;
 343                         remote = <&vin1>;
 344
 345                         port {
 346                                 #address-cells = <1>;
 347                                 #size-cells = <0>;
 348
 349                                 port@0 {
 350                                         reg = <0>;
 351                                         adv7180_in: endpoint {
 352                                                 remote-endpoint = <&composite_con_in>;
 353                                         };
 354                                 };
 355
 356                                 port@3 {
 357                                         reg = <3>;
 358                                         adv7180_out: endpoint {
 359                                                 bus-width = <8>;
 360                                                 remote-endpoint = <&vin1ep>;
 361                                         };
 362                                 };
 363                         };
 364                 };
 365
 366                 hdmi@39 {
 367                         compatible = "adi,adv7511w";
 368                         reg = <0x39>;
 369                         interrupt-parent = <&gpio3>;
 370                         interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
 371
 372                         adi,input-depth = <8>;
 373                         adi,input-colorspace = "rgb";
 374                         adi,input-clock = "1x";
 375                         adi,input-style = <1>;
 376                         adi,input-justification = "evenly";
 377
 378                         ports {
 379                                 #address-cells = <1>;
 380                                 #size-cells = <0>;
 381
 382                                 port@0 {
 383                                         reg = <0>;
 384                                         adv7511_in: endpoint {
 385                                                 remote-endpoint = <&du_out_rgb>;
 386                                         };
 387                                 };
 388
 389                                 port@1 {
 390                                         reg = <1>;
 391                                         adv7511_out: endpoint {
 392                                                 remote-endpoint = <&hdmi_con_out>;
 393                                         };
 394                                 };
 395                         };
 396                 };
 397
 398                 hdmi-in@4c {
 399                         compatible = "adi,adv7612";
 400                         reg = <0x4c>;
 401                         interrupt-parent = <&gpio4>;
 402                         interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 403                         default-input = <0>;
 404
 405                         port {
 406                                 #address-cells = <1>;
 407                                 #size-cells = <0>;
 408
 409                                 port@0 {
 410                                         reg = <0>;
 411                                         adv7612_in: endpoint {
 412                                                 remote-endpoint = <&hdmi_con_in>;
 413                                         };
 414                                 };
 415
 416                                 port@2 {
 417                                         reg = <2>;
 418                                         adv7612_out: endpoint {
 419                                                 remote-endpoint = <&vin0ep2>;
 420                                         };
 421                                 };
 422                         };
 423                 };
 424
 425                 eeprom@50 {
 426                         compatible = "renesas,r1ex24002", "atmel,24c02";
 427                         reg = <0x50>;
 428                         pagesize = <16>;
 429                 };
 430         };
 431
 432         /*
 433          * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
 434          * A fallback to GPIO is provided.
 435          */
 436         i2cexio4: i2c-12 {
 437                 compatible = "i2c-demux-pinctrl";
 438                 i2c-parent = <&i2c4>, <&gpioi2c4>;
 439                 i2c-bus-name = "i2c-exio4";
 440                 #address-cells = <1>;
 441                 #size-cells = <0>;
 442         };
 443 };
 444
 445 &du {
 446         pinctrl-0 = <&du_pins>;
 447         pinctrl-names = "default";
 448         status = "okay";
 449
 450         clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
 451                  <&x13_clk>, <&x2_clk>;
 452         clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
 453
 454         ports {
 455                 port@0 {
 456                         endpoint {
 457                                 remote-endpoint = <&adv7511_in>;
 458                         };
 459                 };
 460         };
 461 };
 462
 463 &lvds0 {
 464         ports {
 465                 port@1 {
 466                         lvds_connector: endpoint {
 467                         };
 468                 };
 469         };
 470 };
 471
 472 &extal_clk {
 473         clock-frequency = <20000000>;
 474 };
 475
 476 &pfc {
 477         pinctrl-0 = <&scif_clk_pins>;
 478         pinctrl-names = "default";
 479
 480         i2c2_pins: i2c2 {
 481                 groups = "i2c2";
 482                 function = "i2c2";
 483         };
 484
 485         i2c4_pins: i2c4 {
 486                 groups = "i2c4_c";
 487                 function = "i2c4";
 488         };
 489
 490         du_pins: du {
 491                 groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
 492                 function = "du";
 493         };
 494
 495         scif0_pins: scif0 {
 496                 groups = "scif0_data_d";
 497                 function = "scif0";
 498         };
 499
 500         scif1_pins: scif1 {
 501                 groups = "scif1_data_d";
 502                 function = "scif1";
 503         };
 504
 505         scif_clk_pins: scif_clk {
 506                 groups = "scif_clk";
 507                 function = "scif_clk";
 508         };
 509
 510         ether_pins: ether {
 511                 groups = "eth_link", "eth_mdio", "eth_rmii";
 512                 function = "eth";
 513         };
 514
 515         phy1_pins: phy1 {
 516                 groups = "intc_irq0";
 517                 function = "intc";
 518         };
 519
 520         sdhi0_pins: sd0 {
 521                 groups = "sdhi0_data4", "sdhi0_ctrl";
 522                 function = "sdhi0";
 523                 power-source = <3300>;
 524         };
 525
 526         sdhi0_pins_uhs: sd0_uhs {
 527                 groups = "sdhi0_data4", "sdhi0_ctrl";
 528                 function = "sdhi0";
 529                 power-source = <1800>;
 530         };
 531
 532         sdhi1_pins: sd1 {
 533                 groups = "sdhi1_data4", "sdhi1_ctrl";
 534                 function = "sdhi1";
 535                 power-source = <3300>;
 536         };
 537
 538         sdhi1_pins_uhs: sd1_uhs {
 539                 groups = "sdhi1_data4", "sdhi1_ctrl";
 540                 function = "sdhi1";
 541                 power-source = <1800>;
 542         };
 543
 544         sdhi2_pins: sd2 {
 545                 groups = "sdhi2_data4", "sdhi2_ctrl";
 546                 function = "sdhi2";
 547                 power-source = <3300>;
 548         };
 549
 550         sdhi2_pins_uhs: sd2_uhs {
 551                 groups = "sdhi2_data4", "sdhi2_ctrl";
 552                 function = "sdhi2";
 553                 power-source = <1800>;
 554         };
 555
 556         qspi_pins: qspi {
 557                 groups = "qspi_ctrl", "qspi_data4";
 558                 function = "qspi";
 559         };
 560
 561         sound_pins: sound {
 562                 groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
 563                 function = "ssi";
 564         };
 565
 566         sound_clk_pins: sound_clk {
 567                 groups = "audio_clk_a";
 568                 function = "audio_clk";
 569         };
 570
 571         vin0_pins: vin0 {
 572                 groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
 573                 function = "vin0";
 574         };
 575
 576         vin1_pins: vin1 {
 577                 groups = "vin1_data8", "vin1_clk";
 578                 function = "vin1";
 579         };
 580 };
 581
 582 &ether {
 583         pinctrl-0 = <&ether_pins &phy1_pins>;
 584         pinctrl-names = "default";
 585
 586         phy-handle = <&phy1>;
 587         renesas,ether-link-active-low;
 588         status = "okay";
 589
 590         phy1: ethernet-phy@1 {
 591                 reg = <1>;
 592                 interrupt-parent = <&irqc0>;
 593                 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 594                 micrel,led-mode = <1>;
 595         };
 596 };
 597
 598 &cmt0 {
 599         status = "okay";
 600 };
 601
 602 &rwdt {
 603         timeout-sec = <60>;
 604         status = "okay";
 605 };
 606
 607 &scif0 {
 608         pinctrl-0 = <&scif0_pins>;
 609         pinctrl-names = "default";
 610
 611         status = "okay";
 612 };
 613
 614 &scif1 {
 615         pinctrl-0 = <&scif1_pins>;
 616         pinctrl-names = "default";
 617
 618         status = "okay";
 619 };
 620
 621 &scif_clk {
 622         clock-frequency = <14745600>;
 623 };
 624
 625 &sdhi0 {
 626         pinctrl-0 = <&sdhi0_pins>;
 627         pinctrl-1 = <&sdhi0_pins_uhs>;
 628         pinctrl-names = "default", "state_uhs";
 629
 630         vmmc-supply = <&vcc_sdhi0>;
 631         vqmmc-supply = <&vccq_sdhi0>;
 632         cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
 633         wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
 634         sd-uhs-sdr50;
 635         sd-uhs-sdr104;
 636         status = "okay";
 637 };
 638
 639 &sdhi1 {
 640         pinctrl-0 = <&sdhi1_pins>;
 641         pinctrl-1 = <&sdhi1_pins_uhs>;
 642         pinctrl-names = "default", "state_uhs";
 643
 644         vmmc-supply = <&vcc_sdhi1>;
 645         vqmmc-supply = <&vccq_sdhi1>;
 646         cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
 647         wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
 648         sd-uhs-sdr50;
 649         status = "okay";
 650 };
 651
 652 &sdhi2 {
 653         pinctrl-0 = <&sdhi2_pins>;
 654         pinctrl-1 = <&sdhi2_pins_uhs>;
 655         pinctrl-names = "default", "state_uhs";
 656
 657         vmmc-supply = <&vcc_sdhi2>;
 658         vqmmc-supply = <&vccq_sdhi2>;
 659         cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
 660         sd-uhs-sdr50;
 661         status = "okay";
 662 };
 663
 664 &qspi {
 665         pinctrl-0 = <&qspi_pins>;
 666         pinctrl-names = "default";
 667
 668         status = "okay";
 669
 670         flash@0 {
 671                 compatible = "spansion,s25fl512s", "jedec,spi-nor";
 672                 reg = <0>;
 673                 spi-max-frequency = <30000000>;
 674                 spi-tx-bus-width = <4>;
 675                 spi-rx-bus-width = <4>;
 676                 spi-cpol;
 677                 spi-cpha;
 678                 m25p,fast-read;
 679
 680                 partitions {
 681                         compatible = "fixed-partitions";
 682                         #address-cells = <1>;
 683                         #size-cells = <1>;
 684
 685                         partition@0 {
 686                                 label = "loader";
 687                                 reg = <0x00000000 0x00040000>;
 688                                 read-only;
 689                         };
 690                         partition@40000 {
 691                                 label = "user";
 692                                 reg = <0x00040000 0x00400000>;
 693                                 read-only;
 694                         };
 695                         partition@440000 {
 696                                 label = "flash";
 697                                 reg = <0x00440000 0x03bc0000>;
 698                         };
 699                 };
 700         };
 701 };
 702
 703 &i2c2 {
 704         pinctrl-0 = <&i2c2_pins>;
 705         pinctrl-names = "i2c-hdmi";
 706
 707         status = "okay";
 708         clock-frequency = <100000>;
 709
 710 };
 711
 712 &i2c6 {
 713         status = "okay";
 714         clock-frequency = <100000>;
 715
 716         pmic@58 {
 717                 compatible = "dlg,da9063";
 718                 reg = <0x58>;
 719                 interrupt-parent = <&irqc0>;
 720                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 721                 interrupt-controller;
 722
 723                 rtc {
 724                         compatible = "dlg,da9063-rtc";
 725                 };
 726
 727                 wdt {
 728                         compatible = "dlg,da9063-watchdog";
 729                 };
 730         };
 731 };
 732
 733 &i2c4 {
 734         pinctrl-0 = <&i2c4_pins>;
 735         pinctrl-names = "i2c-exio4";
 736 };
 737
 738 &rcar_sound {
 739         pinctrl-0 = <&sound_pins &sound_clk_pins>;
 740         pinctrl-names = "default";
 741
 742         /* Single DAI */
 743         #sound-dai-cells = <0>;
 744
 745         status = "okay";
 746
 747         rcar_sound,dai {
 748                 dai0 {
 749                         playback = <&ssi0 &src2 &dvc0>;
 750                         capture  = <&ssi1 &src3 &dvc1>;
 751                 };
 752         };
 753 };
 754
 755 &ssi1 {
 756         shared-pin;
 757 };
 758
 759 /* HDMI video input */
 760 &vin0 {
 761         status = "okay";
 762         pinctrl-0 = <&vin0_pins>;
 763         pinctrl-names = "default";
 764
 765         port {
 766                 vin0ep2: endpoint {
 767                         remote-endpoint = <&adv7612_out>;
 768                         bus-width = <24>;
 769                         hsync-active = <0>;
 770                         vsync-active = <0>;
 771                         pclk-sample = <1>;
 772                         data-active = <1>;
 773                 };
 774         };
 775 };
 776
 777 /* composite video input */
 778 &vin1 {
 779         pinctrl-0 = <&vin1_pins>;
 780         pinctrl-names = "default";
 781
 782         status = "okay";
 783
 784         port {
 785                 vin1ep: endpoint {
 786                         remote-endpoint = <&adv7180_out>;
 787                         bus-width = <8>;
 788                 };
 789         };
 790 };