arch/arm/boot/dts/r8a7791-koelsch.dts

   1 /*
   2  * Device Tree Source for the Koelsch board
   3  *
   4  * Copyright (C) 2013 Renesas Electronics Corporation
   5  * Copyright (C) 2013-2014 Renesas Solutions Corp.
   6  * Copyright (C) 2014 Cogent Embedded, Inc.
   7  *
   8  * This file is licensed under the terms of the GNU General Public License
   9  * version 2.  This program is licensed "as is" without any warranty of any
  10  * kind, whether express or implied.
  11  */
  12
  13 /*
  14  * SSI-AK4643
  15  *
  16  * SW1: 1: AK4643
  17  *      2: CN22
  18  *      3: ADV7511
  19  *
  20  * This command is required when Playback/Capture
  21  *
  22  *      amixer set "LINEOUT Mixer DACL" on
  23  *      amixer set "DVC Out" 100%
  24  *      amixer set "DVC In" 100%
  25  *
  26  * You can use Mute
  27  *
  28  *      amixer set "DVC Out Mute" on
  29  *      amixer set "DVC In Mute" on
  30  *
  31  * You can use Volume Ramp
  32  *
  33  *      amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
  34  *      amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
  35  *      amixer set "DVC Out Ramp" on
  36  *      aplay xxx.wav &
  37  *      amixer set "DVC Out"  80%  // Volume Down
  38  *      amixer set "DVC Out" 100%  // Volume Up
  39  */
  40
  41 /dts-v1/;
  42 #include "r8a7791.dtsi"
  43 #include <dt-bindings/gpio/gpio.h>
  44 #include <dt-bindings/input/input.h>
  45
  46 / {
  47         model = "Koelsch";
  48         compatible = "renesas,koelsch", "renesas,r8a7791";
  49
  50         aliases {
  51                 serial0 = &scif0;
  52                 serial1 = &scif1;
  53                 i2c9 = &gpioi2c1;
  54                 i2c12 = &i2cexio1;
  55         };
  56
  57         chosen {
  58                 bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
  59                 stdout-path = "serial0:115200n8";
  60         };
  61
  62         memory@40000000 {
  63                 device_type = "memory";
  64                 reg = <0 0x40000000 0 0x40000000>;
  65         };
  66
  67         memory@200000000 {
  68                 device_type = "memory";
  69                 reg = <2 0x00000000 0 0x40000000>;
  70         };
  71
  72         lbsc {
  73                 #address-cells = <1>;
  74                 #size-cells = <1>;
  75         };
  76
  77         keyboard {
  78                 compatible = "gpio-keys";
  79
  80                 key-1 {
  81                         gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
  82                         linux,code = <KEY_1>;
  83                         label = "SW2-1";
  84                         wakeup-source;
  85                         debounce-interval = <20>;
  86                 };
  87                 key-2 {
  88                         gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
  89                         linux,code = <KEY_2>;
  90                         label = "SW2-2";
  91                         wakeup-source;
  92                         debounce-interval = <20>;
  93                 };
  94                 key-3 {
  95                         gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
  96                         linux,code = <KEY_3>;
  97                         label = "SW2-3";
  98                         wakeup-source;
  99                         debounce-interval = <20>;
 100                 };
 101                 key-4 {
 102                         gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
 103                         linux,code = <KEY_4>;
 104                         label = "SW2-4";
 105                         wakeup-source;
 106                         debounce-interval = <20>;
 107                 };
 108                 key-a {
 109                         gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 110                         linux,code = <KEY_A>;
 111                         label = "SW30";
 112                         wakeup-source;
 113                         debounce-interval = <20>;
 114                 };
 115                 key-b {
 116                         gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
 117                         linux,code = <KEY_B>;
 118                         label = "SW31";
 119                         wakeup-source;
 120                         debounce-interval = <20>;
 121                 };
 122                 key-c {
 123                         gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
 124                         linux,code = <KEY_C>;
 125                         label = "SW32";
 126                         wakeup-source;
 127                         debounce-interval = <20>;
 128                 };
 129                 key-d {
 130                         gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
 131                         linux,code = <KEY_D>;
 132                         label = "SW33";
 133                         wakeup-source;
 134                         debounce-interval = <20>;
 135                 };
 136                 key-e {
 137                         gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
 138                         linux,code = <KEY_E>;
 139                         label = "SW34";
 140                         wakeup-source;
 141                         debounce-interval = <20>;
 142                 };
 143                 key-f {
 144                         gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
 145                         linux,code = <KEY_F>;
 146                         label = "SW35";
 147                         wakeup-source;
 148                         debounce-interval = <20>;
 149                 };
 150                 key-g {
 151                         gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
 152                         linux,code = <KEY_G>;
 153                         label = "SW36";
 154                         wakeup-source;
 155                         debounce-interval = <20>;
 156                 };
 157         };
 158
 159         leds {
 160                 compatible = "gpio-leds";
 161                 led6 {
 162                         gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
 163                         label = "LED6";
 164                 };
 165                 led7 {
 166                         gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
 167                         label = "LED7";
 168                 };
 169                 led8 {
 170                         gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
 171                         label = "LED8";
 172                 };
 173         };
 174
 175         vcc_sdhi0: regulator-vcc-sdhi0 {
 176                 compatible = "regulator-fixed";
 177
 178                 regulator-name = "SDHI0 Vcc";
 179                 regulator-min-microvolt = <3300000>;
 180                 regulator-max-microvolt = <3300000>;
 181
 182                 gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
 183                 enable-active-high;
 184         };
 185
 186         vccq_sdhi0: regulator-vccq-sdhi0 {
 187                 compatible = "regulator-gpio";
 188
 189                 regulator-name = "SDHI0 VccQ";
 190                 regulator-min-microvolt = <1800000>;
 191                 regulator-max-microvolt = <3300000>;
 192
 193                 gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
 194                 gpios-states = <1>;
 195                 states = <3300000 1
 196                           1800000 0>;
 197         };
 198
 199         vcc_sdhi1: regulator-vcc-sdhi1 {
 200                 compatible = "regulator-fixed";
 201
 202                 regulator-name = "SDHI1 Vcc";
 203                 regulator-min-microvolt = <3300000>;
 204                 regulator-max-microvolt = <3300000>;
 205
 206                 gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
 207                 enable-active-high;
 208         };
 209
 210         vccq_sdhi1: regulator-vccq-sdhi1 {
 211                 compatible = "regulator-gpio";
 212
 213                 regulator-name = "SDHI1 VccQ";
 214                 regulator-min-microvolt = <1800000>;
 215                 regulator-max-microvolt = <3300000>;
 216
 217                 gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
 218                 gpios-states = <1>;
 219                 states = <3300000 1
 220                           1800000 0>;
 221         };
 222
 223         vcc_sdhi2: regulator-vcc-sdhi2 {
 224                 compatible = "regulator-fixed";
 225
 226                 regulator-name = "SDHI2 Vcc";
 227                 regulator-min-microvolt = <3300000>;
 228                 regulator-max-microvolt = <3300000>;
 229
 230                 gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
 231                 enable-active-high;
 232         };
 233
 234         vccq_sdhi2: regulator-vccq-sdhi2 {
 235                 compatible = "regulator-gpio";
 236
 237                 regulator-name = "SDHI2 VccQ";
 238                 regulator-min-microvolt = <1800000>;
 239                 regulator-max-microvolt = <3300000>;
 240
 241                 gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
 242                 gpios-states = <1>;
 243                 states = <3300000 1
 244                           1800000 0>;
 245         };
 246
 247         audio_clock: audio_clock {
 248                 compatible = "fixed-clock";
 249                 #clock-cells = <0>;
 250                 clock-frequency = <11289600>;
 251         };
 252
 253         rsnd_ak4643: sound {
 254                 compatible = "simple-audio-card";
 255
 256                 simple-audio-card,format = "left_j";
 257                 simple-audio-card,bitclock-master = <&sndcodec>;
 258                 simple-audio-card,frame-master = <&sndcodec>;
 259
 260                 sndcpu: simple-audio-card,cpu {
 261                         sound-dai = <&rcar_sound>;
 262                 };
 263
 264                 sndcodec: simple-audio-card,codec {
 265                         sound-dai = <&ak4643>;
 266                         clocks = <&audio_clock>;
 267                 };
 268         };
 269
 270         hdmi-in {
 271                 compatible = "hdmi-connector";
 272                 type = "a";
 273
 274                 port {
 275                         hdmi_con_in: endpoint {
 276                                 remote-endpoint = <&adv7612_in>;
 277                         };
 278                 };
 279         };
 280
 281         hdmi-out {
 282                 compatible = "hdmi-connector";
 283                 type = "a";
 284
 285                 port {
 286                         hdmi_con_out: endpoint {
 287                                 remote-endpoint = <&adv7511_out>;
 288                         };
 289                 };
 290         };
 291
 292         x2_clk: x2-clock {
 293                 compatible = "fixed-clock";
 294                 #clock-cells = <0>;
 295                 clock-frequency = <74250000>;
 296         };
 297
 298         x13_clk: x13-clock {
 299                 compatible = "fixed-clock";
 300                 #clock-cells = <0>;
 301                 clock-frequency = <148500000>;
 302         };
 303
 304         gpioi2c1: i2c-9 {
 305                 #address-cells = <1>;
 306                 #size-cells = <0>;
 307                 compatible = "i2c-gpio";
 308                 status = "disabled";
 309                 gpios = <&gpio7 16 GPIO_ACTIVE_HIGH /* sda */
 310                          &gpio7 15 GPIO_ACTIVE_HIGH /* scl */
 311                         >;
 312                 i2c-gpio,delay-us = <5>;
 313         };
 314
 315         /*
 316          * I2C1 is routed to EXIO connector B, pins 64 (SCL) + 66 (SDA).
 317          * A fallback to GPIO is provided.
 318          */
 319         i2cexio1: i2c-12 {
 320                 compatible = "i2c-demux-pinctrl";
 321                 i2c-parent = <&i2c1>, <&gpioi2c1>;
 322                 i2c-bus-name = "i2c-exio1";
 323                 #address-cells = <1>;
 324                 #size-cells = <0>;
 325         };
 326 };
 327
 328 &du {
 329         pinctrl-0 = <&du_pins>;
 330         pinctrl-names = "default";
 331         status = "okay";
 332
 333         clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 726>,
 334                  <&x13_clk>, <&x2_clk>;
 335         clock-names = "du.0", "du.1", "lvds.0",
 336                       "dclkin.0", "dclkin.1";
 337
 338         ports {
 339                 port@0 {
 340                         endpoint {
 341                                 remote-endpoint = <&adv7511_in>;
 342                         };
 343                 };
 344                 port@1 {
 345                         lvds_connector: endpoint {
 346                         };
 347                 };
 348         };
 349 };
 350
 351 &extal_clk {
 352         clock-frequency = <20000000>;
 353 };
 354
 355 &pfc {
 356         pinctrl-0 = <&scif_clk_pins>;
 357         pinctrl-names = "default";
 358
 359         i2c1_pins: i2c1 {
 360                 groups = "i2c1";
 361                 function = "i2c1";
 362         };
 363
 364         i2c2_pins: i2c2 {
 365                 groups = "i2c2";
 366                 function = "i2c2";
 367         };
 368
 369         du_pins: du {
 370                 groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
 371                 function = "du";
 372         };
 373
 374         scif0_pins: scif0 {
 375                 groups = "scif0_data_d";
 376                 function = "scif0";
 377         };
 378
 379         scif1_pins: scif1 {
 380                 groups = "scif1_data_d";
 381                 function = "scif1";
 382         };
 383
 384         scif_clk_pins: scif_clk {
 385                 groups = "scif_clk";
 386                 function = "scif_clk";
 387         };
 388
 389         ether_pins: ether {
 390                 groups = "eth_link", "eth_mdio", "eth_rmii";
 391                 function = "eth";
 392         };
 393
 394         phy1_pins: phy1 {
 395                 groups = "intc_irq0";
 396                 function = "intc";
 397         };
 398
 399         sdhi0_pins: sd0 {
 400                 groups = "sdhi0_data4", "sdhi0_ctrl";
 401                 function = "sdhi0";
 402                 power-source = <3300>;
 403         };
 404
 405         sdhi0_pins_uhs: sd0_uhs {
 406                 groups = "sdhi0_data4", "sdhi0_ctrl";
 407                 function = "sdhi0";
 408                 power-source = <1800>;
 409         };
 410
 411         sdhi1_pins: sd1 {
 412                 groups = "sdhi1_data4", "sdhi1_ctrl";
 413                 function = "sdhi1";
 414                 power-source = <3300>;
 415         };
 416
 417         sdhi1_pins_uhs: sd1_uhs {
 418                 groups = "sdhi1_data4", "sdhi1_ctrl";
 419                 function = "sdhi1";
 420                 power-source = <1800>;
 421         };
 422
 423         sdhi2_pins: sd2 {
 424                 groups = "sdhi2_data4", "sdhi2_ctrl";
 425                 function = "sdhi2";
 426                 power-source = <3300>;
 427         };
 428
 429         sdhi2_pins_uhs: sd2_uhs {
 430                 groups = "sdhi2_data4", "sdhi2_ctrl";
 431                 function = "sdhi2";
 432                 power-source = <1800>;
 433         };
 434
 435         qspi_pins: qspi {
 436                 groups = "qspi_ctrl", "qspi_data4";
 437                 function = "qspi";
 438         };
 439
 440         msiof0_pins: msiof0 {
 441                 groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
 442                                  "msiof0_tx";
 443                 function = "msiof0";
 444         };
 445
 446         usb0_pins: usb0 {
 447                 groups = "usb0";
 448                 function = "usb0";
 449         };
 450
 451         usb1_pins: usb1 {
 452                 groups = "usb1";
 453                 function = "usb1";
 454         };
 455
 456         vin0_pins: vin0 {
 457                 groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
 458                 function = "vin0";
 459         };
 460
 461         vin1_pins: vin1 {
 462                 groups = "vin1_data8", "vin1_clk";
 463                 function = "vin1";
 464         };
 465
 466         sound_pins: sound {
 467                 groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
 468                 function = "ssi";
 469         };
 470
 471         sound_clk_pins: sound_clk {
 472                 groups = "audio_clk_a";
 473                 function = "audio_clk";
 474         };
 475 };
 476
 477 &ether {
 478         pinctrl-0 = <&ether_pins &phy1_pins>;
 479         pinctrl-names = "default";
 480
 481         phy-handle = <&phy1>;
 482         renesas,ether-link-active-low;
 483         status = "okay";
 484
 485         phy1: ethernet-phy@1 {
 486                 reg = <1>;
 487                 interrupt-parent = <&irqc0>;
 488                 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 489                 micrel,led-mode = <1>;
 490         };
 491 };
 492
 493 &cmt0 {
 494         status = "okay";
 495 };
 496
 497 &sata0 {
 498         status = "okay";
 499 };
 500
 501 &scif0 {
 502         pinctrl-0 = <&scif0_pins>;
 503         pinctrl-names = "default";
 504
 505         status = "okay";
 506 };
 507
 508 &scif1 {
 509         pinctrl-0 = <&scif1_pins>;
 510         pinctrl-names = "default";
 511
 512         status = "okay";
 513 };
 514
 515 &scif_clk {
 516         clock-frequency = <14745600>;
 517 };
 518
 519 &sdhi0 {
 520         pinctrl-0 = <&sdhi0_pins>;
 521         pinctrl-1 = <&sdhi0_pins_uhs>;
 522         pinctrl-names = "default", "state_uhs";
 523
 524         vmmc-supply = <&vcc_sdhi0>;
 525         vqmmc-supply = <&vccq_sdhi0>;
 526         cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
 527         wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
 528         sd-uhs-sdr50;
 529         sd-uhs-sdr104;
 530         status = "okay";
 531 };
 532
 533 &sdhi1 {
 534         pinctrl-0 = <&sdhi1_pins>;
 535         pinctrl-1 = <&sdhi1_pins_uhs>;
 536         pinctrl-names = "default", "state_uhs";
 537
 538         vmmc-supply = <&vcc_sdhi1>;
 539         vqmmc-supply = <&vccq_sdhi1>;
 540         cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
 541         wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
 542         sd-uhs-sdr50;
 543         status = "okay";
 544 };
 545
 546 &sdhi2 {
 547         pinctrl-0 = <&sdhi2_pins>;
 548         pinctrl-1 = <&sdhi2_pins_uhs>;
 549         pinctrl-names = "default", "state_uhs";
 550
 551         vmmc-supply = <&vcc_sdhi2>;
 552         vqmmc-supply = <&vccq_sdhi2>;
 553         cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
 554         sd-uhs-sdr50;
 555         status = "okay";
 556 };
 557
 558 &qspi {
 559         pinctrl-0 = <&qspi_pins>;
 560         pinctrl-names = "default";
 561
 562         status = "okay";
 563
 564         flash: flash@0 {
 565                 compatible = "spansion,s25fl512s", "jedec,spi-nor";
 566                 reg = <0>;
 567                 spi-max-frequency = <30000000>;
 568                 spi-tx-bus-width = <4>;
 569                 spi-rx-bus-width = <4>;
 570                 spi-cpha;
 571                 spi-cpol;
 572                 m25p,fast-read;
 573
 574                 partitions {
 575                         compatible = "fixed-partitions";
 576                         #address-cells = <1>;
 577                         #size-cells = <1>;
 578
 579                         partition@0 {
 580                                 label = "loader";
 581                                 reg = <0x00000000 0x00080000>;
 582                                 read-only;
 583                         };
 584                         partition@80000 {
 585                                 label = "user";
 586                                 reg = <0x00080000 0x00580000>;
 587                                 read-only;
 588                         };
 589                         partition@600000 {
 590                                 label = "flash";
 591                                 reg = <0x00600000 0x03a00000>;
 592                         };
 593                 };
 594         };
 595 };
 596
 597 &msiof0 {
 598         pinctrl-0 = <&msiof0_pins>;
 599         pinctrl-names = "default";
 600
 601         status = "okay";
 602
 603         pmic: pmic@0 {
 604                 compatible = "renesas,r2a11302ft";
 605                 reg = <0>;
 606                 spi-max-frequency = <6000000>;
 607                 spi-cpol;
 608                 spi-cpha;
 609         };
 610 };
 611
 612 &i2c1 {
 613         pinctrl-0 = <&i2c1_pins>;
 614         pinctrl-names = "i2c-exio1";
 615 };
 616
 617 &i2c2 {
 618         pinctrl-0 = <&i2c2_pins>;
 619         pinctrl-names = "default";
 620
 621         status = "okay";
 622         clock-frequency = <100000>;
 623
 624         ak4643: codec@12 {
 625                 compatible = "asahi-kasei,ak4643";
 626                 #sound-dai-cells = <0>;
 627                 reg = <0x12>;
 628         };
 629
 630         composite-in@20 {
 631                 compatible = "adi,adv7180";
 632                 reg = <0x20>;
 633                 remote = <&vin1>;
 634
 635                 port {
 636                         adv7180: endpoint {
 637                                 bus-width = <8>;
 638                                 remote-endpoint = <&vin1ep>;
 639                         };
 640                 };
 641         };
 642
 643         cec_clock: cec-clock {
 644                 compatible = "fixed-clock";
 645                 #clock-cells = <0>;
 646                 clock-frequency = <12000000>;
 647         };
 648
 649         hdmi@39 {
 650                 compatible = "adi,adv7511w";
 651                 reg = <0x39>;
 652                 interrupt-parent = <&gpio3>;
 653                 interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
 654                 clocks = <&cec_clock>;
 655                 clock-names = "cec";
 656
 657                 adi,input-depth = <8>;
 658                 adi,input-colorspace = "rgb";
 659                 adi,input-clock = "1x";
 660                 adi,input-style = <1>;
 661                 adi,input-justification = "evenly";
 662
 663                 ports {
 664                         #address-cells = <1>;
 665                         #size-cells = <0>;
 666
 667                         port@0 {
 668                                 reg = <0>;
 669                                 adv7511_in: endpoint {
 670                                         remote-endpoint = <&du_out_rgb>;
 671                                 };
 672                         };
 673
 674                         port@1 {
 675                                 reg = <1>;
 676                                 adv7511_out: endpoint {
 677                                         remote-endpoint = <&hdmi_con_out>;
 678                                 };
 679                         };
 680                 };
 681         };
 682
 683         hdmi-in@4c {
 684                 compatible = "adi,adv7612";
 685                 reg = <0x4c>;
 686                 interrupt-parent = <&gpio4>;
 687                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 688                 default-input = <0>;
 689
 690                 ports {
 691                         #address-cells = <1>;
 692                         #size-cells = <0>;
 693
 694                         port@0 {
 695                                 reg = <0>;
 696                                 adv7612_in: endpoint {
 697                                         remote-endpoint = <&hdmi_con_in>;
 698                                 };
 699                         };
 700
 701                         port@2 {
 702                                 reg = <2>;
 703                                 adv7612_out: endpoint {
 704                                         remote-endpoint = <&vin0ep2>;
 705                                 };
 706                         };
 707                 };
 708         };
 709
 710         eeprom@50 {
 711                 compatible = "renesas,24c02", "atmel,24c02";
 712                 reg = <0x50>;
 713                 pagesize = <16>;
 714         };
 715 };
 716
 717 &i2c6 {
 718         status = "okay";
 719         clock-frequency = <100000>;
 720
 721         pmic@58 {
 722                 compatible = "dlg,da9063";
 723                 reg = <0x58>;
 724                 interrupt-parent = <&irqc0>;
 725                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 726                 interrupt-controller;
 727
 728                 rtc {
 729                         compatible = "dlg,da9063-rtc";
 730                 };
 731
 732                 wdt {
 733                         compatible = "dlg,da9063-watchdog";
 734                 };
 735         };
 736
 737         vdd_dvfs: regulator@68 {
 738                 compatible = "dlg,da9210";
 739                 reg = <0x68>;
 740                 interrupt-parent = <&irqc0>;
 741                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 742
 743                 regulator-min-microvolt = <1000000>;
 744                 regulator-max-microvolt = <1000000>;
 745                 regulator-boot-on;
 746                 regulator-always-on;
 747         };
 748 };
 749
 750 &pci0 {
 751         status = "okay";
 752         pinctrl-0 = <&usb0_pins>;
 753         pinctrl-names = "default";
 754 };
 755
 756 &pci1 {
 757         status = "okay";
 758         pinctrl-0 = <&usb1_pins>;
 759         pinctrl-names = "default";
 760 };
 761
 762 &hsusb {
 763         status = "okay";
 764         pinctrl-0 = <&usb0_pins>;
 765         pinctrl-names = "default";
 766         renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
 767 };
 768
 769 &usbphy {
 770         status = "okay";
 771 };
 772
 773 &pcie_bus_clk {
 774         clock-frequency = <100000000>;
 775 };
 776
 777 &pciec {
 778         status = "okay";
 779 };
 780
 781 &cpu0 {
 782         cpu0-supply = <&vdd_dvfs>;
 783 };
 784
 785 /* HDMI video input */
 786 &vin0 {
 787         status = "okay";
 788         pinctrl-0 = <&vin0_pins>;
 789         pinctrl-names = "default";
 790
 791         port {
 792                 #address-cells = <1>;
 793                 #size-cells = <0>;
 794
 795                 vin0ep2: endpoint {
 796                         remote-endpoint = <&adv7612_out>;
 797                         bus-width = <24>;
 798                         hsync-active = <0>;
 799                         vsync-active = <0>;
 800                         pclk-sample = <1>;
 801                         data-active = <1>;
 802                 };
 803         };
 804 };
 805
 806 /* composite video input */
 807 &vin1 {
 808         status = "okay";
 809         pinctrl-0 = <&vin1_pins>;
 810         pinctrl-names = "default";
 811
 812         port {
 813                 #address-cells = <1>;
 814                 #size-cells = <0>;
 815
 816                 vin1ep: endpoint {
 817                         remote-endpoint = <&adv7180>;
 818                         bus-width = <8>;
 819                 };
 820         };
 821 };
 822
 823 &rcar_sound {
 824         pinctrl-0 = <&sound_pins &sound_clk_pins>;
 825         pinctrl-names = "default";
 826
 827         /* Single DAI */
 828         #sound-dai-cells = <0>;
 829
 830         status = "okay";
 831
 832         rcar_sound,dai {
 833                 dai0 {
 834                         playback = <&ssi0 &src2 &dvc0>;
 835                         capture  = <&ssi1 &src3 &dvc1>;
 836                 };
 837         };
 838 };
 839
 840 &ssi1 {
 841         shared-pin;
 842 };