arch/arm/boot/dts/r8a7790-lager.dts

   1 /*
   2  * Device Tree Source for the Lager board
   3  *
   4  * Copyright (C) 2013-2014 Renesas Solutions Corp.
   5  * Copyright (C) 2014 Cogent Embedded, Inc.
   6  * Copyright (C) 2015-2016 Renesas Electronics Corporation
   7  *
   8  * This file is licensed under the terms of the GNU General Public License
   9  * version 2.  This program is licensed "as is" without any warranty of any
  10  * kind, whether express or implied.
  11  */
  12
  13 /*
  14  * SSI-AK4643
  15  *
  16  * SW1: 1: AK4643
  17  *      2: CN22
  18  *      3: ADV7511
  19  *
  20  * This command is required when Playback/Capture
  21  *
  22  *      amixer set "LINEOUT Mixer DACL" on
  23  *      amixer set "DVC Out" 100%
  24  *      amixer set "DVC In" 100%
  25  *
  26  * You can use Mute
  27  *
  28  *      amixer set "DVC Out Mute" on
  29  *      amixer set "DVC In Mute" on
  30  *
  31  * You can use Volume Ramp
  32  *
  33  *      amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
  34  *      amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
  35  *      amixer set "DVC Out Ramp" on
  36  *      aplay xxx.wav &
  37  *      amixer set "DVC Out"  80%  // Volume Down
  38  *      amixer set "DVC Out" 100%  // Volume Up
  39  */
  40
  41 /dts-v1/;
  42 #include "r8a7790.dtsi"
  43 #include <dt-bindings/gpio/gpio.h>
  44 #include <dt-bindings/input/input.h>
  45
  46 / {
  47         model = "Lager";
  48         compatible = "renesas,lager", "renesas,r8a7790";
  49
  50         aliases {
  51                 serial0 = &scif0;
  52                 serial1 = &scifa1;
  53                 i2c8 = &gpioi2c1;
  54                 i2c10 = &i2cexio0;
  55                 i2c11 = &i2cexio1;
  56         };
  57
  58         chosen {
  59                 bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
  60                 stdout-path = "serial0:115200n8";
  61         };
  62
  63         memory@40000000 {
  64                 device_type = "memory";
  65                 reg = <0 0x40000000 0 0x40000000>;
  66         };
  67
  68         memory@140000000 {
  69                 device_type = "memory";
  70                 reg = <1 0x40000000 0 0xc0000000>;
  71         };
  72
  73         lbsc {
  74                 #address-cells = <1>;
  75                 #size-cells = <1>;
  76         };
  77
  78         keyboard {
  79                 compatible = "gpio-keys";
  80
  81                 one {
  82                         linux,code = <KEY_1>;
  83                         label = "SW2-1";
  84                         wakeup-source;
  85                         debounce-interval = <20>;
  86                         gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
  87                 };
  88                 two {
  89                         linux,code = <KEY_2>;
  90                         label = "SW2-2";
  91                         wakeup-source;
  92                         debounce-interval = <20>;
  93                         gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
  94                 };
  95                 three {
  96                         linux,code = <KEY_3>;
  97                         label = "SW2-3";
  98                         wakeup-source;
  99                         debounce-interval = <20>;
 100                         gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
 101                 };
 102                 four {
 103                         linux,code = <KEY_4>;
 104                         label = "SW2-4";
 105                         wakeup-source;
 106                         debounce-interval = <20>;
 107                         gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
 108                 };
 109         };
 110
 111         leds {
 112                 compatible = "gpio-leds";
 113                 led6 {
 114                         gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
 115                 };
 116                 led7 {
 117                         gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
 118                 };
 119                 led8 {
 120                         gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
 121                 };
 122         };
 123
 124         fixedregulator3v3: regulator-3v3 {
 125                 compatible = "regulator-fixed";
 126                 regulator-name = "fixed-3.3V";
 127                 regulator-min-microvolt = <3300000>;
 128                 regulator-max-microvolt = <3300000>;
 129                 regulator-boot-on;
 130                 regulator-always-on;
 131         };
 132
 133         vcc_sdhi0: regulator-vcc-sdhi0 {
 134                 compatible = "regulator-fixed";
 135
 136                 regulator-name = "SDHI0 Vcc";
 137                 regulator-min-microvolt = <3300000>;
 138                 regulator-max-microvolt = <3300000>;
 139
 140                 gpio = <&gpio5 24 GPIO_ACTIVE_HIGH>;
 141                 enable-active-high;
 142         };
 143
 144         vccq_sdhi0: regulator-vccq-sdhi0 {
 145                 compatible = "regulator-gpio";
 146
 147                 regulator-name = "SDHI0 VccQ";
 148                 regulator-min-microvolt = <1800000>;
 149                 regulator-max-microvolt = <3300000>;
 150
 151                 gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
 152                 gpios-states = <1>;
 153                 states = <3300000 1
 154                           1800000 0>;
 155         };
 156
 157         vcc_sdhi2: regulator-vcc-sdhi2 {
 158                 compatible = "regulator-fixed";
 159
 160                 regulator-name = "SDHI2 Vcc";
 161                 regulator-min-microvolt = <3300000>;
 162                 regulator-max-microvolt = <3300000>;
 163
 164                 gpio = <&gpio5 25 GPIO_ACTIVE_HIGH>;
 165                 enable-active-high;
 166         };
 167
 168         vccq_sdhi2: regulator-vccq-sdhi2 {
 169                 compatible = "regulator-gpio";
 170
 171                 regulator-name = "SDHI2 VccQ";
 172                 regulator-min-microvolt = <1800000>;
 173                 regulator-max-microvolt = <3300000>;
 174
 175                 gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>;
 176                 gpios-states = <1>;
 177                 states = <3300000 1
 178                           1800000 0>;
 179         };
 180
 181         audio_clock: audio_clock {
 182                 compatible = "fixed-clock";
 183                 #clock-cells = <0>;
 184                 clock-frequency = <11289600>;
 185         };
 186
 187         rsnd_ak4643: sound {
 188                 compatible = "simple-audio-card";
 189
 190                 simple-audio-card,format = "left_j";
 191                 simple-audio-card,bitclock-master = <&sndcodec>;
 192                 simple-audio-card,frame-master = <&sndcodec>;
 193
 194                 sndcpu: simple-audio-card,cpu {
 195                         sound-dai = <&rcar_sound>;
 196                 };
 197
 198                 sndcodec: simple-audio-card,codec {
 199                         sound-dai = <&ak4643>;
 200                         clocks = <&audio_clock>;
 201                 };
 202         };
 203
 204         vga-encoder {
 205                 compatible = "adi,adv7123";
 206
 207                 ports {
 208                         #address-cells = <1>;
 209                         #size-cells = <0>;
 210
 211                         port@0 {
 212                                 reg = <0>;
 213                                 adv7123_in: endpoint {
 214                                         remote-endpoint = <&du_out_rgb>;
 215                                 };
 216                         };
 217                         port@1 {
 218                                 reg = <1>;
 219                                 adv7123_out: endpoint {
 220                                         remote-endpoint = <&vga_in>;
 221                                 };
 222                         };
 223                 };
 224         };
 225
 226         vga {
 227                 compatible = "vga-connector";
 228
 229                 port {
 230                         vga_in: endpoint {
 231                                 remote-endpoint = <&adv7123_out>;
 232                         };
 233                 };
 234         };
 235
 236         hdmi-in {
 237                 compatible = "hdmi-connector";
 238                 type = "a";
 239
 240                 port {
 241                         hdmi_con_in: endpoint {
 242                                 remote-endpoint = <&adv7612_in>;
 243                         };
 244                 };
 245         };
 246
 247         hdmi-out {
 248                 compatible = "hdmi-connector";
 249                 type = "a";
 250
 251                 port {
 252                         hdmi_con_out: endpoint {
 253                                 remote-endpoint = <&adv7511_out>;
 254                         };
 255                 };
 256         };
 257
 258         x2_clk: x2-clock {
 259                 compatible = "fixed-clock";
 260                 #clock-cells = <0>;
 261                 clock-frequency = <148500000>;
 262         };
 263
 264         x13_clk: x13-clock {
 265                 compatible = "fixed-clock";
 266                 #clock-cells = <0>;
 267                 clock-frequency = <148500000>;
 268         };
 269
 270         gpioi2c1: i2c-8 {
 271                 #address-cells = <1>;
 272                 #size-cells = <0>;
 273                 compatible = "i2c-gpio";
 274                 status = "disabled";
 275                 gpios = <&gpio1 17 GPIO_ACTIVE_HIGH /* sda */
 276                          &gpio1 16 GPIO_ACTIVE_HIGH /* scl */
 277                         >;
 278                 i2c-gpio,delay-us = <5>;
 279         };
 280
 281         /*
 282          * IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only.
 283          * We use the I2C demuxer, so the desired IP core can be selected at runtime
 284          * depending on the use case (e.g. DMA with IIC0 or slave support with I2C0).
 285          * Note: For testing the I2C slave feature, it is convenient to connect this
 286          * bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and
 287          * instantiate the slave device at runtime according to the documentation.
 288          * You can then communicate with the slave via IIC3.
 289          *
 290          * IIC0/I2C0 does not appear to support fallback to GPIO.
 291          */
 292         i2cexio0: i2c-10 {
 293                 compatible = "i2c-demux-pinctrl";
 294                 i2c-parent = <&iic0>, <&i2c0>;
 295                 i2c-bus-name = "i2c-exio0";
 296                 #address-cells = <1>;
 297                 #size-cells = <0>;
 298         };
 299
 300         /*
 301          * IIC1/I2C1 is routed to EXIO connector A, pins 78 (SCL) + 80 (SDA).
 302          * This is similar to the arangement described for i2cexio0 (above)
 303          * with a fallback to GPIO also provided.
 304          */
 305         i2cexio1: i2c-11 {
 306                 compatible = "i2c-demux-pinctrl";
 307                 i2c-parent = <&iic1>, <&i2c1>, <&gpioi2c1>;
 308                 i2c-bus-name = "i2c-exio1";
 309                 #address-cells = <1>;
 310                 #size-cells = <0>;
 311         };
 312 };
 313
 314 &du {
 315         pinctrl-0 = <&du_pins>;
 316         pinctrl-names = "default";
 317         status = "okay";
 318
 319         clocks = <&mstp7_clks R8A7790_CLK_DU0>,
 320                  <&mstp7_clks R8A7790_CLK_DU1>,
 321                  <&mstp7_clks R8A7790_CLK_DU2>,
 322                  <&mstp7_clks R8A7790_CLK_LVDS0>,
 323                  <&mstp7_clks R8A7790_CLK_LVDS1>,
 324                  <&x13_clk>, <&x2_clk>;
 325         clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1",
 326                       "dclkin.0", "dclkin.1";
 327
 328         ports {
 329                 port@0 {
 330                         endpoint {
 331                                 remote-endpoint = <&adv7123_in>;
 332                         };
 333                 };
 334                 port@1 {
 335                         endpoint {
 336                                 remote-endpoint = <&adv7511_in>;
 337                         };
 338                 };
 339                 port@2 {
 340                         lvds_connector: endpoint {
 341                         };
 342                 };
 343         };
 344 };
 345
 346 &extal_clk {
 347         clock-frequency = <20000000>;
 348 };
 349
 350 &pfc {
 351         pinctrl-0 = <&scif_clk_pins>;
 352         pinctrl-names = "default";
 353
 354         du_pins: du {
 355                 groups = "du_rgb666", "du_sync_1", "du_clk_out_0";
 356                 function = "du";
 357         };
 358
 359         scif0_pins: scif0 {
 360                 groups = "scif0_data";
 361                 function = "scif0";
 362         };
 363
 364         scif_clk_pins: scif_clk {
 365                 groups = "scif_clk";
 366                 function = "scif_clk";
 367         };
 368
 369         ether_pins: ether {
 370                 groups = "eth_link", "eth_mdio", "eth_rmii";
 371                 function = "eth";
 372         };
 373
 374         phy1_pins: phy1 {
 375                 groups = "intc_irq0";
 376                 function = "intc";
 377         };
 378
 379         scifa1_pins: scifa1 {
 380                 groups = "scifa1_data";
 381                 function = "scifa1";
 382         };
 383
 384         sdhi0_pins: sd0 {
 385                 groups = "sdhi0_data4", "sdhi0_ctrl";
 386                 function = "sdhi0";
 387                 power-source = <3300>;
 388         };
 389
 390         sdhi0_pins_uhs: sd0_uhs {
 391                 groups = "sdhi0_data4", "sdhi0_ctrl";
 392                 function = "sdhi0";
 393                 power-source = <1800>;
 394         };
 395
 396         sdhi2_pins: sd2 {
 397                 groups = "sdhi2_data4", "sdhi2_ctrl";
 398                 function = "sdhi2";
 399                 power-source = <3300>;
 400         };
 401
 402         sdhi2_pins_uhs: sd2_uhs {
 403                 groups = "sdhi2_data4", "sdhi2_ctrl";
 404                 function = "sdhi2";
 405                 power-source = <1800>;
 406         };
 407
 408         mmc1_pins: mmc1 {
 409                 groups = "mmc1_data8", "mmc1_ctrl";
 410                 function = "mmc1";
 411         };
 412
 413         qspi_pins: qspi {
 414                 groups = "qspi_ctrl", "qspi_data4";
 415                 function = "qspi";
 416         };
 417
 418         msiof1_pins: msiof1 {
 419                 groups = "msiof1_clk", "msiof1_sync", "msiof1_rx",
 420                                  "msiof1_tx";
 421                 function = "msiof1";
 422         };
 423
 424         i2c0_pins: i2c0 {
 425                 groups = "i2c0";
 426                 function = "i2c0";
 427         };
 428
 429         iic0_pins: iic0 {
 430                 groups = "iic0";
 431                 function = "iic0";
 432         };
 433
 434         i2c1_pins: i2c1 {
 435                 groups = "i2c1";
 436                 function = "i2c1";
 437         };
 438
 439         iic1_pins: iic1 {
 440                 groups = "iic1";
 441                 function = "iic1";
 442         };
 443
 444         iic2_pins: iic2 {
 445                 groups = "iic2";
 446                 function = "iic2";
 447         };
 448
 449         iic3_pins: iic3 {
 450                 groups = "iic3";
 451                 function = "iic3";
 452         };
 453
 454         hsusb_pins: hsusb {
 455                 groups = "usb0_ovc_vbus";
 456                 function = "usb0";
 457         };
 458
 459         usb0_pins: usb0 {
 460                 groups = "usb0";
 461                 function = "usb0";
 462         };
 463
 464         usb1_pins: usb1 {
 465                 groups = "usb1";
 466                 function = "usb1";
 467         };
 468
 469         usb2_pins: usb2 {
 470                 groups = "usb2";
 471                 function = "usb2";
 472         };
 473
 474         vin0_pins: vin0 {
 475                 groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
 476                 function = "vin0";
 477         };
 478
 479         vin1_pins: vin1 {
 480                 groups = "vin1_data8", "vin1_clk";
 481                 function = "vin1";
 482         };
 483
 484         sound_pins: sound {
 485                 groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
 486                 function = "ssi";
 487         };
 488
 489         sound_clk_pins: sound_clk {
 490                 groups = "audio_clk_a";
 491                 function = "audio_clk";
 492         };
 493 };
 494
 495 &ether {
 496         pinctrl-0 = <&ether_pins &phy1_pins>;
 497         pinctrl-names = "default";
 498
 499         phy-handle = <&phy1>;
 500         renesas,ether-link-active-low;
 501         status = "okay";
 502
 503         phy1: ethernet-phy@1 {
 504                 reg = <1>;
 505                 interrupt-parent = <&irqc0>;
 506                 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 507                 micrel,led-mode = <1>;
 508         };
 509 };
 510
 511 &cmt0 {
 512         status = "okay";
 513 };
 514
 515 &mmcif1 {
 516         pinctrl-0 = <&mmc1_pins>;
 517         pinctrl-names = "default";
 518
 519         vmmc-supply = <&fixedregulator3v3>;
 520         bus-width = <8>;
 521         non-removable;
 522         status = "okay";
 523 };
 524
 525 &sata1 {
 526         status = "okay";
 527 };
 528
 529 &qspi {
 530         pinctrl-0 = <&qspi_pins>;
 531         pinctrl-names = "default";
 532
 533         status = "okay";
 534
 535         flash: flash@0 {
 536                 compatible = "spansion,s25fl512s", "jedec,spi-nor";
 537                 reg = <0>;
 538                 spi-max-frequency = <30000000>;
 539                 spi-tx-bus-width = <4>;
 540                 spi-rx-bus-width = <4>;
 541                 spi-cpha;
 542                 spi-cpol;
 543                 m25p,fast-read;
 544
 545                 partitions {
 546                         compatible = "fixed-partitions";
 547                         #address-cells = <1>;
 548                         #size-cells = <1>;
 549
 550                         partition@0 {
 551                                 label = "loader";
 552                                 reg = <0x00000000 0x00040000>;
 553                                 read-only;
 554                         };
 555                         partition@40000 {
 556                                 label = "user";
 557                                 reg = <0x00040000 0x00400000>;
 558                                 read-only;
 559                         };
 560                         partition@440000 {
 561                                 label = "flash";
 562                                 reg = <0x00440000 0x03bc0000>;
 563                         };
 564                 };
 565         };
 566 };
 567
 568 &scif0 {
 569         pinctrl-0 = <&scif0_pins>;
 570         pinctrl-names = "default";
 571
 572         status = "okay";
 573 };
 574
 575 &scifa1 {
 576         pinctrl-0 = <&scifa1_pins>;
 577         pinctrl-names = "default";
 578
 579         status = "okay";
 580 };
 581
 582 &scif_clk {
 583         clock-frequency = <14745600>;
 584         status = "okay";
 585 };
 586
 587 &msiof1 {
 588         pinctrl-0 = <&msiof1_pins>;
 589         pinctrl-names = "default";
 590
 591         status = "okay";
 592
 593         pmic: pmic@0 {
 594                 compatible = "renesas,r2a11302ft";
 595                 reg = <0>;
 596                 spi-max-frequency = <6000000>;
 597                 spi-cpol;
 598                 spi-cpha;
 599         };
 600 };
 601
 602 &sdhi0 {
 603         pinctrl-0 = <&sdhi0_pins>;
 604         pinctrl-1 = <&sdhi0_pins_uhs>;
 605         pinctrl-names = "default", "state_uhs";
 606
 607         vmmc-supply = <&vcc_sdhi0>;
 608         vqmmc-supply = <&vccq_sdhi0>;
 609         cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
 610         sd-uhs-sdr50;
 611         sd-uhs-sdr104;
 612         status = "okay";
 613 };
 614
 615 &sdhi2 {
 616         pinctrl-0 = <&sdhi2_pins>;
 617         pinctrl-1 = <&sdhi2_pins_uhs>;
 618         pinctrl-names = "default", "state_uhs";
 619
 620         vmmc-supply = <&vcc_sdhi2>;
 621         vqmmc-supply = <&vccq_sdhi2>;
 622         cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
 623         sd-uhs-sdr50;
 624         status = "okay";
 625 };
 626
 627 &cpu0 {
 628         cpu0-supply = <&vdd_dvfs>;
 629 };
 630
 631 &i2c0   {
 632         pinctrl-0 = <&i2c0_pins>;
 633         pinctrl-names = "i2c-exio0";
 634 };
 635
 636 &iic0   {
 637         pinctrl-0 = <&iic0_pins>;
 638         pinctrl-names = "i2c-exio0";
 639 };
 640
 641 &i2c1   {
 642         pinctrl-0 = <&i2c1_pins>;
 643         pinctrl-names = "i2c-exio1";
 644 };
 645
 646 &iic1   {
 647         pinctrl-0 = <&iic1_pins>;
 648         pinctrl-names = "i2c-exio1";
 649 };
 650
 651 &iic2   {
 652         status = "okay";
 653         pinctrl-0 = <&iic2_pins>;
 654         pinctrl-names = "default";
 655
 656         clock-frequency = <100000>;
 657
 658         ak4643: codec@12 {
 659                 compatible = "asahi-kasei,ak4643";
 660                 #sound-dai-cells = <0>;
 661                 reg = <0x12>;
 662         };
 663
 664         composite-in@20 {
 665                 compatible = "adi,adv7180";
 666                 reg = <0x20>;
 667                 remote = <&vin1>;
 668
 669                 port {
 670                         adv7180: endpoint {
 671                                 bus-width = <8>;
 672                                 remote-endpoint = <&vin1ep0>;
 673                         };
 674                 };
 675         };
 676
 677         hdmi@39 {
 678                 compatible = "adi,adv7511w";
 679                 reg = <0x39>;
 680                 interrupt-parent = <&gpio1>;
 681                 interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
 682
 683                 adi,input-depth = <8>;
 684                 adi,input-colorspace = "rgb";
 685                 adi,input-clock = "1x";
 686                 adi,input-style = <1>;
 687                 adi,input-justification = "evenly";
 688
 689                 ports {
 690                         #address-cells = <1>;
 691                         #size-cells = <0>;
 692
 693                         port@0 {
 694                                 reg = <0>;
 695                                 adv7511_in: endpoint {
 696                                         remote-endpoint = <&du_out_lvds0>;
 697                                 };
 698                         };
 699
 700                         port@1 {
 701                                 reg = <1>;
 702                                 adv7511_out: endpoint {
 703                                         remote-endpoint = <&hdmi_con_out>;
 704                                 };
 705                         };
 706                 };
 707         };
 708
 709         hdmi-in@4c {
 710                 compatible = "adi,adv7612";
 711                 reg = <0x4c>;
 712                 interrupt-parent = <&gpio1>;
 713                 interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
 714                 default-input = <0>;
 715
 716                 ports {
 717                         #address-cells = <1>;
 718                         #size-cells = <0>;
 719
 720                         port@0 {
 721                                 reg = <0>;
 722                                 adv7612_in: endpoint {
 723                                         remote-endpoint = <&hdmi_con_in>;
 724                                 };
 725                         };
 726
 727                         port@2 {
 728                                 reg = <2>;
 729                                 adv7612_out: endpoint {
 730                                         remote-endpoint = <&vin0ep2>;
 731                                 };
 732                         };
 733                 };
 734         };
 735 };
 736
 737 &iic3 {
 738         pinctrl-names = "default";
 739         pinctrl-0 = <&iic3_pins>;
 740         status = "okay";
 741
 742         pmic@58 {
 743                 compatible = "dlg,da9063";
 744                 reg = <0x58>;
 745                 interrupt-parent = <&irqc0>;
 746                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 747                 interrupt-controller;
 748
 749                 rtc {
 750                         compatible = "dlg,da9063-rtc";
 751                 };
 752
 753                 wdt {
 754                         compatible = "dlg,da9063-watchdog";
 755                 };
 756         };
 757
 758         vdd_dvfs: regulator@68 {
 759                 compatible = "dlg,da9210";
 760                 reg = <0x68>;
 761                 interrupt-parent = <&irqc0>;
 762                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 763
 764                 regulator-min-microvolt = <1000000>;
 765                 regulator-max-microvolt = <1000000>;
 766                 regulator-boot-on;
 767                 regulator-always-on;
 768         };
 769 };
 770
 771 &pci0 {
 772         status = "okay";
 773         pinctrl-0 = <&usb0_pins>;
 774         pinctrl-names = "default";
 775 };
 776
 777 &pci1 {
 778         status = "okay";
 779         pinctrl-0 = <&usb1_pins>;
 780         pinctrl-names = "default";
 781 };
 782
 783 &xhci {
 784         status = "okay";
 785         pinctrl-0 = <&usb2_pins>;
 786         pinctrl-names = "default";
 787 };
 788
 789 &pci2 {
 790         status = "okay";
 791         pinctrl-0 = <&usb2_pins>;
 792         pinctrl-names = "default";
 793 };
 794
 795 &hsusb {
 796         status = "okay";
 797         pinctrl-0 = <&hsusb_pins>;
 798         pinctrl-names = "default";
 799         renesas,enable-gpio = <&gpio5 18 GPIO_ACTIVE_HIGH>;
 800 };
 801
 802 &usbphy {
 803         status = "okay";
 804 };
 805
 806 /* HDMI video input */
 807 &vin0 {
 808         pinctrl-0 = <&vin0_pins>;
 809         pinctrl-names = "default";
 810
 811         status = "okay";
 812
 813         port {
 814                 vin0ep2: endpoint {
 815                         remote-endpoint = <&adv7612_out>;
 816                         bus-width = <24>;
 817                         hsync-active = <0>;
 818                         vsync-active = <0>;
 819                         pclk-sample = <1>;
 820                         data-active = <1>;
 821                 };
 822         };
 823 };
 824
 825 /* composite video input */
 826 &vin1 {
 827         pinctrl-0 = <&vin1_pins>;
 828         pinctrl-names = "default";
 829
 830         status = "okay";
 831
 832         port {
 833                 #address-cells = <1>;
 834                 #size-cells = <0>;
 835
 836                 vin1ep0: endpoint {
 837                         remote-endpoint = <&adv7180>;
 838                         bus-width = <8>;
 839                 };
 840         };
 841 };
 842
 843 &rcar_sound {
 844         pinctrl-0 = <&sound_pins &sound_clk_pins>;
 845         pinctrl-names = "default";
 846
 847         /* Single DAI */
 848         #sound-dai-cells = <0>;
 849
 850         status = "okay";
 851
 852         rcar_sound,dai {
 853                 dai0 {
 854                         playback = <&ssi0 &src2 &dvc0>;
 855                         capture  = <&ssi1 &src3 &dvc1>;
 856                 };
 857         };
 858 };
 859
 860 &ssi1 {
 861         shared-pin;
 862 };