arch/arm/boot/dts/r8a7790-lager.dts

   1 /*
   2  * Device Tree Source for the Lager board
   3  *
   4  * Copyright (C) 2013-2014 Renesas Solutions Corp.
   5  * Copyright (C) 2014 Cogent Embedded, Inc.
   6  * Copyright (C) 2015-2016 Renesas Electronics Corporation
   7  *
   8  * This file is licensed under the terms of the GNU General Public License
   9  * version 2.  This program is licensed "as is" without any warranty of any
  10  * kind, whether express or implied.
  11  */
  12
  13 /*
  14  * SSI-AK4643
  15  *
  16  * SW1: 1: AK4643
  17  *      2: CN22
  18  *      3: ADV7511
  19  *
  20  * This command is required when Playback/Capture
  21  *
  22  *      amixer set "LINEOUT Mixer DACL" on
  23  *      amixer set "DVC Out" 100%
  24  *      amixer set "DVC In" 100%
  25  *
  26  * You can use Mute
  27  *
  28  *      amixer set "DVC Out Mute" on
  29  *      amixer set "DVC In Mute" on
  30  *
  31  * You can use Volume Ramp
  32  *
  33  *      amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
  34  *      amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
  35  *      amixer set "DVC Out Ramp" on
  36  *      aplay xxx.wav &
  37  *      amixer set "DVC Out"  80%  // Volume Down
  38  *      amixer set "DVC Out" 100%  // Volume Up
  39  */
  40
  41 /dts-v1/;
  42 #include "r8a7790.dtsi"
  43 #include <dt-bindings/gpio/gpio.h>
  44 #include <dt-bindings/input/input.h>
  45
  46 / {
  47         model = "Lager";
  48         compatible = "renesas,lager", "renesas,r8a7790";
  49
  50         aliases {
  51                 serial0 = &scif0;
  52                 serial1 = &scifa1;
  53                 i2c8 = &gpioi2c1;
  54                 i2c9 = &gpioi2c2;
  55                 i2c10 = &i2cexio0;
  56                 i2c11 = &i2cexio1;
  57                 i2c12 = &i2chdmi;
  58                 i2c13 = &i2cpwr;
  59         };
  60
  61         chosen {
  62                 bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
  63                 stdout-path = "serial0:115200n8";
  64         };
  65
  66         memory@40000000 {
  67                 device_type = "memory";
  68                 reg = <0 0x40000000 0 0x40000000>;
  69         };
  70
  71         memory@140000000 {
  72                 device_type = "memory";
  73                 reg = <1 0x40000000 0 0xc0000000>;
  74         };
  75
  76         lbsc {
  77                 #address-cells = <1>;
  78                 #size-cells = <1>;
  79         };
  80
  81         keyboard {
  82                 compatible = "gpio-keys";
  83
  84                 one {
  85                         linux,code = <KEY_1>;
  86                         label = "SW2-1";
  87                         wakeup-source;
  88                         debounce-interval = <20>;
  89                         gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
  90                 };
  91                 two {
  92                         linux,code = <KEY_2>;
  93                         label = "SW2-2";
  94                         wakeup-source;
  95                         debounce-interval = <20>;
  96                         gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
  97                 };
  98                 three {
  99                         linux,code = <KEY_3>;
 100                         label = "SW2-3";
 101                         wakeup-source;
 102                         debounce-interval = <20>;
 103                         gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
 104                 };
 105                 four {
 106                         linux,code = <KEY_4>;
 107                         label = "SW2-4";
 108                         wakeup-source;
 109                         debounce-interval = <20>;
 110                         gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
 111                 };
 112         };
 113
 114         leds {
 115                 compatible = "gpio-leds";
 116                 led6 {
 117                         gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
 118                 };
 119                 led7 {
 120                         gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
 121                 };
 122                 led8 {
 123                         gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
 124                 };
 125         };
 126
 127         fixedregulator3v3: regulator-3v3 {
 128                 compatible = "regulator-fixed";
 129                 regulator-name = "fixed-3.3V";
 130                 regulator-min-microvolt = <3300000>;
 131                 regulator-max-microvolt = <3300000>;
 132                 regulator-boot-on;
 133                 regulator-always-on;
 134         };
 135
 136         vcc_sdhi0: regulator-vcc-sdhi0 {
 137                 compatible = "regulator-fixed";
 138
 139                 regulator-name = "SDHI0 Vcc";
 140                 regulator-min-microvolt = <3300000>;
 141                 regulator-max-microvolt = <3300000>;
 142
 143                 gpio = <&gpio5 24 GPIO_ACTIVE_HIGH>;
 144                 enable-active-high;
 145         };
 146
 147         vccq_sdhi0: regulator-vccq-sdhi0 {
 148                 compatible = "regulator-gpio";
 149
 150                 regulator-name = "SDHI0 VccQ";
 151                 regulator-min-microvolt = <1800000>;
 152                 regulator-max-microvolt = <3300000>;
 153
 154                 gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
 155                 gpios-states = <1>;
 156                 states = <3300000 1
 157                           1800000 0>;
 158         };
 159
 160         vcc_sdhi2: regulator-vcc-sdhi2 {
 161                 compatible = "regulator-fixed";
 162
 163                 regulator-name = "SDHI2 Vcc";
 164                 regulator-min-microvolt = <3300000>;
 165                 regulator-max-microvolt = <3300000>;
 166
 167                 gpio = <&gpio5 25 GPIO_ACTIVE_HIGH>;
 168                 enable-active-high;
 169         };
 170
 171         vccq_sdhi2: regulator-vccq-sdhi2 {
 172                 compatible = "regulator-gpio";
 173
 174                 regulator-name = "SDHI2 VccQ";
 175                 regulator-min-microvolt = <1800000>;
 176                 regulator-max-microvolt = <3300000>;
 177
 178                 gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>;
 179                 gpios-states = <1>;
 180                 states = <3300000 1
 181                           1800000 0>;
 182         };
 183
 184         audio_clock: audio_clock {
 185                 compatible = "fixed-clock";
 186                 #clock-cells = <0>;
 187                 clock-frequency = <11289600>;
 188         };
 189
 190         rsnd_ak4643: sound {
 191                 compatible = "simple-audio-card";
 192
 193                 simple-audio-card,format = "left_j";
 194                 simple-audio-card,bitclock-master = <&sndcodec>;
 195                 simple-audio-card,frame-master = <&sndcodec>;
 196
 197                 sndcpu: simple-audio-card,cpu {
 198                         sound-dai = <&rcar_sound>;
 199                 };
 200
 201                 sndcodec: simple-audio-card,codec {
 202                         sound-dai = <&ak4643>;
 203                         clocks = <&audio_clock>;
 204                 };
 205         };
 206
 207         vga-encoder {
 208                 compatible = "adi,adv7123";
 209
 210                 ports {
 211                         #address-cells = <1>;
 212                         #size-cells = <0>;
 213
 214                         port@0 {
 215                                 reg = <0>;
 216                                 adv7123_in: endpoint {
 217                                         remote-endpoint = <&du_out_rgb>;
 218                                 };
 219                         };
 220                         port@1 {
 221                                 reg = <1>;
 222                                 adv7123_out: endpoint {
 223                                         remote-endpoint = <&vga_in>;
 224                                 };
 225                         };
 226                 };
 227         };
 228
 229         vga {
 230                 compatible = "vga-connector";
 231
 232                 port {
 233                         vga_in: endpoint {
 234                                 remote-endpoint = <&adv7123_out>;
 235                         };
 236                 };
 237         };
 238
 239         hdmi-in {
 240                 compatible = "hdmi-connector";
 241                 type = "a";
 242
 243                 port {
 244                         hdmi_con_in: endpoint {
 245                                 remote-endpoint = <&adv7612_in>;
 246                         };
 247                 };
 248         };
 249
 250         cec_clock: cec-clock {
 251                 compatible = "fixed-clock";
 252                 #clock-cells = <0>;
 253                 clock-frequency = <12000000>;
 254         };
 255
 256         hdmi-out {
 257                 compatible = "hdmi-connector";
 258                 type = "a";
 259
 260                 port {
 261                         hdmi_con_out: endpoint {
 262                                 remote-endpoint = <&adv7511_out>;
 263                         };
 264                 };
 265         };
 266
 267         x2_clk: x2-clock {
 268                 compatible = "fixed-clock";
 269                 #clock-cells = <0>;
 270                 clock-frequency = <148500000>;
 271         };
 272
 273         x13_clk: x13-clock {
 274                 compatible = "fixed-clock";
 275                 #clock-cells = <0>;
 276                 clock-frequency = <148500000>;
 277         };
 278
 279         gpioi2c1: i2c-8 {
 280                 #address-cells = <1>;
 281                 #size-cells = <0>;
 282                 compatible = "i2c-gpio";
 283                 status = "disabled";
 284                 scl-gpios = <&gpio1 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 285                 sda-gpios = <&gpio1 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 286                 i2c-gpio,delay-us = <5>;
 287         };
 288
 289         gpioi2c2: i2c-9 {
 290                 #address-cells = <1>;
 291                 #size-cells = <0>;
 292                 compatible = "i2c-gpio";
 293                 status = "disabled";
 294                 scl-gpios = <&gpio5 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 295                 sda-gpios = <&gpio5 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 296                 i2c-gpio,delay-us = <5>;
 297         };
 298
 299         /*
 300          * IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only.
 301          * We use the I2C demuxer, so the desired IP core can be selected at runtime
 302          * depending on the use case (e.g. DMA with IIC0 or slave support with I2C0).
 303          * Note: For testing the I2C slave feature, it is convenient to connect this
 304          * bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and
 305          * instantiate the slave device at runtime according to the documentation.
 306          * You can then communicate with the slave via IIC3.
 307          *
 308          * IIC0/I2C0 does not appear to support fallback to GPIO.
 309          */
 310         i2cexio0: i2c-10 {
 311                 compatible = "i2c-demux-pinctrl";
 312                 i2c-parent = <&iic0>, <&i2c0>;
 313                 i2c-bus-name = "i2c-exio0";
 314                 #address-cells = <1>;
 315                 #size-cells = <0>;
 316         };
 317
 318         /*
 319          * IIC1/I2C1 is routed to EXIO connector A, pins 78 (SCL) + 80 (SDA).
 320          * This is similar to the arangement described for i2cexio0 (above)
 321          * with a fallback to GPIO also provided.
 322          */
 323         i2cexio1: i2c-11 {
 324                 compatible = "i2c-demux-pinctrl";
 325                 i2c-parent = <&iic1>, <&i2c1>, <&gpioi2c1>;
 326                 i2c-bus-name = "i2c-exio1";
 327                 #address-cells = <1>;
 328                 #size-cells = <0>;
 329         };
 330
 331         /*
 332          * IIC2 and I2C2 may be switched using pinmux.
 333          * A fallback to GPIO is also provided.
 334          */
 335         i2chdmi: i2c-12 {
 336                 compatible = "i2c-demux-pinctrl";
 337                 i2c-parent = <&iic2>, <&i2c2>, <&gpioi2c2>;
 338                 i2c-bus-name = "i2c-hdmi";
 339                 #address-cells = <1>;
 340                 #size-cells = <0>;
 341
 342                 ak4643: codec@12 {
 343                         compatible = "asahi-kasei,ak4643";
 344                         #sound-dai-cells = <0>;
 345                         reg = <0x12>;
 346                 };
 347
 348                 composite-in@20 {
 349                         compatible = "adi,adv7180";
 350                         reg = <0x20>;
 351                         remote = <&vin1>;
 352
 353                         port {
 354                                 adv7180: endpoint {
 355                                         bus-width = <8>;
 356                                         remote-endpoint = <&vin1ep0>;
 357                                 };
 358                         };
 359                 };
 360
 361                 hdmi@39 {
 362                         compatible = "adi,adv7511w";
 363                         reg = <0x39>;
 364                         interrupt-parent = <&gpio1>;
 365                         interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
 366                         clocks = <&cec_clock>;
 367                         clock-names = "cec";
 368
 369                         adi,input-depth = <8>;
 370                         adi,input-colorspace = "rgb";
 371                         adi,input-clock = "1x";
 372                         adi,input-style = <1>;
 373                         adi,input-justification = "evenly";
 374
 375                         ports {
 376                                 #address-cells = <1>;
 377                                 #size-cells = <0>;
 378
 379                                 port@0 {
 380                                         reg = <0>;
 381                                         adv7511_in: endpoint {
 382                                                 remote-endpoint = <&lvds0_out>;
 383                                         };
 384                                 };
 385
 386                                 port@1 {
 387                                         reg = <1>;
 388                                         adv7511_out: endpoint {
 389                                                 remote-endpoint = <&hdmi_con_out>;
 390                                         };
 391                                 };
 392                         };
 393                 };
 394
 395                 hdmi-in@4c {
 396                         compatible = "adi,adv7612";
 397                         reg = <0x4c>;
 398                         interrupt-parent = <&gpio1>;
 399                         interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
 400                         default-input = <0>;
 401
 402                         ports {
 403                                 #address-cells = <1>;
 404                                 #size-cells = <0>;
 405
 406                                 port@0 {
 407                                         reg = <0>;
 408                                         adv7612_in: endpoint {
 409                                                 remote-endpoint = <&hdmi_con_in>;
 410                                         };
 411                                 };
 412
 413                                 port@2 {
 414                                         reg = <2>;
 415                                         adv7612_out: endpoint {
 416                                                 remote-endpoint = <&vin0ep2>;
 417                                         };
 418                                 };
 419                         };
 420                 };
 421         };
 422
 423         /*
 424          * IIC3 and I2C3 may be switched using pinmux.
 425          * IIC3/I2C3 does not appear to support fallback to GPIO.
 426          */
 427         i2cpwr: i2c-13 {
 428                 compatible = "i2c-demux-pinctrl";
 429                 i2c-parent = <&iic3>, <&i2c3>;
 430                 i2c-bus-name = "i2c-pwr";
 431                 #address-cells = <1>;
 432                 #size-cells = <0>;
 433
 434                 pmic@58 {
 435                         compatible = "dlg,da9063";
 436                         reg = <0x58>;
 437                         interrupt-parent = <&irqc0>;
 438                         interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 439                         interrupt-controller;
 440
 441                         rtc {
 442                                 compatible = "dlg,da9063-rtc";
 443                         };
 444
 445                         wdt {
 446                                 compatible = "dlg,da9063-watchdog";
 447                         };
 448                 };
 449
 450                 vdd_dvfs: regulator@68 {
 451                         compatible = "dlg,da9210";
 452                         reg = <0x68>;
 453                         interrupt-parent = <&irqc0>;
 454                         interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 455
 456                         regulator-min-microvolt = <1000000>;
 457                         regulator-max-microvolt = <1000000>;
 458                         regulator-boot-on;
 459                         regulator-always-on;
 460                 };
 461         };
 462 };
 463
 464 &du {
 465         pinctrl-0 = <&du_pins>;
 466         pinctrl-names = "default";
 467         status = "okay";
 468
 469         clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>,
 470                  <&x13_clk>, <&x2_clk>;
 471         clock-names = "du.0", "du.1", "du.2", "dclkin.0", "dclkin.1";
 472
 473         ports {
 474                 port@0 {
 475                         endpoint {
 476                                 remote-endpoint = <&adv7123_in>;
 477                         };
 478                 };
 479         };
 480 };
 481
 482 &lvds0 {
 483         status = "okay";
 484
 485         ports {
 486                 port@1 {
 487                         endpoint {
 488                                 remote-endpoint = <&adv7511_in>;
 489                         };
 490                 };
 491         };
 492 };
 493
 494 &lvds1 {
 495         status = "okay";
 496
 497         ports {
 498                 port@1 {
 499                         lvds_connector: endpoint {
 500                         };
 501                 };
 502         };
 503 };
 504
 505 &extal_clk {
 506         clock-frequency = <20000000>;
 507 };
 508
 509 &pfc {
 510         pinctrl-0 = <&scif_clk_pins>;
 511         pinctrl-names = "default";
 512
 513         du_pins: du {
 514                 groups = "du_rgb666", "du_sync_1", "du_clk_out_0";
 515                 function = "du";
 516         };
 517
 518         scif0_pins: scif0 {
 519                 groups = "scif0_data";
 520                 function = "scif0";
 521         };
 522
 523         scif_clk_pins: scif_clk {
 524                 groups = "scif_clk";
 525                 function = "scif_clk";
 526         };
 527
 528         ether_pins: ether {
 529                 groups = "eth_link", "eth_mdio", "eth_rmii";
 530                 function = "eth";
 531         };
 532
 533         phy1_pins: phy1 {
 534                 groups = "intc_irq0";
 535                 function = "intc";
 536         };
 537
 538         scifa1_pins: scifa1 {
 539                 groups = "scifa1_data";
 540                 function = "scifa1";
 541         };
 542
 543         sdhi0_pins: sd0 {
 544                 groups = "sdhi0_data4", "sdhi0_ctrl";
 545                 function = "sdhi0";
 546                 power-source = <3300>;
 547         };
 548
 549         sdhi0_pins_uhs: sd0_uhs {
 550                 groups = "sdhi0_data4", "sdhi0_ctrl";
 551                 function = "sdhi0";
 552                 power-source = <1800>;
 553         };
 554
 555         sdhi2_pins: sd2 {
 556                 groups = "sdhi2_data4", "sdhi2_ctrl";
 557                 function = "sdhi2";
 558                 power-source = <3300>;
 559         };
 560
 561         sdhi2_pins_uhs: sd2_uhs {
 562                 groups = "sdhi2_data4", "sdhi2_ctrl";
 563                 function = "sdhi2";
 564                 power-source = <1800>;
 565         };
 566
 567         mmc1_pins: mmc1 {
 568                 groups = "mmc1_data8", "mmc1_ctrl";
 569                 function = "mmc1";
 570         };
 571
 572         qspi_pins: qspi {
 573                 groups = "qspi_ctrl", "qspi_data4";
 574                 function = "qspi";
 575         };
 576
 577         msiof1_pins: msiof1 {
 578                 groups = "msiof1_clk", "msiof1_sync", "msiof1_rx",
 579                                  "msiof1_tx";
 580                 function = "msiof1";
 581         };
 582
 583         i2c0_pins: i2c0 {
 584                 groups = "i2c0";
 585                 function = "i2c0";
 586         };
 587
 588         iic0_pins: iic0 {
 589                 groups = "iic0";
 590                 function = "iic0";
 591         };
 592
 593         i2c1_pins: i2c1 {
 594                 groups = "i2c1";
 595                 function = "i2c1";
 596         };
 597
 598         iic1_pins: iic1 {
 599                 groups = "iic1";
 600                 function = "iic1";
 601         };
 602
 603         i2c2_pins: i2c2 {
 604                 groups = "i2c2";
 605                 function = "i2c2";
 606         };
 607
 608         iic2_pins: iic2 {
 609                 groups = "iic2";
 610                 function = "iic2";
 611         };
 612
 613         i2c3_pins: i2c3 {
 614                 groups = "i2c3";
 615                 function = "i2c3";
 616         };
 617
 618         iic3_pins: iic3 {
 619                 groups = "iic3";
 620                 function = "iic3";
 621         };
 622
 623         hsusb_pins: hsusb {
 624                 groups = "usb0_ovc_vbus";
 625                 function = "usb0";
 626         };
 627
 628         usb0_pins: usb0 {
 629                 groups = "usb0";
 630                 function = "usb0";
 631         };
 632
 633         usb1_pins: usb1 {
 634                 groups = "usb1";
 635                 function = "usb1";
 636         };
 637
 638         usb2_pins: usb2 {
 639                 groups = "usb2";
 640                 function = "usb2";
 641         };
 642
 643         vin0_pins: vin0 {
 644                 groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
 645                 function = "vin0";
 646         };
 647
 648         vin1_pins: vin1 {
 649                 groups = "vin1_data8", "vin1_clk";
 650                 function = "vin1";
 651         };
 652
 653         sound_pins: sound {
 654                 groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
 655                 function = "ssi";
 656         };
 657
 658         sound_clk_pins: sound_clk {
 659                 groups = "audio_clk_a";
 660                 function = "audio_clk";
 661         };
 662 };
 663
 664 &ether {
 665         pinctrl-0 = <&ether_pins &phy1_pins>;
 666         pinctrl-names = "default";
 667
 668         phy-handle = <&phy1>;
 669         renesas,ether-link-active-low;
 670         status = "okay";
 671
 672         phy1: ethernet-phy@1 {
 673                 reg = <1>;
 674                 interrupt-parent = <&irqc0>;
 675                 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 676                 micrel,led-mode = <1>;
 677         };
 678 };
 679
 680 &cmt0 {
 681         status = "okay";
 682 };
 683
 684 &mmcif1 {
 685         pinctrl-0 = <&mmc1_pins>;
 686         pinctrl-names = "default";
 687
 688         vmmc-supply = <&fixedregulator3v3>;
 689         bus-width = <8>;
 690         non-removable;
 691         status = "okay";
 692 };
 693
 694 &sata1 {
 695         status = "okay";
 696 };
 697
 698 &qspi {
 699         pinctrl-0 = <&qspi_pins>;
 700         pinctrl-names = "default";
 701
 702         status = "okay";
 703
 704         flash: flash@0 {
 705                 compatible = "spansion,s25fl512s", "jedec,spi-nor";
 706                 reg = <0>;
 707                 spi-max-frequency = <30000000>;
 708                 spi-tx-bus-width = <4>;
 709                 spi-rx-bus-width = <4>;
 710                 spi-cpha;
 711                 spi-cpol;
 712                 m25p,fast-read;
 713
 714                 partitions {
 715                         compatible = "fixed-partitions";
 716                         #address-cells = <1>;
 717                         #size-cells = <1>;
 718
 719                         partition@0 {
 720                                 label = "loader";
 721                                 reg = <0x00000000 0x00040000>;
 722                                 read-only;
 723                         };
 724                         partition@40000 {
 725                                 label = "user";
 726                                 reg = <0x00040000 0x00400000>;
 727                                 read-only;
 728                         };
 729                         partition@440000 {
 730                                 label = "flash";
 731                                 reg = <0x00440000 0x03bc0000>;
 732                         };
 733                 };
 734         };
 735 };
 736
 737 &scif0 {
 738         pinctrl-0 = <&scif0_pins>;
 739         pinctrl-names = "default";
 740
 741         status = "okay";
 742 };
 743
 744 &scifa1 {
 745         pinctrl-0 = <&scifa1_pins>;
 746         pinctrl-names = "default";
 747
 748         status = "okay";
 749 };
 750
 751 &scif_clk {
 752         clock-frequency = <14745600>;
 753 };
 754
 755 &msiof1 {
 756         pinctrl-0 = <&msiof1_pins>;
 757         pinctrl-names = "default";
 758
 759         status = "okay";
 760
 761         pmic: pmic@0 {
 762                 compatible = "renesas,r2a11302ft";
 763                 reg = <0>;
 764                 spi-max-frequency = <6000000>;
 765                 spi-cpol;
 766                 spi-cpha;
 767         };
 768 };
 769
 770 &sdhi0 {
 771         pinctrl-0 = <&sdhi0_pins>;
 772         pinctrl-1 = <&sdhi0_pins_uhs>;
 773         pinctrl-names = "default", "state_uhs";
 774
 775         vmmc-supply = <&vcc_sdhi0>;
 776         vqmmc-supply = <&vccq_sdhi0>;
 777         cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
 778         sd-uhs-sdr50;
 779         sd-uhs-sdr104;
 780         status = "okay";
 781 };
 782
 783 &sdhi2 {
 784         pinctrl-0 = <&sdhi2_pins>;
 785         pinctrl-1 = <&sdhi2_pins_uhs>;
 786         pinctrl-names = "default", "state_uhs";
 787
 788         vmmc-supply = <&vcc_sdhi2>;
 789         vqmmc-supply = <&vccq_sdhi2>;
 790         cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
 791         sd-uhs-sdr50;
 792         status = "okay";
 793 };
 794
 795 &cpu0 {
 796         cpu0-supply = <&vdd_dvfs>;
 797 };
 798
 799 &i2c0   {
 800         pinctrl-0 = <&i2c0_pins>;
 801         pinctrl-names = "i2c-exio0";
 802 };
 803
 804 &iic0   {
 805         pinctrl-0 = <&iic0_pins>;
 806         pinctrl-names = "i2c-exio0";
 807 };
 808
 809 &i2c1   {
 810         pinctrl-0 = <&i2c1_pins>;
 811         pinctrl-names = "i2c-exio1";
 812 };
 813
 814 &iic1   {
 815         pinctrl-0 = <&iic1_pins>;
 816         pinctrl-names = "i2c-exio1";
 817 };
 818
 819 &i2c2   {
 820         pinctrl-0 = <&i2c2_pins>;
 821         pinctrl-names = "i2c-hdmi";
 822
 823         clock-frequency = <100000>;
 824 };
 825
 826 &iic2   {
 827         pinctrl-0 = <&iic2_pins>;
 828         pinctrl-names = "i2c-hdmi";
 829
 830         clock-frequency = <100000>;
 831 };
 832
 833 &i2c3   {
 834         pinctrl-0 = <&i2c3_pins>;
 835         pinctrl-names = "i2c-pwr";
 836 };
 837
 838 &iic3   {
 839         pinctrl-0 = <&iic3_pins>;
 840         pinctrl-names = "i2c-pwr";
 841 };
 842
 843 &pci0 {
 844         status = "okay";
 845         pinctrl-0 = <&usb0_pins>;
 846         pinctrl-names = "default";
 847 };
 848
 849 &pci1 {
 850         status = "okay";
 851         pinctrl-0 = <&usb1_pins>;
 852         pinctrl-names = "default";
 853 };
 854
 855 &xhci {
 856         status = "okay";
 857         pinctrl-0 = <&usb2_pins>;
 858         pinctrl-names = "default";
 859 };
 860
 861 &pci2 {
 862         status = "okay";
 863         pinctrl-0 = <&usb2_pins>;
 864         pinctrl-names = "default";
 865 };
 866
 867 &hsusb {
 868         status = "okay";
 869         pinctrl-0 = <&hsusb_pins>;
 870         pinctrl-names = "default";
 871         renesas,enable-gpio = <&gpio5 18 GPIO_ACTIVE_HIGH>;
 872 };
 873
 874 &usbphy {
 875         status = "okay";
 876 };
 877
 878 /* HDMI video input */
 879 &vin0 {
 880         pinctrl-0 = <&vin0_pins>;
 881         pinctrl-names = "default";
 882
 883         status = "okay";
 884
 885         port {
 886                 vin0ep2: endpoint {
 887                         remote-endpoint = <&adv7612_out>;
 888                         bus-width = <24>;
 889                         hsync-active = <0>;
 890                         vsync-active = <0>;
 891                         pclk-sample = <1>;
 892                         data-active = <1>;
 893                 };
 894         };
 895 };
 896
 897 /* composite video input */
 898 &vin1 {
 899         pinctrl-0 = <&vin1_pins>;
 900         pinctrl-names = "default";
 901
 902         status = "okay";
 903
 904         port {
 905                 vin1ep0: endpoint {
 906                         remote-endpoint = <&adv7180>;
 907                         bus-width = <8>;
 908                 };
 909         };
 910 };
 911
 912 &rcar_sound {
 913         pinctrl-0 = <&sound_pins &sound_clk_pins>;
 914         pinctrl-names = "default";
 915
 916         /* Single DAI */
 917         #sound-dai-cells = <0>;
 918
 919         status = "okay";
 920
 921         rcar_sound,dai {
 922                 dai0 {
 923                         playback = <&ssi0 &src2 &dvc0>;
 924                         capture  = <&ssi1 &src3 &dvc1>;
 925                 };
 926         };
 927 };
 928
 929 &rwdt {
 930         timeout-sec = <60>;
 931         status = "okay";
 932 };
 933
 934 &ssi1 {
 935         shared-pin;
 936 };