arch/arm/boot/dts/qcom-msm8960.dtsi

   1 /dts-v1/;
   2
   3 /include/ "skeleton.dtsi"
   4
   5 #include <dt-bindings/interrupt-controller/arm-gic.h>
   6 #include <dt-bindings/clock/qcom,gcc-msm8960.h>
   7 #include <dt-bindings/soc/qcom,gsbi.h>
   8
   9 / {
  10         model = "Qualcomm MSM8960";
  11         compatible = "qcom,msm8960";
  12         interrupt-parent = <&intc>;
  13
  14         cpus {
  15                 #address-cells = <1>;
  16                 #size-cells = <0>;
  17                 interrupts = <1 14 0x304>;
  18
  19                 cpu@0 {
  20                         compatible = "qcom,krait";
  21                         enable-method = "qcom,kpss-acc-v1";
  22                         device_type = "cpu";
  23                         reg = <0>;
  24                         next-level-cache = <&L2>;
  25                         qcom,acc = <&acc0>;
  26                         qcom,saw = <&saw0>;
  27                 };
  28
  29                 cpu@1 {
  30                         compatible = "qcom,krait";
  31                         enable-method = "qcom,kpss-acc-v1";
  32                         device_type = "cpu";
  33                         reg = <1>;
  34                         next-level-cache = <&L2>;
  35                         qcom,acc = <&acc1>;
  36                         qcom,saw = <&saw1>;
  37                 };
  38
  39                 L2: l2-cache {
  40                         compatible = "cache";
  41                         cache-level = <2>;
  42                 };
  43         };
  44
  45         cpu-pmu {
  46                 compatible = "qcom,krait-pmu";
  47                 interrupts = <1 10 0x304>;
  48                 qcom,no-pc-write;
  49         };
  50
  51         soc: soc {
  52                 #address-cells = <1>;
  53                 #size-cells = <1>;
  54                 ranges;
  55                 compatible = "simple-bus";
  56
  57                 intc: interrupt-controller@2000000 {
  58                         compatible = "qcom,msm-qgic2";
  59                         interrupt-controller;
  60                         #interrupt-cells = <3>;
  61                         reg = <0x02000000 0x1000>,
  62                               <0x02002000 0x1000>;
  63                 };
  64
  65                 timer@200a000 {
  66                         compatible = "qcom,kpss-timer", "qcom,msm-timer";
  67                         interrupts = <1 1 0x301>,
  68                                      <1 2 0x301>,
  69                                      <1 3 0x301>;
  70                         reg = <0x0200a000 0x100>;
  71                         clock-frequency = <27000000>,
  72                                           <32768>;
  73                         cpu-offset = <0x80000>;
  74                 };
  75
  76                 msmgpio: gpio@800000 {
  77                         compatible = "qcom,msm-gpio";
  78                         gpio-controller;
  79                         #gpio-cells = <2>;
  80                         ngpio = <150>;
  81                         interrupts = <0 16 0x4>;
  82                         interrupt-controller;
  83                         #interrupt-cells = <2>;
  84                         reg = <0x800000 0x4000>;
  85                 };
  86
  87                 gcc: clock-controller@900000 {
  88                         compatible = "qcom,gcc-msm8960";
  89                         #clock-cells = <1>;
  90                         #reset-cells = <1>;
  91                         reg = <0x900000 0x4000>;
  92                 };
  93
  94                 clock-controller@4000000 {
  95                         compatible = "qcom,mmcc-msm8960";
  96                         reg = <0x4000000 0x1000>;
  97                         #clock-cells = <1>;
  98                         #reset-cells = <1>;
  99                 };
 100
 101                 acc0: clock-controller@2088000 {
 102                         compatible = "qcom,kpss-acc-v1";
 103                         reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
 104                 };
 105
 106                 acc1: clock-controller@2098000 {
 107                         compatible = "qcom,kpss-acc-v1";
 108                         reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
 109                 };
 110
 111                 saw0: regulator@2089000 {
 112                         compatible = "qcom,saw2";
 113                         reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
 114                         regulator;
 115                 };
 116
 117                 saw1: regulator@2099000 {
 118                         compatible = "qcom,saw2";
 119                         reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
 120                         regulator;
 121                 };
 122
 123                 gsbi5: gsbi@16400000 {
 124                         compatible = "qcom,gsbi-v1.0.0";
 125                         reg = <0x16400000 0x100>;
 126                         clocks = <&gcc GSBI5_H_CLK>;
 127                         clock-names = "iface";
 128                         #address-cells = <1>;
 129                         #size-cells = <1>;
 130                         ranges;
 131
 132                         serial@16440000 {
 133                                 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 134                                 reg = <0x16440000 0x1000>,
 135                                       <0x16400000 0x1000>;
 136                                 interrupts = <0 154 0x0>;
 137                                 clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
 138                                 clock-names = "core", "iface";
 139                                 status = "disabled";
 140                         };
 141                 };
 142
 143                 qcom,ssbi@500000 {
 144                         compatible = "qcom,ssbi";
 145                         reg = <0x500000 0x1000>;
 146                         qcom,controller-type = "pmic-arbiter";
 147
 148                         pmicintc: pmic@0 {
 149                                 compatible = "qcom,pm8921";
 150                                 interrupt-parent = <&msmgpio>;
 151                                 interrupts = <104 8>;
 152                                 #interrupt-cells = <2>;
 153                                 interrupt-controller;
 154                                 #address-cells = <1>;
 155                                 #size-cells = <0>;
 156
 157                                 pwrkey@1c {
 158                                         compatible = "qcom,pm8921-pwrkey";
 159                                         reg = <0x1c>;
 160                                         interrupt-parent = <&pmicintc>;
 161                                         interrupts = <50 1>, <51 1>;
 162                                         debounce = <15625>;
 163                                         pull-up;
 164                                 };
 165
 166                                 keypad@148 {
 167                                         compatible = "qcom,pm8921-keypad";
 168                                         reg = <0x148>;
 169                                         interrupt-parent = <&pmicintc>;
 170                                         interrupts = <74 1>, <75 1>;
 171                                         debounce = <15>;
 172                                         scan-delay = <32>;
 173                                         row-hold = <91500>;
 174                                 };
 175
 176                                 rtc@11d {
 177                                         compatible = "qcom,pm8921-rtc";
 178                                         interrupt-parent = <&pmicintc>;
 179                                         interrupts = <39 1>;
 180                                         reg = <0x11d>;
 181                                         allow-set-time;
 182                                 };
 183                         };
 184                 };
 185
 186                 rng@1a500000 {
 187                         compatible = "qcom,prng";
 188                         reg = <0x1a500000 0x200>;
 189                         clocks = <&gcc PRNG_CLK>;
 190                         clock-names = "core";
 191                 };
 192
 193                 /* Temporary fixed regulator */
 194                 vsdcc_fixed: vsdcc-regulator {
 195                         compatible = "regulator-fixed";
 196                         regulator-name = "SDCC Power";
 197                         regulator-min-microvolt = <2700000>;
 198                         regulator-max-microvolt = <2700000>;
 199                         regulator-always-on;
 200                 };
 201
 202                 amba {
 203                         compatible = "arm,amba-bus";
 204                         #address-cells = <1>;
 205                         #size-cells = <1>;
 206                         ranges;
 207                         sdcc1: sdcc@12400000 {
 208                                 status          = "disabled";
 209                                 compatible      = "arm,pl18x", "arm,primecell";
 210                                 arm,primecell-periphid = <0x00051180>;
 211                                 reg             = <0x12400000 0x8000>;
 212                                 interrupts      = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
 213                                 interrupt-names = "cmd_irq";
 214                                 clocks          = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
 215                                 clock-names     = "mclk", "apb_pclk";
 216                                 bus-width       = <8>;
 217                                 max-frequency   = <96000000>;
 218                                 non-removable;
 219                                 cap-sd-highspeed;
 220                                 cap-mmc-highspeed;
 221                                 vmmc-supply = <&vsdcc_fixed>;
 222                         };
 223
 224                         sdcc3: sdcc@12180000 {
 225                                 compatible      = "arm,pl18x", "arm,primecell";
 226                                 arm,primecell-periphid = <0x00051180>;
 227                                 status          = "disabled";
 228                                 reg             = <0x12180000 0x8000>;
 229                                 interrupts      = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
 230                                 interrupt-names = "cmd_irq";
 231                                 clocks          = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
 232                                 clock-names     = "mclk", "apb_pclk";
 233                                 bus-width       = <4>;
 234                                 cap-sd-highspeed;
 235                                 cap-mmc-highspeed;
 236                                 max-frequency   = <192000000>;
 237                                 no-1-8-v;
 238                                 vmmc-supply = <&vsdcc_fixed>;
 239                         };
 240                 };
 241         };
 242 };