arch/arm/boot/dts/qcom-msm8660.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 /dts-v1/;
   3
   4 #include <dt-bindings/interrupt-controller/irq.h>
   5 #include <dt-bindings/interrupt-controller/arm-gic.h>
   6 #include <dt-bindings/clock/qcom,gcc-msm8660.h>
   7 #include <dt-bindings/soc/qcom,gsbi.h>
   8
   9 / {
  10         #address-cells = <1>;
  11         #size-cells = <1>;
  12         model = "Qualcomm MSM8660";
  13         compatible = "qcom,msm8660";
  14         interrupt-parent = <&intc>;
  15
  16         cpus {
  17                 #address-cells = <1>;
  18                 #size-cells = <0>;
  19
  20                 cpu@0 {
  21                         compatible = "qcom,scorpion";
  22                         enable-method = "qcom,gcc-msm8660";
  23                         device_type = "cpu";
  24                         reg = <0>;
  25                         next-level-cache = <&L2>;
  26                 };
  27
  28                 cpu@1 {
  29                         compatible = "qcom,scorpion";
  30                         enable-method = "qcom,gcc-msm8660";
  31                         device_type = "cpu";
  32                         reg = <1>;
  33                         next-level-cache = <&L2>;
  34                 };
  35
  36                 L2: l2-cache {
  37                         compatible = "cache";
  38                         cache-level = <2>;
  39                 };
  40         };
  41
  42         memory {
  43                 device_type = "memory";
  44                 reg = <0x0 0x0>;
  45         };
  46
  47         cpu-pmu {
  48                 compatible = "qcom,scorpion-mp-pmu";
  49                 interrupts = <1 9 0x304>;
  50         };
  51
  52         clocks {
  53                 cxo_board {
  54                         compatible = "fixed-clock";
  55                         #clock-cells = <0>;
  56                         clock-frequency = <19200000>;
  57                 };
  58
  59                 pxo_board {
  60                         compatible = "fixed-clock";
  61                         #clock-cells = <0>;
  62                         clock-frequency = <27000000>;
  63                 };
  64
  65                 sleep_clk {
  66                         compatible = "fixed-clock";
  67                         #clock-cells = <0>;
  68                         clock-frequency = <32768>;
  69                 };
  70         };
  71
  72         /*
  73          * These channels from the ADC are simply hardware monitors.
  74          * That is why the ADC is referred to as "HKADC" - HouseKeeping
  75          * ADC.
  76          */
  77         iio-hwmon {
  78                 compatible = "iio-hwmon";
  79                 io-channels = <&xoadc 0x00 0x01>, /* Battery */
  80                             <&xoadc 0x00 0x02>, /* DC in (charger) */
  81                             <&xoadc 0x00 0x04>, /* VPH the main system voltage */
  82                             <&xoadc 0x00 0x0b>, /* Die temperature */
  83                             <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
  84                             <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
  85                             <&xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
  86         };
  87
  88         soc: soc {
  89                 #address-cells = <1>;
  90                 #size-cells = <1>;
  91                 ranges;
  92                 compatible = "simple-bus";
  93
  94                 intc: interrupt-controller@2080000 {
  95                         compatible = "qcom,msm-8660-qgic";
  96                         interrupt-controller;
  97                         #interrupt-cells = <3>;
  98                         reg = < 0x02080000 0x1000 >,
  99                               < 0x02081000 0x1000 >;
 100                 };
 101
 102                 timer@2000000 {
 103                         compatible = "qcom,scss-timer", "qcom,msm-timer";
 104                         interrupts = <1 0 0x301>,
 105                                      <1 1 0x301>,
 106                                      <1 2 0x301>;
 107                         reg = <0x02000000 0x100>;
 108                         clock-frequency = <27000000>,
 109                                           <32768>;
 110                         cpu-offset = <0x40000>;
 111                 };
 112
 113                 tlmm: pinctrl@800000 {
 114                         compatible = "qcom,msm8660-pinctrl";
 115                         reg = <0x800000 0x4000>;
 116
 117                         gpio-controller;
 118                         #gpio-cells = <2>;
 119                         interrupts = <0 16 0x4>;
 120                         interrupt-controller;
 121                         #interrupt-cells = <2>;
 122
 123                 };
 124
 125                 gcc: clock-controller@900000 {
 126                         compatible = "qcom,gcc-msm8660";
 127                         #clock-cells = <1>;
 128                         #reset-cells = <1>;
 129                         reg = <0x900000 0x4000>;
 130                 };
 131
 132                 gsbi6: gsbi@16500000 {
 133                         compatible = "qcom,gsbi-v1.0.0";
 134                         cell-index = <12>;
 135                         reg = <0x16500000 0x100>;
 136                         clocks = <&gcc GSBI6_H_CLK>;
 137                         clock-names = "iface";
 138                         #address-cells = <1>;
 139                         #size-cells = <1>;
 140                         ranges;
 141                         status = "disabled";
 142
 143                         syscon-tcsr = <&tcsr>;
 144
 145                         gsbi6_serial: serial@16540000 {
 146                                 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 147                                 reg = <0x16540000 0x1000>,
 148                                       <0x16500000 0x1000>;
 149                                 interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
 150                                 clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>;
 151                                 clock-names = "core", "iface";
 152                                 status = "disabled";
 153                         };
 154
 155                         gsbi6_i2c: i2c@16580000 {
 156                                 compatible = "qcom,i2c-qup-v1.1.1";
 157                                 reg = <0x16580000 0x1000>;
 158                                 interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
 159                                 clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>;
 160                                 clock-names = "core", "iface";
 161                                 #address-cells = <1>;
 162                                 #size-cells = <0>;
 163                                 status = "disabled";
 164                         };
 165                 };
 166
 167                 gsbi7: gsbi@16600000 {
 168                         compatible = "qcom,gsbi-v1.0.0";
 169                         cell-index = <12>;
 170                         reg = <0x16600000 0x100>;
 171                         clocks = <&gcc GSBI7_H_CLK>;
 172                         clock-names = "iface";
 173                         #address-cells = <1>;
 174                         #size-cells = <1>;
 175                         ranges;
 176                         status = "disabled";
 177
 178                         syscon-tcsr = <&tcsr>;
 179
 180                         gsbi7_serial: serial@16640000 {
 181                                 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 182                                 reg = <0x16640000 0x1000>,
 183                                       <0x16600000 0x1000>;
 184                                 interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
 185                                 clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
 186                                 clock-names = "core", "iface";
 187                                 status = "disabled";
 188                         };
 189
 190                         gsbi7_i2c: i2c@16680000 {
 191                                 compatible = "qcom,i2c-qup-v1.1.1";
 192                                 reg = <0x16680000 0x1000>;
 193                                 interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
 194                                 clocks = <&gcc GSBI7_QUP_CLK>, <&gcc GSBI7_H_CLK>;
 195                                 clock-names = "core", "iface";
 196                                 #address-cells = <1>;
 197                                 #size-cells = <0>;
 198                                 status = "disabled";
 199                         };
 200                 };
 201
 202                 gsbi8: gsbi@19800000 {
 203                         compatible = "qcom,gsbi-v1.0.0";
 204                         cell-index = <12>;
 205                         reg = <0x19800000 0x100>;
 206                         clocks = <&gcc GSBI8_H_CLK>;
 207                         clock-names = "iface";
 208                         #address-cells = <1>;
 209                         #size-cells = <1>;
 210                         ranges;
 211
 212                         syscon-tcsr = <&tcsr>;
 213
 214                         gsbi8_i2c: i2c@19880000 {
 215                                 compatible = "qcom,i2c-qup-v1.1.1";
 216                                 reg = <0x19880000 0x1000>;
 217                                 interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
 218                                 clocks = <&gcc GSBI8_QUP_CLK>, <&gcc GSBI8_H_CLK>;
 219                                 clock-names = "core", "iface";
 220                                 #address-cells = <1>;
 221                                 #size-cells = <0>;
 222                                 status = "disabled";
 223                         };
 224                 };
 225
 226                 gsbi12: gsbi@19c00000 {
 227                         compatible = "qcom,gsbi-v1.0.0";
 228                         cell-index = <12>;
 229                         reg = <0x19c00000 0x100>;
 230                         clocks = <&gcc GSBI12_H_CLK>;
 231                         clock-names = "iface";
 232                         #address-cells = <1>;
 233                         #size-cells = <1>;
 234                         ranges;
 235
 236                         syscon-tcsr = <&tcsr>;
 237
 238                         gsbi12_serial: serial@19c40000 {
 239                                 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 240                                 reg = <0x19c40000 0x1000>,
 241                                       <0x19c00000 0x1000>;
 242                                 interrupts = <0 195 IRQ_TYPE_LEVEL_HIGH>;
 243                                 clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>;
 244                                 clock-names = "core", "iface";
 245                                 status = "disabled";
 246                         };
 247
 248                         gsbi12_i2c: i2c@19c80000 {
 249                                 compatible = "qcom,i2c-qup-v1.1.1";
 250                                 reg = <0x19c80000 0x1000>;
 251                                 interrupts = <0 196 IRQ_TYPE_LEVEL_HIGH>;
 252                                 clocks = <&gcc GSBI12_QUP_CLK>, <&gcc GSBI12_H_CLK>;
 253                                 clock-names = "core", "iface";
 254                                 #address-cells = <1>;
 255                                 #size-cells = <0>;
 256                                 status = "disabled";
 257                         };
 258                 };
 259
 260                 external-bus@1a100000 {
 261                         compatible = "qcom,msm8660-ebi2";
 262                         #address-cells = <2>;
 263                         #size-cells = <1>;
 264                         ranges = <0 0x0 0x1a800000 0x00800000>,
 265                                  <1 0x0 0x1b000000 0x00800000>,
 266                                  <2 0x0 0x1b800000 0x00800000>,
 267                                  <3 0x0 0x1d000000 0x08000000>,
 268                                  <4 0x0 0x1c800000 0x00800000>,
 269                                  <5 0x0 0x1c000000 0x00800000>;
 270                         reg = <0x1a100000 0x1000>, <0x1a110000 0x1000>;
 271                         reg-names = "ebi2", "xmem";
 272                         clocks = <&gcc EBI2_2X_CLK>, <&gcc EBI2_CLK>;
 273                         clock-names = "ebi2x", "ebi2";
 274                         status = "disabled";
 275                 };
 276
 277                 qcom,ssbi@500000 {
 278                         compatible = "qcom,ssbi";
 279                         reg = <0x500000 0x1000>;
 280                         qcom,controller-type = "pmic-arbiter";
 281
 282                         pm8058: pmic@0 {
 283                                 compatible = "qcom,pm8058";
 284                                 interrupt-parent = <&tlmm>;
 285                                 interrupts = <88 8>;
 286                                 #interrupt-cells = <2>;
 287                                 interrupt-controller;
 288                                 #address-cells = <1>;
 289                                 #size-cells = <0>;
 290
 291                                 pm8058_gpio: gpio@150 {
 292                                         compatible = "qcom,pm8058-gpio",
 293                                                      "qcom,ssbi-gpio";
 294                                         reg = <0x150>;
 295                                         interrupt-controller;
 296                                         #interrupt-cells = <2>;
 297                                         gpio-controller;
 298                                         #gpio-cells = <2>;
 299
 300                                 };
 301
 302                                 pm8058_mpps: mpps@50 {
 303                                         compatible = "qcom,pm8058-mpp",
 304                                                      "qcom,ssbi-mpp";
 305                                         reg = <0x50>;
 306                                         gpio-controller;
 307                                         #gpio-cells = <2>;
 308                                         interrupt-parent = <&pm8058>;
 309                                         interrupts =
 310                                         <128 IRQ_TYPE_NONE>,
 311                                         <129 IRQ_TYPE_NONE>,
 312                                         <130 IRQ_TYPE_NONE>,
 313                                         <131 IRQ_TYPE_NONE>,
 314                                         <132 IRQ_TYPE_NONE>,
 315                                         <133 IRQ_TYPE_NONE>,
 316                                         <134 IRQ_TYPE_NONE>,
 317                                         <135 IRQ_TYPE_NONE>,
 318                                         <136 IRQ_TYPE_NONE>,
 319                                         <137 IRQ_TYPE_NONE>,
 320                                         <138 IRQ_TYPE_NONE>,
 321                                         <139 IRQ_TYPE_NONE>;
 322                                 };
 323
 324                                 pwrkey@1c {
 325                                         compatible = "qcom,pm8058-pwrkey";
 326                                         reg = <0x1c>;
 327                                         interrupt-parent = <&pm8058>;
 328                                         interrupts = <50 1>, <51 1>;
 329                                         debounce = <15625>;
 330                                         pull-up;
 331                                 };
 332
 333                                 keypad@148 {
 334                                         compatible = "qcom,pm8058-keypad";
 335                                         reg = <0x148>;
 336                                         interrupt-parent = <&pm8058>;
 337                                         interrupts = <74 1>, <75 1>;
 338                                         debounce = <15>;
 339                                         scan-delay = <32>;
 340                                         row-hold = <91500>;
 341                                 };
 342
 343                                 xoadc: xoadc@197 {
 344                                         compatible = "qcom,pm8058-adc";
 345                                         reg = <0x197>;
 346                                         interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>;
 347                                         #address-cells = <2>;
 348                                         #size-cells = <0>;
 349                                         #io-channel-cells = <2>;
 350
 351                                         vcoin: adc-channel@0 {
 352                                                 reg = <0x00 0x00>;
 353                                         };
 354                                         vbat: adc-channel@1 {
 355                                                 reg = <0x00 0x01>;
 356                                         };
 357                                         dcin: adc-channel@2 {
 358                                                 reg = <0x00 0x02>;
 359                                         };
 360                                         ichg: adc-channel@3 {
 361                                                 reg = <0x00 0x03>;
 362                                         };
 363                                         vph_pwr: adc-channel@4 {
 364                                                 reg = <0x00 0x04>;
 365                                         };
 366                                         usb_vbus: adc-channel@a {
 367                                                 reg = <0x00 0x0a>;
 368                                         };
 369                                         die_temp: adc-channel@b {
 370                                                 reg = <0x00 0x0b>;
 371                                         };
 372                                         ref_625mv: adc-channel@c {
 373                                                 reg = <0x00 0x0c>;
 374                                         };
 375                                         ref_1250mv: adc-channel@d {
 376                                                 reg = <0x00 0x0d>;
 377                                         };
 378                                         ref_325mv: adc-channel@e {
 379                                                 reg = <0x00 0x0e>;
 380                                         };
 381                                         ref_muxoff: adc-channel@f {
 382                                                 reg = <0x00 0x0f>;
 383                                         };
 384                                 };
 385
 386                                 rtc@1e8 {
 387                                         compatible = "qcom,pm8058-rtc";
 388                                         reg = <0x1e8>;
 389                                         interrupt-parent = <&pm8058>;
 390                                         interrupts = <39 1>;
 391                                         allow-set-time;
 392                                 };
 393
 394                                 vibrator@4a {
 395                                         compatible = "qcom,pm8058-vib";
 396                                         reg = <0x4a>;
 397                                 };
 398                         };
 399                 };
 400
 401                 l2cc: clock-controller@2082000 {
 402                         compatible      = "syscon";
 403                         reg             = <0x02082000 0x1000>;
 404                 };
 405
 406                 rpm: rpm@104000 {
 407                         compatible      = "qcom,rpm-msm8660";
 408                         reg             = <0x00104000 0x1000>;
 409                         qcom,ipc        = <&l2cc 0x8 2>;
 410
 411                         interrupts      = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
 412                                           <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
 413                                           <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
 414                         interrupt-names = "ack", "err", "wakeup";
 415                         clocks = <&gcc RPM_MSG_RAM_H_CLK>;
 416                         clock-names = "ram";
 417
 418                         rpmcc: clock-controller {
 419                                 compatible      = "qcom,rpmcc-msm8660", "qcom,rpmcc";
 420                                 #clock-cells = <1>;
 421                         };
 422
 423                         pm8901-regulators {
 424                                 compatible = "qcom,rpm-pm8901-regulators";
 425
 426                                 pm8901_l0: l0 {};
 427                                 pm8901_l1: l1 {};
 428                                 pm8901_l2: l2 {};
 429                                 pm8901_l3: l3 {};
 430                                 pm8901_l4: l4 {};
 431                                 pm8901_l5: l5 {};
 432                                 pm8901_l6: l6 {};
 433
 434                                 /* S0 and S1 Handled as SAW regulators by SPM */
 435                                 pm8901_s2: s2 {};
 436                                 pm8901_s3: s3 {};
 437                                 pm8901_s4: s4 {};
 438
 439                                 pm8901_lvs0: lvs0 {};
 440                                 pm8901_lvs1: lvs1 {};
 441                                 pm8901_lvs2: lvs2 {};
 442                                 pm8901_lvs3: lvs3 {};
 443
 444                                 pm8901_mvs: mvs {};
 445                         };
 446
 447                         pm8058-regulators {
 448                                 compatible = "qcom,rpm-pm8058-regulators";
 449
 450                                 pm8058_l0: l0 {};
 451                                 pm8058_l1: l1 {};
 452                                 pm8058_l2: l2 {};
 453                                 pm8058_l3: l3 {};
 454                                 pm8058_l4: l4 {};
 455                                 pm8058_l5: l5 {};
 456                                 pm8058_l6: l6 {};
 457                                 pm8058_l7: l7 {};
 458                                 pm8058_l8: l8 {};
 459                                 pm8058_l9: l9 {};
 460                                 pm8058_l10: l10 {};
 461                                 pm8058_l11: l11 {};
 462                                 pm8058_l12: l12 {};
 463                                 pm8058_l13: l13 {};
 464                                 pm8058_l14: l14 {};
 465                                 pm8058_l15: l15 {};
 466                                 pm8058_l16: l16 {};
 467                                 pm8058_l17: l17 {};
 468                                 pm8058_l18: l18 {};
 469                                 pm8058_l19: l19 {};
 470                                 pm8058_l20: l20 {};
 471                                 pm8058_l21: l21 {};
 472                                 pm8058_l22: l22 {};
 473                                 pm8058_l23: l23 {};
 474                                 pm8058_l24: l24 {};
 475                                 pm8058_l25: l25 {};
 476
 477                                 pm8058_s0: s0 {};
 478                                 pm8058_s1: s1 {};
 479                                 pm8058_s2: s2 {};
 480                                 pm8058_s3: s3 {};
 481                                 pm8058_s4: s4 {};
 482
 483                                 pm8058_lvs0: lvs0 {};
 484                                 pm8058_lvs1: lvs1 {};
 485
 486                                 pm8058_ncp: ncp {};
 487                         };
 488                 };
 489
 490                 amba {
 491                         compatible = "simple-bus";
 492                         #address-cells = <1>;
 493                         #size-cells = <1>;
 494                         ranges;
 495                         sdcc1: sdcc@12400000 {
 496                                 status          = "disabled";
 497                                 compatible      = "arm,pl18x", "arm,primecell";
 498                                 arm,primecell-periphid = <0x00051180>;
 499                                 reg             = <0x12400000 0x8000>;
 500                                 interrupts      = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
 501                                 interrupt-names = "cmd_irq";
 502                                 clocks          = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
 503                                 clock-names     = "mclk", "apb_pclk";
 504                                 bus-width       = <8>;
 505                                 max-frequency   = <48000000>;
 506                                 non-removable;
 507                                 cap-sd-highspeed;
 508                                 cap-mmc-highspeed;
 509                         };
 510
 511                         sdcc2: sdcc@12140000 {
 512                                 status          = "disabled";
 513                                 compatible      = "arm,pl18x", "arm,primecell";
 514                                 arm,primecell-periphid = <0x00051180>;
 515                                 reg             = <0x12140000 0x8000>;
 516                                 interrupts      = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 517                                 interrupt-names = "cmd_irq";
 518                                 clocks          = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
 519                                 clock-names     = "mclk", "apb_pclk";
 520                                 bus-width       = <8>;
 521                                 max-frequency   = <48000000>;
 522                                 cap-sd-highspeed;
 523                                 cap-mmc-highspeed;
 524                         };
 525
 526                         sdcc3: sdcc@12180000 {
 527                                 compatible      = "arm,pl18x", "arm,primecell";
 528                                 arm,primecell-periphid = <0x00051180>;
 529                                 status          = "disabled";
 530                                 reg             = <0x12180000 0x8000>;
 531                                 interrupts      = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
 532                                 interrupt-names = "cmd_irq";
 533                                 clocks          = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
 534                                 clock-names     = "mclk", "apb_pclk";
 535                                 bus-width       = <4>;
 536                                 cap-sd-highspeed;
 537                                 cap-mmc-highspeed;
 538                                 max-frequency   = <48000000>;
 539                                 no-1-8-v;
 540                         };
 541
 542                         sdcc4: sdcc@121c0000 {
 543                                 compatible      = "arm,pl18x", "arm,primecell";
 544                                 arm,primecell-periphid = <0x00051180>;
 545                                 status          = "disabled";
 546                                 reg             = <0x121c0000 0x8000>;
 547                                 interrupts      = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
 548                                 interrupt-names = "cmd_irq";
 549                                 clocks          = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
 550                                 clock-names     = "mclk", "apb_pclk";
 551                                 bus-width       = <4>;
 552                                 max-frequency   = <48000000>;
 553                                 cap-sd-highspeed;
 554                                 cap-mmc-highspeed;
 555                         };
 556
 557                         sdcc5: sdcc@12200000 {
 558                                 compatible      = "arm,pl18x", "arm,primecell";
 559                                 arm,primecell-periphid = <0x00051180>;
 560                                 status          = "disabled";
 561                                 reg             = <0x12200000 0x8000>;
 562                                 interrupts      = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
 563                                 interrupt-names = "cmd_irq";
 564                                 clocks          = <&gcc SDC5_CLK>, <&gcc SDC5_H_CLK>;
 565                                 clock-names     = "mclk", "apb_pclk";
 566                                 bus-width       = <4>;
 567                                 cap-sd-highspeed;
 568                                 cap-mmc-highspeed;
 569                                 max-frequency   = <48000000>;
 570                         };
 571                 };
 572
 573                 tcsr: syscon@1a400000 {
 574                         compatible = "qcom,tcsr-msm8660", "syscon";
 575                         reg = <0x1a400000 0x100>;
 576                 };
 577         };
 578
 579 };