arch/arm/boot/dts/qcom-ipq8064.dtsi

   1 /dts-v1/;
   2
   3 #include "skeleton.dtsi"
   4 #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
   5 #include <dt-bindings/soc/qcom,gsbi.h>
   6
   7 / {
   8         model = "Qualcomm IPQ8064";
   9         compatible = "qcom,ipq8064";
  10         interrupt-parent = <&intc>;
  11
  12         cpus {
  13                 #address-cells = <1>;
  14                 #size-cells = <0>;
  15
  16                 cpu@0 {
  17                         compatible = "qcom,krait";
  18                         enable-method = "qcom,kpss-acc-v1";
  19                         device_type = "cpu";
  20                         reg = <0>;
  21                         next-level-cache = <&L2>;
  22                         qcom,acc = <&acc0>;
  23                         qcom,saw = <&saw0>;
  24                 };
  25
  26                 cpu@1 {
  27                         compatible = "qcom,krait";
  28                         enable-method = "qcom,kpss-acc-v1";
  29                         device_type = "cpu";
  30                         reg = <1>;
  31                         next-level-cache = <&L2>;
  32                         qcom,acc = <&acc1>;
  33                         qcom,saw = <&saw1>;
  34                 };
  35
  36                 L2: l2-cache {
  37                         compatible = "cache";
  38                         cache-level = <2>;
  39                 };
  40         };
  41
  42         cpu-pmu {
  43                 compatible = "qcom,krait-pmu";
  44                 interrupts = <1 10 0x304>;
  45         };
  46
  47         reserved-memory {
  48                 #address-cells = <1>;
  49                 #size-cells = <1>;
  50                 ranges;
  51
  52                 nss@40000000 {
  53                         reg = <0x40000000 0x1000000>;
  54                         no-map;
  55                 };
  56
  57                 smem@41000000 {
  58                         reg = <0x41000000 0x200000>;
  59                         no-map;
  60                 };
  61         };
  62
  63         soc: soc {
  64                 #address-cells = <1>;
  65                 #size-cells = <1>;
  66                 ranges;
  67                 compatible = "simple-bus";
  68
  69                 qcom_pinmux: pinmux@800000 {
  70                         compatible = "qcom,ipq8064-pinctrl";
  71                         reg = <0x800000 0x4000>;
  72
  73                         gpio-controller;
  74                         #gpio-cells = <2>;
  75                         interrupt-controller;
  76                         #interrupt-cells = <2>;
  77                         interrupts = <0 32 0x4>;
  78                 };
  79
  80                 intc: interrupt-controller@2000000 {
  81                         compatible = "qcom,msm-qgic2";
  82                         interrupt-controller;
  83                         #interrupt-cells = <3>;
  84                         reg = <0x02000000 0x1000>,
  85                               <0x02002000 0x1000>;
  86                 };
  87
  88                 timer@200a000 {
  89                         compatible = "qcom,kpss-timer", "qcom,msm-timer";
  90                         interrupts = <1 1 0x301>,
  91                                      <1 2 0x301>,
  92                                      <1 3 0x301>;
  93                         reg = <0x0200a000 0x100>;
  94                         clock-frequency = <25000000>,
  95                                           <32768>;
  96                         cpu-offset = <0x80000>;
  97                 };
  98
  99                 acc0: clock-controller@2088000 {
 100                         compatible = "qcom,kpss-acc-v1";
 101                         reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
 102                 };
 103
 104                 acc1: clock-controller@2098000 {
 105                         compatible = "qcom,kpss-acc-v1";
 106                         reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
 107                 };
 108
 109                 saw0: regulator@2089000 {
 110                         compatible = "qcom,saw2";
 111                         reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
 112                         regulator;
 113                 };
 114
 115                 saw1: regulator@2099000 {
 116                         compatible = "qcom,saw2";
 117                         reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
 118                         regulator;
 119                 };
 120
 121                 gsbi2: gsbi@12480000 {
 122                         compatible = "qcom,gsbi-v1.0.0";
 123                         reg = <0x12480000 0x100>;
 124                         clocks = <&gcc GSBI2_H_CLK>;
 125                         clock-names = "iface";
 126                         #address-cells = <1>;
 127                         #size-cells = <1>;
 128                         ranges;
 129                         status = "disabled";
 130
 131                         serial@12490000 {
 132                                 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 133                                 reg = <0x12490000 0x1000>,
 134                                       <0x12480000 0x1000>;
 135                                 interrupts = <0 195 0x0>;
 136                                 clocks = <&gcc GSBI2_UART_CLK>, <&gcc GSBI2_H_CLK>;
 137                                 clock-names = "core", "iface";
 138                                 status = "disabled";
 139                         };
 140
 141                         i2c@124a0000 {
 142                                 compatible = "qcom,i2c-qup-v1.1.1";
 143                                 reg = <0x124a0000 0x1000>;
 144                                 interrupts = <0 196 0>;
 145
 146                                 clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
 147                                 clock-names = "core", "iface";
 148                                 status = "disabled";
 149
 150                                 #address-cells = <1>;
 151                                 #size-cells = <0>;
 152                         };
 153
 154                 };
 155
 156                 gsbi4: gsbi@16300000 {
 157                         compatible = "qcom,gsbi-v1.0.0";
 158                         reg = <0x16300000 0x100>;
 159                         clocks = <&gcc GSBI4_H_CLK>;
 160                         clock-names = "iface";
 161                         #address-cells = <1>;
 162                         #size-cells = <1>;
 163                         ranges;
 164                         status = "disabled";
 165
 166                         serial@16340000 {
 167                                 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 168                                 reg = <0x16340000 0x1000>,
 169                                       <0x16300000 0x1000>;
 170                                 interrupts = <0 152 0x0>;
 171                                 clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
 172                                 clock-names = "core", "iface";
 173                                 status = "disabled";
 174                         };
 175
 176                         i2c@16380000 {
 177                                 compatible = "qcom,i2c-qup-v1.1.1";
 178                                 reg = <0x16380000 0x1000>;
 179                                 interrupts = <0 153 0>;
 180
 181                                 clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>;
 182                                 clock-names = "core", "iface";
 183                                 status = "disabled";
 184
 185                                 #address-cells = <1>;
 186                                 #size-cells = <0>;
 187                         };
 188                 };
 189
 190                 gsbi5: gsbi@1a200000 {
 191                         compatible = "qcom,gsbi-v1.0.0";
 192                         reg = <0x1a200000 0x100>;
 193                         clocks = <&gcc GSBI5_H_CLK>;
 194                         clock-names = "iface";
 195                         #address-cells = <1>;
 196                         #size-cells = <1>;
 197                         ranges;
 198                         status = "disabled";
 199
 200                         serial@1a240000 {
 201                                 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 202                                 reg = <0x1a240000 0x1000>,
 203                                       <0x1a200000 0x1000>;
 204                                 interrupts = <0 154 0x0>;
 205                                 clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
 206                                 clock-names = "core", "iface";
 207                                 status = "disabled";
 208                         };
 209
 210                         i2c@1a280000 {
 211                                 compatible = "qcom,i2c-qup-v1.1.1";
 212                                 reg = <0x1a280000 0x1000>;
 213                                 interrupts = <0 155 0>;
 214
 215                                 clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
 216                                 clock-names = "core", "iface";
 217                                 status = "disabled";
 218
 219                                 #address-cells = <1>;
 220                                 #size-cells = <0>;
 221                         };
 222
 223                         spi@1a280000 {
 224                                 compatible = "qcom,spi-qup-v1.1.1";
 225                                 reg = <0x1a280000 0x1000>;
 226                                 interrupts = <0 155 0>;
 227
 228                                 clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
 229                                 clock-names = "core", "iface";
 230                                 status = "disabled";
 231
 232                                 #address-cells = <1>;
 233                                 #size-cells = <0>;
 234                         };
 235                 };
 236
 237                 qcom,ssbi@500000 {
 238                         compatible = "qcom,ssbi";
 239                         reg = <0x00500000 0x1000>;
 240                         qcom,controller-type = "pmic-arbiter";
 241                 };
 242
 243                 gcc: clock-controller@900000 {
 244                         compatible = "qcom,gcc-ipq8064";
 245                         reg = <0x00900000 0x4000>;
 246                         #clock-cells = <1>;
 247                         #reset-cells = <1>;
 248                 };
 249         };
 250 };