arch/arm/boot/dts/qcom-ipq4019.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Copyright (c) 2015, The Linux Foundation. All rights reserved.
   4  */
   5
   6 /dts-v1/;
   7
   8 #include <dt-bindings/clock/qcom,gcc-ipq4019.h>
   9 #include <dt-bindings/interrupt-controller/arm-gic.h>
  10 #include <dt-bindings/interrupt-controller/irq.h>
  11
  12 / {
  13         #address-cells = <1>;
  14         #size-cells = <1>;
  15
  16         model = "Qualcomm Technologies, Inc. IPQ4019";
  17         compatible = "qcom,ipq4019";
  18         interrupt-parent = <&intc>;
  19
  20         reserved-memory {
  21                 #address-cells = <0x1>;
  22                 #size-cells = <0x1>;
  23                 ranges;
  24
  25                 smem_region: smem@87e00000 {
  26                         reg = <0x87e00000 0x080000>;
  27                         no-map;
  28                 };
  29
  30                 tz@87e80000 {
  31                         reg = <0x87e80000 0x180000>;
  32                         no-map;
  33                 };
  34         };
  35
  36         aliases {
  37                 spi0 = &blsp1_spi1;
  38                 spi1 = &blsp1_spi2;
  39                 i2c0 = &blsp1_i2c3;
  40                 i2c1 = &blsp1_i2c4;
  41         };
  42
  43         cpus {
  44                 #address-cells = <1>;
  45                 #size-cells = <0>;
  46                 cpu@0 {
  47                         device_type = "cpu";
  48                         compatible = "arm,cortex-a7";
  49                         enable-method = "qcom,kpss-acc-v2";
  50                         next-level-cache = <&L2>;
  51                         qcom,acc = <&acc0>;
  52                         qcom,saw = <&saw0>;
  53                         reg = <0x0>;
  54                         clocks = <&gcc GCC_APPS_CLK_SRC>;
  55                         clock-frequency = <0>;
  56                         clock-latency = <256000>;
  57                         operating-points-v2 = <&cpu0_opp_table>;
  58                 };
  59
  60                 cpu@1 {
  61                         device_type = "cpu";
  62                         compatible = "arm,cortex-a7";
  63                         enable-method = "qcom,kpss-acc-v2";
  64                         next-level-cache = <&L2>;
  65                         qcom,acc = <&acc1>;
  66                         qcom,saw = <&saw1>;
  67                         reg = <0x1>;
  68                         clocks = <&gcc GCC_APPS_CLK_SRC>;
  69                         clock-frequency = <0>;
  70                         clock-latency = <256000>;
  71                         operating-points-v2 = <&cpu0_opp_table>;
  72                 };
  73
  74                 cpu@2 {
  75                         device_type = "cpu";
  76                         compatible = "arm,cortex-a7";
  77                         enable-method = "qcom,kpss-acc-v2";
  78                         next-level-cache = <&L2>;
  79                         qcom,acc = <&acc2>;
  80                         qcom,saw = <&saw2>;
  81                         reg = <0x2>;
  82                         clocks = <&gcc GCC_APPS_CLK_SRC>;
  83                         clock-frequency = <0>;
  84                         clock-latency = <256000>;
  85                         operating-points-v2 = <&cpu0_opp_table>;
  86                 };
  87
  88                 cpu@3 {
  89                         device_type = "cpu";
  90                         compatible = "arm,cortex-a7";
  91                         enable-method = "qcom,kpss-acc-v2";
  92                         next-level-cache = <&L2>;
  93                         qcom,acc = <&acc3>;
  94                         qcom,saw = <&saw3>;
  95                         reg = <0x3>;
  96                         clocks = <&gcc GCC_APPS_CLK_SRC>;
  97                         clock-frequency = <0>;
  98                         clock-latency = <256000>;
  99                         operating-points-v2 = <&cpu0_opp_table>;
 100                 };
 101
 102                 L2: l2-cache {
 103                         compatible = "cache";
 104                         cache-level = <2>;
 105                         qcom,saw = <&saw_l2>;
 106                 };
 107         };
 108
 109         cpu0_opp_table: opp_table0 {
 110                 compatible = "operating-points-v2";
 111                 opp-shared;
 112
 113                 opp-48000000 {
 114                         opp-hz = /bits/ 64 <48000000>;
 115                         clock-latency-ns = <256000>;
 116                 };
 117                 opp-200000000 {
 118                         opp-hz = /bits/ 64 <200000000>;
 119                         clock-latency-ns = <256000>;
 120                 };
 121                 opp-500000000 {
 122                         opp-hz = /bits/ 64 <500000000>;
 123                         clock-latency-ns = <256000>;
 124                 };
 125                 opp-716000000 {
 126                         opp-hz = /bits/ 64 <716000000>;
 127                         clock-latency-ns = <256000>;
 128                 };
 129         };
 130
 131         memory {
 132                 device_type = "memory";
 133                 reg = <0x0 0x0>;
 134         };
 135
 136         pmu {
 137                 compatible = "arm,cortex-a7-pmu";
 138                 interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) |
 139                                          IRQ_TYPE_LEVEL_HIGH)>;
 140         };
 141
 142         clocks {
 143                 sleep_clk: sleep_clk {
 144                         compatible = "fixed-clock";
 145                         clock-frequency = <32768>;
 146                         #clock-cells = <0>;
 147                 };
 148
 149                 xo: xo {
 150                         compatible = "fixed-clock";
 151                         clock-frequency = <48000000>;
 152                         #clock-cells = <0>;
 153                 };
 154         };
 155
 156         firmware {
 157                 scm {
 158                         compatible = "qcom,scm-ipq4019";
 159                 };
 160         };
 161
 162         timer {
 163                 compatible = "arm,armv7-timer";
 164                 interrupts = <1 2 0xf08>,
 165                              <1 3 0xf08>,
 166                              <1 4 0xf08>,
 167                              <1 1 0xf08>;
 168                 clock-frequency = <48000000>;
 169         };
 170
 171         soc {
 172                 #address-cells = <1>;
 173                 #size-cells = <1>;
 174                 ranges;
 175                 compatible = "simple-bus";
 176
 177                 intc: interrupt-controller@b000000 {
 178                         compatible = "qcom,msm-qgic2";
 179                         interrupt-controller;
 180                         #interrupt-cells = <3>;
 181                         reg = <0x0b000000 0x1000>,
 182                         <0x0b002000 0x1000>;
 183                 };
 184
 185                 gcc: clock-controller@1800000 {
 186                         compatible = "qcom,gcc-ipq4019";
 187                         #clock-cells = <1>;
 188                         #reset-cells = <1>;
 189                         reg = <0x1800000 0x60000>;
 190                 };
 191
 192                 rng@22000 {
 193                         compatible = "qcom,prng";
 194                         reg = <0x22000 0x140>;
 195                         clocks = <&gcc GCC_PRNG_AHB_CLK>;
 196                         clock-names = "core";
 197                         status = "disabled";
 198                 };
 199
 200                 tlmm: pinctrl@1000000 {
 201                         compatible = "qcom,ipq4019-pinctrl";
 202                         reg = <0x01000000 0x300000>;
 203                         gpio-controller;
 204                         #gpio-cells = <2>;
 205                         interrupt-controller;
 206                         #interrupt-cells = <2>;
 207                         interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 208                 };
 209
 210                 sdhci: sdhci@7824900 {
 211                         compatible = "qcom,sdhci-msm-v4";
 212                         reg = <0x7824900 0x11c>, <0x7824000 0x800>;
 213                         interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
 214                         interrupt-names = "hc_irq", "pwr_irq";
 215                         bus-width = <8>;
 216                         clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>,
 217                                  <&gcc GCC_DCD_XO_CLK>;
 218                         clock-names = "core", "iface", "xo";
 219                         status = "disabled";
 220                 };
 221
 222                 blsp_dma: dma@7884000 {
 223                         compatible = "qcom,bam-v1.7.0";
 224                         reg = <0x07884000 0x23000>;
 225                         interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
 226                         clocks = <&gcc GCC_BLSP1_AHB_CLK>;
 227                         clock-names = "bam_clk";
 228                         #dma-cells = <1>;
 229                         qcom,ee = <0>;
 230                         status = "disabled";
 231                 };
 232
 233                 blsp1_spi1: spi@78b5000 { /* BLSP1 QUP1 */
 234                         compatible = "qcom,spi-qup-v2.2.1";
 235                         reg = <0x78b5000 0x600>;
 236                         interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
 237                         clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
 238                                  <&gcc GCC_BLSP1_AHB_CLK>;
 239                         clock-names = "core", "iface";
 240                         #address-cells = <1>;
 241                         #size-cells = <0>;
 242                         dmas = <&blsp_dma 5>, <&blsp_dma 4>;
 243                         dma-names = "rx", "tx";
 244                         status = "disabled";
 245                 };
 246
 247                 blsp1_spi2: spi@78b6000 { /* BLSP1 QUP2 */
 248                         compatible = "qcom,spi-qup-v2.2.1";
 249                         reg = <0x78b6000 0x600>;
 250                         interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 251                         clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
 252                                 <&gcc GCC_BLSP1_AHB_CLK>;
 253                         clock-names = "core", "iface";
 254                         #address-cells = <1>;
 255                         #size-cells = <0>;
 256                         dmas = <&blsp_dma 7>, <&blsp_dma 6>;
 257                         dma-names = "rx", "tx";
 258                         status = "disabled";
 259                 };
 260
 261                 blsp1_i2c3: i2c@78b7000 { /* BLSP1 QUP3 */
 262                         compatible = "qcom,i2c-qup-v2.2.1";
 263                         reg = <0x78b7000 0x600>;
 264                         interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 265                         clocks = <&gcc GCC_BLSP1_AHB_CLK>,
 266                                  <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>;
 267                         clock-names = "iface", "core";
 268                         #address-cells = <1>;
 269                         #size-cells = <0>;
 270                         dmas = <&blsp_dma 9>, <&blsp_dma 8>;
 271                         dma-names = "rx", "tx";
 272                         status = "disabled";
 273                 };
 274
 275                 blsp1_i2c4: i2c@78b8000 { /* BLSP1 QUP4 */
 276                         compatible = "qcom,i2c-qup-v2.2.1";
 277                         reg = <0x78b8000 0x600>;
 278                         interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
 279                         clocks = <&gcc GCC_BLSP1_AHB_CLK>,
 280                                  <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
 281                         clock-names = "iface", "core";
 282                         #address-cells = <1>;
 283                         #size-cells = <0>;
 284                         dmas = <&blsp_dma 11>, <&blsp_dma 10>;
 285                         dma-names = "rx", "tx";
 286                         status = "disabled";
 287                 };
 288
 289                 cryptobam: dma@8e04000 {
 290                         compatible = "qcom,bam-v1.7.0";
 291                         reg = <0x08e04000 0x20000>;
 292                         interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
 293                         clocks = <&gcc GCC_CRYPTO_AHB_CLK>;
 294                         clock-names = "bam_clk";
 295                         #dma-cells = <1>;
 296                         qcom,ee = <1>;
 297                         qcom,controlled-remotely;
 298                         status = "disabled";
 299                 };
 300
 301                 crypto@8e3a000 {
 302                         compatible = "qcom,crypto-v5.1";
 303                         reg = <0x08e3a000 0x6000>;
 304                         clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
 305                                  <&gcc GCC_CRYPTO_AXI_CLK>,
 306                                  <&gcc GCC_CRYPTO_CLK>;
 307                         clock-names = "iface", "bus", "core";
 308                         dmas = <&cryptobam 2>, <&cryptobam 3>;
 309                         dma-names = "rx", "tx";
 310                         status = "disabled";
 311                 };
 312
 313                 acc0: clock-controller@b088000 {
 314                         compatible = "qcom,kpss-acc-v2";
 315                         reg = <0x0b088000 0x1000>, <0xb008000 0x1000>;
 316                 };
 317
 318                 acc1: clock-controller@b098000 {
 319                         compatible = "qcom,kpss-acc-v2";
 320                         reg = <0x0b098000 0x1000>, <0xb008000 0x1000>;
 321                 };
 322
 323                 acc2: clock-controller@b0a8000 {
 324                         compatible = "qcom,kpss-acc-v2";
 325                         reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>;
 326                 };
 327
 328                 acc3: clock-controller@b0b8000 {
 329                         compatible = "qcom,kpss-acc-v2";
 330                         reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>;
 331                 };
 332
 333                 saw0: regulator@b089000 {
 334                         compatible = "qcom,saw2";
 335                         reg = <0x0b089000 0x1000>, <0x0b009000 0x1000>;
 336                         regulator;
 337                 };
 338
 339                 saw1: regulator@b099000 {
 340                         compatible = "qcom,saw2";
 341                         reg = <0x0b099000 0x1000>, <0x0b009000 0x1000>;
 342                         regulator;
 343                 };
 344
 345                 saw2: regulator@b0a9000 {
 346                         compatible = "qcom,saw2";
 347                         reg = <0x0b0a9000 0x1000>, <0x0b009000 0x1000>;
 348                         regulator;
 349                 };
 350
 351                 saw3: regulator@b0b9000 {
 352                         compatible = "qcom,saw2";
 353                         reg = <0x0b0b9000 0x1000>, <0x0b009000 0x1000>;
 354                         regulator;
 355                 };
 356
 357                 saw_l2: regulator@b012000 {
 358                         compatible = "qcom,saw2";
 359                         reg = <0xb012000 0x1000>;
 360                         regulator;
 361                 };
 362
 363                 blsp1_uart1: serial@78af000 {
 364                         compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 365                         reg = <0x78af000 0x200>;
 366                         interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
 367                         status = "disabled";
 368                         clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
 369                                 <&gcc GCC_BLSP1_AHB_CLK>;
 370                         clock-names = "core", "iface";
 371                         dmas = <&blsp_dma 1>, <&blsp_dma 0>;
 372                         dma-names = "rx", "tx";
 373                 };
 374
 375                 blsp1_uart2: serial@78b0000 {
 376                         compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 377                         reg = <0x78b0000 0x200>;
 378                         interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 379                         status = "disabled";
 380                         clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
 381                                 <&gcc GCC_BLSP1_AHB_CLK>;
 382                         clock-names = "core", "iface";
 383                         dmas = <&blsp_dma 3>, <&blsp_dma 2>;
 384                         dma-names = "rx", "tx";
 385                 };
 386
 387                 watchdog@b017000 {
 388                         compatible = "qcom,kpss-wdt", "qcom,kpss-wdt-ipq4019";
 389                         reg = <0xb017000 0x40>;
 390                         clocks = <&sleep_clk>;
 391                         timeout-sec = <10>;
 392                         status = "disabled";
 393                 };
 394
 395                 restart@4ab000 {
 396                         compatible = "qcom,pshold";
 397                         reg = <0x4ab000 0x4>;
 398                 };
 399
 400                 pcie0: pci@40000000 {
 401                         compatible = "qcom,pcie-ipq4019", "snps,dw-pcie";
 402                         reg =  <0x40000000 0xf1d
 403                                 0x40000f20 0xa8
 404                                 0x80000 0x2000
 405                                 0x40100000 0x1000>;
 406                         reg-names = "dbi", "elbi", "parf", "config";
 407                         device_type = "pci";
 408                         linux,pci-domain = <0>;
 409                         bus-range = <0x00 0xff>;
 410                         num-lanes = <1>;
 411                         #address-cells = <3>;
 412                         #size-cells = <2>;
 413
 414                         ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000>,
 415                                  <0x82000000 0 0x40300000 0x40300000 0 0x00d00000>;
 416
 417                         interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
 418                         interrupt-names = "msi";
 419                         #interrupt-cells = <1>;
 420                         interrupt-map-mask = <0 0 0 0x7>;
 421                         interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
 422                                         <0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
 423                                         <0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
 424                                         <0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 425                         clocks = <&gcc GCC_PCIE_AHB_CLK>,
 426                                  <&gcc GCC_PCIE_AXI_M_CLK>,
 427                                  <&gcc GCC_PCIE_AXI_S_CLK>;
 428                         clock-names = "aux",
 429                                       "master_bus",
 430                                       "slave_bus";
 431
 432                         resets = <&gcc PCIE_AXI_M_ARES>,
 433                                  <&gcc PCIE_AXI_S_ARES>,
 434                                  <&gcc PCIE_PIPE_ARES>,
 435                                  <&gcc PCIE_AXI_M_VMIDMT_ARES>,
 436                                  <&gcc PCIE_AXI_S_XPU_ARES>,
 437                                  <&gcc PCIE_PARF_XPU_ARES>,
 438                                  <&gcc PCIE_PHY_ARES>,
 439                                  <&gcc PCIE_AXI_M_STICKY_ARES>,
 440                                  <&gcc PCIE_PIPE_STICKY_ARES>,
 441                                  <&gcc PCIE_PWR_ARES>,
 442                                  <&gcc PCIE_AHB_ARES>,
 443                                  <&gcc PCIE_PHY_AHB_ARES>;
 444                         reset-names = "axi_m",
 445                                       "axi_s",
 446                                       "pipe",
 447                                       "axi_m_vmid",
 448                                       "axi_s_xpu",
 449                                       "parf",
 450                                       "phy",
 451                                       "axi_m_sticky",
 452                                       "pipe_sticky",
 453                                       "pwr",
 454                                       "ahb",
 455                                       "phy_ahb";
 456
 457                         status = "disabled";
 458                 };
 459
 460                 qpic_bam: dma@7984000 {
 461                         compatible = "qcom,bam-v1.7.0";
 462                         reg = <0x7984000 0x1a000>;
 463                         interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
 464                         clocks = <&gcc GCC_QPIC_CLK>;
 465                         clock-names = "bam_clk";
 466                         #dma-cells = <1>;
 467                         qcom,ee = <0>;
 468                         status = "disabled";
 469                 };
 470
 471                 nand: qpic-nand@79b0000 {
 472                         compatible = "qcom,ipq4019-nand";
 473                         reg = <0x79b0000 0x1000>;
 474                         #address-cells = <1>;
 475                         #size-cells = <0>;
 476                         clocks = <&gcc GCC_QPIC_CLK>,
 477                                  <&gcc GCC_QPIC_AHB_CLK>;
 478                         clock-names = "core", "aon";
 479
 480                         dmas = <&qpic_bam 0>,
 481                                <&qpic_bam 1>,
 482                                <&qpic_bam 2>;
 483                         dma-names = "tx", "rx", "cmd";
 484                         status = "disabled";
 485
 486                         nand@0 {
 487                                 reg = <0>;
 488
 489                                 nand-ecc-strength = <4>;
 490                                 nand-ecc-step-size = <512>;
 491                                 nand-bus-width = <8>;
 492                         };
 493                 };
 494
 495                 wifi0: wifi@a000000 {
 496                         compatible = "qcom,ipq4019-wifi";
 497                         reg = <0xa000000 0x200000>;
 498                         resets = <&gcc WIFI0_CPU_INIT_RESET>,
 499                                  <&gcc WIFI0_RADIO_SRIF_RESET>,
 500                                  <&gcc WIFI0_RADIO_WARM_RESET>,
 501                                  <&gcc WIFI0_RADIO_COLD_RESET>,
 502                                  <&gcc WIFI0_CORE_WARM_RESET>,
 503                                  <&gcc WIFI0_CORE_COLD_RESET>;
 504                         reset-names = "wifi_cpu_init", "wifi_radio_srif",
 505                                       "wifi_radio_warm", "wifi_radio_cold",
 506                                       "wifi_core_warm", "wifi_core_cold";
 507                         clocks = <&gcc GCC_WCSS2G_CLK>,
 508                                  <&gcc GCC_WCSS2G_REF_CLK>,
 509                                  <&gcc GCC_WCSS2G_RTC_CLK>;
 510                         clock-names = "wifi_wcss_cmd", "wifi_wcss_ref",
 511                                       "wifi_wcss_rtc";
 512                         interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>,
 513                                      <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>,
 514                                      <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>,
 515                                      <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>,
 516                                      <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>,
 517                                      <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>,
 518                                      <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>,
 519                                      <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>,
 520                                      <GIC_SPI 40 IRQ_TYPE_EDGE_RISING>,
 521                                      <GIC_SPI 41 IRQ_TYPE_EDGE_RISING>,
 522                                      <GIC_SPI 42 IRQ_TYPE_EDGE_RISING>,
 523                                      <GIC_SPI 43 IRQ_TYPE_EDGE_RISING>,
 524                                      <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>,
 525                                      <GIC_SPI 45 IRQ_TYPE_EDGE_RISING>,
 526                                      <GIC_SPI 46 IRQ_TYPE_EDGE_RISING>,
 527                                      <GIC_SPI 47 IRQ_TYPE_EDGE_RISING>,
 528                                      <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
 529                         interrupt-names =  "msi0",  "msi1",  "msi2",  "msi3",
 530                                            "msi4",  "msi5",  "msi6",  "msi7",
 531                                            "msi8",  "msi9", "msi10", "msi11",
 532                                           "msi12", "msi13", "msi14", "msi15",
 533                                           "legacy";
 534                         status = "disabled";
 535                 };
 536
 537                 wifi1: wifi@a800000 {
 538                         compatible = "qcom,ipq4019-wifi";
 539                         reg = <0xa800000 0x200000>;
 540                         resets = <&gcc WIFI1_CPU_INIT_RESET>,
 541                                  <&gcc WIFI1_RADIO_SRIF_RESET>,
 542                                  <&gcc WIFI1_RADIO_WARM_RESET>,
 543                                  <&gcc WIFI1_RADIO_COLD_RESET>,
 544                                  <&gcc WIFI1_CORE_WARM_RESET>,
 545                                  <&gcc WIFI1_CORE_COLD_RESET>;
 546                         reset-names = "wifi_cpu_init", "wifi_radio_srif",
 547                                       "wifi_radio_warm", "wifi_radio_cold",
 548                                       "wifi_core_warm", "wifi_core_cold";
 549                         clocks = <&gcc GCC_WCSS5G_CLK>,
 550                                  <&gcc GCC_WCSS5G_REF_CLK>,
 551                                  <&gcc GCC_WCSS5G_RTC_CLK>;
 552                         clock-names = "wifi_wcss_cmd", "wifi_wcss_ref",
 553                                       "wifi_wcss_rtc";
 554                         interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>,
 555                                      <GIC_SPI 49 IRQ_TYPE_EDGE_RISING>,
 556                                      <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>,
 557                                      <GIC_SPI 51 IRQ_TYPE_EDGE_RISING>,
 558                                      <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>,
 559                                      <GIC_SPI 53 IRQ_TYPE_EDGE_RISING>,
 560                                      <GIC_SPI 54 IRQ_TYPE_EDGE_RISING>,
 561                                      <GIC_SPI 55 IRQ_TYPE_EDGE_RISING>,
 562                                      <GIC_SPI 56 IRQ_TYPE_EDGE_RISING>,
 563                                      <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>,
 564                                      <GIC_SPI 58 IRQ_TYPE_EDGE_RISING>,
 565                                      <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>,
 566                                      <GIC_SPI 60 IRQ_TYPE_EDGE_RISING>,
 567                                      <GIC_SPI 61 IRQ_TYPE_EDGE_RISING>,
 568                                      <GIC_SPI 62 IRQ_TYPE_EDGE_RISING>,
 569                                      <GIC_SPI 63 IRQ_TYPE_EDGE_RISING>,
 570                                      <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
 571                         interrupt-names =  "msi0",  "msi1",  "msi2",  "msi3",
 572                                            "msi4",  "msi5",  "msi6",  "msi7",
 573                                            "msi8",  "msi9", "msi10", "msi11",
 574                                           "msi12", "msi13", "msi14", "msi15",
 575                                           "legacy";
 576                         status = "disabled";
 577                 };
 578         };
 579 };