arch/arm/boot/dts/qcom-apq8064.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 /dts-v1/;
   3
   4 #include "skeleton.dtsi"
   5 #include <dt-bindings/clock/qcom,gcc-msm8960.h>
   6 #include <dt-bindings/reset/qcom,gcc-msm8960.h>
   7 #include <dt-bindings/clock/qcom,mmcc-msm8960.h>
   8 #include <dt-bindings/clock/qcom,rpmcc.h>
   9 #include <dt-bindings/soc/qcom,gsbi.h>
  10 #include <dt-bindings/interrupt-controller/irq.h>
  11 #include <dt-bindings/interrupt-controller/arm-gic.h>
  12 / {
  13         model = "Qualcomm APQ8064";
  14         compatible = "qcom,apq8064";
  15         interrupt-parent = <&intc>;
  16
  17         reserved-memory {
  18                 #address-cells = <1>;
  19                 #size-cells = <1>;
  20                 ranges;
  21
  22                 smem_region: smem@80000000 {
  23                         reg = <0x80000000 0x200000>;
  24                         no-map;
  25                 };
  26
  27                 wcnss_mem: wcnss@8f000000 {
  28                         reg = <0x8f000000 0x700000>;
  29                         no-map;
  30                 };
  31         };
  32
  33         cpus {
  34                 #address-cells = <1>;
  35                 #size-cells = <0>;
  36
  37                 CPU0: cpu@0 {
  38                         compatible = "qcom,krait";
  39                         enable-method = "qcom,kpss-acc-v1";
  40                         device_type = "cpu";
  41                         reg = <0>;
  42                         next-level-cache = <&L2>;
  43                         qcom,acc = <&acc0>;
  44                         qcom,saw = <&saw0>;
  45                         cpu-idle-states = <&CPU_SPC>;
  46                 };
  47
  48                 CPU1: cpu@1 {
  49                         compatible = "qcom,krait";
  50                         enable-method = "qcom,kpss-acc-v1";
  51                         device_type = "cpu";
  52                         reg = <1>;
  53                         next-level-cache = <&L2>;
  54                         qcom,acc = <&acc1>;
  55                         qcom,saw = <&saw1>;
  56                         cpu-idle-states = <&CPU_SPC>;
  57                 };
  58
  59                 CPU2: cpu@2 {
  60                         compatible = "qcom,krait";
  61                         enable-method = "qcom,kpss-acc-v1";
  62                         device_type = "cpu";
  63                         reg = <2>;
  64                         next-level-cache = <&L2>;
  65                         qcom,acc = <&acc2>;
  66                         qcom,saw = <&saw2>;
  67                         cpu-idle-states = <&CPU_SPC>;
  68                 };
  69
  70                 CPU3: cpu@3 {
  71                         compatible = "qcom,krait";
  72                         enable-method = "qcom,kpss-acc-v1";
  73                         device_type = "cpu";
  74                         reg = <3>;
  75                         next-level-cache = <&L2>;
  76                         qcom,acc = <&acc3>;
  77                         qcom,saw = <&saw3>;
  78                         cpu-idle-states = <&CPU_SPC>;
  79                 };
  80
  81                 L2: l2-cache {
  82                         compatible = "cache";
  83                         cache-level = <2>;
  84                 };
  85
  86                 idle-states {
  87                         CPU_SPC: spc {
  88                                 compatible = "qcom,idle-state-spc",
  89                                                 "arm,idle-state";
  90                                 entry-latency-us = <400>;
  91                                 exit-latency-us = <900>;
  92                                 min-residency-us = <3000>;
  93                         };
  94                 };
  95         };
  96
  97         thermal-zones {
  98                 cpu-thermal0 {
  99                         polling-delay-passive = <250>;
 100                         polling-delay = <1000>;
 101
 102                         thermal-sensors = <&gcc 7>;
 103                         coefficients = <1199 0>;
 104
 105                         trips {
 106                                 cpu_alert0: trip0 {
 107                                         temperature = <75000>;
 108                                         hysteresis = <2000>;
 109                                         type = "passive";
 110                                 };
 111                                 cpu_crit0: trip1 {
 112                                         temperature = <110000>;
 113                                         hysteresis = <2000>;
 114                                         type = "critical";
 115                                 };
 116                         };
 117                 };
 118
 119                 cpu-thermal1 {
 120                         polling-delay-passive = <250>;
 121                         polling-delay = <1000>;
 122
 123                         thermal-sensors = <&gcc 8>;
 124                         coefficients = <1132 0>;
 125
 126                         trips {
 127                                 cpu_alert1: trip0 {
 128                                         temperature = <75000>;
 129                                         hysteresis = <2000>;
 130                                         type = "passive";
 131                                 };
 132                                 cpu_crit1: trip1 {
 133                                         temperature = <110000>;
 134                                         hysteresis = <2000>;
 135                                         type = "critical";
 136                                 };
 137                         };
 138                 };
 139
 140                 cpu-thermal2 {
 141                         polling-delay-passive = <250>;
 142                         polling-delay = <1000>;
 143
 144                         thermal-sensors = <&gcc 9>;
 145                         coefficients = <1199 0>;
 146
 147                         trips {
 148                                 cpu_alert2: trip0 {
 149                                         temperature = <75000>;
 150                                         hysteresis = <2000>;
 151                                         type = "passive";
 152                                 };
 153                                 cpu_crit2: trip1 {
 154                                         temperature = <110000>;
 155                                         hysteresis = <2000>;
 156                                         type = "critical";
 157                                 };
 158                         };
 159                 };
 160
 161                 cpu-thermal3 {
 162                         polling-delay-passive = <250>;
 163                         polling-delay = <1000>;
 164
 165                         thermal-sensors = <&gcc 10>;
 166                         coefficients = <1132 0>;
 167
 168                         trips {
 169                                 cpu_alert3: trip0 {
 170                                         temperature = <75000>;
 171                                         hysteresis = <2000>;
 172                                         type = "passive";
 173                                 };
 174                                 cpu_crit3: trip1 {
 175                                         temperature = <110000>;
 176                                         hysteresis = <2000>;
 177                                         type = "critical";
 178                                 };
 179                         };
 180                 };
 181         };
 182
 183         cpu-pmu {
 184                 compatible = "qcom,krait-pmu";
 185                 interrupts = <1 10 0x304>;
 186         };
 187
 188         clocks {
 189                 cxo_board: cxo_board {
 190                         compatible = "fixed-clock";
 191                         #clock-cells = <0>;
 192                         clock-frequency = <19200000>;
 193                 };
 194
 195                 pxo_board {
 196                         compatible = "fixed-clock";
 197                         #clock-cells = <0>;
 198                         clock-frequency = <27000000>;
 199                 };
 200
 201                 sleep_clk: sleep_clk {
 202                         compatible = "fixed-clock";
 203                         #clock-cells = <0>;
 204                         clock-frequency = <32768>;
 205                 };
 206         };
 207
 208         sfpb_mutex: hwmutex {
 209                 compatible = "qcom,sfpb-mutex";
 210                 syscon = <&sfpb_wrapper_mutex 0x604 0x4>;
 211                 #hwlock-cells = <1>;
 212         };
 213
 214         smem {
 215                 compatible = "qcom,smem";
 216                 memory-region = <&smem_region>;
 217
 218                 hwlocks = <&sfpb_mutex 3>;
 219         };
 220
 221         smd {
 222                 compatible = "qcom,smd";
 223
 224                 modem@0 {
 225                         interrupts = <0 37 IRQ_TYPE_EDGE_RISING>;
 226
 227                         qcom,ipc = <&l2cc 8 3>;
 228                         qcom,smd-edge = <0>;
 229
 230                         status = "disabled";
 231                 };
 232
 233                 q6@1 {
 234                         interrupts = <0 90 IRQ_TYPE_EDGE_RISING>;
 235
 236                         qcom,ipc = <&l2cc 8 15>;
 237                         qcom,smd-edge = <1>;
 238
 239                         status = "disabled";
 240                 };
 241
 242                 dsps@3 {
 243                         interrupts = <0 138 IRQ_TYPE_EDGE_RISING>;
 244
 245                         qcom,ipc = <&sps_sic_non_secure 0x4080 0>;
 246                         qcom,smd-edge = <3>;
 247
 248                         status = "disabled";
 249                 };
 250
 251                 riva@6 {
 252                         interrupts = <0 198 IRQ_TYPE_EDGE_RISING>;
 253
 254                         qcom,ipc = <&l2cc 8 25>;
 255                         qcom,smd-edge = <6>;
 256
 257                         status = "disabled";
 258                 };
 259         };
 260
 261         smsm {
 262                 compatible = "qcom,smsm";
 263
 264                 #address-cells = <1>;
 265                 #size-cells = <0>;
 266
 267                 qcom,ipc-1 = <&l2cc 8 4>;
 268                 qcom,ipc-2 = <&l2cc 8 14>;
 269                 qcom,ipc-3 = <&l2cc 8 23>;
 270                 qcom,ipc-4 = <&sps_sic_non_secure 0x4094 0>;
 271
 272                 apps_smsm: apps@0 {
 273                         reg = <0>;
 274                         #qcom,smem-state-cells = <1>;
 275                 };
 276
 277                 modem_smsm: modem@1 {
 278                         reg = <1>;
 279                         interrupts = <0 38 IRQ_TYPE_EDGE_RISING>;
 280
 281                         interrupt-controller;
 282                         #interrupt-cells = <2>;
 283                 };
 284
 285                 q6_smsm: q6@2 {
 286                         reg = <2>;
 287                         interrupts = <0 89 IRQ_TYPE_EDGE_RISING>;
 288
 289                         interrupt-controller;
 290                         #interrupt-cells = <2>;
 291                 };
 292
 293                 wcnss_smsm: wcnss@3 {
 294                         reg = <3>;
 295                         interrupts = <0 204 IRQ_TYPE_EDGE_RISING>;
 296
 297                         interrupt-controller;
 298                         #interrupt-cells = <2>;
 299                 };
 300
 301                 dsps_smsm: dsps@4 {
 302                         reg = <4>;
 303                         interrupts = <0 137 IRQ_TYPE_EDGE_RISING>;
 304
 305                         interrupt-controller;
 306                         #interrupt-cells = <2>;
 307                 };
 308         };
 309
 310         firmware {
 311                 scm {
 312                         compatible = "qcom,scm-apq8064";
 313
 314                         clocks = <&rpmcc RPM_DAYTONA_FABRIC_CLK>;
 315                         clock-names = "core";
 316                 };
 317         };
 318
 319         soc: soc {
 320                 #address-cells = <1>;
 321                 #size-cells = <1>;
 322                 ranges;
 323                 compatible = "simple-bus";
 324
 325                 tlmm_pinmux: pinctrl@800000 {
 326                         compatible = "qcom,apq8064-pinctrl";
 327                         reg = <0x800000 0x4000>;
 328
 329                         gpio-controller;
 330                         #gpio-cells = <2>;
 331                         interrupt-controller;
 332                         #interrupt-cells = <2>;
 333                         interrupts = <0 16 IRQ_TYPE_LEVEL_HIGH>;
 334
 335                         pinctrl-names = "default";
 336                         pinctrl-0 = <&ps_hold>;
 337                 };
 338
 339                 sfpb_wrapper_mutex: syscon@1200000 {
 340                         compatible = "syscon";
 341                         reg = <0x01200000 0x8000>;
 342                 };
 343
 344                 intc: interrupt-controller@2000000 {
 345                         compatible = "qcom,msm-qgic2";
 346                         interrupt-controller;
 347                         #interrupt-cells = <3>;
 348                         reg = <0x02000000 0x1000>,
 349                               <0x02002000 0x1000>;
 350                 };
 351
 352                 timer@200a000 {
 353                         compatible = "qcom,kpss-timer",
 354                                      "qcom,kpss-wdt-apq8064", "qcom,msm-timer";
 355                         interrupts = <1 1 0x301>,
 356                                      <1 2 0x301>,
 357                                      <1 3 0x301>;
 358                         reg = <0x0200a000 0x100>;
 359                         clock-frequency = <27000000>,
 360                                           <32768>;
 361                         cpu-offset = <0x80000>;
 362                 };
 363
 364                 acc0: clock-controller@2088000 {
 365                         compatible = "qcom,kpss-acc-v1";
 366                         reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
 367                 };
 368
 369                 acc1: clock-controller@2098000 {
 370                         compatible = "qcom,kpss-acc-v1";
 371                         reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
 372                 };
 373
 374                 acc2: clock-controller@20a8000 {
 375                         compatible = "qcom,kpss-acc-v1";
 376                         reg = <0x020a8000 0x1000>, <0x02008000 0x1000>;
 377                 };
 378
 379                 acc3: clock-controller@20b8000 {
 380                         compatible = "qcom,kpss-acc-v1";
 381                         reg = <0x020b8000 0x1000>, <0x02008000 0x1000>;
 382                 };
 383
 384                 saw0: power-controller@2089000 {
 385                         compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
 386                         reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
 387                         regulator;
 388                 };
 389
 390                 saw1: power-controller@2099000 {
 391                         compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
 392                         reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
 393                         regulator;
 394                 };
 395
 396                 saw2: power-controller@20a9000 {
 397                         compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
 398                         reg = <0x020a9000 0x1000>, <0x02009000 0x1000>;
 399                         regulator;
 400                 };
 401
 402                 saw3: power-controller@20b9000 {
 403                         compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
 404                         reg = <0x020b9000 0x1000>, <0x02009000 0x1000>;
 405                         regulator;
 406                 };
 407
 408                 sps_sic_non_secure: sps-sic-non-secure@12100000 {
 409                         compatible      = "syscon";
 410                         reg             = <0x12100000 0x10000>;
 411                 };
 412
 413                 gsbi1: gsbi@12440000 {
 414                         status = "disabled";
 415                         compatible = "qcom,gsbi-v1.0.0";
 416                         cell-index = <1>;
 417                         reg = <0x12440000 0x100>;
 418                         clocks = <&gcc GSBI1_H_CLK>;
 419                         clock-names = "iface";
 420                         #address-cells = <1>;
 421                         #size-cells = <1>;
 422                         ranges;
 423
 424                         syscon-tcsr = <&tcsr>;
 425
 426                         gsbi1_serial: serial@12450000 {
 427                                 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 428                                 reg = <0x12450000 0x100>,
 429                                       <0x12400000 0x03>;
 430                                 interrupts = <0 193 0x0>;
 431                                 clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>;
 432                                 clock-names = "core", "iface";
 433                                 status = "disabled";
 434                         };
 435
 436                         gsbi1_i2c: i2c@12460000 {
 437                                 compatible = "qcom,i2c-qup-v1.1.1";
 438                                 pinctrl-0 = <&i2c1_pins>;
 439                                 pinctrl-1 = <&i2c1_pins_sleep>;
 440                                 pinctrl-names = "default", "sleep";
 441                                 reg = <0x12460000 0x1000>;
 442                                 interrupts = <0 194 IRQ_TYPE_NONE>;
 443                                 clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
 444                                 clock-names = "core", "iface";
 445                                 #address-cells = <1>;
 446                                 #size-cells = <0>;
 447                         };
 448
 449                 };
 450
 451                 gsbi2: gsbi@12480000 {
 452                         status = "disabled";
 453                         compatible = "qcom,gsbi-v1.0.0";
 454                         cell-index = <2>;
 455                         reg = <0x12480000 0x100>;
 456                         clocks = <&gcc GSBI2_H_CLK>;
 457                         clock-names = "iface";
 458                         #address-cells = <1>;
 459                         #size-cells = <1>;
 460                         ranges;
 461
 462                         syscon-tcsr = <&tcsr>;
 463
 464                         gsbi2_i2c: i2c@124a0000 {
 465                                 compatible = "qcom,i2c-qup-v1.1.1";
 466                                 reg = <0x124a0000 0x1000>;
 467                                 pinctrl-0 = <&i2c2_pins>;
 468                                 pinctrl-1 = <&i2c2_pins_sleep>;
 469                                 pinctrl-names = "default", "sleep";
 470                                 interrupts = <0 196 IRQ_TYPE_NONE>;
 471                                 clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
 472                                 clock-names = "core", "iface";
 473                                 #address-cells = <1>;
 474                                 #size-cells = <0>;
 475                         };
 476                 };
 477
 478                 gsbi3: gsbi@16200000 {
 479                         status = "disabled";
 480                         compatible = "qcom,gsbi-v1.0.0";
 481                         cell-index = <3>;
 482                         reg = <0x16200000 0x100>;
 483                         clocks = <&gcc GSBI3_H_CLK>;
 484                         clock-names = "iface";
 485                         #address-cells = <1>;
 486                         #size-cells = <1>;
 487                         ranges;
 488                         gsbi3_i2c: i2c@16280000 {
 489                                 compatible = "qcom,i2c-qup-v1.1.1";
 490                                 pinctrl-0 = <&i2c3_pins>;
 491                                 pinctrl-1 = <&i2c3_pins_sleep>;
 492                                 pinctrl-names = "default", "sleep";
 493                                 reg = <0x16280000 0x1000>;
 494                                 interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
 495                                 clocks = <&gcc GSBI3_QUP_CLK>,
 496                                          <&gcc GSBI3_H_CLK>;
 497                                 clock-names = "core", "iface";
 498                                 #address-cells = <1>;
 499                                 #size-cells = <0>;
 500                         };
 501                 };
 502
 503                 gsbi4: gsbi@16300000 {
 504                         status = "disabled";
 505                         compatible = "qcom,gsbi-v1.0.0";
 506                         cell-index = <4>;
 507                         reg = <0x16300000 0x03>;
 508                         clocks = <&gcc GSBI4_H_CLK>;
 509                         clock-names = "iface";
 510                         #address-cells = <1>;
 511                         #size-cells = <1>;
 512                         ranges;
 513
 514                         gsbi4_i2c: i2c@16380000 {
 515                                 compatible = "qcom,i2c-qup-v1.1.1";
 516                                 pinctrl-0 = <&i2c4_pins>;
 517                                 pinctrl-1 = <&i2c4_pins_sleep>;
 518                                 pinctrl-names = "default", "sleep";
 519                                 reg = <0x16380000 0x1000>;
 520                                 interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
 521                                 clocks = <&gcc GSBI4_QUP_CLK>,
 522                                          <&gcc GSBI4_H_CLK>;
 523                                 clock-names = "core", "iface";
 524                         };
 525                 };
 526
 527                 gsbi5: gsbi@1a200000 {
 528                         status = "disabled";
 529                         compatible = "qcom,gsbi-v1.0.0";
 530                         cell-index = <5>;
 531                         reg = <0x1a200000 0x03>;
 532                         clocks = <&gcc GSBI5_H_CLK>;
 533                         clock-names = "iface";
 534                         #address-cells = <1>;
 535                         #size-cells = <1>;
 536                         ranges;
 537
 538                         gsbi5_serial: serial@1a240000 {
 539                                 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 540                                 reg = <0x1a240000 0x100>,
 541                                       <0x1a200000 0x03>;
 542                                 interrupts = <0 154 0x0>;
 543                                 clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
 544                                 clock-names = "core", "iface";
 545                                 status = "disabled";
 546                         };
 547
 548                         gsbi5_spi: spi@1a280000 {
 549                                 compatible = "qcom,spi-qup-v1.1.1";
 550                                 reg = <0x1a280000 0x1000>;
 551                                 interrupts = <0 155 0>;
 552                                 pinctrl-0 = <&spi5_default>;
 553                                 pinctrl-1 = <&spi5_sleep>;
 554                                 pinctrl-names = "default", "sleep";
 555                                 clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
 556                                 clock-names = "core", "iface";
 557                                 status = "disabled";
 558                                 #address-cells = <1>;
 559                                 #size-cells = <0>;
 560                         };
 561                 };
 562
 563                 gsbi6: gsbi@16500000 {
 564                         status = "disabled";
 565                         compatible = "qcom,gsbi-v1.0.0";
 566                         cell-index = <6>;
 567                         reg = <0x16500000 0x03>;
 568                         clocks = <&gcc GSBI6_H_CLK>;
 569                         clock-names = "iface";
 570                         #address-cells = <1>;
 571                         #size-cells = <1>;
 572                         ranges;
 573
 574                         gsbi6_serial: serial@16540000 {
 575                                 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 576                                 reg = <0x16540000 0x100>,
 577                                       <0x16500000 0x03>;
 578                                 interrupts = <0 156 0x0>;
 579                                 clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>;
 580                                 clock-names = "core", "iface";
 581                                 status = "disabled";
 582                         };
 583
 584                         gsbi6_i2c: i2c@16580000 {
 585                                 compatible = "qcom,i2c-qup-v1.1.1";
 586                                 pinctrl-0 = <&i2c6_pins>;
 587                                 pinctrl-1 = <&i2c6_pins_sleep>;
 588                                 pinctrl-names = "default", "sleep";
 589                                 reg = <0x16580000 0x1000>;
 590                                 interrupts = <GIC_SPI 157 IRQ_TYPE_NONE>;
 591                                 clocks = <&gcc GSBI6_QUP_CLK>,
 592                                          <&gcc GSBI6_H_CLK>;
 593                                 clock-names = "core", "iface";
 594                                 status = "disabled";
 595                         };
 596                 };
 597
 598                 gsbi7: gsbi@16600000 {
 599                         status = "disabled";
 600                         compatible = "qcom,gsbi-v1.0.0";
 601                         cell-index = <7>;
 602                         reg = <0x16600000 0x100>;
 603                         clocks = <&gcc GSBI7_H_CLK>;
 604                         clock-names = "iface";
 605                         #address-cells = <1>;
 606                         #size-cells = <1>;
 607                         ranges;
 608                         syscon-tcsr = <&tcsr>;
 609
 610                         gsbi7_serial: serial@16640000 {
 611                                 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 612                                 reg = <0x16640000 0x1000>,
 613                                       <0x16600000 0x1000>;
 614                                 interrupts = <0 158 0x0>;
 615                                 clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
 616                                 clock-names = "core", "iface";
 617                                 status = "disabled";
 618                         };
 619
 620                         gsbi7_i2c: i2c@16680000 {
 621                                 compatible = "qcom,i2c-qup-v1.1.1";
 622                                 pinctrl-0 = <&i2c7_pins>;
 623                                 pinctrl-1 = <&i2c7_pins_sleep>;
 624                                 pinctrl-names = "default", "sleep";
 625                                 reg = <0x16680000 0x1000>;
 626                                 interrupts = <GIC_SPI 159 IRQ_TYPE_NONE>;
 627                                 clocks = <&gcc GSBI7_QUP_CLK>,
 628                                          <&gcc GSBI7_H_CLK>;
 629                                 clock-names = "core", "iface";
 630                                 status = "disabled";
 631                         };
 632                 };
 633
 634                 rng@1a500000 {
 635                         compatible = "qcom,prng";
 636                         reg = <0x1a500000 0x200>;
 637                         clocks = <&gcc PRNG_CLK>;
 638                         clock-names = "core";
 639                 };
 640
 641                 ssbi@c00000 {
 642                         compatible = "qcom,ssbi";
 643                         reg = <0x00c00000 0x1000>;
 644                         qcom,controller-type = "pmic-arbiter";
 645
 646                         pm8821: pmic@1 {
 647                                 compatible = "qcom,pm8821";
 648                                 interrupt-parent = <&tlmm_pinmux>;
 649                                 interrupts = <76 IRQ_TYPE_LEVEL_LOW>;
 650                                 #interrupt-cells = <2>;
 651                                 interrupt-controller;
 652                                 #address-cells = <1>;
 653                                 #size-cells = <0>;
 654
 655                                 pm8821_mpps: mpps@50 {
 656                                         compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp";
 657                                         reg = <0x50>;
 658                                         interrupts = <24 IRQ_TYPE_NONE>,
 659                                                      <25 IRQ_TYPE_NONE>,
 660                                                      <26 IRQ_TYPE_NONE>,
 661                                                      <27 IRQ_TYPE_NONE>;
 662                                         gpio-controller;
 663                                         #gpio-cells = <2>;
 664                                 };
 665                         };
 666                 };
 667
 668                 qcom,ssbi@500000 {
 669                         compatible = "qcom,ssbi";
 670                         reg = <0x00500000 0x1000>;
 671                         qcom,controller-type = "pmic-arbiter";
 672
 673                         pmicintc: pmic@0 {
 674                                 compatible = "qcom,pm8921";
 675                                 interrupt-parent = <&tlmm_pinmux>;
 676                                 interrupts = <74 8>;
 677                                 #interrupt-cells = <2>;
 678                                 interrupt-controller;
 679                                 #address-cells = <1>;
 680                                 #size-cells = <0>;
 681
 682                                 pm8921_gpio: gpio@150 {
 683
 684                                         compatible = "qcom,pm8921-gpio",
 685                                                      "qcom,ssbi-gpio";
 686                                         reg = <0x150>;
 687                                         interrupts = <192 IRQ_TYPE_NONE>,
 688                                                      <193 IRQ_TYPE_NONE>,
 689                                                      <194 IRQ_TYPE_NONE>,
 690                                                      <195 IRQ_TYPE_NONE>,
 691                                                      <196 IRQ_TYPE_NONE>,
 692                                                      <197 IRQ_TYPE_NONE>,
 693                                                      <198 IRQ_TYPE_NONE>,
 694                                                      <199 IRQ_TYPE_NONE>,
 695                                                      <200 IRQ_TYPE_NONE>,
 696                                                      <201 IRQ_TYPE_NONE>,
 697                                                      <202 IRQ_TYPE_NONE>,
 698                                                      <203 IRQ_TYPE_NONE>,
 699                                                      <204 IRQ_TYPE_NONE>,
 700                                                      <205 IRQ_TYPE_NONE>,
 701                                                      <206 IRQ_TYPE_NONE>,
 702                                                      <207 IRQ_TYPE_NONE>,
 703                                                      <208 IRQ_TYPE_NONE>,
 704                                                      <209 IRQ_TYPE_NONE>,
 705                                                      <210 IRQ_TYPE_NONE>,
 706                                                      <211 IRQ_TYPE_NONE>,
 707                                                      <212 IRQ_TYPE_NONE>,
 708                                                      <213 IRQ_TYPE_NONE>,
 709                                                      <214 IRQ_TYPE_NONE>,
 710                                                      <215 IRQ_TYPE_NONE>,
 711                                                      <216 IRQ_TYPE_NONE>,
 712                                                      <217 IRQ_TYPE_NONE>,
 713                                                      <218 IRQ_TYPE_NONE>,
 714                                                      <219 IRQ_TYPE_NONE>,
 715                                                      <220 IRQ_TYPE_NONE>,
 716                                                      <221 IRQ_TYPE_NONE>,
 717                                                      <222 IRQ_TYPE_NONE>,
 718                                                      <223 IRQ_TYPE_NONE>,
 719                                                      <224 IRQ_TYPE_NONE>,
 720                                                      <225 IRQ_TYPE_NONE>,
 721                                                      <226 IRQ_TYPE_NONE>,
 722                                                      <227 IRQ_TYPE_NONE>,
 723                                                      <228 IRQ_TYPE_NONE>,
 724                                                      <229 IRQ_TYPE_NONE>,
 725                                                      <230 IRQ_TYPE_NONE>,
 726                                                      <231 IRQ_TYPE_NONE>,
 727                                                      <232 IRQ_TYPE_NONE>,
 728                                                      <233 IRQ_TYPE_NONE>,
 729                                                      <234 IRQ_TYPE_NONE>,
 730                                                      <235 IRQ_TYPE_NONE>;
 731                                         gpio-controller;
 732                                         #gpio-cells = <2>;
 733
 734                                 };
 735
 736                                 pm8921_mpps: mpps@50 {
 737                                         compatible = "qcom,pm8921-mpp",
 738                                                      "qcom,ssbi-mpp";
 739                                         reg = <0x50>;
 740                                         gpio-controller;
 741                                         #gpio-cells = <2>;
 742                                         interrupts =
 743                                         <128 IRQ_TYPE_NONE>,
 744                                         <129 IRQ_TYPE_NONE>,
 745                                         <130 IRQ_TYPE_NONE>,
 746                                         <131 IRQ_TYPE_NONE>,
 747                                         <132 IRQ_TYPE_NONE>,
 748                                         <133 IRQ_TYPE_NONE>,
 749                                         <134 IRQ_TYPE_NONE>,
 750                                         <135 IRQ_TYPE_NONE>,
 751                                         <136 IRQ_TYPE_NONE>,
 752                                         <137 IRQ_TYPE_NONE>,
 753                                         <138 IRQ_TYPE_NONE>,
 754                                         <139 IRQ_TYPE_NONE>;
 755                                 };
 756
 757                                 rtc@11d {
 758                                         compatible = "qcom,pm8921-rtc";
 759                                         interrupt-parent = <&pmicintc>;
 760                                         interrupts = <39 1>;
 761                                         reg = <0x11d>;
 762                                         allow-set-time;
 763                                 };
 764
 765                                 pwrkey@1c {
 766                                         compatible = "qcom,pm8921-pwrkey";
 767                                         reg = <0x1c>;
 768                                         interrupt-parent = <&pmicintc>;
 769                                         interrupts = <50 1>, <51 1>;
 770                                         debounce = <15625>;
 771                                         pull-up;
 772                                 };
 773                         };
 774                 };
 775
 776                 qfprom: qfprom@700000 {
 777                         compatible      = "qcom,qfprom";
 778                         reg             = <0x00700000 0x1000>;
 779                         #address-cells  = <1>;
 780                         #size-cells     = <1>;
 781                         ranges;
 782                         tsens_calib: calib {
 783                                 reg = <0x404 0x10>;
 784                         };
 785                         tsens_backup: backup_calib {
 786                                 reg = <0x414 0x10>;
 787                         };
 788                 };
 789
 790                 gcc: clock-controller@900000 {
 791                         compatible = "qcom,gcc-apq8064";
 792                         reg = <0x00900000 0x4000>;
 793                         nvmem-cells = <&tsens_calib>, <&tsens_backup>;
 794                         nvmem-cell-names = "calib", "calib_backup";
 795                         #clock-cells = <1>;
 796                         #reset-cells = <1>;
 797                         #thermal-sensor-cells = <1>;
 798                 };
 799
 800                 lcc: clock-controller@28000000 {
 801                         compatible = "qcom,lcc-apq8064";
 802                         reg = <0x28000000 0x1000>;
 803                         #clock-cells = <1>;
 804                         #reset-cells = <1>;
 805                 };
 806
 807                 mmcc: clock-controller@4000000 {
 808                         compatible = "qcom,mmcc-apq8064";
 809                         reg = <0x4000000 0x1000>;
 810                         #clock-cells = <1>;
 811                         #reset-cells = <1>;
 812                 };
 813
 814                 l2cc: clock-controller@2011000 {
 815                         compatible      = "syscon";
 816                         reg             = <0x2011000 0x1000>;
 817                 };
 818
 819                 rpm@108000 {
 820                         compatible      = "qcom,rpm-apq8064";
 821                         reg             = <0x108000 0x1000>;
 822                         qcom,ipc        = <&l2cc 0x8 2>;
 823
 824                         interrupts      = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
 825                                           <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
 826                                           <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
 827                         interrupt-names = "ack", "err", "wakeup";
 828
 829                         rpmcc: clock-controller {
 830                                 compatible      = "qcom,rpmcc-apq8064", "qcom,rpmcc";
 831                                 #clock-cells = <1>;
 832                         };
 833
 834                         regulators {
 835                                 compatible = "qcom,rpm-pm8921-regulators";
 836
 837                                 pm8921_s1: s1 {};
 838                                 pm8921_s2: s2 {};
 839                                 pm8921_s3: s3 {};
 840                                 pm8921_s4: s4 {};
 841                                 pm8921_s7: s7 {};
 842                                 pm8921_s8: s8 {};
 843
 844                                 pm8921_l1: l1 {};
 845                                 pm8921_l2: l2 {};
 846                                 pm8921_l3: l3 {};
 847                                 pm8921_l4: l4 {};
 848                                 pm8921_l5: l5 {};
 849                                 pm8921_l6: l6 {};
 850                                 pm8921_l7: l7 {};
 851                                 pm8921_l8: l8 {};
 852                                 pm8921_l9: l9 {};
 853                                 pm8921_l10: l10 {};
 854                                 pm8921_l11: l11 {};
 855                                 pm8921_l12: l12 {};
 856                                 pm8921_l14: l14 {};
 857                                 pm8921_l15: l15 {};
 858                                 pm8921_l16: l16 {};
 859                                 pm8921_l17: l17 {};
 860                                 pm8921_l18: l18 {};
 861                                 pm8921_l21: l21 {};
 862                                 pm8921_l22: l22 {};
 863                                 pm8921_l23: l23 {};
 864                                 pm8921_l24: l24 {};
 865                                 pm8921_l25: l25 {};
 866                                 pm8921_l26: l26 {};
 867                                 pm8921_l27: l27 {};
 868                                 pm8921_l28: l28 {};
 869                                 pm8921_l29: l29 {};
 870
 871                                 pm8921_lvs1: lvs1 {};
 872                                 pm8921_lvs2: lvs2 {};
 873                                 pm8921_lvs3: lvs3 {};
 874                                 pm8921_lvs4: lvs4 {};
 875                                 pm8921_lvs5: lvs5 {};
 876                                 pm8921_lvs6: lvs6 {};
 877                                 pm8921_lvs7: lvs7 {};
 878
 879                                 pm8921_usb_switch: usb-switch {};
 880
 881                                 pm8921_hdmi_switch: hdmi-switch {
 882                                         bias-pull-down;
 883                                 };
 884
 885                                 pm8921_ncp: ncp {};
 886                         };
 887                 };
 888
 889                 usb1: usb@12500000 {
 890                         compatible = "qcom,ci-hdrc";
 891                         reg = <0x12500000 0x200>,
 892                               <0x12500200 0x200>;
 893                         interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 894                         clocks = <&gcc USB_HS1_XCVR_CLK>, <&gcc USB_HS1_H_CLK>;
 895                         clock-names = "core", "iface";
 896                         assigned-clocks = <&gcc USB_HS1_XCVR_CLK>;
 897                         assigned-clock-rates = <60000000>;
 898                         resets = <&gcc USB_HS1_RESET>;
 899                         reset-names = "core";
 900                         phy_type = "ulpi";
 901                         ahb-burst-config = <0>;
 902                         phys = <&usb_hs1_phy>;
 903                         phy-names = "usb-phy";
 904                         status = "disabled";
 905                         #reset-cells = <1>;
 906
 907                         ulpi {
 908                                 usb_hs1_phy: phy {
 909                                         compatible = "qcom,usb-hs-phy-apq8064",
 910                                                      "qcom,usb-hs-phy";
 911                                         clocks = <&sleep_clk>, <&cxo_board>;
 912                                         clock-names = "sleep", "ref";
 913                                         resets = <&usb1 0>;
 914                                         reset-names = "por";
 915                                         #phy-cells = <0>;
 916                                 };
 917                         };
 918                 };
 919
 920                 usb3: usb@12520000 {
 921                         compatible = "qcom,ci-hdrc";
 922                         reg = <0x12520000 0x200>,
 923                               <0x12520200 0x200>;
 924                         interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
 925                         clocks = <&gcc USB_HS3_XCVR_CLK>, <&gcc USB_HS3_H_CLK>;
 926                         clock-names = "core", "iface";
 927                         assigned-clocks = <&gcc USB_HS3_XCVR_CLK>;
 928                         assigned-clock-rates = <60000000>;
 929                         resets = <&gcc USB_HS3_RESET>;
 930                         reset-names = "core";
 931                         phy_type = "ulpi";
 932                         ahb-burst-config = <0>;
 933                         phys = <&usb_hs3_phy>;
 934                         phy-names = "usb-phy";
 935                         status = "disabled";
 936                         #reset-cells = <1>;
 937
 938                         ulpi {
 939                                 usb_hs3_phy: phy {
 940                                         compatible = "qcom,usb-hs-phy-apq8064",
 941                                                      "qcom,usb-hs-phy";
 942                                         #phy-cells = <0>;
 943                                         clocks = <&sleep_clk>, <&cxo_board>;
 944                                         clock-names = "sleep", "ref";
 945                                         resets = <&usb3 0>;
 946                                         reset-names = "por";
 947                                 };
 948                         };
 949                 };
 950
 951                 usb4: usb@12530000 {
 952                         compatible = "qcom,ci-hdrc";
 953                         reg = <0x12530000 0x200>,
 954                               <0x12530200 0x200>;
 955                         interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
 956                         clocks = <&gcc USB_HS4_XCVR_CLK>, <&gcc USB_HS4_H_CLK>;
 957                         clock-names = "core", "iface";
 958                         assigned-clocks = <&gcc USB_HS4_XCVR_CLK>;
 959                         assigned-clock-rates = <60000000>;
 960                         resets = <&gcc USB_HS4_RESET>;
 961                         reset-names = "core";
 962                         phy_type = "ulpi";
 963                         ahb-burst-config = <0>;
 964                         phys = <&usb_hs4_phy>;
 965                         phy-names = "usb-phy";
 966                         status = "disabled";
 967                         #reset-cells = <1>;
 968
 969                         ulpi {
 970                                 usb_hs4_phy: phy {
 971                                         compatible = "qcom,usb-hs-phy-apq8064",
 972                                                      "qcom,usb-hs-phy";
 973                                         #phy-cells = <0>;
 974                                         clocks = <&sleep_clk>, <&cxo_board>;
 975                                         clock-names = "sleep", "ref";
 976                                         resets = <&usb4 0>;
 977                                         reset-names = "por";
 978                                 };
 979                         };
 980                 };
 981
 982                 sata_phy0: phy@1b400000 {
 983                         compatible      = "qcom,apq8064-sata-phy";
 984                         status          = "disabled";
 985                         reg             = <0x1b400000 0x200>;
 986                         reg-names       = "phy_mem";
 987                         clocks          = <&gcc SATA_PHY_CFG_CLK>;
 988                         clock-names     = "cfg";
 989                         #phy-cells      = <0>;
 990                 };
 991
 992                 sata0: sata@29000000 {
 993                         compatible              = "qcom,apq8064-ahci", "generic-ahci";
 994                         status                  = "disabled";
 995                         reg                     = <0x29000000 0x180>;
 996                         interrupts              = <GIC_SPI 209 IRQ_TYPE_NONE>;
 997
 998                         clocks                  = <&gcc SFAB_SATA_S_H_CLK>,
 999                                                 <&gcc SATA_H_CLK>,
1000                                                 <&gcc SATA_A_CLK>,
1001                                                 <&gcc SATA_RXOOB_CLK>,
1002                                                 <&gcc SATA_PMALIVE_CLK>;
1003                         clock-names             = "slave_iface",
1004                                                 "iface",
1005                                                 "bus",
1006                                                 "rxoob",
1007                                                 "core_pmalive";
1008
1009                         assigned-clocks         = <&gcc SATA_RXOOB_CLK>,
1010                                                 <&gcc SATA_PMALIVE_CLK>;
1011                         assigned-clock-rates    = <100000000>, <100000000>;
1012
1013                         phys                    = <&sata_phy0>;
1014                         phy-names               = "sata-phy";
1015                         ports-implemented       = <0x1>;
1016                 };
1017
1018                 /* Temporary fixed regulator */
1019                 sdcc1bam:dma@12402000{
1020                         compatible = "qcom,bam-v1.3.0";
1021                         reg = <0x12402000 0x8000>;
1022                         interrupts = <0 98 0>;
1023                         clocks = <&gcc SDC1_H_CLK>;
1024                         clock-names = "bam_clk";
1025                         #dma-cells = <1>;
1026                         qcom,ee = <0>;
1027                 };
1028
1029                 sdcc3bam:dma@12182000{
1030                         compatible = "qcom,bam-v1.3.0";
1031                         reg = <0x12182000 0x8000>;
1032                         interrupts = <0 96 0>;
1033                         clocks = <&gcc SDC3_H_CLK>;
1034                         clock-names = "bam_clk";
1035                         #dma-cells = <1>;
1036                         qcom,ee = <0>;
1037                 };
1038
1039                 sdcc4bam:dma@121c2000{
1040                         compatible = "qcom,bam-v1.3.0";
1041                         reg = <0x121c2000 0x8000>;
1042                         interrupts = <0 95 0>;
1043                         clocks = <&gcc SDC4_H_CLK>;
1044                         clock-names = "bam_clk";
1045                         #dma-cells = <1>;
1046                         qcom,ee = <0>;
1047                 };
1048
1049                 amba {
1050                         compatible = "simple-bus";
1051                         #address-cells = <1>;
1052                         #size-cells = <1>;
1053                         ranges;
1054                         sdcc1: sdcc@12400000 {
1055                                 status          = "disabled";
1056                                 compatible      = "arm,pl18x", "arm,primecell";
1057                                 pinctrl-names   = "default";
1058                                 pinctrl-0       = <&sdcc1_pins>;
1059                                 arm,primecell-periphid = <0x00051180>;
1060                                 reg             = <0x12400000 0x2000>;
1061                                 interrupts      = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
1062                                 interrupt-names = "cmd_irq";
1063                                 clocks          = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
1064                                 clock-names     = "mclk", "apb_pclk";
1065                                 bus-width       = <8>;
1066                                 max-frequency   = <96000000>;
1067                                 non-removable;
1068                                 cap-sd-highspeed;
1069                                 cap-mmc-highspeed;
1070                                 dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
1071                                 dma-names = "tx", "rx";
1072                         };
1073
1074                         sdcc3: sdcc@12180000 {
1075                                 compatible      = "arm,pl18x", "arm,primecell";
1076                                 arm,primecell-periphid = <0x00051180>;
1077                                 status          = "disabled";
1078                                 reg             = <0x12180000 0x2000>;
1079                                 interrupts      = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
1080                                 interrupt-names = "cmd_irq";
1081                                 clocks          = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
1082                                 clock-names     = "mclk", "apb_pclk";
1083                                 bus-width       = <4>;
1084                                 cap-sd-highspeed;
1085                                 cap-mmc-highspeed;
1086                                 max-frequency   = <192000000>;
1087                                 no-1-8-v;
1088                                 dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
1089                                 dma-names = "tx", "rx";
1090                         };
1091
1092                         sdcc4: sdcc@121c0000 {
1093                                 compatible      = "arm,pl18x", "arm,primecell";
1094                                 arm,primecell-periphid = <0x00051180>;
1095                                 status          = "disabled";
1096                                 reg             = <0x121c0000 0x2000>;
1097                                 interrupts      = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
1098                                 interrupt-names = "cmd_irq";
1099                                 clocks          = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
1100                                 clock-names     = "mclk", "apb_pclk";
1101                                 bus-width       = <4>;
1102                                 cap-sd-highspeed;
1103                                 cap-mmc-highspeed;
1104                                 max-frequency   = <48000000>;
1105                                 dmas = <&sdcc4bam 2>, <&sdcc4bam 1>;
1106                                 dma-names = "tx", "rx";
1107                                 pinctrl-names = "default";
1108                                 pinctrl-0 = <&sdc4_gpios>;
1109                         };
1110                 };
1111
1112                 tcsr: syscon@1a400000 {
1113                         compatible = "qcom,tcsr-apq8064", "syscon";
1114                         reg = <0x1a400000 0x100>;
1115                 };
1116
1117                 gpu: adreno-3xx@4300000 {
1118                         compatible = "qcom,adreno-3xx";
1119                         reg = <0x04300000 0x20000>;
1120                         reg-names = "kgsl_3d0_reg_memory";
1121                         interrupts = <GIC_SPI 80 0>;
1122                         interrupt-names = "kgsl_3d0_irq";
1123                         clock-names =
1124                             "core_clk",
1125                             "iface_clk",
1126                             "mem_clk",
1127                             "mem_iface_clk";
1128                         clocks =
1129                             <&mmcc GFX3D_CLK>,
1130                             <&mmcc GFX3D_AHB_CLK>,
1131                             <&mmcc GFX3D_AXI_CLK>,
1132                             <&mmcc MMSS_IMEM_AHB_CLK>;
1133                         qcom,chipid = <0x03020002>;
1134
1135                         iommus = <&gfx3d 0
1136                                   &gfx3d 1
1137                                   &gfx3d 2
1138                                   &gfx3d 3
1139                                   &gfx3d 4
1140                                   &gfx3d 5
1141                                   &gfx3d 6
1142                                   &gfx3d 7
1143                                   &gfx3d 8
1144                                   &gfx3d 9
1145                                   &gfx3d 10
1146                                   &gfx3d 11
1147                                   &gfx3d 12
1148                                   &gfx3d 13
1149                                   &gfx3d 14
1150                                   &gfx3d 15
1151                                   &gfx3d 16
1152                                   &gfx3d 17
1153                                   &gfx3d 18
1154                                   &gfx3d 19
1155                                   &gfx3d 20
1156                                   &gfx3d 21
1157                                   &gfx3d 22
1158                                   &gfx3d 23
1159                                   &gfx3d 24
1160                                   &gfx3d 25
1161                                   &gfx3d 26
1162                                   &gfx3d 27
1163                                   &gfx3d 28
1164                                   &gfx3d 29
1165                                   &gfx3d 30
1166                                   &gfx3d 31
1167                                   &gfx3d1 0
1168                                   &gfx3d1 1
1169                                   &gfx3d1 2
1170                                   &gfx3d1 3
1171                                   &gfx3d1 4
1172                                   &gfx3d1 5
1173                                   &gfx3d1 6
1174                                   &gfx3d1 7
1175                                   &gfx3d1 8
1176                                   &gfx3d1 9
1177                                   &gfx3d1 10
1178                                   &gfx3d1 11
1179                                   &gfx3d1 12
1180                                   &gfx3d1 13
1181                                   &gfx3d1 14
1182                                   &gfx3d1 15
1183                                   &gfx3d1 16
1184                                   &gfx3d1 17
1185                                   &gfx3d1 18
1186                                   &gfx3d1 19
1187                                   &gfx3d1 20
1188                                   &gfx3d1 21
1189                                   &gfx3d1 22
1190                                   &gfx3d1 23
1191                                   &gfx3d1 24
1192                                   &gfx3d1 25
1193                                   &gfx3d1 26
1194                                   &gfx3d1 27
1195                                   &gfx3d1 28
1196                                   &gfx3d1 29
1197                                   &gfx3d1 30
1198                                   &gfx3d1 31>;
1199
1200                         qcom,gpu-pwrlevels {
1201                                 compatible = "qcom,gpu-pwrlevels";
1202                                 qcom,gpu-pwrlevel@0 {
1203                                         qcom,gpu-freq = <450000000>;
1204                                 };
1205                                 qcom,gpu-pwrlevel@1 {
1206                                         qcom,gpu-freq = <27000000>;
1207                                 };
1208                         };
1209                 };
1210
1211                 mmss_sfpb: syscon@5700000 {
1212                         compatible = "syscon";
1213                         reg = <0x5700000 0x70>;
1214                 };
1215
1216                 dsi0: mdss_dsi@4700000 {
1217                         compatible = "qcom,mdss-dsi-ctrl";
1218                         label = "MDSS DSI CTRL->0";
1219                         #address-cells = <1>;
1220                         #size-cells = <0>;
1221                         interrupts = <GIC_SPI 82 0>;
1222                         reg = <0x04700000 0x200>;
1223                         reg-names = "dsi_ctrl";
1224
1225                         clocks = <&mmcc DSI_M_AHB_CLK>,
1226                                 <&mmcc DSI_S_AHB_CLK>,
1227                                 <&mmcc AMP_AHB_CLK>,
1228                                 <&mmcc DSI_CLK>,
1229                                 <&mmcc DSI1_BYTE_CLK>,
1230                                 <&mmcc DSI_PIXEL_CLK>,
1231                                 <&mmcc DSI1_ESC_CLK>;
1232                         clock-names = "iface_clk", "bus_clk", "core_mmss_clk",
1233                                         "src_clk", "byte_clk", "pixel_clk",
1234                                         "core_clk";
1235
1236                         assigned-clocks = <&mmcc DSI1_BYTE_SRC>,
1237                                         <&mmcc DSI1_ESC_SRC>,
1238                                         <&mmcc DSI_SRC>,
1239                                         <&mmcc DSI_PIXEL_SRC>;
1240                         assigned-clock-parents = <&dsi0_phy 0>,
1241                                                 <&dsi0_phy 0>,
1242                                                 <&dsi0_phy 1>,
1243                                                 <&dsi0_phy 1>;
1244                         syscon-sfpb = <&mmss_sfpb>;
1245                         phys = <&dsi0_phy>;
1246                         ports {
1247                                 #address-cells = <1>;
1248                                 #size-cells = <0>;
1249
1250                                 port@0 {
1251                                         reg = <0>;
1252                                         dsi0_in: endpoint {
1253                                         };
1254                                 };
1255
1256                                 port@1 {
1257                                         reg = <1>;
1258                                         dsi0_out: endpoint {
1259                                         };
1260                                 };
1261                         };
1262                 };
1263
1264
1265                 dsi0_phy: dsi-phy@4700200 {
1266                         compatible = "qcom,dsi-phy-28nm-8960";
1267                         #clock-cells = <1>;
1268                         #phy-cells = <0>;
1269
1270                         reg = <0x04700200 0x100>,
1271                                 <0x04700300 0x200>,
1272                                 <0x04700500 0x5c>;
1273                         reg-names = "dsi_pll", "dsi_phy", "dsi_phy_regulator";
1274                         clock-names = "iface_clk";
1275                         clocks = <&mmcc DSI_M_AHB_CLK>;
1276                 };
1277
1278
1279                 mdp_port0: iommu@7500000 {
1280                         compatible = "qcom,apq8064-iommu";
1281                         #iommu-cells = <1>;
1282                         clock-names =
1283                             "smmu_pclk",
1284                             "iommu_clk";
1285                         clocks =
1286                             <&mmcc SMMU_AHB_CLK>,
1287                             <&mmcc MDP_AXI_CLK>;
1288                         reg = <0x07500000 0x100000>;
1289                         interrupts =
1290                             <GIC_SPI 63 0>,
1291                             <GIC_SPI 64 0>;
1292                         qcom,ncb = <2>;
1293                 };
1294
1295                 mdp_port1: iommu@7600000 {
1296                         compatible = "qcom,apq8064-iommu";
1297                         #iommu-cells = <1>;
1298                         clock-names =
1299                             "smmu_pclk",
1300                             "iommu_clk";
1301                         clocks =
1302                             <&mmcc SMMU_AHB_CLK>,
1303                             <&mmcc MDP_AXI_CLK>;
1304                         reg = <0x07600000 0x100000>;
1305                         interrupts =
1306                             <GIC_SPI 61 0>,
1307                             <GIC_SPI 62 0>;
1308                         qcom,ncb = <2>;
1309                 };
1310
1311                 gfx3d: iommu@7c00000 {
1312                         compatible = "qcom,apq8064-iommu";
1313                         #iommu-cells = <1>;
1314                         clock-names =
1315                             "smmu_pclk",
1316                             "iommu_clk";
1317                         clocks =
1318                             <&mmcc SMMU_AHB_CLK>,
1319                             <&mmcc GFX3D_AXI_CLK>;
1320                         reg = <0x07c00000 0x100000>;
1321                         interrupts =
1322                             <GIC_SPI 69 0>,
1323                             <GIC_SPI 70 0>;
1324                         qcom,ncb = <3>;
1325                 };
1326
1327                 gfx3d1: iommu@7d00000 {
1328                         compatible = "qcom,apq8064-iommu";
1329                         #iommu-cells = <1>;
1330                         clock-names =
1331                             "smmu_pclk",
1332                             "iommu_clk";
1333                         clocks =
1334                             <&mmcc SMMU_AHB_CLK>,
1335                             <&mmcc GFX3D_AXI_CLK>;
1336                         reg = <0x07d00000 0x100000>;
1337                         interrupts =
1338                             <GIC_SPI 210 0>,
1339                             <GIC_SPI 211 0>;
1340                         qcom,ncb = <3>;
1341                 };
1342
1343                 pcie: pci@1b500000 {
1344                         compatible = "qcom,pcie-apq8064", "snps,dw-pcie";
1345                         reg = <0x1b500000 0x1000
1346                                0x1b502000 0x80
1347                                0x1b600000 0x100
1348                                0x0ff00000 0x100000>;
1349                         reg-names = "dbi", "elbi", "parf", "config";
1350                         device_type = "pci";
1351                         linux,pci-domain = <0>;
1352                         bus-range = <0x00 0xff>;
1353                         num-lanes = <1>;
1354                         #address-cells = <3>;
1355                         #size-cells = <2>;
1356                         ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000   /* I/O */
1357                                   0x82000000 0 0 0x08000000 0 0x07e00000>; /* memory */
1358                         interrupts = <GIC_SPI 238 IRQ_TYPE_NONE>;
1359                         interrupt-names = "msi";
1360                         #interrupt-cells = <1>;
1361                         interrupt-map-mask = <0 0 0 0x7>;
1362                         interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
1363                                         <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
1364                                         <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
1365                                         <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
1366                         clocks = <&gcc PCIE_A_CLK>,
1367                                  <&gcc PCIE_H_CLK>,
1368                                  <&gcc PCIE_PHY_REF_CLK>;
1369                         clock-names = "core", "iface", "phy";
1370                         resets = <&gcc PCIE_ACLK_RESET>,
1371                                  <&gcc PCIE_HCLK_RESET>,
1372                                  <&gcc PCIE_POR_RESET>,
1373                                  <&gcc PCIE_PCI_RESET>,
1374                                  <&gcc PCIE_PHY_RESET>;
1375                         reset-names = "axi", "ahb", "por", "pci", "phy";
1376                         status = "disabled";
1377                 };
1378
1379                 hdmi: hdmi-tx@4a00000 {
1380                         compatible = "qcom,hdmi-tx-8960";
1381                         pinctrl-names = "default";
1382                         pinctrl-0 = <&hdmi_pinctrl>;
1383                         reg = <0x04a00000 0x2f0>;
1384                         reg-names = "core_physical";
1385                         interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
1386                         clocks = <&mmcc HDMI_APP_CLK>,
1387                                  <&mmcc HDMI_M_AHB_CLK>,
1388                                  <&mmcc HDMI_S_AHB_CLK>;
1389                         clock-names = "core_clk",
1390                                       "master_iface_clk",
1391                                       "slave_iface_clk";
1392
1393                         phys = <&hdmi_phy>;
1394                         phy-names = "hdmi-phy";
1395
1396                         ports {
1397                                 #address-cells = <1>;
1398                                 #size-cells = <0>;
1399
1400                                 port@0 {
1401                                         reg = <0>;
1402                                         hdmi_in: endpoint {
1403                                         };
1404                                 };
1405
1406                                 port@1 {
1407                                         reg = <1>;
1408                                         hdmi_out: endpoint {
1409                                         };
1410                                 };
1411                         };
1412                 };
1413
1414                 hdmi_phy: hdmi-phy@4a00400 {
1415                         compatible = "qcom,hdmi-phy-8960";
1416                         reg = <0x4a00400 0x60>,
1417                               <0x4a00500 0x100>;
1418                         reg-names = "hdmi_phy",
1419                                     "hdmi_pll";
1420
1421                         clocks = <&mmcc HDMI_S_AHB_CLK>;
1422                         clock-names = "slave_iface_clk";
1423                         #phy-cells = <0>;
1424                 };
1425
1426                 mdp: mdp@5100000 {
1427                         compatible = "qcom,mdp4";
1428                         reg = <0x05100000 0xf0000>;
1429                         interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
1430                         clocks = <&mmcc MDP_CLK>,
1431                                  <&mmcc MDP_AHB_CLK>,
1432                                  <&mmcc MDP_AXI_CLK>,
1433                                  <&mmcc MDP_LUT_CLK>,
1434                                  <&mmcc HDMI_TV_CLK>,
1435                                  <&mmcc MDP_TV_CLK>;
1436                         clock-names = "core_clk",
1437                                       "iface_clk",
1438                                       "bus_clk",
1439                                       "lut_clk",
1440                                       "hdmi_clk",
1441                                       "tv_clk";
1442
1443                         iommus = <&mdp_port0 0
1444                                   &mdp_port0 2
1445                                   &mdp_port1 0
1446                                   &mdp_port1 2>;
1447
1448                         ports {
1449                                 #address-cells = <1>;
1450                                 #size-cells = <0>;
1451
1452                                 port@0 {
1453                                         reg = <0>;
1454                                         mdp_lvds_out: endpoint {
1455                                         };
1456                                 };
1457
1458                                 port@1 {
1459                                         reg = <1>;
1460                                         mdp_dsi1_out: endpoint {
1461                                         };
1462                                 };
1463
1464                                 port@2 {
1465                                         reg = <2>;
1466                                         mdp_dsi2_out: endpoint {
1467                                         };
1468                                 };
1469
1470                                 port@3 {
1471                                         reg = <3>;
1472                                         mdp_dtv_out: endpoint {
1473                                         };
1474                                 };
1475                         };
1476                 };
1477
1478                 riva: riva-pil@3204000 {
1479                         compatible = "qcom,riva-pil";
1480
1481                         reg = <0x03200800 0x1000>, <0x03202000 0x2000>, <0x03204000 0x100>;
1482                         reg-names = "ccu", "dxe", "pmu";
1483
1484                         interrupts-extended = <&intc GIC_SPI 199 IRQ_TYPE_EDGE_RISING>,
1485                                               <&wcnss_smsm 6 IRQ_TYPE_EDGE_RISING>;
1486                         interrupt-names = "wdog", "fatal";
1487
1488                         memory-region = <&wcnss_mem>;
1489
1490                         vddcx-supply = <&pm8921_s3>;
1491                         vddmx-supply = <&pm8921_l24>;
1492                         vddpx-supply = <&pm8921_s4>;
1493
1494                         status = "disabled";
1495
1496                         iris {
1497                                 compatible = "qcom,wcn3660";
1498
1499                                 clocks = <&cxo_board>;
1500                                 clock-names = "xo";
1501
1502                                 vddxo-supply = <&pm8921_l4>;
1503                                 vddrfa-supply = <&pm8921_s2>;
1504                                 vddpa-supply = <&pm8921_l10>;
1505                                 vdddig-supply = <&pm8921_lvs2>;
1506                         };
1507
1508                         smd-edge {
1509                                 interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>;
1510
1511                                 qcom,ipc = <&l2cc 8 25>;
1512                                 qcom,smd-edge = <6>;
1513
1514                                 label = "riva";
1515
1516                                 wcnss {
1517                                         compatible = "qcom,wcnss";
1518                                         qcom,smd-channels = "WCNSS_CTRL";
1519
1520                                         qcom,mmio = <&riva>;
1521
1522                                         bt {
1523                                                 compatible = "qcom,wcnss-bt";
1524                                         };
1525
1526                                         wifi {
1527                                                 compatible = "qcom,wcnss-wlan";
1528
1529                                                 interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
1530                                                              <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
1531                                                 interrupt-names = "tx", "rx";
1532
1533                                                 qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
1534                                                 qcom,smem-state-names = "tx-enable", "tx-rings-empty";
1535                                         };
1536                                 };
1537                         };
1538                 };
1539
1540                 etb@1a01000 {
1541                         compatible = "coresight-etb10", "arm,primecell";
1542                         reg = <0x1a01000 0x1000>;
1543
1544                         clocks = <&rpmcc RPM_QDSS_CLK>;
1545                         clock-names = "apb_pclk";
1546
1547                         port {
1548                                 etb_in: endpoint {
1549                                         slave-mode;
1550                                         remote-endpoint = <&replicator_out0>;
1551                                 };
1552                         };
1553                 };
1554
1555                 tpiu@1a03000 {
1556                         compatible = "arm,coresight-tpiu", "arm,primecell";
1557                         reg = <0x1a03000 0x1000>;
1558
1559                         clocks = <&rpmcc RPM_QDSS_CLK>;
1560                         clock-names = "apb_pclk";
1561
1562                         port {
1563                                 tpiu_in: endpoint {
1564                                         slave-mode;
1565                                         remote-endpoint = <&replicator_out1>;
1566                                 };
1567                         };
1568                 };
1569
1570                 replicator {
1571                         compatible = "arm,coresight-replicator";
1572
1573                         clocks = <&rpmcc RPM_QDSS_CLK>;
1574                         clock-names = "apb_pclk";
1575
1576                         ports {
1577                                 #address-cells = <1>;
1578                                 #size-cells = <0>;
1579
1580                                 port@0 {
1581                                         reg = <0>;
1582                                         replicator_out0: endpoint {
1583                                                 remote-endpoint = <&etb_in>;
1584                                         };
1585                                 };
1586                                 port@1 {
1587                                         reg = <1>;
1588                                         replicator_out1: endpoint {
1589                                                 remote-endpoint = <&tpiu_in>;
1590                                         };
1591                                 };
1592                                 port@2 {
1593                                         reg = <0>;
1594                                         replicator_in: endpoint {
1595                                                 slave-mode;
1596                                                 remote-endpoint = <&funnel_out>;
1597                                         };
1598                                 };
1599                         };
1600                 };
1601
1602                 funnel@1a04000 {
1603                         compatible = "arm,coresight-funnel", "arm,primecell";
1604                         reg = <0x1a04000 0x1000>;
1605
1606                         clocks = <&rpmcc RPM_QDSS_CLK>;
1607                         clock-names = "apb_pclk";
1608
1609                         ports {
1610                                 #address-cells = <1>;
1611                                 #size-cells = <0>;
1612
1613                                 /*
1614                                  * Not described input ports:
1615                                  * 2 - connected to STM component
1616                                  * 3 - not-connected
1617                                  * 6 - not-connected
1618                                  * 7 - not-connected
1619                                  */
1620                                 port@0 {
1621                                         reg = <0>;
1622                                         funnel_in0: endpoint {
1623                                                 slave-mode;
1624                                                 remote-endpoint = <&etm0_out>;
1625                                         };
1626                                 };
1627                                 port@1 {
1628                                         reg = <1>;
1629                                         funnel_in1: endpoint {
1630                                                 slave-mode;
1631                                                 remote-endpoint = <&etm1_out>;
1632                                         };
1633                                 };
1634                                 port@4 {
1635                                         reg = <4>;
1636                                         funnel_in4: endpoint {
1637                                                 slave-mode;
1638                                                 remote-endpoint = <&etm2_out>;
1639                                         };
1640                                 };
1641                                 port@5 {
1642                                         reg = <5>;
1643                                         funnel_in5: endpoint {
1644                                                 slave-mode;
1645                                                 remote-endpoint = <&etm3_out>;
1646                                         };
1647                                 };
1648                                 port@8 {
1649                                         reg = <0>;
1650                                         funnel_out: endpoint {
1651                                                 remote-endpoint = <&replicator_in>;
1652                                         };
1653                                 };
1654                         };
1655                 };
1656
1657                 etm@1a1c000 {
1658                         compatible = "arm,coresight-etm3x", "arm,primecell";
1659                         reg = <0x1a1c000 0x1000>;
1660
1661                         clocks = <&rpmcc RPM_QDSS_CLK>;
1662                         clock-names = "apb_pclk";
1663
1664                         cpu = <&CPU0>;
1665
1666                         port {
1667                                 etm0_out: endpoint {
1668                                         remote-endpoint = <&funnel_in0>;
1669                                 };
1670                         };
1671                 };
1672
1673                 etm@1a1d000 {
1674                         compatible = "arm,coresight-etm3x", "arm,primecell";
1675                         reg = <0x1a1d000 0x1000>;
1676
1677                         clocks = <&rpmcc RPM_QDSS_CLK>;
1678                         clock-names = "apb_pclk";
1679
1680                         cpu = <&CPU1>;
1681
1682                         port {
1683                                 etm1_out: endpoint {
1684                                         remote-endpoint = <&funnel_in1>;
1685                                 };
1686                         };
1687                 };
1688
1689                 etm@1a1e000 {
1690                         compatible = "arm,coresight-etm3x", "arm,primecell";
1691                         reg = <0x1a1e000 0x1000>;
1692
1693                         clocks = <&rpmcc RPM_QDSS_CLK>;
1694                         clock-names = "apb_pclk";
1695
1696                         cpu = <&CPU2>;
1697
1698                         port {
1699                                 etm2_out: endpoint {
1700                                         remote-endpoint = <&funnel_in4>;
1701                                 };
1702                         };
1703                 };
1704
1705                 etm@1a1f000 {
1706                         compatible = "arm,coresight-etm3x", "arm,primecell";
1707                         reg = <0x1a1f000 0x1000>;
1708
1709                         clocks = <&rpmcc RPM_QDSS_CLK>;
1710                         clock-names = "apb_pclk";
1711
1712                         cpu = <&CPU3>;
1713
1714                         port {
1715                                 etm3_out: endpoint {
1716                                         remote-endpoint = <&funnel_in5>;
1717                                 };
1718                         };
1719                 };
1720         };
1721 };
1722 #include "qcom-apq8064-pins.dtsi"