arch/arm/boot/dts/omap5-board-common.dtsi

   1 /*
   2  * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8 #include "omap5.dtsi"
   9 #include <dt-bindings/interrupt-controller/irq.h>
  10 #include <dt-bindings/interrupt-controller/arm-gic.h>
  11
  12 / {
  13         aliases {
  14                 display0 = &hdmi0;
  15         };
  16
  17         vmain: fixedregulator-vmain {
  18                 compatible = "regulator-fixed";
  19                 regulator-name = "vmain";
  20                 regulator-min-microvolt = <5000000>;
  21                 regulator-max-microvolt = <5000000>;
  22         };
  23
  24         vsys_cobra: fixedregulator-vsys_cobra {
  25                 compatible = "regulator-fixed";
  26                 regulator-name = "vsys_cobra";
  27                 vin-supply = <&vmain>;
  28                 regulator-min-microvolt = <5000000>;
  29                 regulator-max-microvolt = <5000000>;
  30         };
  31
  32         vdds_1v8_main: fixedregulator-vdds_1v8_main {
  33                 compatible = "regulator-fixed";
  34                 regulator-name = "vdds_1v8_main";
  35                 vin-supply = <&smps7_reg>;
  36                 regulator-min-microvolt = <1800000>;
  37                 regulator-max-microvolt = <1800000>;
  38         };
  39
  40         vmmcsd_fixed: fixedregulator-mmcsd {
  41                 compatible = "regulator-fixed";
  42                 regulator-name = "vmmcsd_fixed";
  43                 regulator-min-microvolt = <3000000>;
  44                 regulator-max-microvolt = <3000000>;
  45         };
  46
  47         mmc3_pwrseq: sdhci0_pwrseq {
  48                 compatible = "mmc-pwrseq-simple";
  49                 clocks = <&clk32kgaudio>;
  50                 clock-names = "ext_clock";
  51         };
  52
  53         vmmcsdio_fixed: fixedregulator-mmcsdio {
  54                 compatible = "regulator-fixed";
  55                 regulator-name = "vmmcsdio_fixed";
  56                 regulator-min-microvolt = <1800000>;
  57                 regulator-max-microvolt = <1800000>;
  58                 gpio = <&gpio5 12 GPIO_ACTIVE_HIGH>;    /* gpio140 WLAN_EN */
  59                 enable-active-high;
  60                 startup-delay-us = <70000>;
  61                 pinctrl-names = "default";
  62                 pinctrl-0 = <&wlan_pins>;
  63         };
  64
  65         /* HS USB Host PHY on PORT 2 */
  66         hsusb2_phy: hsusb2_phy {
  67                 compatible = "usb-nop-xceiv";
  68                 reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */
  69                 clocks = <&auxclk1_ck>;
  70                 clock-names = "main_clk";
  71                 clock-frequency = <19200000>;
  72         };
  73
  74         /* HS USB Host PHY on PORT 3 */
  75         hsusb3_phy: hsusb3_phy {
  76                 compatible = "usb-nop-xceiv";
  77                 reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */
  78         };
  79
  80         tpd12s015: encoder {
  81                 compatible = "ti,tpd12s015";
  82
  83                 pinctrl-names = "default";
  84                 pinctrl-0 = <&tpd12s015_pins>;
  85
  86                 /* gpios defined in the board specific dts */
  87
  88                 ports {
  89                         #address-cells = <1>;
  90                         #size-cells = <0>;
  91
  92                         port@0 {
  93                                 reg = <0>;
  94
  95                                 tpd12s015_in: endpoint {
  96                                         remote-endpoint = <&hdmi_out>;
  97                                 };
  98                         };
  99
 100                         port@1 {
 101                                 reg = <1>;
 102
 103                                 tpd12s015_out: endpoint {
 104                                         remote-endpoint = <&hdmi_connector_in>;
 105                                 };
 106                         };
 107                 };
 108         };
 109
 110         hdmi0: connector {
 111                 compatible = "hdmi-connector";
 112                 label = "hdmi";
 113
 114                 type = "b";
 115
 116                 port {
 117                         hdmi_connector_in: endpoint {
 118                                 remote-endpoint = <&tpd12s015_out>;
 119                         };
 120                 };
 121         };
 122
 123         sound: sound {
 124                 compatible = "ti,abe-twl6040";
 125                 ti,model = "omap5-uevm";
 126
 127                 ti,jack-detection;
 128                 ti,mclk-freq = <19200000>;
 129
 130                 ti,mcpdm = <&mcpdm>;
 131
 132                 ti,twl6040 = <&twl6040>;
 133
 134                 /* Audio routing */
 135                 ti,audio-routing =
 136                         "Headset Stereophone", "HSOL",
 137                         "Headset Stereophone", "HSOR",
 138                         "Line Out", "AUXL",
 139                         "Line Out", "AUXR",
 140                         "HSMIC", "Headset Mic",
 141                         "Headset Mic", "Headset Mic Bias",
 142                         "AFML", "Line In",
 143                         "AFMR", "Line In";
 144         };
 145 };
 146
 147 &gpio8 {
 148         /* TI trees use GPIO instead of msecure, see also muxing */
 149         p234 {
 150                 gpio-hog;
 151                 gpios = <10 GPIO_ACTIVE_HIGH>;
 152                 output-high;
 153                 line-name = "gpio8_234/msecure";
 154         };
 155 };
 156
 157 &omap5_pmx_core {
 158         pinctrl-names = "default";
 159         pinctrl-0 = <
 160                         &usbhost_pins
 161                         &led_gpio_pins
 162         >;
 163
 164         twl6040_pins: pinmux_twl6040_pins {
 165                 pinctrl-single,pins = <
 166                         OMAP5_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE6)      /* mcspi1_somi.gpio5_141 */
 167                 >;
 168         };
 169
 170         mcpdm_pins: pinmux_mcpdm_pins {
 171                 pinctrl-single,pins = <
 172                         OMAP5_IOPAD(0x182, PIN_INPUT_PULLDOWN | MUX_MODE0)      /* abe_clks.abe_clks */
 173                         OMAP5_IOPAD(0x19c, PIN_INPUT_PULLDOWN | MUX_MODE0)      /* abemcpdm_ul_data.abemcpdm_ul_data */
 174                         OMAP5_IOPAD(0x19e, PIN_INPUT_PULLDOWN | MUX_MODE0)      /* abemcpdm_dl_data.abemcpdm_dl_data */
 175                         OMAP5_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE0)        /* abemcpdm_frame.abemcpdm_frame */
 176                         OMAP5_IOPAD(0x1a2, PIN_INPUT_PULLDOWN | MUX_MODE0)      /* abemcpdm_lb_clk.abemcpdm_lb_clk */
 177                 >;
 178         };
 179
 180         mcbsp1_pins: pinmux_mcbsp1_pins {
 181                 pinctrl-single,pins = <
 182                         OMAP5_IOPAD(0x18c, PIN_INPUT | MUX_MODE1)               /* abedmic_clk2.abemcbsp1_fsx */
 183                         OMAP5_IOPAD(0x18e, PIN_OUTPUT_PULLDOWN | MUX_MODE1)     /* abedmic_clk3.abemcbsp1_dx */
 184                         OMAP5_IOPAD(0x190, PIN_INPUT | MUX_MODE1)               /* abeslimbus1_clock.abemcbsp1_clkx */
 185                         OMAP5_IOPAD(0x192, PIN_INPUT_PULLDOWN | MUX_MODE1)      /* abeslimbus1_data.abemcbsp1_dr */
 186                 >;
 187         };
 188
 189         mcbsp2_pins: pinmux_mcbsp2_pins {
 190                 pinctrl-single,pins = <
 191                         OMAP5_IOPAD(0x194, PIN_INPUT_PULLDOWN | MUX_MODE0)      /* abemcbsp2_dr.abemcbsp2_dr */
 192                         OMAP5_IOPAD(0x196, PIN_OUTPUT_PULLDOWN | MUX_MODE0)     /* abemcbsp2_dx.abemcbsp2_dx */
 193                         OMAP5_IOPAD(0x198, PIN_INPUT | MUX_MODE0)               /* abemcbsp2_fsx.abemcbsp2_fsx */
 194                         OMAP5_IOPAD(0x19a, PIN_INPUT | MUX_MODE0)               /* abemcbsp2_clkx.abemcbsp2_clkx */
 195                 >;
 196         };
 197
 198         i2c1_pins: pinmux_i2c1_pins {
 199                 pinctrl-single,pins = <
 200                         OMAP5_IOPAD(0x1f2, PIN_INPUT_PULLUP | MUX_MODE0)        /* i2c1_scl */
 201                         OMAP5_IOPAD(0x1f4, PIN_INPUT_PULLUP | MUX_MODE0)        /* i2c1_sda */
 202                 >;
 203         };
 204
 205         mcspi2_pins: pinmux_mcspi2_pins {
 206                 pinctrl-single,pins = <
 207                         OMAP5_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0)               /*  mcspi2_clk */
 208                         OMAP5_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0)               /*  mcspi2_simo */
 209                         OMAP5_IOPAD(0x100, PIN_INPUT_PULLUP | MUX_MODE0)        /*  mcspi2_somi */
 210                         OMAP5_IOPAD(0x102, PIN_OUTPUT | MUX_MODE0)              /*  mcspi2_cs0 */
 211                 >;
 212         };
 213
 214         mcspi3_pins: pinmux_mcspi3_pins {
 215                 pinctrl-single,pins = <
 216                         OMAP5_IOPAD(0x0b8, PIN_INPUT | MUX_MODE1)               /*  mcspi3_somi */
 217                         OMAP5_IOPAD(0x0ba, PIN_INPUT | MUX_MODE1)               /*  mcspi3_cs0 */
 218                         OMAP5_IOPAD(0x0bc, PIN_INPUT | MUX_MODE1)               /*  mcspi3_simo */
 219                         OMAP5_IOPAD(0x0be, PIN_INPUT | MUX_MODE1)               /*  mcspi3_clk */
 220                 >;
 221         };
 222
 223         mmc3_pins: pinmux_mmc3_pins {
 224                 pinctrl-single,pins = <
 225                         OMAP5_IOPAD(0x01a4, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_clk */
 226                         OMAP5_IOPAD(0x01a6, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_cmd */
 227                         OMAP5_IOPAD(0x01a8, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data0 */
 228                         OMAP5_IOPAD(0x01aa, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data1 */
 229                         OMAP5_IOPAD(0x01ac, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data2 */
 230                         OMAP5_IOPAD(0x01ae, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data3 */
 231                 >;
 232         };
 233
 234         wlan_pins: pinmux_wlan_pins {
 235                 pinctrl-single,pins = <
 236                         OMAP5_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE6) /* mcspi1_clk.gpio5_140 */
 237                 >;
 238         };
 239
 240         /* TI trees use GPIO mode; msecure mode does not work reliably? */
 241         palmas_msecure_pins: palmas_msecure_pins {
 242                 pinctrl-single,pins = <
 243                         OMAP5_IOPAD(0x180, PIN_OUTPUT | MUX_MODE6) /* gpio8_234 */
 244                 >;
 245         };
 246
 247         usbhost_pins: pinmux_usbhost_pins {
 248                 pinctrl-single,pins = <
 249                         OMAP5_IOPAD(0x0c4, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */
 250                         OMAP5_IOPAD(0x0c6, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */
 251
 252                         OMAP5_IOPAD(0x1de, PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */
 253                         OMAP5_IOPAD(0x1e0, PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */
 254
 255                         OMAP5_IOPAD(0x0b0, PIN_OUTPUT | MUX_MODE6) /* gpio3_80 HUB_NRESET */
 256                         OMAP5_IOPAD(0x0ae, PIN_OUTPUT | MUX_MODE6) /* gpio3_79 ETH_NRESET */
 257                 >;
 258         };
 259
 260         led_gpio_pins: pinmux_led_gpio_pins {
 261                 pinctrl-single,pins = <
 262                         OMAP5_IOPAD(0x1d6, PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */
 263                 >;
 264         };
 265
 266         uart1_pins: pinmux_uart1_pins {
 267                 pinctrl-single,pins = <
 268                         OMAP5_IOPAD(0x0a0, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_cts */
 269                         OMAP5_IOPAD(0x0a2, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_tx.uart1_cts */
 270                         OMAP5_IOPAD(0x0a4, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rx.uart1_rts */
 271                         OMAP5_IOPAD(0x0a6, PIN_OUTPUT | MUX_MODE0) /* uart1_rx.uart1_rts */
 272                 >;
 273         };
 274
 275         uart3_pins: pinmux_uart3_pins {
 276                 pinctrl-single,pins = <
 277                         OMAP5_IOPAD(0x1da, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */
 278                         OMAP5_IOPAD(0x1dc, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */
 279                 >;
 280         };
 281
 282         uart5_pins: pinmux_uart5_pins {
 283                 pinctrl-single,pins = <
 284                         OMAP5_IOPAD(0x1b0, PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_rx.uart5_rx */
 285                         OMAP5_IOPAD(0x1b2, PIN_OUTPUT | MUX_MODE0) /* uart5_tx.uart5_tx */
 286                         OMAP5_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_cts.uart5_rts */
 287                         OMAP5_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE0) /* uart5_cts.uart5_rts */
 288                 >;
 289         };
 290
 291         dss_hdmi_pins: pinmux_dss_hdmi_pins {
 292                 pinctrl-single,pins = <
 293                         OMAP5_IOPAD(0x13c, PIN_INPUT | MUX_MODE0)       /* hdmi_cec.hdmi_cec */
 294                         OMAP5_IOPAD(0x140, PIN_INPUT | MUX_MODE0)       /* hdmi_ddc_scl.hdmi_ddc_scl */
 295                         OMAP5_IOPAD(0x142, PIN_INPUT | MUX_MODE0)       /* hdmi_ddc_sda.hdmi_ddc_sda */
 296                 >;
 297         };
 298
 299         tpd12s015_pins: pinmux_tpd12s015_pins {
 300                 pinctrl-single,pins = <
 301                         OMAP5_IOPAD(0x13e, PIN_INPUT_PULLDOWN | MUX_MODE6)      /* hdmi_hpd.gpio7_193 */
 302                 >;
 303         };
 304 };
 305
 306 &omap5_pmx_wkup {
 307         pinctrl-names = "default";
 308         pinctrl-0 = <
 309                         &usbhost_wkup_pins
 310         >;
 311
 312         palmas_sys_nirq_pins: pinmux_palmas_sys_nirq_pins {
 313                 pinctrl-single,pins = <
 314                         OMAP5_IOPAD(0x068, PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1 */
 315                 >;
 316         };
 317
 318         usbhost_wkup_pins: pinmux_usbhost_wkup_pins {
 319                 pinctrl-single,pins = <
 320                         OMAP5_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */
 321                 >;
 322         };
 323
 324         wlcore_irq_pin: pinmux_wlcore_irq_pin {
 325                 pinctrl-single,pins = <
 326                         OMAP5_IOPAD(0x40, PIN_INPUT | MUX_MODE6)        /* llia_wakereqin.gpio1_wk14 */
 327                 >;
 328         };
 329 };
 330
 331 &mmc1 {
 332         vmmc-supply = <&ldo9_reg>;
 333         bus-width = <4>;
 334 };
 335
 336 &mmc2 {
 337         vmmc-supply = <&vmmcsd_fixed>;
 338         bus-width = <8>;
 339         ti,non-removable;
 340 };
 341
 342 &mmc3 {
 343         vmmc-supply = <&vmmcsdio_fixed>;
 344         mmc-pwrseq = <&mmc3_pwrseq>;
 345         bus-width = <4>;
 346         non-removable;
 347         cap-power-off-card;
 348         pinctrl-names = "default";
 349         pinctrl-0 = <&mmc3_pins>;
 350         interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
 351                                &omap5_pmx_core 0x16a>;
 352
 353         #address-cells = <1>;
 354         #size-cells = <0>;
 355         wlcore: wlcore@2 {
 356                 compatible = "ti,wl1271";
 357                 reg = <2>;
 358                 pinctrl-names = "default";
 359                 pinctrl-0 = <&wlcore_irq_pin>;
 360                 interrupt-parent = <&gpio1>;
 361                 interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;  /* gpio 14 */
 362                 ref-clock-frequency = <26000000>;
 363         };
 364 };
 365
 366 &mmc4 {
 367         status = "disabled";
 368 };
 369
 370 &mmc5 {
 371         status = "disabled";
 372 };
 373
 374 &i2c1 {
 375         pinctrl-names = "default";
 376         pinctrl-0 = <&i2c1_pins>;
 377
 378         clock-frequency = <400000>;
 379
 380         palmas: palmas@48 {
 381                 compatible = "ti,palmas";
 382                 interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
 383                 reg = <0x48>;
 384                 interrupt-controller;
 385                 #interrupt-cells = <2>;
 386                 ti,system-power-controller;
 387                 ti,mux-pad1 = <0xa1>;
 388                 ti,mux-pad2 = <0x1b>;
 389                 pinctrl-names = "default";
 390                 pinctrl-0 = <&palmas_sys_nirq_pins &palmas_msecure_pins>;
 391
 392                 palmas_gpio: gpio {
 393                         compatible = "ti,palmas-gpio";
 394                         gpio-controller;
 395                         #gpio-cells = <2>;
 396                 };
 397
 398                 extcon_usb3: palmas_usb {
 399                         compatible = "ti,palmas-usb-vid";
 400                         ti,enable-vbus-detection;
 401                         ti,enable-id-detection;
 402                         ti,wakeup;
 403                         id-gpios = <&palmas_gpio 0 GPIO_ACTIVE_HIGH>;
 404                 };
 405
 406                 clk32kgaudio: palmas_clk32k@1 {
 407                         compatible = "ti,palmas-clk32kgaudio";
 408                         #clock-cells = <0>;
 409                 };
 410
 411                 rtc {
 412                         compatible = "ti,palmas-rtc";
 413                         interrupt-parent = <&palmas>;
 414                         interrupts = <8 IRQ_TYPE_NONE>;
 415                         ti,backup-battery-chargeable;
 416                         ti,backup-battery-charge-high-current;
 417                 };
 418
 419                 gpadc: gpadc {
 420                         compatible = "ti,palmas-gpadc";
 421                         interrupts = <18 0
 422                                       16 0
 423                                       17 0>;
 424                         #io-channel-cells = <1>;
 425                         ti,channel0-current-microamp = <5>;
 426                         ti,channel3-current-microamp = <10>;
 427                 };
 428
 429                 palmas_pmic {
 430                         compatible = "ti,palmas-pmic";
 431                         interrupt-parent = <&palmas>;
 432                         interrupts = <14 IRQ_TYPE_NONE>;
 433                         interrupt-names = "short-irq";
 434
 435                         ti,ldo6-vibrator;
 436
 437                         smps123-in-supply = <&vsys_cobra>;
 438                         smps45-in-supply = <&vsys_cobra>;
 439                         smps6-in-supply = <&vsys_cobra>;
 440                         smps7-in-supply = <&vsys_cobra>;
 441                         smps8-in-supply = <&vsys_cobra>;
 442                         smps9-in-supply = <&vsys_cobra>;
 443                         smps10_out2-in-supply = <&vsys_cobra>;
 444                         smps10_out1-in-supply = <&vsys_cobra>;
 445                         ldo1-in-supply = <&vsys_cobra>;
 446                         ldo2-in-supply = <&vsys_cobra>;
 447                         ldo3-in-supply = <&vdds_1v8_main>;
 448                         ldo4-in-supply = <&vdds_1v8_main>;
 449                         ldo5-in-supply = <&vsys_cobra>;
 450                         ldo6-in-supply = <&vdds_1v8_main>;
 451                         ldo7-in-supply = <&vsys_cobra>;
 452                         ldo8-in-supply = <&vsys_cobra>;
 453                         ldo9-in-supply = <&vmmcsd_fixed>;
 454                         ldoln-in-supply = <&vsys_cobra>;
 455                         ldousb-in-supply = <&vsys_cobra>;
 456
 457                         regulators {
 458                                 smps123_reg: smps123 {
 459                                         /* VDD_OPP_MPU */
 460                                         regulator-name = "smps123";
 461                                         regulator-min-microvolt = < 600000>;
 462                                         regulator-max-microvolt = <1500000>;
 463                                         regulator-always-on;
 464                                         regulator-boot-on;
 465                                 };
 466
 467                                 smps45_reg: smps45 {
 468                                         /* VDD_OPP_MM */
 469                                         regulator-name = "smps45";
 470                                         regulator-min-microvolt = < 600000>;
 471                                         regulator-max-microvolt = <1310000>;
 472                                         regulator-always-on;
 473                                         regulator-boot-on;
 474                                 };
 475
 476                                 smps6_reg: smps6 {
 477                                         /* VDD_DDR3 - over VDD_SMPS6 */
 478                                         regulator-name = "smps6";
 479                                         regulator-min-microvolt = <1350000>;
 480                                         regulator-max-microvolt = <1350000>;
 481                                         regulator-always-on;
 482                                         regulator-boot-on;
 483                                 };
 484
 485                                 smps7_reg: smps7 {
 486                                         /* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
 487                                         regulator-name = "smps7";
 488                                         regulator-min-microvolt = <1800000>;
 489                                         regulator-max-microvolt = <1800000>;
 490                                         regulator-always-on;
 491                                         regulator-boot-on;
 492                                 };
 493
 494                                 smps8_reg: smps8 {
 495                                         /* VDD_OPP_CORE */
 496                                         regulator-name = "smps8";
 497                                         regulator-min-microvolt = < 600000>;
 498                                         regulator-max-microvolt = <1310000>;
 499                                         regulator-always-on;
 500                                         regulator-boot-on;
 501                                 };
 502
 503                                 smps9_reg: smps9 {
 504                                         /* VDDA_2v1_AUD over VDD_2v1 */
 505                                         regulator-name = "smps9";
 506                                         regulator-min-microvolt = <2100000>;
 507                                         regulator-max-microvolt = <2100000>;
 508                                         ti,smps-range = <0x80>;
 509                                 };
 510
 511                                 smps10_out2_reg: smps10_out2 {
 512                                         /* VBUS_5V_OTG */
 513                                         regulator-name = "smps10_out2";
 514                                         regulator-min-microvolt = <5000000>;
 515                                         regulator-max-microvolt = <5000000>;
 516                                         regulator-always-on;
 517                                         regulator-boot-on;
 518                                 };
 519
 520                                 smps10_out1_reg: smps10_out1 {
 521                                         /* VBUS_5V_OTG */
 522                                         regulator-name = "smps10_out1";
 523                                         regulator-min-microvolt = <5000000>;
 524                                         regulator-max-microvolt = <5000000>;
 525                                 };
 526
 527                                 ldo1_reg: ldo1 {
 528                                         /* VDDAPHY_CAM: vdda_csiport */
 529                                         regulator-name = "ldo1";
 530                                         regulator-min-microvolt = <1800000>;
 531                                         regulator-max-microvolt = <1800000>;
 532                                 };
 533
 534                                 ldo2_reg: ldo2 {
 535                                         /* VCC_2V8_DISP: Does not go anywhere */
 536                                         regulator-name = "ldo2";
 537                                         regulator-min-microvolt = <2800000>;
 538                                         regulator-max-microvolt = <2800000>;
 539                                         /* Unused */
 540                                         status = "disabled";
 541                                 };
 542
 543                                 ldo3_reg: ldo3 {
 544                                         /* VDDAPHY_MDM: vdda_lli */
 545                                         regulator-name = "ldo3";
 546                                         regulator-min-microvolt = <1500000>;
 547                                         regulator-max-microvolt = <1500000>;
 548                                         regulator-boot-on;
 549                                         /* Only if Modem is used */
 550                                         status = "disabled";
 551                                 };
 552
 553                                 ldo4_reg: ldo4 {
 554                                         /* VDDAPHY_DISP: vdda_dsiport/hdmi */
 555                                         regulator-name = "ldo4";
 556                                         regulator-min-microvolt = <1800000>;
 557                                         regulator-max-microvolt = <1800000>;
 558                                 };
 559
 560                                 ldo5_reg: ldo5 {
 561                                         /* VDDA_1V8_PHY: usb/sata/hdmi.. */
 562                                         regulator-name = "ldo5";
 563                                         regulator-min-microvolt = <1800000>;
 564                                         regulator-max-microvolt = <1800000>;
 565                                         regulator-always-on;
 566                                         regulator-boot-on;
 567                                 };
 568
 569                                 ldo6_reg: ldo6 {
 570                                         /* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */
 571                                         regulator-name = "ldo6";
 572                                         regulator-min-microvolt = <1200000>;
 573                                         regulator-max-microvolt = <1200000>;
 574                                         regulator-always-on;
 575                                         regulator-boot-on;
 576                                 };
 577
 578                                 ldo7_reg: ldo7 {
 579                                         /* VDD_VPP: vpp1 */
 580                                         regulator-name = "ldo7";
 581                                         regulator-min-microvolt = <2000000>;
 582                                         regulator-max-microvolt = <2000000>;
 583                                         /* Only for efuse reprograming! */
 584                                         status = "disabled";
 585                                 };
 586
 587                                 ldo8_reg: ldo8 {
 588                                         /* VDD_3v0: Does not go anywhere */
 589                                         regulator-name = "ldo8";
 590                                         regulator-min-microvolt = <3000000>;
 591                                         regulator-max-microvolt = <3000000>;
 592                                         regulator-boot-on;
 593                                         /* Unused */
 594                                         status = "disabled";
 595                                 };
 596
 597                                 ldo9_reg: ldo9 {
 598                                         /* VCC_DV_SDIO: vdds_sdcard */
 599                                         regulator-name = "ldo9";
 600                                         regulator-min-microvolt = <1800000>;
 601                                         regulator-max-microvolt = <3000000>;
 602                                         regulator-boot-on;
 603                                 };
 604
 605                                 ldoln_reg: ldoln {
 606                                         /* VDDA_1v8_REF: vdds_osc/mm_l4per.. */
 607                                         regulator-name = "ldoln";
 608                                         regulator-min-microvolt = <1800000>;
 609                                         regulator-max-microvolt = <1800000>;
 610                                         regulator-always-on;
 611                                         regulator-boot-on;
 612                                 };
 613
 614                                 ldousb_reg: ldousb {
 615                                         /* VDDA_3V_USB: VDDA_USBHS33 */
 616                                         regulator-name = "ldousb";
 617                                         regulator-min-microvolt = <3250000>;
 618                                         regulator-max-microvolt = <3250000>;
 619                                         regulator-always-on;
 620                                         regulator-boot-on;
 621                                 };
 622
 623                                 regen3_reg: regen3 {
 624                                         /* REGEN3 controls LDO9 supply to card */
 625                                         regulator-name = "regen3";
 626                                         regulator-always-on;
 627                                         regulator-boot-on;
 628                                 };
 629                         };
 630                 };
 631
 632                 palmas_power_button: palmas_power_button {
 633                         compatible = "ti,palmas-pwrbutton";
 634                         interrupt-parent = <&palmas>;
 635                         interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
 636                         wakeup-source;
 637                 };
 638         };
 639
 640         twl6040: twl@4b {
 641                 compatible = "ti,twl6040";
 642                 #clock-cells = <0>;
 643                 reg = <0x4b>;
 644
 645                 pinctrl-names = "default";
 646                 pinctrl-0 = <&twl6040_pins>;
 647
 648                 interrupts = <GIC_SPI 119 IRQ_TYPE_NONE>; /* IRQ_SYS_2N cascaded to gic */
 649
 650                 /* audpwron gpio defined in the board specific dts */
 651
 652                 vio-supply = <&smps7_reg>;
 653                 v2v1-supply = <&smps9_reg>;
 654                 enable-active-high;
 655
 656                 clocks = <&clk32kgaudio>;
 657                 clock-names = "clk32k";
 658         };
 659 };
 660
 661 &mcpdm {
 662         pinctrl-names = "default";
 663         pinctrl-0 = <&mcpdm_pins>;
 664
 665         clocks = <&twl6040>;
 666         clock-names = "pdmclk";
 667
 668         status = "okay";
 669 };
 670
 671 &mcbsp1 {
 672         pinctrl-names = "default";
 673         pinctrl-0 = <&mcbsp1_pins>;
 674         status = "okay";
 675 };
 676
 677 &mcbsp2 {
 678         pinctrl-names = "default";
 679         pinctrl-0 = <&mcbsp2_pins>;
 680         status = "okay";
 681 };
 682
 683 &usbhshost {
 684         port2-mode = "ehci-hsic";
 685         port3-mode = "ehci-hsic";
 686 };
 687
 688 &usbhsehci {
 689         phys = <0 &hsusb2_phy &hsusb3_phy>;
 690 };
 691
 692 &usb3 {
 693         extcon = <&extcon_usb3>;
 694         vbus-supply = <&smps10_out1_reg>;
 695 };
 696
 697 &mcspi1 {
 698
 699 };
 700
 701 &mcspi2 {
 702         pinctrl-names = "default";
 703         pinctrl-0 = <&mcspi2_pins>;
 704 };
 705
 706 &mcspi3 {
 707         pinctrl-names = "default";
 708         pinctrl-0 = <&mcspi3_pins>;
 709 };
 710
 711 &uart1 {
 712         pinctrl-names = "default";
 713         pinctrl-0 = <&uart1_pins>;
 714 };
 715
 716 &uart3 {
 717         pinctrl-names = "default";
 718         pinctrl-0 = <&uart3_pins>;
 719         interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
 720                               <&omap5_pmx_core 0x19c>;
 721 };
 722
 723 &uart5 {
 724         pinctrl-names = "default";
 725         pinctrl-0 = <&uart5_pins>;
 726 };
 727
 728 &cpu0 {
 729         cpu0-supply = <&smps123_reg>;
 730 };
 731
 732 &dss {
 733         status = "ok";
 734 };
 735
 736 &hdmi {
 737         status = "ok";
 738
 739         /* vdda-supply populated in board specific dts file */
 740
 741         pinctrl-names = "default";
 742         pinctrl-0 = <&dss_hdmi_pins>;
 743
 744         port {
 745                 hdmi_out: endpoint {
 746                         remote-endpoint = <&tpd12s015_in>;
 747                 };
 748         };
 749 };