arch/arm/boot/dts/omap4-droid4-xt894.dts

   1 /*
   2  * This program is free software; you can redistribute it and/or modify
   3  * it under the terms of the GNU General Public License version 2 as
   4  * published by the Free Software Foundation.
   5  */
   6 /dts-v1/;
   7
   8 #include <dt-bindings/input/input.h>
   9 #include "omap443x.dtsi"
  10 #include "motorola-cpcap-mapphone.dtsi"
  11
  12 / {
  13         model = "Motorola Droid 4 XT894";
  14         compatible = "motorola,droid4", "ti,omap4430", "ti,omap4";
  15
  16         chosen {
  17                 stdout-path = &uart3;
  18         };
  19
  20         aliases {
  21                 display0 = &lcd0;
  22                 display1 = &hdmi0;
  23         };
  24
  25         /*
  26          * We seem to have only 1021 MB accessible, 1021 - 1022 is locked,
  27          * then 1023 - 1024 seems to contain mbm.
  28          */
  29         memory {
  30                 device_type = "memory";
  31                 reg = <0x80000000 0x3fd00000>;  /* 1021 MB */
  32         };
  33
  34         /* Poweroff GPIO probably connected to CPCAP */
  35         gpio-poweroff {
  36                 compatible = "gpio-poweroff";
  37                 pinctrl-0 = <&poweroff_gpio>;
  38                 pinctrl-names = "default";
  39                 gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;    /* gpio50 */
  40         };
  41
  42         hdmi0: connector {
  43                 compatible = "hdmi-connector";
  44                 pinctrl-0 = <&hdmi_hpd_gpio>;
  45                 pinctrl-names = "default";
  46                 label = "hdmi";
  47                 type = "d";
  48
  49                 hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;       /* gpio63 */
  50
  51                 port {
  52                         hdmi_connector_in: endpoint {
  53                                 remote-endpoint = <&hdmi_out>;
  54                         };
  55                 };
  56         };
  57
  58         /*
  59          * HDMI 5V regulator probably sourced from battery. Let's keep
  60          * keep this as always enabled for HDMI to work until we've
  61          * figured what the encoder chip is.
  62          */
  63         hdmi_regulator: regulator-hdmi {
  64                 compatible = "regulator-fixed";
  65                 regulator-name = "hdmi";
  66                 regulator-min-microvolt = <5000000>;
  67                 regulator-max-microvolt = <5000000>;
  68                 gpio = <&gpio2 27 GPIO_ACTIVE_HIGH>;    /* gpio59 */
  69                 enable-active-high;
  70                 regulator-always-on;
  71         };
  72
  73         /* FS USB Host PHY on port 1 for mdm6600 */
  74         fsusb1_phy: usb-phy@1 {
  75                 compatible = "motorola,mapphone-mdm6600";
  76                 pinctrl-0 = <&usb_mdm6600_pins>;
  77                 pinctrl-names = "default";
  78                 enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;     /* gpio_95 */
  79                 power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;     /* gpio_54 */
  80                 reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;     /* gpio_49 */
  81                 /* mode: gpio_148 gpio_149 */
  82                 motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>,
  83                                       <&gpio5 21 GPIO_ACTIVE_HIGH>;
  84                 /* cmd: gpio_103 gpio_104 gpio_142 */
  85                 motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>,
  86                                      <&gpio4 8 GPIO_ACTIVE_HIGH>,
  87                                      <&gpio5 14 GPIO_ACTIVE_HIGH>;
  88                 /* status: gpio_52 gpio_53 gpio_55 */
  89                 motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>,
  90                                         <&gpio2 21 GPIO_ACTIVE_HIGH>,
  91                                         <&gpio2 23 GPIO_ACTIVE_HIGH>;
  92                 #phy-cells = <0>;
  93         };
  94
  95         /* HS USB host TLL nop-phy on port 2 for w3glte */
  96         hsusb2_phy: usb-phy@2 {
  97                 compatible = "usb-nop-xceiv";
  98                 #phy-cells = <0>;
  99         };
 100
 101         /* LCD regulator from sw5 source */
 102         lcd_regulator: regulator-lcd {
 103                 compatible = "regulator-fixed";
 104                 regulator-name = "lcd";
 105                 regulator-min-microvolt = <5050000>;
 106                 regulator-max-microvolt = <5050000>;
 107                 gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>;     /* gpio96 */
 108                 enable-active-high;
 109                 vin-supply = <&sw5>;
 110         };
 111
 112         /* This is probably coming straight from the battery.. */
 113         wl12xx_vmmc: regulator-wl12xx {
 114                 compatible = "regulator-fixed";
 115                 regulator-name = "vwl1271";
 116                 regulator-min-microvolt = <1650000>;
 117                 regulator-max-microvolt = <1650000>;
 118                 gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;    /* gpio94 */
 119                 startup-delay-us = <70000>;
 120                 enable-active-high;
 121         };
 122
 123         gpio_keys {
 124                 compatible = "gpio-keys";
 125
 126                 volume_down {
 127                         label = "Volume Down";
 128                         gpios = <&gpio5 26 GPIO_ACTIVE_LOW>; /* gpio154 */
 129                         linux,code = <KEY_VOLUMEDOWN>;
 130                         linux,can-disable;
 131                         /* Value above 7.95ms for no GPIO hardware debounce */
 132                         debounce-interval = <10>;
 133                 };
 134
 135                 slider {
 136                         label = "Keypad Slide";
 137                         gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio122 */
 138                         linux,input-type = <EV_SW>;
 139                         linux,code = <SW_KEYPAD_SLIDE>;
 140                         linux,can-disable;
 141                         /* Value above 7.95ms for no GPIO hardware debounce */
 142                         debounce-interval = <10>;
 143                 };
 144         };
 145
 146         soundcard {
 147                 compatible = "audio-graph-card";
 148                 label = "Droid 4 Audio";
 149
 150                 simple-graph-card,widgets =
 151                         "Speaker", "Earpiece",
 152                         "Speaker", "Loudspeaker",
 153                         "Headphone", "Headphone Jack",
 154                         "Microphone", "Internal Mic";
 155
 156                 simple-graph-card,routing =
 157                         "Earpiece", "EP",
 158                         "Loudspeaker", "SPKR",
 159                         "Headphone Jack", "HSL",
 160                         "Headphone Jack", "HSR",
 161                         "MICR", "Internal Mic";
 162
 163                 dais = <&mcbsp2_port>, <&mcbsp3_port>;
 164         };
 165
 166         pwm8: dmtimer-pwm-8 {
 167                 pinctrl-names = "default";
 168                 pinctrl-0 = <&vibrator_direction_pin>;
 169
 170                 compatible = "ti,omap-dmtimer-pwm";
 171                 #pwm-cells = <3>;
 172                 ti,timers = <&timer8>;
 173                 ti,clock-source = <0x01>;
 174         };
 175
 176         pwm9: dmtimer-pwm-9 {
 177                 pinctrl-names = "default";
 178                 pinctrl-0 = <&vibrator_enable_pin>;
 179
 180                 compatible = "ti,omap-dmtimer-pwm";
 181                 #pwm-cells = <3>;
 182                 ti,timers = <&timer9>;
 183                 ti,clock-source = <0x01>;
 184         };
 185
 186         vibrator {
 187                 compatible = "pwm-vibrator";
 188                 pwms = <&pwm9 0 10000000 0>, <&pwm8 0 10000000 0>;
 189                 pwm-names = "enable", "direction";
 190                 direction-duty-cycle-ns = <10000000>;
 191         };
 192 };
 193
 194 &dss {
 195         status = "okay";
 196 };
 197
 198 &dsi1 {
 199         status = "okay";
 200         vdd-supply = <&vcsi>;
 201
 202         port {
 203                 dsi1_out_ep: endpoint {
 204                         remote-endpoint = <&lcd0_in>;
 205                         lanes = <0 1 2 3 4 5>;
 206                 };
 207         };
 208
 209         lcd0: display {
 210                 compatible = "panel-dsi-cm";
 211                 label = "lcd0";
 212                 vddi-supply = <&lcd_regulator>;
 213                 reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;      /* gpio101 */
 214
 215                 width-mm = <50>;
 216                 height-mm = <89>;
 217                 backlight = <&lcd_backlight>;
 218
 219                 panel-timing {
 220                         clock-frequency = <0>;          /* Calculated by dsi */
 221
 222                         hback-porch = <2>;
 223                         hactive = <540>;
 224                         hfront-porch = <0>;
 225                         hsync-len = <2>;
 226
 227                         vback-porch = <1>;
 228                         vactive = <960>;
 229                         vfront-porch = <0>;
 230                         vsync-len = <1>;
 231
 232                         hsync-active = <0>;
 233                         vsync-active = <0>;
 234                         de-active = <1>;
 235                         pixelclk-active = <1>;
 236                 };
 237
 238                 port {
 239                         lcd0_in: endpoint {
 240                                 remote-endpoint = <&dsi1_out_ep>;
 241                         };
 242                 };
 243         };
 244 };
 245
 246 &hdmi {
 247         status = "okay";
 248         pinctrl-0 = <&dss_hdmi_pins>;
 249         pinctrl-names = "default";
 250         vdda-supply = <&vdac>;
 251
 252         port {
 253                 hdmi_out: endpoint {
 254                         remote-endpoint = <&hdmi_connector_in>;
 255                         lanes = <1 0 3 2 5 4 7 6>;
 256                 };
 257         };
 258 };
 259
 260 &i2c1 {
 261         tmp105@48 {
 262                 compatible = "ti,tmp105";
 263                 reg = <0x48>;
 264                 pinctrl-0 = <&tmp105_irq>;
 265                 pinctrl-names = "default";
 266                 /* kpd_row0.gpio_178 */
 267                 interrupts-extended = <&gpio6 18 IRQ_TYPE_EDGE_FALLING
 268                                        &omap4_pmx_core 0x14e>;
 269                 interrupt-names = "irq", "wakeup";
 270                 wakeup-source;
 271         };
 272 };
 273
 274 &keypad {
 275         keypad,num-rows = <8>;
 276         keypad,num-columns = <8>;
 277         linux,keymap = <
 278
 279         /* Row 1 */
 280         MATRIX_KEY(0, 2, KEY_1)
 281         MATRIX_KEY(0, 6, KEY_2)
 282         MATRIX_KEY(2, 3, KEY_3)
 283         MATRIX_KEY(0, 7, KEY_4)
 284         MATRIX_KEY(0, 4, KEY_5)
 285         MATRIX_KEY(5, 5, KEY_6)
 286         MATRIX_KEY(0, 1, KEY_7)
 287         MATRIX_KEY(0, 5, KEY_8)
 288         MATRIX_KEY(0, 0, KEY_9)
 289         MATRIX_KEY(1, 6, KEY_0)
 290
 291         /* Row 2 */
 292         MATRIX_KEY(3, 4, KEY_APOSTROPHE)
 293         MATRIX_KEY(7, 6, KEY_Q)
 294         MATRIX_KEY(7, 7, KEY_W)
 295         MATRIX_KEY(7, 2, KEY_E)
 296         MATRIX_KEY(1, 0, KEY_R)
 297         MATRIX_KEY(4, 4, KEY_T)
 298         MATRIX_KEY(1, 2, KEY_Y)
 299         MATRIX_KEY(6, 7, KEY_U)
 300         MATRIX_KEY(2, 2, KEY_I)
 301         MATRIX_KEY(5, 6, KEY_O)
 302         MATRIX_KEY(3, 7, KEY_P)
 303         MATRIX_KEY(6, 5, KEY_BACKSPACE)
 304
 305         /* Row 3 */
 306         MATRIX_KEY(5, 4, KEY_TAB)
 307         MATRIX_KEY(5, 7, KEY_A)
 308         MATRIX_KEY(2, 7, KEY_S)
 309         MATRIX_KEY(7, 0, KEY_D)
 310         MATRIX_KEY(2, 6, KEY_F)
 311         MATRIX_KEY(6, 2, KEY_G)
 312         MATRIX_KEY(6, 6, KEY_H)
 313         MATRIX_KEY(1, 4, KEY_J)
 314         MATRIX_KEY(3, 1, KEY_K)
 315         MATRIX_KEY(2, 1, KEY_L)
 316         MATRIX_KEY(4, 6, KEY_ENTER)
 317
 318         /* Row 4 */
 319         MATRIX_KEY(3, 6, KEY_LEFTSHIFT)         /* KEY_CAPSLOCK */
 320         MATRIX_KEY(6, 1, KEY_Z)
 321         MATRIX_KEY(7, 4, KEY_X)
 322         MATRIX_KEY(5, 1, KEY_C)
 323         MATRIX_KEY(1, 7, KEY_V)
 324         MATRIX_KEY(2, 4, KEY_B)
 325         MATRIX_KEY(4, 1, KEY_N)
 326         MATRIX_KEY(1, 1, KEY_M)
 327         MATRIX_KEY(3, 5, KEY_COMMA)
 328         MATRIX_KEY(5, 2, KEY_DOT)
 329         MATRIX_KEY(6, 3, KEY_UP)
 330         MATRIX_KEY(7, 3, KEY_OK)
 331
 332         /* Row 5 */
 333         MATRIX_KEY(2, 5, KEY_LEFTCTRL)          /* KEY_LEFTSHIFT */
 334         MATRIX_KEY(4, 5, KEY_LEFTALT)           /* SYM */
 335         MATRIX_KEY(6, 0, KEY_MINUS)
 336         MATRIX_KEY(4, 7, KEY_EQUAL)
 337         MATRIX_KEY(1, 5, KEY_SPACE)
 338         MATRIX_KEY(3, 2, KEY_SLASH)
 339         MATRIX_KEY(4, 3, KEY_LEFT)
 340         MATRIX_KEY(5, 3, KEY_DOWN)
 341         MATRIX_KEY(3, 3, KEY_RIGHT)
 342
 343         /* Side buttons, KEY_VOLUMEDOWN and KEY_PWER are on CPCAP? */
 344         MATRIX_KEY(5, 0, KEY_VOLUMEUP)
 345         >;
 346 };
 347
 348 &mmc1 {
 349         vmmc-supply = <&vwlan2>;
 350         bus-width = <4>;
 351         cd-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; /* gpio176 */
 352 };
 353
 354 &mmc2 {
 355         vmmc-supply = <&vsdio>;
 356         bus-width = <8>;
 357         ti,non-removable;
 358 };
 359
 360 &mmc3 {
 361         vmmc-supply = <&wl12xx_vmmc>;
 362         interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
 363                                &omap4_pmx_core 0xde>;
 364
 365         non-removable;
 366         bus-width = <4>;
 367         cap-power-off-card;
 368
 369         #address-cells = <1>;
 370         #size-cells = <0>;
 371         wlcore: wlcore@2 {
 372                 compatible = "ti,wl1285", "ti,wl1283";
 373                 reg = <2>;
 374                 interrupt-parent = <&gpio4>;
 375                 interrupts = <4 IRQ_TYPE_EDGE_RISING>; /* gpio100 */
 376                 ref-clock-frequency = <26000000>;
 377                 tcxo-clock-frequency = <26000000>;
 378         };
 379 };
 380
 381 &i2c1 {
 382         lm3532@38 {
 383                 compatible = "ti,lm3532";
 384                 reg = <0x38>;
 385
 386                 enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
 387
 388                 lcd_backlight: backlight {
 389                         compatible = "ti,lm3532-backlight";
 390
 391                         lcd {
 392                                 led-sources = <0 1 2>;
 393                                 ramp-up-msec = <1>;
 394                                 ramp-down-msec = <0>;
 395                         };
 396                 };
 397         };
 398 };
 399
 400 &i2c2 {
 401         touchscreen@4a {
 402                 compatible = "atmel,maxtouch";
 403                 reg = <0x4a>;
 404                 pinctrl-names = "default";
 405                 pinctrl-0 = <&touchscreen_pins>;
 406
 407                 reset-gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; /* gpio173 */
 408
 409                 /* gpio_183 with sys_nirq2 pad as wakeup */
 410                 interrupts-extended = <&gpio6 23 IRQ_TYPE_EDGE_FALLING>,
 411                                       <&omap4_pmx_core 0x160>;
 412                 interrupt-names = "irq", "wakeup";
 413                 wakeup-source;
 414         };
 415
 416         isl29030@44 {
 417                 compatible = "isil,isl29030";
 418                 reg = <0x44>;
 419
 420                 pinctrl-names = "default";
 421                 pinctrl-0 = <&als_proximity_pins>;
 422
 423                 interrupt-parent = <&gpio6>;
 424                 interrupts = <17 IRQ_TYPE_LEVEL_LOW>; /* gpio177 */
 425         };
 426 };
 427
 428 &omap4_pmx_core {
 429
 430         /* hdmi_hpd.gpio_63 */
 431         hdmi_hpd_gpio: pinmux_hdmi_hpd_pins {
 432                 pinctrl-single,pins = <
 433                 OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3)
 434                 >;
 435         };
 436
 437         /* hdmi_cec.hdmi_cec, hdmi_scl.hdmi_scl, hdmi_sda.hdmi_sda */
 438         dss_hdmi_pins: pinmux_dss_hdmi_pins {
 439                 pinctrl-single,pins = <
 440                 OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)
 441                 OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0)
 442                 OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0)
 443                 >;
 444         };
 445
 446         /* gpmc_ncs0.gpio_50 */
 447         poweroff_gpio: pinmux_poweroff_pins {
 448                 pinctrl-single,pins = <
 449                 OMAP4_IOPAD(0x074, PIN_OUTPUT_PULLUP | MUX_MODE3)
 450                 >;
 451         };
 452
 453         /* kpd_row0.gpio_178 */
 454         tmp105_irq: pinmux_tmp105_irq {
 455                 pinctrl-single,pins = <
 456                 OMAP4_IOPAD(0x18e, PIN_INPUT_PULLUP | MUX_MODE3)
 457                 >;
 458         };
 459
 460         usb_gpio_mux_sel1: pinmux_usb_gpio_mux_sel1_pins {
 461                 /* gpio_60 */
 462                 pinctrl-single,pins = <
 463                 OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3)
 464                 >;
 465         };
 466
 467         touchscreen_pins: pinmux_touchscreen_pins {
 468                 pinctrl-single,pins = <
 469                 OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3)
 470                 OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3)
 471                 >;
 472         };
 473
 474         als_proximity_pins: pinmux_als_proximity_pins {
 475                 pinctrl-single,pins = <
 476                 OMAP4_IOPAD(0x18c, PIN_INPUT_PULLUP | MUX_MODE3)
 477                 >;
 478         };
 479
 480         usb_mdm6600_pins: pinmux_usb_mdm6600_pins {
 481                 pinctrl-single,pins = <
 482                 /* enable 0x4a1000d8 usbb1_ulpitll_dat7.gpio_95 ag16 */
 483                 OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3)
 484
 485                 /* power 0x4a10007c gpmc_nwp.gpio_54 c25 */
 486                 OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)
 487
 488                 /* reset 0x4a100072 gpmc_a25.gpio_49 d20 */
 489                 OMAP4_IOPAD(0x072, PIN_OUTPUT | MUX_MODE3)
 490
 491                 /* mode0/bpwake 0x4a10014e sdmmc5_dat1.gpio_148 af4 */
 492                 OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3)
 493
 494                 /* mode1/apwake 0x4a100150 sdmmc5_dat2.gpio_149 ag3 */
 495                 OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3)
 496
 497                 /* status0 0x4a10007e gpmc_clk.gpio_55 b22 */
 498                 OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3)
 499
 500                 /* status1 0x4a10007a gpmc_ncs3.gpio_53 c22 */
 501                 OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)
 502
 503                 /* status2 0x4a100078 gpmc_ncs2.gpio_52 d21 */
 504                 OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)
 505
 506                 /* cmd0 0x4a100094 gpmc_ncs6.gpio_103 c24 */
 507                 OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3)
 508
 509                 /* cmd1 0x4a100096 gpmc_ncs7.gpio_104 d24 */
 510                 OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3)
 511
 512                 /* cmd2 0x4a100142 uart3_rts_sd.gpio_142 f28 */
 513                 OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3)
 514                 >;
 515         };
 516
 517         usb_ulpi_pins: pinmux_usb_ulpi_pins {
 518                 pinctrl-single,pins = <
 519                 OMAP4_IOPAD(0x196, MUX_MODE7)
 520                 OMAP4_IOPAD(0x198, MUX_MODE7)
 521                 OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE0)
 522                 OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE0)
 523                 OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE0)
 524                 OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE0)
 525                 OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE0)
 526                 OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE0)
 527                 OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE0)
 528                 OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE0)
 529                 OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE0)
 530                 OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE0)
 531                 OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE0)
 532                 OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE0)
 533                 >;
 534         };
 535
 536         /* usb0_otg_dp and usb0_otg_dm */
 537         usb_utmi_pins: pinmux_usb_utmi_pins {
 538                 pinctrl-single,pins = <
 539                 OMAP4_IOPAD(0x196, PIN_INPUT | MUX_MODE0)
 540                 OMAP4_IOPAD(0x198, PIN_INPUT | MUX_MODE0)
 541                 OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7)
 542                 OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7)
 543                 OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7)
 544                 OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7)
 545                 OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE7)
 546                 OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE7)
 547                 OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7)
 548                 OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7)
 549                 OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7)
 550                 OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7)
 551                 OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7)
 552                 OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7)
 553                 >;
 554         };
 555
 556         /*
 557          * Note that the v3.0.8 stock userspace dynamically remuxes uart1
 558          * rts pin probably for PM purposes to PIN_INPUT_PULLUP | MUX_MODE7
 559          * when not used. If needed, we can add rts pin remux later based
 560          * on power measurements.
 561          */
 562         uart1_pins: pinmux_uart1_pins {
 563                 pinctrl-single,pins = <
 564                 /* 0x4a10013c mcspi1_cs2.uart1_cts ag23 */
 565                 OMAP4_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE1)
 566
 567                 /* 0x4a10013e mcspi1_cs3.uart1_rts ah23 */
 568                 OMAP4_IOPAD(0x13e, MUX_MODE1)
 569
 570                 /* 0x4a100140 uart3_cts_rctx.uart1_tx f27 */
 571                 OMAP4_IOPAD(0x140, PIN_OUTPUT | MUX_MODE1)
 572
 573                 /* 0x4a1001ca dpm_emu14.uart1_rx aa3 */
 574                 OMAP4_IOPAD(0x1ca, PIN_INPUT_PULLUP | MUX_MODE2)
 575                 >;
 576         };
 577
 578         /* uart3_tx_irtx and uart3_rx_irrx */
 579         uart3_pins: pinmux_uart3_pins {
 580                 pinctrl-single,pins = <
 581                 OMAP4_IOPAD(0x196, MUX_MODE7)
 582                 OMAP4_IOPAD(0x198, MUX_MODE7)
 583                 OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7)
 584                 OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7)
 585                 OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7)
 586                 OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7)
 587                 OMAP4_IOPAD(0x1ba, MUX_MODE2)
 588                 OMAP4_IOPAD(0x1bc, PIN_INPUT | MUX_MODE2)
 589                 OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7)
 590                 OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7)
 591                 OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7)
 592                 OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7)
 593                 OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7)
 594                 OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7)
 595                 >;
 596         };
 597
 598         uart4_pins: pinmux_uart4_pins {
 599                 pinctrl-single,pins = <
 600                 OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0)               /* uart4_rx */
 601                 OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0)              /* uart4_tx */
 602                 OMAP4_IOPAD(0x110, PIN_INPUT_PULLUP | MUX_MODE5)        /* uart4_cts */
 603                 OMAP4_IOPAD(0x112, PIN_OUTPUT_PULLUP | MUX_MODE5)       /* uart4_rts */
 604                 >;
 605         };
 606
 607         mcbsp2_pins: pinmux_mcbsp2_pins {
 608                 pinctrl-single,pins = <
 609                 OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0)       /* abe_mcbsp2_clkx */
 610                 OMAP4_IOPAD(0x0f8, PIN_INPUT | MUX_MODE0)       /* abe_mcbsp2_dr */
 611                 OMAP4_IOPAD(0x0fa, PIN_OUTPUT | MUX_MODE0)      /* abe_mcbsp2_dx */
 612                 OMAP4_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0)       /* abe_mcbsp2_fsx */
 613                 >;
 614         };
 615
 616         mcbsp3_pins: pinmux_mcbsp3_pins {
 617                 pinctrl-single,pins = <
 618                 OMAP4_IOPAD(0x106, PIN_INPUT | MUX_MODE1)       /* abe_mcbsp3_dr */
 619                 OMAP4_IOPAD(0x108, PIN_OUTPUT | MUX_MODE1)      /* abe_mcbsp3_dx */
 620                 OMAP4_IOPAD(0x10a, PIN_INPUT | MUX_MODE1)       /* abe_mcbsp3_clkx */
 621                 OMAP4_IOPAD(0x10c, PIN_INPUT | MUX_MODE1)       /* abe_mcbsp3_fsx */
 622                 >;
 623         };
 624
 625         vibrator_direction_pin: pinmux_vibrator_direction_pin {
 626                 pinctrl-single,pins = <
 627                 OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1)      /* dmtimer8_pwm_evt (gpio_27) */
 628                 >;
 629         };
 630
 631         vibrator_enable_pin: pinmux_vibrator_enable_pin {
 632                 pinctrl-single,pins = <
 633                 OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1)      /* dmtimer9_pwm_evt (gpio_28) */
 634                 >;
 635         };
 636 };
 637
 638 &omap4_pmx_wkup {
 639         usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins {
 640                 /* gpio_wk0 */
 641                 pinctrl-single,pins = <
 642                 OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
 643                 >;
 644         };
 645 };
 646
 647 /*
 648  * As uart1 is wired to mdm6600 with rts and cts, we can use the cts pin for
 649  * uart1 wakeirq.
 650  */
 651 &uart1 {
 652         pinctrl-names = "default";
 653         pinctrl-0 = <&uart1_pins>;
 654         interrupts-extended = <&wakeupgen GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH
 655                                &omap4_pmx_core 0xfc>;
 656 };
 657
 658 &uart3 {
 659         interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
 660                                &omap4_pmx_core 0x17c>;
 661 };
 662
 663 &uart4 {
 664         pinctrl-names = "default";
 665         pinctrl-0 = <&uart4_pins>;
 666
 667         bluetooth {
 668                 compatible = "ti,wl1285-st";
 669                 enable-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>; /* gpio 174 */
 670                 max-speed = <3686400>;
 671         };
 672 };
 673
 674 &usbhsohci {
 675         phys = <&fsusb1_phy>;
 676         phy-names = "usb";
 677 };
 678
 679 &usbhsehci {
 680         phys = <&hsusb2_phy>;
 681 };
 682
 683 &usbhshost {
 684         port1-mode = "ohci-phy-4pin-dpdm";
 685         port2-mode = "ehci-tll";
 686 };
 687
 688 /* Internal UTMI+ PHY used for OTG, CPCAP ULPI PHY for detection and charger */
 689 &usb_otg_hs {
 690         interface-type = <1>;
 691         mode = <3>;
 692         power = <50>;
 693 };
 694
 695 &i2c4 {
 696         ak8975: magnetometer@c {
 697                 compatible = "asahi-kasei,ak8975";
 698                 reg = <0x0c>;
 699
 700                 vdd-supply = <&vhvio>;
 701
 702                 interrupt-parent = <&gpio6>;
 703                 interrupts = <15 IRQ_TYPE_EDGE_RISING>; /* gpio175 */
 704
 705                 rotation-matrix = "-1", "0", "0",
 706                                   "0", "1", "0",
 707                                   "0", "0", "-1";
 708
 709         };
 710
 711         lis3dh: accelerometer@18 {
 712                 compatible = "st,lis3dh-accel";
 713                 reg = <0x18>;
 714
 715                 vdd-supply = <&vhvio>;
 716
 717                 interrupt-parent = <&gpio2>;
 718                 interrupts = <2 IRQ_TYPE_EDGE_BOTH>; /* gpio34 */
 719
 720                 rotation-matrix = "0", "-1", "0",
 721                                   "1", "0", "0",
 722                                   "0", "0", "1";
 723         };
 724 };
 725
 726 &mcbsp2 {
 727         #sound-dai-cells = <0>;
 728         pinctrl-names = "default";
 729         pinctrl-0 = <&mcbsp2_pins>;
 730         status = "okay";
 731
 732         mcbsp2_port: port {
 733                 cpu_dai2: endpoint {
 734                         dai-format = "i2s";
 735                         remote-endpoint = <&cpcap_audio_codec0>;
 736                         frame-master = <&cpcap_audio_codec0>;
 737                         bitclock-master = <&cpcap_audio_codec0>;
 738                 };
 739         };
 740 };
 741
 742 &mcbsp3 {
 743         #sound-dai-cells = <0>;
 744         pinctrl-names = "default";
 745         pinctrl-0 = <&mcbsp3_pins>;
 746         status = "okay";
 747
 748         mcbsp3_port: port {
 749                 cpu_dai3: endpoint {
 750                         dai-format = "dsp_a";
 751                         frame-master = <&cpcap_audio_codec1>;
 752                         bitclock-master = <&cpcap_audio_codec1>;
 753                         remote-endpoint = <&cpcap_audio_codec1>;
 754                 };
 755         };
 756 };
 757
 758 &cpcap_audio_codec0 {
 759         remote-endpoint = <&cpu_dai2>;
 760 };
 761
 762 &cpcap_audio_codec1 {
 763         remote-endpoint = <&cpu_dai3>;
 764 };