arch/arm/boot/dts/omap3-gta04.dtsi

   1 /*
   2  * Copyright (C) 2013 Marek Belisko <marek@goldelico.com>
   3  *
   4  * Based on omap3-beagle-xm.dts
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License version 2 as
   8  * published by the Free Software Foundation.
   9  */
  10 /dts-v1/;
  11
  12 #include "omap36xx.dtsi"
  13 #include <dt-bindings/input/input.h>
  14
  15 / {
  16         model = "OMAP3 GTA04";
  17         compatible = "ti,omap3-gta04", "ti,omap36xx", "ti,omap3";
  18
  19         cpus {
  20                 cpu@0 {
  21                         cpu0-supply = <&vcc>;
  22                 };
  23         };
  24
  25         memory@80000000 {
  26                 device_type = "memory";
  27                 reg = <0x80000000 0x20000000>; /* 512 MB */
  28         };
  29
  30         aliases {
  31                 display0 = &lcd;
  32                 display1 = &tv0;
  33         };
  34
  35         /* fixed 26MHz oscillator */
  36         hfclk_26m: oscillator {
  37                 #clock-cells = <0>;
  38                 compatible = "fixed-clock";
  39                 clock-frequency = <26000000>;
  40         };
  41
  42         gpio-keys {
  43                 compatible = "gpio-keys";
  44
  45                 aux-button {
  46                         label = "aux";
  47                         linux,code = <KEY_PHONE>;
  48                         gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
  49                         wakeup-source;
  50                 };
  51         };
  52
  53         antenna-detect {
  54                 compatible = "gpio-keys";
  55
  56                 gps_antenna_button: gps-antenna-button {
  57                         label = "GPS_EXT_ANT";
  58                         linux,input-type = <EV_SW>;
  59                         linux,code = <SW_LINEIN_INSERT>;
  60                         gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* GPIO144 */
  61                         interrupt-parent = <&gpio5>;
  62                         interrupts = <16 IRQ_TYPE_EDGE_BOTH>;
  63                         debounce-interval = <10>;
  64                         wakeup-source;
  65                 };
  66         };
  67
  68         sound {
  69                 compatible = "ti,omap-twl4030";
  70                 ti,model = "gta04";
  71
  72                 ti,mcbsp = <&mcbsp2>;
  73         };
  74
  75         /* GSM audio */
  76         sound_telephony {
  77                 compatible = "simple-audio-card";
  78                 simple-audio-card,name = "GTA04 voice";
  79                 simple-audio-card,bitclock-master = <&telephony_link_master>;
  80                 simple-audio-card,frame-master = <&telephony_link_master>;
  81                 simple-audio-card,format = "i2s";
  82                 simple-audio-card,bitclock-inversion;
  83                 simple-audio-card,frame-inversion;
  84                 simple-audio-card,cpu {
  85                         sound-dai = <&mcbsp4>;
  86                 };
  87
  88                 telephony_link_master: simple-audio-card,codec {
  89                         sound-dai = <&gtm601_codec>;
  90                 };
  91         };
  92
  93         gtm601_codec: gsm_codec {
  94                 compatible = "option,gtm601";
  95                 #sound-dai-cells = <0>;
  96         };
  97
  98         spi_lcd: spi_lcd {
  99                 compatible = "spi-gpio";
 100                 #address-cells = <0x1>;
 101                 #size-cells = <0x0>;
 102                 pinctrl-names = "default";
 103                 pinctrl-0 = <&spi_gpio_pins>;
 104
 105                 gpio-sck = <&gpio1 12 GPIO_ACTIVE_HIGH>;
 106                 gpio-miso = <&gpio1 18 GPIO_ACTIVE_HIGH>;
 107                 gpio-mosi = <&gpio1 20 GPIO_ACTIVE_HIGH>;
 108                 cs-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
 109                 num-chipselects = <1>;
 110
 111                 /* lcd panel */
 112                 lcd: td028ttec1@0 {
 113                         compatible = "tpo,td028ttec1";
 114                         reg = <0>;
 115                         spi-max-frequency = <100000>;
 116                         spi-cpol;
 117                         spi-cpha;
 118
 119                         label = "lcd";
 120                         port {
 121                                 lcd_in: endpoint {
 122                                         remote-endpoint = <&dpi_out>;
 123                                 };
 124                         };
 125                 };
 126         };
 127
 128         backlight {
 129                 compatible = "pwm-backlight";
 130                 pwms = <&pwm11 0 12000000 0>;
 131                 pwm-names = "backlight";
 132                 brightness-levels = <0 11 20 30 40 50 60 70 80 90 100>;
 133                 default-brightness-level = <9>; /* => 90 */
 134                 pinctrl-names = "default";
 135                 pinctrl-0 = <&backlight_pins>;
 136         };
 137
 138         pwm11: dmtimer-pwm {
 139                 compatible = "ti,omap-dmtimer-pwm";
 140                 ti,timers = <&timer11>;
 141                 #pwm-cells = <3>;
 142         };
 143
 144         hsusb2_phy: hsusb2_phy {
 145                 compatible = "usb-nop-xceiv";
 146                 reset-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
 147                 #phy-cells = <0>;
 148         };
 149
 150         tv0: connector {
 151                 compatible = "composite-video-connector";
 152                 label = "tv";
 153
 154                 port {
 155                         tv_connector_in: endpoint {
 156                                 remote-endpoint = <&opa_out>;
 157                         };
 158                 };
 159         };
 160
 161         tv_amp: opa362 {
 162                 compatible = "ti,opa362";
 163                 enable-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;    /* GPIO_23 to enable video out amplifier */
 164
 165                 ports {
 166                         #address-cells = <1>;
 167                         #size-cells = <0>;
 168
 169                         port@0 {
 170                                 reg = <0>;
 171                                 opa_in: endpoint {
 172                                         remote-endpoint = <&venc_out>;
 173                                 };
 174                         };
 175
 176                         port@1 {
 177                                 reg = <1>;
 178                                 opa_out: endpoint {
 179                                         remote-endpoint = <&tv_connector_in>;
 180                                 };
 181                         };
 182                 };
 183         };
 184
 185         wifi_pwrseq: wifi_pwrseq {
 186                 compatible = "mmc-pwrseq-simple";
 187                 reset-gpios = <&tca6507 0 GPIO_ACTIVE_LOW>;     /* W2CBW003 reset through tca6507 */
 188         };
 189
 190         /* devconf0 setup for mcbsp1 clock pins */
 191         pinmux_mcbsp1@48002274 {
 192                 compatible = "pinctrl-single";
 193                 reg = <0x48002274 4>;   /* CONTROL_DEVCONF0 */
 194                 #address-cells = <1>;
 195                 #size-cells = <0>;
 196                 pinctrl-single,bit-per-mux;
 197                 pinctrl-single,register-width = <32>;
 198                 pinctrl-single,function-mask = <0x7>;   /* MCBSP1 CLK pinmux */
 199                 #pinctrl-cells = <2>;
 200                 pinctrl-names = "default";
 201                 pinctrl-0 = <&mcbsp1_devconf0_pins>;
 202                 mcbsp1_devconf0_pins: pinmux_mcbsp1_devconf0_pins {
 203                         /*                   offset bits mask */
 204                         pinctrl-single,bits = <0x00 0x08 0x1c>; /* set MCBSP1_CLKR */
 205                 };
 206         };
 207
 208         /* devconf1 setup for tvout pins */
 209         pinmux_tv_out@480022d8 {
 210                 compatible = "pinctrl-single";
 211                 reg = <0x480022d8 4>;   /* CONTROL_DEVCONF1 */
 212                 #address-cells = <1>;
 213                 #size-cells = <0>;
 214                 pinctrl-single,bit-per-mux;
 215                 pinctrl-single,register-width = <32>;
 216                 pinctrl-single,function-mask = <0x81>;  /* TV out pin control */
 217                 #pinctrl-cells = <2>;
 218                 pinctrl-names = "default";
 219                 pinctrl-0 = <&tv_acbias_devconf1_pins>;
 220                 tv_acbias_devconf1_pins: pinmux_tv_acbias_devconf1_pins {
 221                         /*                      offset  bits    mask */
 222                         pinctrl-single,bits = <0x00 0x40800 0x40800>;   /* set TVOUTBYPASS and TVOUTACEN */
 223                 };
 224         };
 225 };
 226
 227 &omap3_pmx_core {
 228         pinctrl-names = "default";
 229         pinctrl-0 = <
 230                         &hsusb2_pins
 231         >;
 232
 233         hsusb2_pins: pinmux_hsusb2_pins {
 234                 pinctrl-single,pins = <
 235                         OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi1_cs3.hsusb2_data2 */
 236                         OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_clk.hsusb2_data7 */
 237                         OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_simo.hsusb2_data4 */
 238                         OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_somi.hsusb2_data5 */
 239                         OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_cs0.hsusb2_data6 */
 240                         OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_cs1.hsusb2_data3 */
 241                 >;
 242         };
 243
 244         uart1_pins: pinmux_uart1_pins {
 245                 pinctrl-single,pins = <
 246                         OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0)                /* uart1_rx.uart1_rx */
 247                         OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0)               /* uart1_tx.uart1_tx */
 248                 >;
 249         };
 250
 251         uart2_pins: pinmux_uart2_pins {
 252                 pinctrl-single,pins = <
 253                         OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)                /* uart2_rx.uart2_rx */
 254                         OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)               /* uart2_tx.uart2_tx */
 255                 >;
 256         };
 257
 258         uart3_pins: pinmux_uart3_pins {
 259                 pinctrl-single,pins = <
 260                         OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)                /* uart3_rx.uart3_rx */
 261                         OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)               /* uart3_tx.uart3_tx */
 262                 >;
 263         };
 264
 265         mmc1_pins: pinmux_mmc1_pins {
 266                 pinctrl-single,pins = <
 267                         OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)         /* sdmmc1_clk.sdmmc1_clk */
 268                         OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)         /* sdmmc1_cmd.sdmmc1_cmd */
 269                         OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)         /* sdmmc1_dat0.sdmmc1_dat0 */
 270                         OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)         /* sdmmc1_dat1.sdmmc1_dat1 */
 271                         OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)         /* sdmmc1_dat2.sdmmc1_dat2 */
 272                         OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)         /* sdmmc1_dat3.sdmmc1_dat3 */
 273                 >;
 274         };
 275
 276         backlight_pins: backlight_pins_pinmux {
 277                 pinctrl-single,pins = <
 278                         OMAP3_CORE1_IOPAD(0x20ba, MUX_MODE3)            /* gpt11/gpio57 */
 279                 >;
 280         };
 281
 282         dss_dpi_pins: pinmux_dss_dpi_pins {
 283                 pinctrl-single,pins = <
 284                         OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
 285                         OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
 286                         OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
 287                         OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
 288                         OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
 289                         OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
 290                         OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
 291                         OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
 292                         OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
 293                         OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
 294                         OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
 295                         OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
 296                         OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
 297                         OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
 298                         OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
 299                         OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
 300                         OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
 301                         OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
 302                         OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
 303                         OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
 304                         OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
 305                         OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
 306                         OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)   /* dss_data18.dss_data18 */
 307                         OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)   /* dss_data19.dss_data19 */
 308                         OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)   /* dss_data20.dss_data20 */
 309                         OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)   /* dss_data21.dss_data21 */
 310                         OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)   /* dss_data22.dss_data22 */
 311                         OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
 312                 >;
 313        };
 314
 315         hdq_pins: hdq_pins {
 316                 pinctrl-single,pins = <
 317                         OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.hdq */
 318                 >;
 319         };
 320
 321         bmp085_pins: pinmux_bmp085_pins {
 322                 pinctrl-single,pins = <
 323                         OMAP3_CORE1_IOPAD(0x2136, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio113 */
 324                 >;
 325         };
 326
 327         bma180_pins: pinmux_bma180_pins {
 328                 pinctrl-single,pins = <
 329                         OMAP3_CORE1_IOPAD(0x213a, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio115 */
 330                 >;
 331         };
 332
 333         itg3200_pins: pinmux_itg3200_pins {
 334                 pinctrl-single,pins = <
 335                         OMAP3_CORE1_IOPAD(0x20b8, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio56 */
 336                 >;
 337         };
 338
 339         hmc5843_pins: pinmux_hmc5843_pins {
 340                 pinctrl-single,pins = <
 341                         OMAP3_CORE1_IOPAD(0x2134, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio112 */
 342                 >;
 343         };
 344
 345         penirq_pins: pinmux_penirq_pins {
 346                 pinctrl-single,pins = <
 347                         /* here we could enable to wakeup the cpu from suspend by a pen touch */
 348                         OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio160 */
 349                 >;
 350         };
 351
 352         camera_pins: pinmux_camera_pins {
 353                 pinctrl-single,pins = <
 354                         /* set up parallel camera interface */
 355                         OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_hs */
 356                         OMAP3_CORE1_IOPAD(0x210e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_vs */
 357                         OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE0) /* cam_xclka */
 358                         OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_pclk */
 359                         OMAP3_CORE1_IOPAD(0x2114, PIN_OUTPUT | MUX_MODE4) /* cam_fld = gpio_98 */
 360                         OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d0 */
 361                         OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d1 */
 362                         OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d2 */
 363                         OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d3 */
 364                         OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d4 */
 365                         OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d5 */
 366                         OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d6 */
 367                         OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d7 */
 368                         OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d8 */
 369                         OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d9 */
 370                         OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d10 */
 371                         OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d10 */
 372                         OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT | MUX_MODE0) /* cam_xclkb */
 373                         OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* cam_wen = gpio_167 */
 374                         OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLDOWN | MUX_MODE4) /* cam_strobe */
 375                 >;
 376         };
 377
 378         mcbsp1_pins: pinmux_mcbsp1_pins {
 379                 pinctrl-single,pins = <
 380                         OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT | MUX_MODE4)        /* mcbsp1_clkr.mcbsp1_clkr - gpio_156 FM interrupt */
 381                         OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE0)       /* mcbsp1_clkr.mcbsp1_fsr */
 382                         OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE0)       /* mcbsp1_dx.mcbsp1_dx */
 383                         OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT | MUX_MODE0)        /* mcbsp1_dx.mcbsp1_dr */
 384                         /* mcbsp_clks is used as PENIRQ */
 385                         /* OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT | MUX_MODE0)     /* mcbsp_clks.mcbsp_clks */
 386                         OMAP3_CORE1_IOPAD(0x2196, PIN_INPUT | MUX_MODE0)        /* mcbsp_clks.mcbsp1_fsx */
 387                         OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE0)        /* mcbsp1_clkx.mcbsp1_clkx */
 388                 >;
 389         };
 390
 391         mcbsp2_pins: pinmux_mcbsp2_pins {
 392                 pinctrl-single,pins = <
 393                         OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0)        /* mcbsp2_fsx.mcbsp2_fsx */
 394                         OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0)        /* mcbsp2_fsx.mcbsp2_clkx */
 395                         OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0)        /* mcbsp2_dr.mcbsp2_dr */
 396                         OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0)       /* mcbsp2_dr.mcbsp2_dx */
 397                 >;
 398         };
 399
 400         mcbsp3_pins: pinmux_mcbsp3_pins {
 401                 pinctrl-single,pins = <
 402                         OMAP3_CORE1_IOPAD(0x216c, PIN_OUTPUT | MUX_MODE0)       /* mcbsp3_dx.mcbsp3_dx */
 403                         OMAP3_CORE1_IOPAD(0x216e, PIN_INPUT | MUX_MODE0)        /* mcbsp3_dx.mcbsp3_dr */
 404                         OMAP3_CORE1_IOPAD(0x2170, PIN_INPUT | MUX_MODE0)        /* mcbsp3_clkx.mcbsp3_clkx */
 405                         OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE0)        /* mcbsp3_clkx.mcbsp3_fsx */
 406                 >;
 407         };
 408
 409         mcbsp4_pins: pinmux_mcbsp4_pins {
 410                 pinctrl-single,pins = <
 411                         OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLDOWN | MUX_MODE0)       /* mcbsp4_clkx.mcbsp4_clkx */
 412                         OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT_PULLDOWN | MUX_MODE0)       /* mcbsp4_clkx.mcbsp4_dr */
 413                         OMAP3_CORE1_IOPAD(0x218a, PIN_INPUT_PULLDOWN | MUX_MODE0)       /* mcbsp4_dx.mcbsp4_fsx */
 414                 >;
 415         };
 416 };
 417
 418 &omap3_pmx_core2 {
 419         pinctrl-names = "default";
 420         pinctrl-0 = <
 421                         &hsusb2_2_pins
 422         >;
 423
 424         hsusb2_2_pins: pinmux_hsusb2_2_pins {
 425                 pinctrl-single,pins = <
 426                         OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)            /* etk_d10.hsusb2_clk */
 427                         OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)            /* etk_d11.hsusb2_stp */
 428                         OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d12.hsusb2_dir */
 429                         OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d13.hsusb2_nxt */
 430                         OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d14.hsusb2_data0 */
 431                         OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d15.hsusb2_data1 */
 432                 >;
 433         };
 434
 435         spi_gpio_pins: spi_gpio_pinmux {
 436                 pinctrl-single,pins = <
 437                         OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE4) /* clk */
 438                         OMAP3630_CORE2_IOPAD(0x25e6, PIN_OUTPUT | MUX_MODE4) /* cs */
 439                         OMAP3630_CORE2_IOPAD(0x25e8, PIN_OUTPUT | MUX_MODE4) /* tx */
 440                         OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE4) /* rx */
 441                 >;
 442         };
 443 };
 444
 445 &i2c1 {
 446         clock-frequency = <2600000>;
 447
 448         twl: twl@48 {
 449                 reg = <0x48>;
 450                 interrupts = <7>; /* SYS_NIRQ cascaded to intc */
 451                 interrupt-parent = <&intc>;
 452
 453                 clocks = <&hfclk_26m>;
 454                 clock-names = "fck";
 455
 456                 twl_audio: audio {
 457                         compatible = "ti,twl4030-audio";
 458                         ti,enable-vibra = <1>;
 459                         codec {
 460                                 ti,ramp_delay_value = <3>;
 461                         };
 462                 };
 463
 464                 twl_power: power {
 465                         compatible = "ti,twl4030-power";
 466                         ti,use_poweroff;
 467                 };
 468         };
 469 };
 470
 471 #include "twl4030.dtsi"
 472 #include "twl4030_omap3.dtsi"
 473
 474 &i2c2 {
 475         clock-frequency = <400000>;
 476
 477         /* pressure sensor */
 478         bmp085@77 {
 479                 compatible = "bosch,bmp085";
 480                 reg = <0x77>;
 481                 pinctrl-names = "default";
 482                 pinctrl-0 = <&bmp085_pins>;
 483                 interrupt-parent = <&gpio4>;
 484                 interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* GPIO_113 */
 485         };
 486
 487         /* accelerometer */
 488         bma180@41 {
 489                 compatible = "bosch,bma180";
 490                 reg = <0x41>;
 491                 pinctrl-names = "default";
 492                 pintcrl-0 = <&bma180_pins>;
 493                 interrupt-parent = <&gpio4>;
 494                 interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_115 */
 495         };
 496
 497         /* gyroscope */
 498         itg3200@68 {
 499                 compatible = "invensense,itg3200";
 500                 reg = <0x68>;
 501                 pinctrl-names = "default";
 502                 pinctrl-0 = <&itg3200_pins>;
 503                 interrupt-parent = <&gpio2>;
 504                 interrupts = <24 IRQ_TYPE_EDGE_FALLING>; /* GPIO_56 */
 505         };
 506
 507         /* leds + gpios */
 508         tca6507: tca6507@45 {
 509                 compatible = "ti,tca6507";
 510                 #address-cells = <1>;
 511                 #size-cells = <0>;
 512                 reg = <0x45>;
 513
 514                 gpio-controller;
 515                 #gpio-cells = <2>;
 516
 517                 gta04_led0: red_aux@0 {
 518                         label = "gta04:red:aux";
 519                         reg = <0x0>;
 520                 };
 521
 522                 gta04_led1: green_aux@1 {
 523                         label = "gta04:green:aux";
 524                         reg = <0x1>;
 525                 };
 526
 527                 gta04_led3: red_power@3 {
 528                         label = "gta04:red:power";
 529                         reg = <0x3>;
 530                         linux,default-trigger = "default-on";
 531                 };
 532
 533                 gta04_led4: green_power@4 {
 534                         label = "gta04:green:power";
 535                         reg = <0x4>;
 536                 };
 537
 538                 wifi_reset: wifi_reset@6 { /* reference as <&tca_gpios 0 0> since it is currently the only GPIO */
 539                         reg = <0x6>;
 540                         compatible = "gpio";
 541                 };
 542         };
 543
 544         /* compass aka magnetometer */
 545         hmc5843@1e {
 546                 compatible = "honeywell,hmc5883l";
 547                 reg = <0x1e>;
 548                 pinctrl-names = "default";
 549                 pinctrl-0 = <&hmc5843_pins>;
 550                 interrupt-parent = <&gpio4>;
 551                 interrupts = <16 IRQ_TYPE_EDGE_FALLING>;        /* gpio112 */
 552         };
 553
 554         /* touchscreen */
 555         tsc2007@48 {
 556                 compatible = "ti,tsc2007";
 557                 reg = <0x48>;
 558                 pinctrl-names = "default";
 559                 pinctrl-0 = <&penirq_pins>;
 560                 interrupt-parent = <&gpio6>;
 561                 interrupts = <0 IRQ_TYPE_EDGE_FALLING>; /* GPIO_160 */
 562                 gpios = <&gpio6 0 GPIO_ACTIVE_LOW>;     /* GPIO_160 */
 563                 ti,x-plate-ohms = <600>;
 564                 touchscreen-size-x = <480>;
 565                 touchscreen-size-y = <640>;
 566                 touchscreen-max-pressure = <1000>;
 567                 touchscreen-fuzz-x = <3>;
 568                 touchscreen-fuzz-y = <8>;
 569                 touchscreen-fuzz-pressure = <10>;
 570                 touchscreen-inverted-y;
 571         };
 572
 573         /* RFID EEPROM */
 574         m24lr64@50 {
 575                 compatible = "atmel,24c64";
 576                 reg = <0x50>;
 577         };
 578 };
 579
 580 &i2c3 {
 581         clock-frequency = <100000>;
 582 };
 583
 584 &usb_otg_hs {
 585         interface-type = <0>;
 586         usb-phy = <&usb2_phy>;
 587         phys = <&usb2_phy>;
 588         phy-names = "usb2-phy";
 589         mode = <3>;
 590         power = <50>;
 591 };
 592
 593 &usbhshost {
 594         port2-mode = "ehci-phy";
 595 };
 596
 597 &usbhsehci {
 598         phys = <0 &hsusb2_phy>;
 599 };
 600
 601 &mmc1 {
 602         pinctrl-names = "default";
 603         pinctrl-0 = <&mmc1_pins>;
 604         vmmc-supply = <&vmmc1>;
 605         bus-width = <4>;
 606         ti,non-removable;
 607         broken-cd;      /* hardware has no CD */
 608 };
 609
 610 &mmc2 {
 611         vmmc-supply = <&vaux4>;
 612         bus-width = <4>;
 613         ti,non-removable;
 614         cap-power-off-card;
 615         mmc-pwrseq = <&wifi_pwrseq>;
 616 };
 617
 618 &mmc3 {
 619         status = "disabled";
 620 };
 621
 622 #define BIT(x) (1 << (x))
 623 &twl_gpio {
 624         /* pullups: BIT(2) */
 625         ti,pullups = <BIT(2)>;
 626         /*
 627          * pulldowns:
 628          * BIT(0),  BIT(1), BIT(6), BIT(7), BIT(8), BIT(13)
 629          * BIT(15), BIT(16), BIT(17)
 630          */
 631         ti,pulldowns = <(BIT(0) | BIT(1) | BIT(6) | BIT(7) | BIT(8) |
 632                          BIT(13) | BIT(15) | BIT(16) | BIT(17))>;
 633 };
 634
 635 &twl_keypad {
 636         status = "disabled";
 637 };
 638
 639 &uart1 {
 640         pinctrl-names = "default";
 641         pinctrl-0 = <&uart1_pins>;
 642 };
 643
 644 &uart2 {
 645         pinctrl-names = "default";
 646         pinctrl-0 = <&uart2_pins>;
 647 };
 648
 649 &uart3 {
 650         pinctrl-names = "default";
 651         pinctrl-0 = <&uart3_pins>;
 652         interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
 653 };
 654
 655 &charger {
 656         ti,bb-uvolt = <3200000>;
 657         ti,bb-uamp = <150>;
 658 };
 659
 660 /* spare */
 661 &vaux1 {
 662         regulator-min-microvolt = <2500000>;
 663         regulator-max-microvolt = <3000000>;
 664 };
 665
 666 /* sensors */
 667 &vaux2 {
 668         regulator-min-microvolt = <2800000>;
 669         regulator-max-microvolt = <2800000>;
 670         regulator-always-on;    /* we should never switch off while vio is on! */
 671 };
 672
 673 /* camera */
 674 &vaux3 {
 675         regulator-min-microvolt = <2500000>;
 676         regulator-max-microvolt = <2500000>;
 677 };
 678
 679 /* WLAN/BT */
 680 &vaux4 {
 681         regulator-min-microvolt = <2800000>;
 682         regulator-max-microvolt = <3150000>;
 683 };
 684
 685 /* GPS LNA */
 686 &vsim {
 687         regulator-min-microvolt = <2800000>;
 688         regulator-max-microvolt = <3150000>;
 689 };
 690
 691 /* Needed to power the DPI pins */
 692
 693 &vpll2 {
 694         regulator-always-on;
 695 };
 696
 697 &dss {
 698         pinctrl-names = "default";
 699         pinctrl-0 = < &dss_dpi_pins >;
 700
 701         status = "okay";
 702         vdds_dsi-supply = <&vpll2>;
 703
 704         port {
 705                 dpi_out: endpoint {
 706                         remote-endpoint = <&lcd_in>;
 707                         data-lines = <24>;
 708                 };
 709         };
 710 };
 711
 712 &venc {
 713         status = "okay";
 714
 715         vdda-supply = <&vdac>;
 716
 717         #address-cells = <1>;
 718         #size-cells = <0>;
 719
 720         port {
 721                 reg = <0>;
 722                 venc_out: endpoint {
 723                         remote-endpoint = <&opa_in>;
 724                         ti,channels = <1>;
 725                         ti,invert-polarity;
 726                 };
 727         };
 728 };
 729
 730 &gpmc {
 731         ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
 732
 733         nand@0,0 {
 734                 compatible = "ti,omap2-nand";
 735                 reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
 736                 interrupt-parent = <&gpmc>;
 737                 interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 738                              <1 IRQ_TYPE_NONE>; /* termcount */
 739                 ti,nand-ecc-opt = "ham1";
 740                 rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 741                 nand-bus-width = <16>;
 742                 #address-cells = <1>;
 743                 #size-cells = <1>;
 744
 745                 gpmc,device-width = <2>;
 746                 gpmc,cs-on-ns = <0>;
 747                 gpmc,cs-rd-off-ns = <44>;
 748                 gpmc,cs-wr-off-ns = <44>;
 749                 gpmc,adv-on-ns = <6>;
 750                 gpmc,adv-rd-off-ns = <34>;
 751                 gpmc,adv-wr-off-ns = <44>;
 752                 gpmc,oe-off-ns = <54>;
 753                 gpmc,we-off-ns = <40>;
 754                 gpmc,access-ns = <64>;
 755                 gpmc,rd-cycle-ns = <82>;
 756                 gpmc,wr-cycle-ns = <82>;
 757                 gpmc,wr-access-ns = <40>;
 758                 gpmc,wr-data-mux-bus-ns = <0>;
 759                 gpmc,sync-clk-ps = <0>;
 760
 761                 x-loader@0 {
 762                         label = "X-Loader";
 763                         reg = <0 0x80000>;
 764                 };
 765
 766                 bootloaders@80000 {
 767                         label = "U-Boot";
 768                         reg = <0x80000 0x1c0000>;
 769                 };
 770
 771                 bootloaders_env@240000 {
 772                         label = "U-Boot Env";
 773                         reg = <0x240000 0x40000>;
 774                 };
 775
 776                 kernel@280000 {
 777                         label = "Kernel";
 778                         reg = <0x280000 0x600000>;
 779                 };
 780
 781                 filesystem@880000 {
 782                         label = "File System";
 783                         reg = <0x880000 0>;     /* 0 = MTDPART_SIZ_FULL */
 784                 };
 785         };
 786 };
 787
 788 &mcbsp1 { /* FM Transceiver PCM */
 789         status = "ok";
 790         #sound-dai-cells = <0>;
 791         pinctrl-names = "default";
 792         pinctrl-0 = <&mcbsp1_pins>;
 793 };
 794
 795 &mcbsp2 { /* TPS65950 I2S */
 796         status = "ok";
 797         pinctrl-names = "default";
 798         pinctrl-0 = <&mcbsp2_pins>;
 799 };
 800
 801 &mcbsp3 { /* Bluetooth PCM */
 802         status = "ok";
 803         #sound-dai-cells = <0>;
 804         pinctrl-names = "default";
 805         pinctrl-0 = <&mcbsp3_pins>;
 806 };
 807
 808 &mcbsp4 { /* GSM voice PCM */
 809         status = "ok";
 810         #sound-dai-cells = <0>;
 811         pinctrl-names = "default";
 812         pinctrl-0 = <&mcbsp4_pins>;
 813 };
 814
 815 &hdqw1w {
 816         pinctrl-names = "default";
 817         pinctrl-0 = <&hdq_pins>;
 818 };
 819
 820 /* image signal processor within OMAP3 SoC */
 821 &isp {
 822         ports {
 823                 port@0 {
 824                         reg = <0>;
 825                         parallel_ep: endpoint {
 826                                 ti,isp-clock-divisor = <1>;
 827                                 ti,strobe-mode;
 828                                 bus-width = <8>;/* Used data lines */
 829                                 data-shift = <2>; /* Lines 9:2 are used */
 830                                 hsync-active = <0>; /* Active low */
 831                                 vsync-active = <1>; /* Active high */
 832                                 data-active = <1>;/* Active high */
 833                                 pclk-sample = <1>;/* Falling */
 834                         };
 835                 };
 836                 /* port@1 and port@2 are not used by GTA04 */
 837         };
 838 };