Merge tag 'mmc-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
[sfrench/cifs-2.6.git] / arch / arm / boot / dts / omap3-cm-t3730.dts
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Support for CompuLab CM-T3730
4  */
5 /dts-v1/;
6
7 #include "omap36xx.dtsi"
8 #include "omap3-cm-t3x30.dtsi"
9
10 / {
11         model = "CompuLab CM-T3730";
12         compatible = "compulab,omap3-cm-t3730", "ti,omap36xx", "ti,omap3";
13
14         wl12xx_vmmc2: wl12xx_vmmc2 {
15                 compatible = "regulator-fixed";
16                 regulator-name = "vw1271";
17                 pinctrl-names = "default";
18                 pinctrl-0 = <&wl12xx_gpio>;
19                 regulator-min-microvolt = <1800000>;
20                 regulator-max-microvolt = <1800000>;
21                 gpio = <&gpio3 9 GPIO_ACTIVE_HIGH>;   /* gpio73 */
22                 startup-delay-us = <20000>;
23                 enable-active-high;
24         };
25
26         wl12xx_vaux2: wl12xx_vaux2 {
27                 compatible = "regulator-fixed";
28                 regulator-name = "vwl1271_vaux2";
29                 regulator-min-microvolt = <1800000>;
30                 regulator-max-microvolt = <1800000>;
31                 vin-supply = <&vaux2>;
32         };
33 };
34
35 &omap3_pmx_wkup {
36         dss_dpi_pins_cm_t3730: pinmux_dss_dpi_pins_cm_t3730 {
37                 pinctrl-single,pins = <
38                         OMAP3_WKUP_IOPAD(0x2a08, PIN_OUTPUT | MUX_MODE3)   /* sys_boot0.dss_data18 */
39                         OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3)   /* sys_boot1.dss_data19 */
40                         OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3)   /* sys_boot3.dss_data20 */
41                         OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3)   /* sys_boot4.dss_data21 */
42                         OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3)   /* sys_boot5.dss_data22 */
43                         OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3)   /* sys_boot6.dss_data23 */
44                 >;
45         };
46 };
47
48 &omap3_pmx_core {
49
50         mmc2_pins: pinmux_mmc2_pins {
51                 pinctrl-single,pins = <
52                         OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
53                         OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
54                         OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
55                         OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
56                         OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
57                         OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
58                 >;
59         };
60
61         wl12xx_gpio: pinmux_wl12xx_gpio {
62                 pinctrl-single,pins = <
63                         OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4)       /* dss_data3.gpio_73 */
64                         OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE4)        /* sdmmc2_dat4.gpio_136 */
65                 >;
66         };
67 };
68
69 &mmc2 {
70         pinctrl-names = "default";
71         pinctrl-0 = <&mmc2_pins>;
72         vmmc-supply = <&wl12xx_vmmc2>;
73         vqmmc-supply = <&wl12xx_vaux2>;
74         non-removable;
75         bus-width = <4>;
76         cap-power-off-card;
77
78         #address-cells = <1>;
79         #size-cells = <0>;
80         wlcore: wlcore@2 {
81                 compatible = "ti,wl1271";
82                 reg = <2>;
83                 interrupt-parent = <&gpio5>;
84                 interrupts = <8 IRQ_TYPE_EDGE_RISING>; /* gpio 136 */
85                 ref-clock-frequency = <38400000>;
86         };
87 };
88
89 &dss {
90         status = "ok";
91
92         pinctrl-names = "default";
93         pinctrl-0 = <
94                 &dss_dpi_pins_common
95                 &dss_dpi_pins_cm_t3730
96         >;
97 };
98