arch/arm/boot/dts/kirkwood-nsa310-common.dtsi

   1 #include "kirkwood.dtsi"
   2 #include "kirkwood-6281.dtsi"
   3
   4 / {
   5         model = "ZyXEL NSA310";
   6
   7         mbus {
   8                 pcie-controller {
   9                         status = "okay";
  10
  11                         pcie@1,0 {
  12                                 status = "okay";
  13                         };
  14                 };
  15         };
  16
  17         ocp@f1000000 {
  18                 pinctrl: pinctrl@10000 {
  19
  20                         pmx_usb_power_off: pmx-usb-power-off {
  21                                 marvell,pins = "mpp21";
  22                                 marvell,function = "gpio";
  23                         };
  24                         pmx_pwr_off: pmx-pwr-off {
  25                                 marvell,pins = "mpp48";
  26                                 marvell,function = "gpio";
  27                         };
  28
  29                 };
  30
  31                 serial@12000 {
  32                         status = "ok";
  33                 };
  34
  35                 sata@80000 {
  36                         status = "okay";
  37                         nr-ports = <2>;
  38                 };
  39         };
  40
  41         gpio_poweroff {
  42                 compatible = "gpio-poweroff";
  43                 pinctrl-0 = <&pmx_pwr_off>;
  44                 pinctrl-names = "default";
  45                 gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
  46         };
  47
  48         regulators {
  49                 compatible = "simple-bus";
  50                 #address-cells = <1>;
  51                 #size-cells = <0>;
  52                 pinctrl-0 = <&pmx_usb_power_off>;
  53                 pinctrl-names = "default";
  54
  55                 usb0_power_off: regulator@1 {
  56                         compatible = "regulator-fixed";
  57                         reg = <1>;
  58                         regulator-name = "USB Power Off";
  59                         regulator-min-microvolt = <5000000>;
  60                         regulator-max-microvolt = <5000000>;
  61                         regulator-always-on;
  62                         regulator-boot-on;
  63                         gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
  64                 };
  65         };
  66 };
  67
  68 &nand {
  69         status = "okay";
  70         chip-delay = <35>;
  71
  72         partition@0 {
  73                 label = "uboot";
  74                 reg = <0x0000000 0x0100000>;
  75                 read-only;
  76         };
  77         partition@100000 {
  78                 label = "uboot_env";
  79                 reg = <0x0100000 0x0080000>;
  80         };
  81         partition@180000 {
  82                 label = "key_store";
  83                 reg = <0x0180000 0x0080000>;
  84         };
  85         partition@200000 {
  86                 label = "info";
  87                 reg = <0x0200000 0x0080000>;
  88         };
  89         partition@280000 {
  90                 label = "etc";
  91                 reg = <0x0280000 0x0a00000>;
  92         };
  93         partition@c80000 {
  94                 label = "kernel_1";
  95                 reg = <0x0c80000 0x0a00000>;
  96         };
  97         partition@1680000 {
  98                 label = "rootfs1";
  99                 reg = <0x1680000 0x2fc0000>;
 100         };
 101         partition@4640000 {
 102                 label = "kernel_2";
 103                 reg = <0x4640000 0x0a00000>;
 104         };
 105         partition@5040000 {
 106                 label = "rootfs2";
 107                 reg = <0x5040000 0x2fc0000>;
 108         };
 109 };