arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts

   1 // SPDX-License-Identifier: GPL-2.0
   2 /dts-v1/;
   3
   4 #include "kirkwood.dtsi"
   5 #include "kirkwood-6281.dtsi"
   6
   7 / {
   8         model = "Globalscale Technologies Guruplug Server Plus";
   9         compatible = "globalscale,guruplug-server-plus", "globalscale,guruplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
  10
  11         memory {
  12                 device_type = "memory";
  13                 reg = <0x00000000 0x20000000>;
  14         };
  15
  16         chosen {
  17                 bootargs = "console=ttyS0,115200n8 earlyprintk";
  18                 stdout-path = &uart0;
  19         };
  20
  21         ocp@f1000000 {
  22                 pinctrl: pin-controller@10000 {
  23                         pmx_led_health_r: pmx-led-health-r {
  24                                 marvell,pins = "mpp46";
  25                                 marvell,function = "gpio";
  26                         };
  27                         pmx_led_health_g: pmx-led-health-g {
  28                                 marvell,pins = "mpp47";
  29                                 marvell,function = "gpio";
  30                         };
  31                         pmx_led_wmode_r: pmx-led-wmode-r {
  32                                 marvell,pins = "mpp48";
  33                                 marvell,function = "gpio";
  34                         };
  35                         pmx_led_wmode_g: pmx-led-wmode-g {
  36                                 marvell,pins = "mpp49";
  37                                 marvell,function = "gpio";
  38                         };
  39                 };
  40                 serial@12000 {
  41                         status = "ok";
  42                 };
  43
  44                 sata@80000 {
  45                         status = "okay";
  46                         nr-ports = <1>;
  47                 };
  48
  49                 /* AzureWave AW-GH381 WiFi/BT */
  50                 mvsdio@90000 {
  51                         status = "okay";
  52                         non-removable;
  53                 };
  54         };
  55
  56         gpio-leds {
  57                 compatible = "gpio-leds";
  58                 pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g
  59                               &pmx_led_wmode_r &pmx_led_wmode_g >;
  60                 pinctrl-names = "default";
  61
  62                 health-r {
  63                         label = "guruplug:red:health";
  64                         gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
  65                 };
  66                 health-g {
  67                         label = "guruplug:green:health";
  68                         gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
  69                 };
  70                 wmode-r {
  71                         label = "guruplug:red:wmode";
  72                         gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
  73                 };
  74                 wmode-g {
  75                         label = "guruplug:green:wmode";
  76                         gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
  77                 };
  78         };
  79 };
  80
  81 &nand {
  82         status = "okay";
  83
  84         partition@0 {
  85                 label = "u-boot";
  86                 reg = <0x00000000 0x00100000>;
  87                 read-only;
  88         };
  89
  90         partition@100000 {
  91                 label = "uImage";
  92                 reg = <0x00100000 0x00400000>;
  93         };
  94
  95         partition@500000 {
  96                 label = "data";
  97                 reg = <0x00500000 0x1fb00000>;
  98         };
  99 };
 100
 101 &mdio {
 102         status = "okay";
 103
 104         ethphy0: ethernet-phy@0 {
 105                 /* Marvell 88E1121R */
 106                 compatible = "ethernet-phy-id0141.0cb0",
 107                              "ethernet-phy-ieee802.3-c22";
 108                 reg = <0>;
 109         };
 110
 111         ethphy1: ethernet-phy@1 {
 112                 /* Marvell 88E1121R */
 113                 compatible = "ethernet-phy-id0141.0cb0",
 114                              "ethernet-phy-ieee802.3-c22";
 115                 reg = <1>;
 116         };
 117 };
 118
 119 &eth0 {
 120         status = "okay";
 121         ethernet0-port@0 {
 122                 phy-handle = <&ethphy0>;
 123                 phy-connection-type = "rgmii-id";
 124         };
 125 };
 126
 127 &eth1 {
 128         status = "okay";
 129         ethernet1-port@0 {
 130                 phy-handle = <&ethphy1>;
 131                 phy-connection-type = "rgmii-id";
 132         };
 133 };